It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Nowadays, the Global Navigation Satellite System (GNSS) is widely used in many applications. As a new system, China's BeiDou navigation system (BDS) is emerging in recent years. The last satellite of the third generation global BeiDou navigation system (BDS-3) has been successfully launched on June 23 in 2020, which means that BDS can offer navigation services worldwide. We evaluate the quality of BDS signals and analyze the performance of BDS positioning based on the smartphone in Espoo, Finland. The static and kinematic experiments were implemented in the parking lot of the Finish Geospatial Research Institute (FGI) and a highway route in Espoo, respectively. Experimental results show that BDS has good satellite visibility and geometric distribution. The signal carrier-to-noise density ratio (C/N0) of BDS-2 reaches 34.22 dB-Hz, which is comparable to the Global Positioning System (GPS). However, the signal carrier-to-noise density of BDS-3 is slightly lower than BDS-2, which is due to the significant number of BDS-3 satellites at low elevation angles. The horizontal precision of BDS positioning in the static and kinematic experiment is comparable to GPS in the east direction and slightly inferior to GPS in the north direction. However, the BDS shows poor precision in the up direction. In addition, the integration of BDS with other GNSS systems can significantly improve the positioning precision. This study intends to provide a reference for further research on the BDS global Positioning, Navigation, and Timing (PNT) services, particularly for LBS and smartphone positioning.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 School of Automation, Nanjing University of Science and Technology, Nanjing, 210094, China; School of Automation, Nanjing University of Science and Technology, Nanjing, 210094, China
2 Department of Remote Sensing and Photogrammetry, Finnish Geospatial Research Institute, FI-02431 Kirkkonummi, Finland; Department of Remote Sensing and Photogrammetry, Finnish Geospatial Research Institute, FI-02431 Kirkkonummi, Finland
3 Department of Geomatics Engineering, University of Calgary, 2500 University Dr NW, Calgary, Canada; Department of Geomatics Engineering, University of Calgary, 2500 University Dr NW, Calgary, Canada