• Full Text
    • Scholarly Journal

    Optimization of Process Parameters for Wire Electrical Discharge Machining of 9Cr18Mov Based on Grey Relational Analysis

    ; 
    ; 
    ; 
    ; 
    ; et al. 
    ; 
    ; 
    ; 
    ; 
    ; 
    . 
    ; Basel Vol. 13, Iss. 5,  (2025): 1547.     DOI:10.3390/pr13051547
    PDF CiteCite
    Copy URLPrintAll Options

    References (33)

    • 1.

      Robotic slicing of fruits and vegetables: Modeling the effects of fracture toughness and knife geometry

      P. Jamdagni; Y.-B. Jia. Proceedings of the 2021 IEEE International Conference on Robotics and Automation (ICRA).
    • 2.

      Nickel-Titanium Alloy Laser Micromachining: A Review of Nitinol Laser Processes and Optimization for High-Speed Laser Cutting

      C.R. Otto; M. Vaseghi; K. Davami. Adv. Eng. Mater Vol. 26, (2024).
    • 3.

      Study on the mechanism of burr formation in ultrasonic vibration-assisted honing 9Cr18MoV valve sleeve

      S. Schuldt; G. Arnold; J. Kowalewski; Y. Schneider; H. Rohm. Adv. Manuf(2024).
    • 4.

      Machining characteristics and optimization of 10CrNi3Mo alloy steel by WEDM

      K.-M. Xiao; Z.-D. Liu; L.-L. Kong; W.-N. Lei. Mater. Manuf. Process Vol. 39, (2024).
    • 5.

      Study on orthogonal optimization of process parameters for SiCp/Al composite materials by WEDM

      Z. Sun; L.-L. Kong; W.-N. Lei; Y.-F. He. Mater. Manuf. Process Vol. 40, (2024).
    • 6.

      Influences of single-pulse energy distribution on WEDM cutting efficiency

      Y.-Q. Zhang; Z.-D. Liu; H.-W. Pan; M.-B. Qiu. Mater. Manuf. Process Vol. 39, (2024).
    • 7.

      Atomic-scale planarization surface of quartz glass induced by novel green chemical mechanical polishing using three ingredients

      D Wang; L Liu; Z Zhang; Q Peng; C Shi; X Liu; X Liu; H Zhou; W Wen. Mater. Today Sustain Vol. 25, (2024).
    • 8.

      Research on microstructure evolution and surface quality of WEDM for magnetic refrigerant rare-earth gadolinium

      L.-Y. Sun; S.-L. Shi; Z.-X. Li; K.-P. Rajurkar. Surf. Topogr.-Metrol Vol. 12, (2024).
    • 9.

      Refined modeling and experimental verification of a torque motor for an electro-hydraulic servo valve

      CHEN Zhichuang; GE Shenghong; Y Jiang; W Cheng; ZHU Yuchuan. Chin. J. Aeronaut Vol. 36, (2023): 302-317.
    • 10.

      Micro/nano incremental material removal mechanisms in high-frequency ultrasonic vibration-assisted cutting of 316L stainless steel

      X.-L. Liang; C.-B. Zhang; C.-F. Cheng; C. Wang; K. Li; B. Bulla. Int. J. Mach. Tools. Manuf Vol. 191, (2023).
    • 11.

      Experimental Study on EDM of CFRP Based on Graphene Aqueous Solution

      N. Chen; L.-L. Kong; W.-N. Lei; R. Qiu. Mater. Manuf. Proc Vol. 38, (2023).
    • 12.

      Study on the mechanism of burr formation by simulation and experiment in ultrasonic vibration-assisted micromilling

      YB Zhang; ZH Yuan; B Fang; LY Gao; ZY Chen; GS Su. Micromachines Vol. 14, (2023).
    • 13.

      Inhibition Method of Heat Affected Zone in Electrical Discharge Machining of CFRPs

      Y.-J. Zhao; J.-B. Geng; X.-D. Yang. Acta Aeron. Astron. Sin Vol. 43, (2022).
    • 14.

      Repeated low-velocity impact responses of SiC particle reinforced Al metal-matrix composites

      R. Ekici; E. Kosedag; M. Demir. Ceram. Int Vol. 48, (2022).
    • 15.

      EDM of Ti6Al4V Under Nano-graphene Mixed Dielectric: A Detailed Roughness Analysis

      I. Kashif; M. Asad; A. Saqib; V. Kumar. Inter. J. Adv. Manuf. Technol Vol. 16, (2022).
    • 16.

      Study on optimization of WEDM process parameters on stainless steel

      K Natarajan; H Ramakrishnan; A Gacem. J. Nanomater Vol. 2022, (2022).
    • 17.

      Predictions and Experiments on the Distortion of the 20Cr2Ni4A C-ring during Carburizing and Quenching Process

      Y.-M. Yan; Y.-J. Xue; W.-C. Yu; K. Liu; M.-Q. Wang; X.-M. Wang; L.-Q. Ni. Materials Vol. 15, (2022).
    • 18.

      Experimental Analysis of Microhardness Changes of Subsurface Areas Affected by WEDM

      K. Mouralova; S. Michna; R. Zahradnicek; J. Bednar; T. Plichta; J. Fries. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng Vol. 236, (2022).
    • 19.

      CFD-based physical failure modeling of direct-drive electro-hydraulic servo valve spool and sleeve

      G.-Q. Huang; J.-C. Mi; C. Yang; J. Yu. Sensors Vol. 22, (2022).
    • 20.

      Study on the Influencee of Zinc-Coated Wire Material on 3D Profile Machining of Inconel 825 Alloy Using WEDM Process

      S. Arulselvan; D. Ravindran; G. Selvakumar; A.A.M. Moshi. Surf. Rev. Lett Vol. 29, (2022).