Effect of Long-term Service on Microstructure and Mechanical Properties of NiCrMoV Steel Welded Joint

Abstract

The influences of prolonged service on microstructure evolution and mechanical properties of NiCrMoV steel welded joint in an ex-service welded steam turbine rotor were investigated. The welded rotor had been operated for 22 years since 1991. The specimens for the present study were taken from the location where the temperature was as high as 230°C. The optical microscope (OM) showed that even after long-term service, there were no obvious defects such as creep cavities, cracks found in the microstructure of the whole welded joint after such a long term service. The microstructure was uniform and no obvious grain coarsening was observed. However some black strip-shaped zones were found in base metal and heat affected zone (HAZ). The distribution of hardness across the welded joints showed no anomalies. The results of tensile strength and fracture toughness tests demonstrated that the welded joint still exhibited excellent. Mechanical performance after long-term service, indicating that the welding process of Shanghai Turbine Plant was reliable and stable. With the improvement of forging and welding qualities and improved heat treatment furnaces with more accurately controlled temperature, it is reasonable to assume that the current large low-pressure (LP) welded rotors are definitely safe to operate under similar service conditions for designed life.