Content area
Abstract
Formation of dislocations in a geological layer at a strike-slip displacement in its basement is studied by three-dimensional (3D) numerical modeling. It is shown that the pattern of strain localization is determined by the initial stress state or thickness of the deformed layer as well as by the Poisson ratio and strength of the medium. Three types of fracture zones are observed. Shear bands of the first type are dominated by the propeller-like surfaces of Riedel R-shears, which merge into a single main fault with feathering structures. In the second type of dislocation zones, the primary role is played by the surfaces oriented at an angle of 40° to the shear axis in the horizontal projections. After reaching the free surface, these discontinuities are cut by a V-shaped fault. In this case, the pattern of dislocations most closely corresponds to the flower structures. The third type is a trough, which may accommodate the formation of yet another strain localization zone along its axial part--a vertical fault.