It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Subject of Research. The paper presents experimental study results of the gain factor effect of an erbium doped fiber amplifier on the noise floor level of a fiber-optic interferometric acoustic sensor. Fiber-optic sensor is based on a Michelson interferometer. The optical amplifier is located behind the compensating interferometer which induces the auxiliary phase modulation to the interference signal. The homodyne demodulation algorithm is used to recover the sensor phase signal. Method. During the experiment there were no external acoustical impacts on the sensor. The power control of optical signals from the fiber amplifier was performed. Noise signals from the sensor were written into data files under the different values of the fiber amplifier gain factor. Spectral estimations of the noise floor level of the fiber-optic interferometric sensor were performed by the averaged modified periodogram method under the different values of the fiber amplifier gain factor. Obtained results were used to define the dependence of the noise floor level of the fiber-optic interferometric sensor on the fiber amplifier gain factor. Main Results. Mean noise floor levels were equal to 64 urad/Hz0.5 at 355 Hz, 68 urad/Hz0.5 at 450 Hz and 66 urad/Hz0.5 at 500 Hz. Experimental results showed insignificant increase of the noise floor level of the fiber-optic interferometric sensor with the growth of the optical amplifier gain factor from 14.6 dB to 25.8 dB. The gain factor increase was about several percent and did not exceed inaccuracies of performed measurements. Practical Relevance. The absence of significant changes in the noise floor level of the considered fiber-optic sensor with the changing of the fiber amplifier gain factor is caused by the intensity noise suppression of the used demodulation scheme. The considered fiber amplifier might be used for the amplification of optical signals from the fiber-optic multiplexed array of fiber-optic sensors without the significant deterioration of their noise performance on condition that the homodyne demodulation algorithm with the intensity noise suppression is used.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer





