Influence of Homogenization and Micro/Nano Source of Starting Powders on Format Ion of the Single YAP Phase

Abstract

Manufacturing high purity polycrystalline YAlO[3] (YAP) ceramics could replace monocrystalline YAP thus recently it is an interesting task for low cost producers of scintillators. The paper presents influence of different source of initial oxide powders (micro/nano powders of Y[2]O[3] and Al[2]O[3]) and the method of their homogenization on the formation of a YAP phase. The solid state reaction method was used to prepare YAP powder or ceramic pellets. After preheating, all samples in the form of powders and pellets were heat-treated in the temperature range of 1050-1650 °C. DTA method was applied for examination of the phase crystallization in the tested system. X-ray diffraction method (XRD) was used for characterization of the phase composition. X-ray microanalysis (EDS) was used to control homogeneity in the small areas. Morphology of the resultant samples are presented on SEM pictures. The results show a significant influence of the starting powders on the homogeneity, purity and temperature of formation of the main phase.