It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Commercial Inconel 600 nickel-chromium alloy was implanted with nitrogen, titanium, chromium, copper with tin (as bronze components) and yttrium ions to doses ranging from 1.6e17 to 3.5e17 cm-2. The aim of this research was to investigate the properties of the modified alloy in the context of its application in foil bearings. The virgin and the treated samples were tribologically tested and examined by Scanning Electron Microscopy, Glow Discharge Mass Spectrometry and Energy Dispersive Spectroscopy. The technological studies were preceded by modelling of concentration values of the introduced elements. The results obtained with the use of ion implantation are discussed. There are two advantages which should be highlighted: good agreement in modelling and experimental results of depth profiles of implanted ions, wear resistance improvement of Inconel 600 surface by implantation of copper and tin ions. The tribological tests indicate that abrasion and corrosion are the predominant mechanisms of surface wear.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer