ARTICLE
Received 18 Apr 2013 | Accepted 1 Aug 2013 | Published 29 Aug 2013
Jeongwan Jin1, Joshua A. Slater1, Erhan Saglamyurek1, Neil Sinclair1, Mathew George2,w, Raimund Ricken2, Daniel Oblak1, Wolfgang Sohler2 & Wolfgang Tittel1
Quantum memories allowing reversible transfer of quantum states between light and matter are central to quantum repeaters, quantum networks and linear optics quantum computing. Signicant progress regarding the faithful transfer of quantum information has been reported in recent years. However, none of these demonstrations conrm that the re-emitted photons remain suitable for two-photon interference measurements, such as C-NOT gates and Bell-state measurements, which constitute another key ingredient for all aforementioned applications. Here, using pairs of laser pulses at the single-photon level, we demonstrate two-photon interference and Bell-state measurements after either none, one or both pulses have been reversibly mapped to separate thulium-doped lithium niobate waveguides. As the interference is always near the theoretical maximum, we conclude that our solid-state quantum memories, in addition to faithfully mapping quantum information, also preserve the entire photonic wavefunction. Hence, our memories are generally suitable for future applications of quantum information processing that require two-photon interference.
DOI: 10.1038/ncomms3386
Two-photon interference of weak coherent laser pulses recalled from separate solid-state quantum memories
1 Institute for Quantum Science and Technology, Department of Physics & Astronomy, University of Calgary, 2500 University Drive NW, Calgary, Alberta T2N 1N4, Canada. 2 Department of PhysicsApplied Physics, University of Paderborn, Warburger Strasse 100, 33095 Paderborn, Germany. w Present address: Department of Physics, CMS College, Kottayam 686001, India. Correspondence and requests for materials should be addressed to W. T.(email: mailto:[email protected]
Web End [email protected] ).
NATURE COMMUNICATIONS | 4:2386 | DOI: 10.1038/ncomms3386 | http://www.nature.com/naturecommunications
Web End =www.nature.com/naturecommunications 1
& 2013 Macmillan Publishers Limited. All rights reserved.
ARTICLE NATURE COMMUNICATIONS | DOI: 10.1038/ncomms3386
When two indistinguishable single photons impinge on a 50/50 beam splitter (BS) from different input ports, they bunch and leave together by the same output
port. This two-photon interference, named the HongOu Mandel (HOM) effect1, is due to destructive interference between the probability amplitudes associated with both input photons being transmitted or both reected; see Fig. 1. As no such interference occurs for distinguishable input photons, the interference visibility V provides a convenient way to verify that two photons are indistinguishable in all degrees of freedom, that is, spatial, temporal, spectral and polarization modes. The visibility is dened as
V Rmax Rmin=Rmax; 1
where Rmin and Rmax denote the rate with which photons are
detected in the two output ports in coincidence if the incoming photons are indistinguishable and distinguishable, respectively. Consequently, the HOM effect has been employed to characterize the indistinguishability of photons emitted from a variety of sources, including parametric down-conversion crystals2, trapped neutral atoms3,4, trapped ions5, quantum dots68, organic molecules9, nitrogen-vacancy centres in diamond10,11 and atomic vapours1216. Further, two-photon interference is at the heart of linear optics Bell-state measurements17, and, as such, has already enabled experimental quantum dense coding, quantum teleportation and entanglement swapping18. In parallel, recent reports have shown notable progress in mapping light to and from atoms, for example, demonstrating the faithful transfer of quantum information from photons in pure and entangled qubit states4,1923. However, to date, the possibility to perform Bell-state measurements with photons that have previously been stored in a quantum memory, as required for advanced applications of quantum information processing, has not yet been established. For these measurements to succeed, photons need to remain indistinguishable in all degrees of freedom, which is more restrictive than the faithful recall of quantum information encoded into a single degree of freedom. Indeed, taking into account that photons may or may not have been stored before the measurement, this criterion amounts to the requirement that a quantum memory preserves a photons wavefunction during storage. Similar to the case of photon sources, the criterion of indistinguishability is best assessed using HOM interference, provided single-photon detectors are employed.
When using single-photon Fock states at the memory inputs, the HOM visibility given in equation (1) theoretically reaches 100% as illustrated in Fig. 1. However, with phase-randomized laser pulses
obeying the Poissonian photon-number statistics, as in our demonstration, the maximally achievable visibility is 50% (ref.24), irrespective of the mean photon number (see Supplementary Note 1). Nevertheless, attenuated laser pulses are perfectly suitable for assessing the effect of our quantum memories on the photonic wavefunction. Any reduction of indistinguishability due to storage causes a reduction of visibility, albeit from maximally 50%.
Here we demonstrate two-photon interference as well as a Bell-state measurement after either none, one or both weak coherent pulses have been reversibly mapped to separate thulium-doped lithium niobate (Ti:Tm:LiNbO3) waveguides using the atomic frequency comb (AFC) memory protocol20,21,25. The measured interference visibility is always near the theoretical maximum, which veries that the reversible mapping of the pulses to our solid-state quantum memories preserves the entire photonic wavefunction. Thus, we show that our memories are generally suitable for use in all quantum information processing applications that rely on two-photon interference26,27. This approach extends the characterization of quantum memories using attenuated laser pulses28 from assessing the preservation of quantum information during storage to assessing the preservation of the entire wave-function, and from rst- to second-order interference.
ResultsExperimental overview. Our experimental set-up, depicted in Fig. 2, consists of two cryogenically cooled solid-state quantum memories, elements used to generate optical pulses (that either allow preparing or probing the quantum memories) and devices used to analyse the probe pulses after storage. Light from a 795.43 nm wavelength continuous wave (CW) laser passes through an acousto-optic modulator (AOM) driven by a sinusoidally varying signal. For the memory preparation, we use the AOMs rst negative diffraction order, which is bre coupled into a phase modulator and, via a BS, two polarization controllers and two micro-electromechanical switches, injected from the back into two Ti:Tm:LiNbO3 waveguides (labelled A and B) cooled to3 K (ref. 29). Waveguide A is placed inside a superconducting solenoid. Using a linear frequency-chirping technique20, we tailor AFCs with 600 MHz bandwidth and a few tens of MHz peak spacing, depending on the experiment, into the inhomogeneously broadened absorption spectrum of the thulium ions, as shown in Fig. 3. After 3 ms memory preparation time and 2 ms wait time, we have a 3 ms period during which we store and recall many probe pulses. The 8 ns-long probe pulses with E60 MHz Fourier-limited bandwidth are derived from the rst positive diffraction order of the AOM output at a repetition rate of
| [afii9820](in) = | 1 |1
i | 0 |1+1 + |1 |1 |1 |1 + i |1+1 | 0
| [afii9820](out) =
Figure 1 | Principle of HOM interference. Illustration of HOM interference in the case of single photons at BS input |c(in)S |1,10S, where the prime on
the latter input indicates the possibility to distinguish that input photon from the other in some degree of freedom, for example, by being polarized orthogonally. The four possible paths of the photons are illustrated, together with their corresponding output states. If the input photons are indistinguishable with respect to all degrees of freedom, we can ignore the primes in the output states and the paths shown in the two central pictures are identical and, because of the different signs, thus cancel. This leaves in the output state |c(out)S only the possibilities in which photons bunch. For distinguishable photons, for example, having orthogonal polarizations, all paths are distinguishable and all terms remain in |c(out)S.
2 NATURE COMMUNICATIONS | 4:2386 | DOI: 10.1038/ncomms3386 | http://www.nature.com/naturecommunications
Web End =www.nature.com/naturecommunications
& 2013 Macmillan Publishers Limited. All rights reserved.
NATURE COMMUNICATIONS | DOI: 10.1038/ncomms3386 ARTICLE
Pulse-tube cooler ~3 K
Si-APD 1
10 km delay line
Q+HWP
50/50
HOM-BS
NDF
A
MEMS
PBS
Q+HWP
AOM
Laser
B
795.43 nm
+1
NDF
1
PC
Si-APD 2
Phase modulator
BS
Figure 2 | Experimental set-up. We employ solid-state quantum memories, more precisely thulium-doped lithium-niobate waveguides, in conjunction with the AFC quantum memory protocol25 (see Methods). Using an acousto-optic modulator (AOM) followed by a polarizing beam splitter (PBS) and a neutral-density lter (NDF), we generate weak probe pulses that, after polarization adjustment by a quarter- and a half-wave plate (Q HWP), are
directed to our two memories. After passing through a set of micro electromechanical switches (MEMS), we interfere various combinations of recalled and non-stored (that is, directly transmitted) pulses on a 50/50 BS (HOM-BS) and detect them on silicon avalanche-photodiode (Si-APD)-based detectors as described in the main text.
a b
Memory A Memory A Memory B
4
4
4
3
3
3
Optical depth
2
Optical depth
2
2
1
1
1
0 300 200 100 0 100 200 300
0 300 200 100 0 100 200 300
0 300 200 100 0 100 200 300
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Figure 3 | Absorption spectra of quantum memories. Measured absorption spectra of AFCs prepared in Ti:Tm:LiNbO3 waveguides using frequency-selective optical pumping for the (a) single-memory and (b) two-memory congurations (red traces). The light grey trace in a shows the optical depth when the memory is inactive, that is, no AFC is prepared. The AFC bandwidths are set to 600 MHz, which is much wider than that of the stored pulses (about 60 MHz). The AFC peak spacing in a is D 33 MHz and in b D 20 MHz, yielding storage times of 1/D 30 and 50 ns, respectively. In the
depicted AFC for the single-memory conguration (a), a 133 Gauss magnetic eld is applied along the c axis of crystal Alocated inside the magnet solenoid (see Fig. 2)causing the excited and ground states to split into two long-lived nuclear Zeeman sublevels. The resulting splitting differenceof D/2E17 MHz gives the optimal memory efciency. In the two-memory conguration (b) it is important to note that memory B is located outside the solenoid and thus experiences a different eld than memory A. To obtain recall efciencies that are reasonably similar, at the expense of being non-optimal, we set the magnetic eld at memory A to 900 G (see Methods).
