Content area
Abstract
The pultrusion process is an efficient technology for the production of composite material profiles. Thanks to this positive feature, several studies have been carried out, either to expand the range of products made using the pultrusion technology, or improve its already high production rate. This study presents a process derived from the traditional pultrusion technology named "Step Pultrusion Process Technology" (SPPT). Using the Step Pultrusion process, the final section of the composite profiles is obtainable by means of a progressive cross section increasing through several resin cure stations. This progressive increasing of the composite cross section means that a higher degree of cure level can be attained at the die exit point of the last die. Mechanical test results of the manufactured pultruded samples have been used to compare both the traditional and the Step Pultrusion processes. Finally, there is a discussion on ways to improve the new Step Pultrusion process even further.[PUBLICATION ABSTRACT]