2.53 MHz. Each pulse is divided into two spatial modes by a half-wave plate (HWP) followed by a polarizing BS. Pulses in both spatial modes are attenuated by neutral-density lters and coupled into optical bres and injected from the front into the Ti:Tm:LiNbO3 waveguides. After exiting the memories (that is, either after storage or direct transmission), the pulses pass quarter- and HWPs used to control their polarizations at the 50/50 BS (HOM-BS) where the two-photon interference occurs. It is noteworthy that, to avoid rst-order interference, pulses passing through memory A propagate through a 10 km bre to delay them with respect to the pulses passing through memory B by more than the laser coherence length, thus randomizing the mutual phase between pulses from the two memories. Finally, pulses are detected by two single-photon detectors (actively quenched silicon avalanche photodiodes) placed at the outputs of the HOM-BS, and coincidence detection events are analysed with a time-to-digital convertor and a computer.
HOM measurements after single-photon-level storage. We rst deactivate both quantum memories (see Methods) to examine the interference between directly transmitted pulses, thereby establishing a reference visibility for our experimental set-up. We set the mean photon number per pulse before the memories to 0.6,
that is, to the single-photon level. Using the wave plates, we rotate the polarizations of the pulses at the two HOM-BS inputs to be parallel (indistinguishable) or orthogonal (distinguishable) and in both cases record the coincidence detection rates of the detectors at the HOM-BS outputs. Employing equation (1), we nd a visibility of (47.93.1)%.
Subsequently, we activate memory A while keeping memory B off and adjust the timing of the pulse preparation so as to interfere a recalled pulse from the active memory with a directly transmitted pulse from the inactive memory (see Methods). Pulses are stored for 30 ns in memory A prepared with the AFC shown in Fig. 3a, and the mean photon number per pulse at the quantum memory input is 0.6. Taking the limited storage efciency of E1.5% and coupling loss into account, this results in3.4 10 4 photons per pulse at the HOM-BS inputs. As before,
changing the pulse polarizations from mutually parallel to orthogonal, we nd V (47.75.4)%, which equals our reference
value within the measurement uncertainties.
As the nal step, we activate both memories to test the feasibility of two-photon interference in a quantum-repeater scenario. We note that in a real-world implementation, memories belonging to different network nodes are not necessarily identical in terms of material properties and environment. This is captured by our set-up where the two Ti:Tm:LiNbO3 waveguides feature
NATURE COMMUNICATIONS | 4:2386 | DOI: 10.1038/ncomms3386 | http://www.nature.com/naturecommunications
Web End =www.nature.com/naturecommunications 3
& 2013 Macmillan Publishers Limited. All rights reserved.
ARTICLE NATURE COMMUNICATIONS | DOI: 10.1038/ncomms3386
different optical depths and experience different magnetic elds (see Fig. 3b and Methods). To balance the ensuing difference in memory efciency, we set the mean photon number per pulse before the less efcient and more efcient memories to 4.6 and0.6, respectively, so that, as before, the mean photon numbers are3.4 10 4 at both HOM-BS inputs. With the storage time of
both memories set to 30 ns, we nd V (47.23.4)% in excellent
agreement with the values from the previous measurements. The consistently high visibilities, compiled in the rst column of Table 1, hence conrm that our storage devices do not introduce any degradation of photon indistinguishability during the reversible mapping process, and that two-photon interference is feasible with photons recalled from separate quantum memories, even if the memories are not identical.
HOM measurements after storage of few-photon pulses. We now investigate in greater detail the change in coincidence count rates as photons gradually change from being mutually indistinguishable to completely distinguishable with respect to each degree of freedom accessible for change in single-mode bres, that is, polarization, temporal and spectral modes (see Methods). To acquire data more efciently, we increase the mean number of photons per pulse at the memory input to between 10 and 50 (referred to as few-photon-level measurements). However, the mean photon number at the HOM-BS remains below one. Example data plots are shown in Fig. 4, whereas the complete set of plots is supplied in Supplementary Figs S1S3.
In Fig. 4a, we show the coincidence count rates as a function of the polarization of the recalled pulse for the case of one active memory. The visibilities for all congurations (that is, zero, one or two active memories) extracted from ts to the experimental data are listed in column 2 of Table 1. They areas in the case of single-photon-level inputsequal to within the experimental uncertainty.
Next, in Fig. 4b, we depict the coincidence count rates as a function of the temporal overlap (adjusted by the timing of the pulse generation) for the two-memory conguration. Column 3 of Table 1 shows the visibilities extracted from Gaussian ts to the data, reecting the temporal proles of the probe pulses, for all congurations. Within experimental uncertainty, they are equal to each other. Alternatively, in the single-memory conguration,
Table 1 | Experimental two-photon interference visibilities for different degrees of freedom.
Storage
Single-photon level
Few-photon level
Conguration Polarization Polarization Temporal Spectral No-storage (47.93.1)% (51.05.6)% (42.42.3)% (43.71.7)%
Single-storage (47.75.4)% (55.54.1)% (47.63.0)% (42.43.5)% Double-storage (47.23.4)% (53.15.3)% (46.13.2)% NA
NA, not applicable.
Polarization angle (deg)
a b
2,800
1,000
2,600
Coincidence counts per minute
Coincidence counts per minute
900
2,400
800
2,200
2,000
700
1,800
600
1,600
500
1,400
1,200
400
1,000 0 20 40 60 80 100 120
300 20 10 0 10 20
Pulse time separation (ns)
c d
200
1,500
1,400
Coincidence counts per minute
Coincidence counts per minute
175
1,300
150
1,200
125
1,100
100
1,000
900
75
800
50 20 30 40 50 60 70 80
150 100 50 0 50 100 150
Storage time (ns)
Pulse frequency separation (MHz)
Figure 4 | Examples of measured HOM interference. HOM interference plot examples for one or two active memory congurations. (a) Varying mutual polarization difference with one active memory and 30 ns storage time. (b) Varying temporal overlap by changing timing of pulse generation with two active memories and 50 ns storage time. (c) Varying temporal overlap by changing storage time of one active quantum memory from 25 to 75 ns. (d) Varying spectral overlap for one active quantum memory and 50 ns storage time. Owing to the limited frequency tuning range of our AOM, we determine a reference level by additionally making the pulse polarizations orthogonal. The resulting count rate is shown with the black line and error band in dark yellow. All error bars are calculatedassuming the Poissonian counting statisticsas the square-root of the total counts. Some additional scattering is because of intensity uctuations at the HOM-BS inputs, which cannot be normalized away using the counts from the individual detectors owingto the manifestation of the HOM interference in these counts (see Supplementary Note 5). The data in (a) are tted to a sinus function. The data in bd are tted to a Gaussian function. The acquisition time per data point is 60 s in a,b,d and 120 s in c.
4 NATURE COMMUNICATIONS | 4:2386 | DOI: 10.1038/ncomms3386 | http://www.nature.com/naturecommunications
Web End =www.nature.com/naturecommunications
& 2013 Macmillan Publishers Limited. All rights reserved.
NATURE COMMUNICATIONS | DOI: 10.1038/ncomms3386 ARTICLE
we also change the temporal mode overlap by adjusting the storage time of the pulse mapped to the quantum memory. Again the measured visibility of V (44.46.9)% (see Fig. 4c) is close
to the theoretical maximum.
Finally, we vary the frequency difference between the two pulses to witness two-photon interference with respect to spectral distinguishability. For this measurement, we consider only the congurations in which neither, or a single memory is active. In both cases, the visibilities, listed in the last column of Table 1, are around 43%. Although this is below the visibilities found previously, for reasons discussed in the Supplementary Note 2, the key observation is that the quantum memory does not affect the visibility. We have now demonstrated several experiments that consistently yield high two-photon interference visibilities; however, we wish to point out that the two-photon interference visibility can be substantially reduced by imperfect preparation or operation of our quantum memory. This is further discussed in the Supplementary Note 3.
Bell-state measurement. As stated in the introduction, Bell-state measurements (BSM) with photonic qubits recalled from separate quantum memories are key ingredients for future applications of quantum communication. To demonstrate this important element, we consider the asymmetric (and arguably least favourable) conguration in which only one of the qubits is stored and recalled. Appropriately driving the AOM in Fig. 2, we alternately prepare the states |CaS and |CbS, which describe time-bin qubits18 of the form cos yk2
p j e i j li, that is on the xy-plane of the Bloch
sphere (ya yb p/2). Using equation (2), we nd that the |c S
Bell-state projection count rate is smallestbut non-zerowhen fafb 0, that is, the qubit states are parallel, and
largest when the phases differ by p, that is, the qubit states are orthogonal. Inserting the respective values for Rk and R? into
equation (3) results in an expected error rate of eatt= 0:25. Using again 0.6 photons per qubit, we measure the coincidence counts for fafb 0 and p, giving us R8 and R?, respectively.
From these we get an experimental error rate of eexp= 0:287 0:020, which is slightly above the theoretical
bound. This indicates that either the measurement suffers from imperfections such as detector noise, or the modes at the HOMBS are not completely indistinguishable, which, in turn, could be due to imperfectly generated qubit states or imperfect storage of the qubit in the quantum memory. In the following, we will use the measured error rates to asses our quantum memory and thus make the most conservative assumption that the entire differences between the expected and measured values for the error rates are due to the memory delity being less than one.
Assessing our quantum memory using Bell-state measurements. As a rst step, we derive lower bounds for the error rates when the best-known classical storage strategy is applied, and then compare it to the outcomes of our Bell-state measurements. To accommodate this scenario, we suppose that the memory performs the following operation |cS/c|-F|cS/c| (1F)
|c>S/c>|, where F denotes the delity of the stored state and |c>S is the state orthogonal to the input state |cS. For storing a photon in an unknown qubit state, the delity is bounded from above by FCM 0.667 when using a classical memory30, whereas
for a quantum memory the upper bound is FQM 1. The former
bound strictly only applies to the storage of single-photon states, whereas, for coherent states, the bound is higher. Indeed, the best classical storage approach is optimized with respect to the mean number of photons per qubit and derives additional information about an input state by measuring individual photons from signals containing multiple photons in different bases. Further, if the quantum memory features limited efciency, then the best classical memory would selectively discard signals containing one (or few) photon(s) and measure only signals containing large
and j i
1
2
j eif
k
e i
sin yk2
li
j , where e and l,
respectively, label photons in early- or late-temporal modes, which are separated by 25 ns. The parameter yk determines the relative amplitude of and fk the relative phase between the two temporal modes composing the time-bin qubit for k a,b. The
qubits are directed to the memories of which only one is activated. The mean photon number of the qubit that is stored is set to 0.6, yielding a mean photon number of both qubits at the HOM-BS input of 6.7 10 4. We ensure to overlap pulses
encoding the states |CaS and |CbS at the HOM-BS and count coincidence detections that correspond to a projection onto the c i
j
p e i
1 j li
j li e i
j
j
Bell state. This projection occurs if
the two detectors click with 25 ns time difference18. The count rate R of the projection can be generalized for any given states of
two incoming time-bin qubits as (see Supplementary Note 4)
Rya; fa; yb; fb /
m2e 2m
8 4 sin2
sin2ya
ya
yb
2
; 2
where we assume equal mean photon numbers m at the two HOM-BS inputs.
As |c S is antisymmetric with respect to any basis, the count rate is expected to reach a minimum value Rk if the two input
pulses are prepared in equal states (/Ca|CbS 1), and a maxi
mum value R? if prepared in orthogonal states (/Ca|CbS 0).
Accordingly, we dene an error rate that quanties the deviation of the minimum count rate from its ideal value of zero:
e Rk
Rk R?
3
sin2yb 2 sinya sinyb 1 cosfa fb
We now consider two important cases for which we will compute the error rates both in theory and from our experiment.
For qubits with fa fb 0 (that is, encoded onto the xz-plane
of the Bloch sphere), we are interested in the rate Rk for the case
in which the input qubits are parallel (ya yb) and R? for the
case in which the input qubit states are orthogonal (ya yb p).
Specically, when we prepare two qubits (one at each input of the HOM-BS) in state |eS, or two qubits in state |lS, we expect
Rk 0 from the expression given in the equation (2). The count
rate for observing a projection onto |c S increases as we change ya (or yb), and reaches a maximum R? if one qubit is in state |eS
and the other one in |lS. Hence, using the expression for the error rate from equation (3), we nd eatte=l 0, where the superscript
(att) indicates that this result applies to attenuated laser pulses. We now turn to measuring the coincidence rates for all combinations of |eS and |lS input states, thus extracting
Rk and R?, using 0.6 photons per qubit at the memory input.
More precisely, we prepare the input qubit state j e ia j e ib
to measure Rk1 and then j e ia j lib to measure R?1.
Subsequently, we prepare the input qubit state j lia j lib
to measure Rk2 and then j lia j e ib to measure R?2. These
yield the average values Rk Rk1 Rk2=2 and R? R?1 R?2=2, from which we compute the experimental
error rate eexpe=l 0:039 0:037, which is near the theoretical value of eatte=l 0.
Next, we consider the case in which two input qubits are in equal superpositions of early and late bins, i
j
1
2
p j e i j li
NATURE COMMUNICATIONS | 4:2386 | DOI: 10.1038/ncomms3386 | http://www.nature.com/naturecommunications
Web End =www.nature.com/naturecommunications 5
& 2013 Macmillan Publishers Limited. All rights reserved.
ARTICLE NATURE COMMUNICATIONS | DOI: 10.1038/ncomms3386
numbers of photons. This would allow keeping the total recall efciency unaffected while maximizing the delity. The adjusted bound, ~FCM, has been derived in refs 4,31. Given our mean photon number per qubit of 0.6 together with 0.3% system efciency (1.5% memory and 20% waveguide coupling efciencies), we compute ~FCM 0:841.
The delity of the memory operation modies the Bell-state measurement count rates as Rk ! FRk 1 FR?, and like
wise for R?. This allows us to express the error rate expected
after imperfect storage of one of the qubits partaking in the Bell-state measurement:
e
FRk 1 FR? Rk R?
; 4
where the count rates Rk and R? are those expected without the
memory. After simple algebra using equation (2) and equation(4), we nd that eatte=l 1 F for the qubits encoded in the e/l basis, and, using ~FCM 0:841, yields a lower bound ofatt;CMe=l
0:159 with a classical memory. Hence, our experimentally observed value of eexpe=l 0:039 0:037 clearly violates the bound. In the / basis, we derive eatt= 3 2F=4, which,
in the case of an optimized classical memory, yields the lower boundatt;CM= 0:330. Our measured value of eexp= 0:287
0:020 is again below the classical limit.
We can also reverse the equations and estimate our memorys delity based on the measured error rates. In this case, inserting eexpe=l and eexp= into the appropriate expressions in the previous
paragraph, we deduce the values Fexpe=l 0:961 0:037 and Fexp= 0:926 0:041. The measured estimates of the memory delity Fexpe=l and Fexp= in the two bases are equal to within the experimental error and well above the upper bound ~FCM 0:841
for an optimized classical memory.
Although we do not use single-photon sources for the experiments reported here, it is interesting to determine how well our results measure up to those that could have been obtained if single-photon sources had been employed. For this, one can simply compute the count rate for the projection onto |c S for arbitrary two input qubits encoded into single photons (see Supplementary Note 4). We nd that for any two parallel input qubit states (ya yb and fa fb) we get Rk 0.
Therefore, irrespective of the projection count rate for orthogonal input qubit states, the expected error rate is always e(sing) 0,
where sing identies this value as belonging to the single-photon case. Gauging the effect of storing one of the single photons partaking in the Bell-state measurement in a memory is thus independent of the basis and, using equation (4), we derive e(sing) 1F and specically compute the bound
e(sing,CM) 0.333. We recognize that the two values eexpe=l
0:039 0:037 and eexp= 0:287 0:020 obtained experimen
tally are both well below e(sing,CM). This means that even with a single-photon source at ones disposal, the error rates that we measured could not have been attained with a classical memory.
DiscussionIn this study, we demonstrate two-photon interference of weak coherent laser pulses recalled from separate AFC-based waveguide quantum memories. Our measurement results show that the two-photon interference visibility stays near the theoretical maximum of 50% regardless of whether none, one or both pulses have been recalled from our quantum memories. In addition, we demonstrate for the rst time a Bell-state projection measurement with one of the two partaking qubits having been reversibly
mapped to a quantum memorya key element for advanced applications of quantum information processing. Our results show that solid-state AFC quantum memories are suitable for two-photon interference experiments, even in the general case of storing the two photons an unequal number of times. Further, we analyse quantum and classical bounds of the storage delity for Bell-state measurements with weak laser pulses and assess the quantum nature of our storage device by comparing our experimental results to the derived theoretical bounds. This approach follows the practice of employing attenuated laser pulses to characterize quantum memories4,28,31, however, extending it from assessing the preservation of quantum information encoded in a single degree of freedom to assessing the preservation of all degrees of freedom of the photonic wavefunction. As long as the dark count rate is low, our memories efciencies do not affect the measured error rates as these are based on post-selected coincidence detection events. Thus, our results pertain to the numerous applications, such as quantum repeaters, which incorporate post-selection.
Given these results, our quantum memories may soon be used as synchronization devices in multi-photon experiments. This will require an improvement of the system efciency32 and implementation of multi-mode storage supplemented by read-out on demand. The latter requirement can be achieved by storing photons occupying different temporal modes and adjusting the recall time of the photons33. Alternatively, it can be achieved by simultaneously storing photons in different spectral modes and selectively recalling photons in certain frequency modes (N.S., manuscript in preparation), which does not require adjustable storage time. This will allow increasing the number of photons that can be harnessed simultaneously for quantum information processing or fundamental tests beyond the current limit of eight34. A further goal is to develop workable quantum repeaters or, more generally, quantum networks, for which longer storage times are additionally needed. Depending on the required value, which may range from a 100 ms (ref. 35) to seconds26, this may be achieved by storing quantum information in optical coherence, or it may require mapping of optical coherence onto spin states25.
Methods
Preparation and properties of our quantum memories. The fabrication of the Ti:Tm:LiNbO3 waveguides and spectroscopic properties of Tm atoms in this material have been reported in ref. 29. The two waveguides are fabricated identically but differ in terms of overall length, yielding optical depths of 2.5 for memory A and 3.6 for memory B.
To prepare an AFC memory, we perform frequency-selective optical pumping on the inhomogeneously broadened transition of Tm at 795.43 nm wavelength. This process is determined by two factors, namely the spectrum of the pumping light, averaged over many pumping cycles, and the level structure of Ti:Tm:LiNbO3. As detailed in ref. 20, the optical pumping is achieved by chirping the laser frequency while periodically modulating its intensity. Resonant atoms are excited and subsequently decay to a long-lived shelving state, yielding a spectral hole at the excitation wavelength. Hence, repeating this process a sufciently long time using pump light with (time-averaged) periodic spectrum results in periodic persistent spectral holes that form the troughs of the AFC. The atoms that are not excited by the pump light remain in the ground state and form the peaks of the AFC. Once the AFC is prepared, an incident photon is mapped onto a collective excitation of thulium ions and subsequently re-emitted after a pre-set storage time given by t 1/D, where D is the comb tooth spacing25. As the
spectrum of the optical pumping light controls D, it allows one to set the storage (delay) time.
In our storage devices, Ti:Tm:LiNbO3 crystals, the ground and shelving states are formed by the two nuclear Zeeman-levels that become non-degenerate with the application of a magnetic eld along the C3 axis of the crystals. To optimally prepare an AFC, we adjust the magnetic eld such that the difference of the ground and excited-level splittings matches the frequency separation between the AFCs troughs and peaks. The AFC in memory A for the single-memory conguration is shown in Fig. 3a. It is noteworthy that as memory A is located at the centre of the set-ups solenoid while memory B is outside the solenoid (see Fig. 2), it is not possible to apply the same magnetic eld across the two crystals. Hence, we cannot, in the two-memory conguration, generate the optimal-level splittings for both
6 NATURE COMMUNICATIONS | 4:2386 | DOI: 10.1038/ncomms3386 | http://www.nature.com/naturecommunications
Web End =www.nature.com/naturecommunications
& 2013 Macmillan Publishers Limited. All rights reserved.
NATURE COMMUNICATIONS | DOI: 10.1038/ncomms3386 ARTICLE
memories simultaneously. Instead, we apply a magnetic eld that provides a reasonable balance in recall efciencies but is not optimal for either memory. This is reected by the different optical-depth proles and reduced contrasts of the AFCs shown in red in Fig. 3b.
Memory operation. A quantum memory is said to be activated when we congure the micro-electromechanical switches to allow the optical pumping light to reach the memory during the preparation stage, and thus tailor an AFC into the inhomogeneously broadened absorption spectrum of thulium (see Fig. 2). If the optical pumping is blocked, the memory is said to be deactivated and light entering the waveguide merely experiences constant attenuation over its entire spectrum. In all cases, we adjust the mean photon number at the memory inputs so that mean photon numbers are equal at the HOM-BS inputs. This is required for achieving maximum visibility with attenuated laser pulses (see Supplementary Note 1).
Changing degrees of freedom. The polarization degree is easily adjusted using the free-space half- and quarter-wave plates set at each HOM-BS input. For our measurements, we rotate the HWP in steps of either 45 or 7.5. The temporal separation dt between a pulse arriving at one of the HOM-BS inputs and the next pulse in the train arriving at the other input can be expressed as dt {nl/c}mod dtr,
where n is the refractive index of the bres, lE10 km is the path-length difference for pulses interacting with memory A and B, and dtr is the repetition period of the pulse train from the AOM, which is set in the range of 350400 ns. As we can change dtr with 10 ps precision, we can tune dt on the ns scale. For the storage time scan, the recall efciency decreases with storage time because of decoherence. Hence, we balance the mean photon number per pulse for stored and transmitted pulses for each storage time. Finally, to change the spectral overlap of the pulses input to the HOM-BS, we can utilize that these pulses were generated at different times in the AOM and thus we can choose their carrier frequencies independently. We interchangeably drive the AOM by frequencies na and nb and thus create two interlaced trains of pulses with different frequencies. By adjusting the pulse timing, we can ensure that the pulses overlapped at the HOM-BS belong to different trains and thus have a spectral overlap given by dn nanb. Owing to the limited
bandwidth of the AOM, we are only able to scan dn by 100 MHz, which, when compared with the 60 MHz pulse bandwidth, is not quite sufcient to make the pulses completely distinguishable. To achieve complete distinguishability, we supplement with a measurement using orthogonal polarizations at the inputs (see Supplementary Note 2).
Preparing states for Bell-state measurement. For the Bell-state projection measurement, we interchangeably prepare time-bin qubits in either |eS or |lS, or in 1
2
p j ei j l i and 1 2
p j ei j li by setting the relative phase
and intensity of the AOM drive signal. Adjusting the timing of the pulse preparation, we ensure that qubits in different states overlap at the HOM-BS.
References
1. Hong, C. K., Ou, Z.-Y. & Mandel, L. Measurement of subpicosecond time intervals between two photons by interference. Phys. Rev. Lett. 59, 20442046 (1987).
2. Kaltenbaek, R., Blauensteiner, B., Zukowski, M., Aspelmeyer, M. & Zeilinger, A. Experimental interference of independent photons. Phys. Rev. Lett. 96, 240502 (2006).
3. Beugnon, J. et al. Quantum interference between two single photons emitted by independently trapped atoms. Nature 440, 779782 (2006).
4. Specht, H. P. et al. A single-atom quantum memory. Nature 473, 190193 (2011).
5. Maunz, P. et al. Quantum interference of photon pairs from two remote trapped atomic ions. Nat. Phys. 3, 538541 (2007).
6. Sanaka, K., Pawlis, A., Ladd, T. D., Lischka, K. & Yamamoto, Y. Indistinguishable photons from independent semiconductor nanostructures. Phys. Rev. Lett. 103, 053601 (2009).
7. Patel, R. B. et al. Two-photon interference of the emission from electrically tunable remote quantum dots. Nat. Photon 4, 632635 (2010).8. Flagg, E. B. et al. Interference of single photons from two separate semiconductor quantum dots. Phys. Rev. Lett. 104, 137401 (2010).
9. Lettow, R. et al. Quantum interference of tunably indistinguishable photons from remote organic molecules. Phys. Rev. Lett. 104, 123605 (2010).
10. Bernien, H. et al. Two-photon quantum interference from separate nitrogen vacancy centers in diamond. Phys. Rev. Lett. 108, 043604 (2012).
11. Sipahigil, A. et al. Quantum interference of single photons from remote nitrogen-vacancy centers in diamond. Phys. Rev. Lett. 108, 143601 (2012).
12. Felinto, D. et al. Conditional control of the quantum states of remote atomic memories for quantum networking. Nat. Phys. 2, 844848 (2006).
13. Chanelire, T. et al. Quantum interference of electromagnetic elds from remote quantum memories. Phys. Rev. Lett. 98, 113602 (2007).
14. Yuan, Z.-S. et al. Synchronized independent narrow-band single photons and efcient generation of photonic entanglement. Phys. Rev. Lett. 98, 180503 (2007).
15. Chen, Y.-A. et al. Memory-built-in quantum teleportation with photonic and atomic qubits. Nat. Phys. 4, 103107 (2008).
16. Yuan, Z.-S. et al. Experimental demonstration of a bdcz quantum repeater node. Nature 454, 10981101 (2008).
17. Weinfurter, H. Experimental bell-state analysis. Europhys. Lett. 25, 559564 (1994).
18. Tittel, W. & Weihs, G. Photonic entanglement for fundamental tests and quantum communication. Quant. Inf. Comp. 1, 356 (2001).
19. Lvovsky, A. I., Sanders, B. C. & Tittel, W. Optical quantum memory. Nat. Photon. 3, 706714 (2009).
20. Saglamyurek, E. et al. Broadband waveguide quantum memory for entangled photons. Nature 469, 512515 (2011).
21. Clausen, C. et al. Quantum storage of photonic entanglement in a crystal. Nature 469, 508511 (2011).
22. Zhang, H. et al. Preparation and storage of frequency-uncorrelated entangled photons from cavity-enhanced spontaneous parametric downconversion. Nat. Photon. 5, 628632 (2011).
23. England, D. G. et al. High-delity polarization storage in a gigahertz bandwidth quantum memory. J. Phys. B 45, 124008 (2012).
24. Mandel, L. Photon interference and correlation effects produced by independent quantum sources. Phys. Rev. A 28, 929943 (1983).
25. Afzelius, M., Simon, C., de Riedmatten, H. & Gisin, N. Multimode quantum memory based on atomic frequency combs. Phys. Rev. A 79, 052329 (2009).
26. Sangouard, N., Simon, C., de Riedmatten, H. & Gisin, N. Quantum repeaters based on atomic ensembles and linear optics. Rev. Mod. Phys. 83, 3380 (2011).
27. Kok, P. et al. Linear optical quantum computing with photonic qubits. Rev. Mod. Phys. 79, 135174 (2007).
28. de Riedmatten, H., Afzelius, M., Staudt, M. U., Simon, C. & Gisin, N. A solid-state light-matter interface at the single-photon level. Nature 456, 773777 (2008).
29. Sinclair, N. et al. Spectroscopic investigations of a ti:tm:linbo3 waveguide for photon-echo quantum memory. J. Lumin. 130, 15861593 (2010).
30. Massar, S. & Popescu, S. Optimal extraction of information from nite quantum ensembles. Phys. Rev. Lett. 74, 12591263 (1995).
31. Gndoan, M., Ledingham, P. M., Almasi, A., Cristiani, M. & de Riedmatten,H. Quantum storage of a photonic polarization qubit in a solid. Phys. Rev. Lett. 108, 190504 (2012).32. Afzelius, M. & Simon, C. Impedance-matched cavity quantum memory. Phys. Rev. A 82, 022310 (2010).
33. Afzelius, M. et al. Demonstration of atomic frequency comb memory for light with spin-wave storage. Phys. Rev. Lett. 104, 040503 (2010).
34. Yao, X.-C. et al. Observation of eight-photon entanglement. Nat. Photon. 6, 225228 (2012).
35. Munro, W. J., Harrison, K. A., Stephens, A. M., Devitt, S. J. & Nemoto, K. From quantum multiplexing to high-performance quantum networking. Nat. Photon. 4, 792796 (2010).
Acknowledgements
We thank Vladimir Kiselov for technical support and NSERC and AITF for nancial support. J.A.S. thanks the Killam Trusts and D.O. thanks the Carlsberg Foundation for nancial support.
Author contributions
M.G., R.R. and W.S. fabricated the Ti:Tm:LiNbO3 waveguide and characterized it at room temperature. J.J., J.A.S., E.S., N.S., D.O. and W.T. all made signicant contributions to the development of the experiment, measurement and analysis of the data, and preparation of the manuscript.
Additional information
Supplementary Information accompanies this paper at http://www.nature.com/naturecommunications
Web End =http://www.nature.com/ http://www.nature.com/naturecommunications
Web End =naturecommunications
Competing nancial interests: The authors declare no competing nancial interests.
Reprints and permission information is available online at http://npg.nature.com/reprintsandpermissions/
Web End =http://npg.nature.com/ http://npg.nature.com/reprintsandpermissions/
Web End =reprintsandpermissions/
How to cite this article: Jin, J. et al. Two-photon interference of weak coherent laser pulses recalled from separate solid-state quantum memories. Nat. Commun. 4:2386 doi: 10.1038/ncomms3386 (2013).
NATURE COMMUNICATIONS | 4:2386 | DOI: 10.1038/ncomms3386 | http://www.nature.com/naturecommunications
Web End =www.nature.com/naturecommunications 7
& 2013 Macmillan Publishers Limited. All rights reserved.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Copyright Nature Publishing Group Aug 2013
Abstract
Quantum memories allowing reversible transfer of quantum states between light and matter are central to quantum repeaters, quantum networks and linear optics quantum computing. Significant progress regarding the faithful transfer of quantum information has been reported in recent years. However, none of these demonstrations confirm that the re-emitted photons remain suitable for two-photon interference measurements, such as C-NOT gates and Bell-state measurements, which constitute another key ingredient for all aforementioned applications. Here, using pairs of laser pulses at the single-photon level, we demonstrate two-photon interference and Bell-state measurements after either none, one or both pulses have been reversibly mapped to separate thulium-doped lithium niobate waveguides. As the interference is always near the theoretical maximum, we conclude that our solid-state quantum memories, in addition to faithfully mapping quantum information, also preserve the entire photonic wavefunction. Hence, our memories are generally suitable for future applications of quantum information processing that require two-photon interference.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer