Decomposition Analysis and Trend Prediction of CO2 Emissions in China’s Transportation Industry

Abstract

China’s transportation industry has become one of the major industries with rapid growth in CO₂ emissions, which has a significant impact in controlling the increase of CO₂ emissions. Therefore, it is extremely necessary to use a hybrid trend extrapolation model to project the future carbon dioxide emissions of China. On account of the Intergovernmental Panel on Climate Change (IPCC) inventory method of carbon accounting, this paper applied the Logarithmic Mean Divisia Index (LMDI) model to study the factors affected by CO₂ emissions. The affected factors are further subdivided into the scale of employees, per capita carrying capacity, transport intensity, average transportation distance, energy input and output structure, energy intensity and industrial structure. The results are as follows: (1) Per capita carrying capacity is the most important factor to promote the growth of CO₂ emissions, while industrial structure is the main reason to inhibit the growth of CO₂ emissions; (2) the expansion of the number of employees has played a positive role in the growth of CO₂ emissions and the organization and technology management of the transportation industry should be strengthened; (3) comprehensive transportation development strategy can make the transportation intensity effect effectively reduce CO₂ emissions; (4) the CO₂ emissions of the transportation industry will continue to increase during 2018–2025, with a cumulative value of about 336.11 million tons. The purpose of this study is to provide scientific guidance for the government’s emission reduction measures in the transportation industry. In addition, there are still some deficiencies in the study of its influencing factors in this paper and further improvements are necessary for the subsequent research expansion.

1. Introduction

At present, the intensification of the greenhouse effect and its derivative effects is an important issue of common concern to governments of all countries [1,2]. Studies show that the CO₂ emissions from fossil fuels are the most significant reason for the exacerbated greenhouse effect [3,4,5]. As a country with high production efficiency, China consumes a large amount of fossil energy and emits a lot of CO₂ emissions. For the sake of restraining the growth of CO₂ emissions from fossil energy, the Paris Agreement was convened at the end of 2015. In the Intended Nationally Determined Contributions (INDCs) submitted to the Paris Agreement, it was pointed out that China’s CO₂ emissions shall get to the crest value around 2030 and strive to reach the peak with the fastest speed and shortest time [6]. The Chinese government promised that by 2030, the CO₂ emission per unit of GDP shall be 60% to 65% less than in 2005 [7].

The industrial sector is the traditional subject of CO₂ emissions in China. However, since China’s economy entered the ‘new normal’ [8], the impact of the tertiary industry sector, especially the transportation industry, on China’s CO₂ emissions has become increasingly important. China’s transportation industry is characterized by high energy consumption [9]. Through calculation of the data in the Energy Statistical Yearbook [10], energy consumption increased at an average annual ascending rate of 8.17% from 2001 to 2017 and reached 357.10 million tons in 2017 [10]. With the rapid increase of the transportation scale, its effect on China’s CO₂ emissions is expected to continue to expand. Therefore, for the sake of cutting down CO₂ emissions effectively, it is significant to determine the factors that cause the increase of CO₂ emissions. Based on this, this article proposed policy recommendations for reducing CO₂ emissions of the transportation industry. Achieving the goal of energy conservation and emission reduction is significant to China [11].

Generally, decomposition analysis is extensively applied for studying the affected elements of CO₂ emission [12]. It quantitatively measures the contribution value of each factor in a given process by decomposing the comprehensive or relative index into several driving elements. There are mainly two decomposition methods: Structural Decomposition Analysis (SDA) and Index Decomposition Analysis (IDA) [13]. In contrast to SDA, IDA has the strong points of simple structure, low data demand and fewer restricted conditions [14]. LMDI is the best developed model in the IDA method [15], which is not subject to zero value or residual value, and directly calculates the logarithmic weighting factor [16]. Ang proposed eight LMDI models, summarizing their origins, decomposition formulas, strengths and weaknesses to help users choose which model to use to provide a selection guide [17].

Compared with other decomposition methods, the LMDI model is considered to be the most effective tool to study the decomposition analysis of influencing factors, and its results are more applicable and explanatory [18,19]. The LMDI method has experienced a period of rapid growth and has made a great dedication to the analysis of CO₂ emissions in the states, regions and provinces [20]. Meanwhile, it is also increasingly used to research the affected factors of CO₂ emissions in various industries [21,22,23]. With the ongoing improvement of academics, the LMDI method has become a mainstream application in the factor analysis of the transportation industry. The following are examples of many scholars applying LMDI to decompose CO₂ emissions from the transportation industry. Zhang et al. established a regional elastic decoupling model and LMDI model for the transportation industry to analyze the factors affecting CO₂ emissions [24]. Zhang and Yao established the LMDI to analyze the contribution of earnings, energy strength and transport structure factors to CO₂ emissions of China’s transportation industry [7]. Liang et al. made use of the LMDI to study the restraining effect of energy structure, energy efficiency and population scale on CO₂ emissions in the transportation industry [11]. A study by Timilsina and Shrestha studied the contribution of per capita GDP, population increase and energy intensity to the growth of CO₂ emissions in the transport sector [25]. Fan and Lei measured the impact of energy structure, energy intensity, unit traffic turnover rate and traffic intensity on CO₂ emissions of Beijing’s transportation industry [26]. This article mainly used the LMDI to decompose the elements that affected the CO₂ emissions of China’s transportation industry in order to find the driving factors for reducing CO₂ emissions.

Meanwhile, this study also predicted future CO₂ emissions. Some scholars have made many explorations in predicting CO₂ emissions. Feng’s study used system dynamics to predict the trend of CO₂ emissions in Beijing from 2005 to 2030 [27]. Decai et al. established a GM (1, 1) grey model and multinomial regression hybrid model to forecast CO₂ emissions based on Jiangsu’s gross national product and energy consumption statistics [28]. Because the curve of the sample data to be predicted in this study is between linear and exponential trends, the above methods are not suitable. The Meng scholar added a linear equation based on the gray prediction to the hybrid trend model, which could use a small number of specimens for fitting and predict the above two tendencies simultaneously. These tests’ results had proved that the hybrid trend extrapolation model had better adaptability and prediction results than the single trend extrapolation method [29,30]. It can be seen that this article is suitable for applying the hybrid trend extrapolation method to predict CO₂ emissions in the next few years.

Therefore, this article applied the LMDI and hybrid trend extrapolation model in the transportation industry to decompose the elements that affect CO₂ emissions in 2001–2017 and forecast CO₂ emissions in 2018–2025. The factors influencing CO₂ emission studied in this paper are: Energy input–output structure, energy intensity, industrial structure, average distance, transportation intensity, per capita carrying capacity and the size of employees of the industry. The decomposition results can also supply a benchmark for government policies on how to cut down carbon dioxide emissions. This article consists of the following parts: Section 2 contains methods and data processing. Section 3 gives the contribution value of factors, CO₂ emissions results and predicted values. Section 4 gives the analysis of these factors; Section 5 gives the conclusion and political opinions. Finally, Section 6 gives the limitation and prospect of the article.

2. Methodology and Data 2.1. Extended LMDI The transportation industry refers to the business activities that transport goods or passengers to their destinations by means of transportation so as to transfer their spatial positions. This article divided the elements affecting CO₂ emissions into seven: Energy input–output structure, energy intensity, industrial structure, average transportation distance, transportation intensity, per capita carrying capacity and the scale of employees in the industry. There are eight typical types of fuel consumed by China’s transportation industry: Coal, coke, crude oil, gasoline, kerosene, diesel, fuel oil and natural gas.

In this article, the Intergovernmental Panel on Climate Change’s (IPCC) checklist [31] method was applied to calculate CO₂ emissions. CO₂ emissions are derived from energy consumption multiplied by its corresponding emission coefficient. Specifically,SC_Ciand_Mi data are derived from the general principle of total calculation, the production energy consumption [32]. The key to the calculation is the CO₂ emission factor. IPCC default values for international standards are usually used as emission factors to compute CO₂ emissions. On the basis of the assumption of a carbon emission factor, the IPCC calculates that CO₂ emissions remain unchanged as shown in Equation (1):

C=∑i=18_Ki×SC_Ci×_Mi×_Ni

whereCis the overall CO₂ emissions of China’s transportation industry;_Kiis the i-th energy use of the transportation industry (suit: kgce/m³; kgce/kg);SC_Ciis the standard coal coefficient of the i-th fuel (suit: kgce/m³; kgce/kg);_Miis the average low calorific value of different fuels;_Niis the CO₂ emissions factor of various fuels;iis the i-th energy source.

For the sake of studying the potential impact elements on CO₂ emissions, according to the classic Kaya identity [33], the LMDI is applied to establish the decomposition model of impact elements on CO₂ emissions, as shown in Equation (2):

C=∑i=18_Cit=∑i=18_CitEt×_EtVt×_VtGt×_QtWt×1_QtGt×_WtPt×_Pt

where_Citis the consumption of CO₂ in the t-year of the i-th fuel;_Etis the energy use of the t-year;_Gtis the GDP of the t-year;_Vtrepresents the added value of the transportation industry in the t-year;_Qtis the turnover volume of the t-year (passenger traffic plus freight volume);_Wtis the t-year shipment (passenger traffic plus freight volume);_Pt is the employees of transportation industry in the t-year. Among them, the selection of GDP, P, energy use and turnover indicators came from [7,34], and the rest of the indicators were selected according to the relevant indicators in the China Statistical Yearbook [10]. Furthermore, Equation (2) is expressed as follows:

C=∑i=18_Cit=∑i=18K_Sit×E_It×I_St×_Lt×Q_It×_Yt×_Pt

whereK_Sit=_Cit/_Etrepresents the energy input and output structure of the i-th energy;E_It=_Et/_Vtmeans the energy intensity of the t-year;I_St=_Vt/_Gtmeans the industrial structure of the t-year;_Lt=_Qt/_Wtmeans the average transportation distance of the t-year;Q_It=1/_Qt/_Gtrepresents the reciprocal of transport intensity in the t-year;_Yt=_Wt/_Ptrepresents the per capita carrying capacity of the transportation industry in the t-year;_Ptis the scale of employees of the transportation industry in the t-year.

LMDI is able to partition into two classifications: Multiplication decomposition and addition decomposition. Some absolute indicators (such as total energy consumption, indirect CO₂ emissions of residents, etc.) are usually decomposed by addition. At present, due to the problem of the development of method model, the application of addition decomposition is more common than multiplication decomposition, and the following are examples of using addition decomposition analysis to solve the problem of CO₂ emission. Lin and Xie used the method of addition structure decomposition to sum up the changes of CO₂ emissions in China’s food industry from 1992 to 2010 into four aspects [35]. Wang and Yang’s indirect CO₂ emissions to urban and rural residents in Beijing from 2000 to 2010 were decomposed into eight influencing factors by adding an LMDI structure [36]. Therefore, this article used addition decomposition to study CO₂ emissions from the transportation industry. The sum of the contribution of the seven impacts is the total growth of CO₂ emissions from year t1 to year t. The Kaya identity is improved as follows:

ΔC=^CT−^CT−1=Δ_CKS+Δ_CEI+Δ_CIS+Δ_CL+Δ_CQI+Δ_CY+Δ_CP

whereΔCrepresents the increase in total CO₂ emissions from the t-1 year to the target year t; whereΔ_CKS,Δ_CEI,Δ_CIS,Δ_CL,Δ_CQI,Δ_CYandΔ_CP reflect the degree of the elements’ impact. The contribution of the seven variables to CO₂ emissions can be based on the LMDI method decomposition equation. The specific decomposition formula is as follows, in Table 1, whereKS≠0,EI≠0,IS≠0,L≠0,QI≠0,Y≠0,P≠0.

2.2. Hybrid Trend Extrapolation Model

Combining the GM (1, 1) prediction equation with the linear model, a mixed equation is established. When it is used for prediction, iteration is carried out on the premise of determining the starting point of iteration and a given time series^x(0)(k) . From this, the hybrid trend extrapolation equation is written by Meng et al. [29]:

^{x^0}k+1=_λ1 ^{x^0}k+_λ2k+_λ3^{x^0}1=^{x^0}1+λ4

where λ₁–λ₄ are the equation parameters of the mixed trend extrapolation equation.

Equation (5) is a combination of an unconstrained optimization equation and a linear equation that can effectively enhance the usability of the hybrid model in simulating the above two trends and any trends between them. By changing the parameters of the equation, the corresponding tracking fit/prediction result is obtained.

When determining the parameters of the equation, n observations can be utilized to first estimate the values of three parameters in two steps. Estimation of λ₁, λ₂ and λ₃ are calculated by Liu et al. [37]:

λ^=^{(B′B)−1B′}Y,where:λ^=_λ^1λ^2λ^3, B=^x(0)(1)11^x(0)(2)21⋯⋯⋯^x(0)(n−1)n−11 andY=^x(0)(2)^x(0)(3)⋯^x(0)(n).

The estimation of λ₄ is calculated based on the aforementioned results by minimizing the fitting errors. That is,

min_β^4∑k=1n^{x^(1)(k)−x(1)(k)2}

The results of the above unconstrained optimization equation is given by Zeng and Meng [38]:

_λ^4=∑k=1n−1^x(1)(k+1)−_λ^1k ^x(1)(1)−_λ^2∑j=1kj_λ^1k−1−1−_λ^1k1−_{λ^1λ^3λ^1k}1+∑k=1n−1_λ^12k

where x⁽¹⁾ is the cumulative generation time series of x⁽⁰⁾, which is achieved by

^x(1)(k)=∑i=1k^x(0)(i)bt=2n−1_Mt1−_Mt2

After obtaining the estimations of λ₁–λ₄, let k = 1, 2, 3, …, in Equation (9), the suiting and prediction results to x⁽⁰⁾(k) are then achieved. 2.3. Data Source

In this article, data are obtained from the use of coal, coke, crude oil, gasoline, kerosene, diesel, fuel oil and natural gas in “transportation, storage and postal industries” of the China Energy Statistics Yearbook [10]. Energy use data need to be changed into standard quantity according to the standard coal coefficient. Specifically,SC_Ci,_Mi and CO₂ emissions coefficient data are derived from the general principle of total calculation, production energy consumption of 2008 [32], as shown in Table 2 below.

In order to eliminate the impact of inflation, on the premise of knowing the GDP index and the transportation industry index in 2001–2017, the constant price GDP and the transportation industry added value in 2017 are, respectively, multiplied by the respective ratio between the index in 2001–2016 and the index in 2017 to obtain the constant price GDP and the transportation industry added value for 2001–2016. The calculation results are shown in Table 3.

Conversion turnover is a comprehensive indicator reflecting the total turnover of passenger and cargo transportation in the transportation sector. It is calculated by converting the passenger turnover into a ton-kilometer (ton of nautical miles) using the conversion factor, and then adding it to the cargo turnover. It is expressed as “converted ton-kilometer” (for shipping companies as “converted ton of nautical miles”). On the basis of the transfer coefficient of the mode of transportation, the conversion between passenger and cargo is completed. Of course, turnover should be converted into flow that can be compared or added according to specific conditions. In Houda and Mounir’s research, the turnover is measured by ton-km. Therefore, the passenger turnover calculated by people per kilometer must be converted into tons per kilometer by the conversion factor. Among them, 1 passenger-km for railway transportation is converted into 1 ton-km, and 13.8 passenger-km for air transportation is converted into 1 ton-km [39].

3. Results 3.1. CO₂ Emission Results

As shown in Figure 1 below, the current situation and trend of CO₂ emissions in the transportation industry can be analyzed clearly and intuitively to understand the progress of emission reduction. CO₂ emissions generated by eight energy sources consumed by the transportation industry gradually increased from 2001 to 2017, with an average ascending rate of 7.97%, from 314.35 million tons in 2001 to 1.07 billion tons in 2017. During 2001–2004, the CO₂ emissions were in a fast growth period. China’s opening to the outside world had been further strengthened, which required the support of the transportation industry, leading to the fast increase of CO₂ emissions. In 2005–2008, it was in a period of slow growth, and the growth rate gradually decreased due to the implementation of the Kyoto Protocol [40]. The Olympic Games in Beijing organized in 2008 had also played a greater role in driving transportation, post and telecommunications, communications and other industries. First, the scale of infrastructure expansion was shown by a large increase in public transport vehicles, a large increase in passenger and freight traffic by air and the expansion of expressways. Secondly, in terms of freight transportation, there was a lot of equipment transportation before and after the competition and people’s travel and transportation needs [41]. In 2009, the U.S. sub-prime crisis broke out, and China’s transportation industry was also greatly affected. Later, in response to the crisis, China introduced a national policy to expand domestic demand and strengthened the construction of an integrated transportation system, which had promoted the development of the transportation industry. In 2012, the State Department released the 12th Five-Year project [42], which set stricter emission reduction targets for the transportation industry. Until 2017, the ascending rate of CO₂ emissions fluctuated slightly.

3.2. Forecasting Results

In view of the above, this article substituted the relevant data into the hybrid trend extrapolation model to predict the CO₂ contribution of the seven influencing factors in 2018–2025. Table 4 shows that during this forecast period, the total contribution of influencing factors to CO₂ emissions will increase year by year. Among the influencing elements, except for the scale of employees and the per capita carrying capacity, the contribution of other factors to carbon dioxide emissions is negative growth.

The predicted CO₂ emissions of China’s transportation industry from 2018 to 2025 can be obtained by adding the predicted contribution of the influencing factors in Table 4 to the total CO₂ emissions of the previous year. The detailed forecast values can be seen in Table 5. It indicates that CO₂ emissions from the transportation industry may still be on an upward trend during 2018–2025.

3.3. Decomposition Results of the LMDI Model

According to Equations (1)–(4), the analysis is based on the data from 2001 to 2017. Based on the LMDI, we are able to determine the influence of these factors on the overall CO₂ emissions. The CO₂ emission decomposition results are shown in Table 6: uring 2001−2017, the combined impact of CO₂ emissions was about 757.67 million tons. Among them, transportation intensity, average transportation distance, transportation industry employees, energy intensity, industrial structure, per capita carrying capacity and energy input–output structure contributed to −100.83 million tons, 90.96 million tons, 236.58 million tons, −53.49 million tons, −123.15 million tons, 518.93 million tons and −67.36 million tons of CO₂ emissions. A negative value indicates a reduction in CO₂ emissions compared to the previous year.

4. Discussion 4.1. Transport Intensity Factor Analysis

Transport intensity is a common analysis index reflecting the relationship between traffic volume and economic aggregate. As can be seen from Table 6, the reciprocal curve of transport intensity effect from 2002 to 2017 increased CO₂ emissions by 100.83 million tons, taking up 14.34% of the overall contribution value of carbon dioxide emissions in the transportation industry. Figure 2 reveals that, except for the period 2002–2005, the reciprocal curve of transportation intensity is roughly the same as the tendency of CO₂ emissions. Overall, the cumulative transport intensity effectively reduced carbon dioxide emissions, which is identical with Wang et al. [43]. The improvement of transportation technology, organization and management of the transportation industry and the restriction of high energy consuming industries by the state [26] can achieve the purpose of reducing transportation intensity, so unit transportation volume can create more GDP value. The increase in the intensity of transportation in some years may be due to the increase in transportation activities and the implementation of the national demand expansion policy, which make the growth rate of traffic flow exceed GDP, thus increasing energy consumption and CO₂ emissions.

4.2. Average Transportation Distance Factor Analysis

The average transportation distance refers to the average transportation distance of goods or passengers transported by the transportation industry in a certain period of time. It is an index reflecting the working intensity of transportation. It can be seen from Table 6, the cumulative increase of CO₂ emissions from the average distance effect was 90.96 million tons in 2001–2017, taking up 12.93% of the overall contribution value of CO₂ emissions in the transportation industry. Figure 3 reveals that the trend of average transportation distance effect and CO₂ emissions of the transportation industry in 2002–2009 is almost the same; the change trend of average transportation distance effect and CO₂ emissions of the transportation industry in 2010–2017 is almost the opposite. The length of the average transportation distance is closely related to the industrial layout. From 2001 to 2007, China’s production layout was unreasonable, among which the second and third industries in the middle and the east accounted for the highest proportion, and the west of the first industry accounted for the highest proportion [44]. The transportation distance of raw materials and finished products between industries increased, thus increasing the turnover of goods and CO₂ emissions. Due to the launch of the medium and long-term railway network planning [45] in 2008, the number of short-distance passenger dedicated lines for intercity railway will be increased. The Ministry of Transport actively promotes the development of the integration of urban and rural highway passenger transport, adjusts the line structure, and increases the short-distance passenger transport of highways; in terms of freight transport, roadway transport accounts for the largest proportion of freight transport, mainly short-distance transport [46]. This resulted in a significant reduction in the average transportation distance in 2008 compared to 2007, resulting in a reduction in CO₂ emissions. The year 2009–2013 is still under planning [45], with little change in average transportation distance and stable change in CO₂ emissions. By observing the data in China’s Energy Statistical Yearbook [10], it can be seen that the demand for coal, metallurgy and other heavy industries is not strong in 2015–2017, resulting in the continuous decline of railway transportation. The positive development of E-commerce increased the road freight volume and shortened the average transportation distance.

4.3. Scale of Employees Factor Analysis

As can be seen from Table 6, the scale effect of industry employees in 2001–2017 increased CO₂ emissions by 236.58 million tons, taking up 33.64% of the overall contribution value of CO₂ emissions change of the transportation industry. Except for 2012, the CO₂ emissions of the whole line increased year by year. Figure 4 reveals that the tendency of personnel effect and CO₂ emissions of the transportation industry in 2002–2009 is almost the same; the tendency of personnel effect and CO₂ emissions of the transportation industry in 2010–2017 is almost the opposite. Li suggested that for every 2.5 people who moved to Beijing, the number of cars would increase by one. This brought great pressure to urban traffic and promoted the increase of traffic CO₂ emissions [47]. With the development of the economy, the increase of transportation volume needed to expand the scale of employees and the number of transportation vehicles to complete the transportation. This increased energy consumption and CO₂ emissions in the transportation industry. However, affected by the economic crisis in 2012, the domestic express delivery industry was facing a huge reshuffle. The transportation industry’s population was significantly lower than that of the previous year, so the contribution to CO₂ emissions was negative. Therefore, how to keep the scale of employees unchanged or even reduced while meeting the transportation activities is a problem to be considered.

4.4. Energy Intensity Factor Analysis

Energy intensity reflects the comprehensive utilization efficiency of fuel. As can be seen from Table 6, the energy intensity effect reduced CO₂ emissions by 53.49 million tons in 2001–2007, taking up −7.61% of the overall contribution value of CO₂ emissions. Figure 5 reveals that the energy intensity effect is almost in accord with the change tendency of CO₂ emissions in the transportation industry. It shows that a prominent progress in energy efficiency helps to decrease CO₂ emissions. In Lakshmanan’s study, it was also pointed out that the reduction of energy intensity of passenger cars and light trucks was the main factor in reducing CO₂ emissions of transportation in the United States [48].

The rapid development of China’s society and economy has promoted the development of the transportation industry. Energy intensity is related to factors such as the structure of energy use, energy efficiency and national policies. Similarly, Huang and Wang pointed out that energy intensity is closely related to energy structure, energy utilization technology and other factors [49]. At present, the cargo is still mainly transported by road, and the vehicles are mainly light and heavy trucks. According to the data in the China Statistical Yearbook [10], the volume of passenger transport by road has declined, but it still dominates, and air transport is gradually rising. Most of the transportation vehicles consume high energy-consumption fuels such as diesel and gasoline, which makes the energy intensity contribution increase. However, the contribution of energy intensity has been negative in some years, because the Ministry of Transport regards the construction of resource-saving and environmentally friendly transportation as a major strategy for transportation development in the new period [50], and promotes the overall upgrade of energy utilization technology and sustainable use of energy. With the promotion of emission decreased technology and the introduction of emission decreased policies, the energy intensity will decrease with the continuous increase of energy efficiency. As shown in the forecast data in Table 6, energy intensity is still the significant factor in restraining the growth of carbon dioxide emissions. In the future, efforts should be made to enhance energy intensity.

4.5. Industrial Structure Factor Analysis

On the basis of the results in Table 6, industrial structure effect has reduced CO₂ emissions by 123.15 million tons, taking up 17.51% of the overall contribution value of CO₂ emissions from the transportation industry in 2001–2017. Similarly, in the research of Tang et al., it was pointed out that the cumulative industrial structure effect is a negative contribution to the CO₂ emission of Jiangsu Province [28]. Figure 6 reveals that the trend of the industrial structure effect is almost the same as the change tendency of CO₂ emission of the transportation industry. Except for 2004 and 2017, the whole curve shows a state of CO₂ emissions reduction year by year. After the outbreak of the economic crisis, in order to restore the economy, we should implement the policy of expanding domestic demand, which requires the rapid development of the transportation industry in order to provide support for the growth of the national economy. The increasing scale of the heavy chemical industry requires a large number of raw material transportation activities, which makes the added value of the transportation industry increase in proportion to the national GDP, and the industrial structure effect increases CO₂ emissions. In addition, the impact of accession to the World Trade Organization (WTO) has further expanded, which provides support for the stable growth of China’s economy and makes the GDP grow rapidly, faster than the growth rate of the transportation industry. To a certain extent, the sustainable development strategy and price changes (including transport price and fuel price) also caused the growth rate of added value of the transport industry to be lower than the growth rate of GDP, thus reducing the proportion of the transport industry in GDP, and reducing CO₂ emissions due to the industrial structure effect.

4.6. Per Capita Carrying Capacity Factor Analysis

According to the results in Table 6, the per capita carrying capacity effect increased the total CO₂ emissions by 518.93 million tons from 2001 to 2017, taking up 73.79% of the overall contribution value of CO₂ emissions in the transportation industry. Economic development directly drives the increase of traffic volume. As shown in Figure 7 below, the per capita carrying capacity effect is roughly consistent with the change trend of CO₂ emission of the transportation industry. Along with the popularization of network technique and the continuous progress of e-commerce business, the number of employees has been growing steadily. The growth of traffic volume is faster than that of employees, resulting in the growth of per capita traffic pressure and vehicle energy consumption. However, as the statistical caliber of road traffic volume changed in 2013 [10], the transport volume dropped sharply, making CO₂ emissions lower than the previous year. From 2014 to 2017, the traffic volumes were in a stable growth stage, and there was only a little change in the employees. Therefore, the per capita traffic volume continues to increase, and the CO₂ emissions continue to increase.

4.7. Energy Input and Output Factor Analysis

In sight of the results in Table 6, the structural effect of energy input–output reduced CO₂ emissions by 67.37 million tons, making up 9.58% of the overall contribution value of CO₂ emissions from the transportation industry in 2001–2017. The structural effect of energy input and output has little impact on CO₂ emissions. It can reveal that the structural effect of energy input and output is basically unanimous with the change tendency of CO₂ emissions of the transportation industry from Figure 8, mainly because of the adjustment of energy use structure. With the rapid growth of freight turnover light and heavy truck transportation activities increases, and the energy consumption is mainly diesel. Diesel consumption is related to vehicle control technology, road slope and load factor [51]. In the GB1589 new national standard, the upper limit of truck weight is large, so the increase of diesel input–output structure leads to the increase of CO₂ emissions. Affected by the oil crisis, the price of fuel oil rose sharply afterwards, resulting in a significant decrease in fuel oil, but the total energy consumption increased, which caused the decrease in the input and output structure of fuel oil and reduced CO₂ emissions. In addition, residents are more inclined to take high-speed rail for long-distance travel [52], thereby reducing CO₂ emissions from the transportation industry.

5. Conclusions and Policy Implications

From 2001 to 2017, LMDI factor decomposition of China’s transport sector was carried out, and additive factorization analysis was given. The results of the study are as follows: The per capita carrying capacity is the core element to augment CO₂ emissions and the scale of employees is the significant element. Average transportation distance is the indirect element to augment CO₂ emissions; on the contrary, transportation intensity, energy intensity and industry structure are main elements in inhibiting the increase of CO₂ emissions, while the energy input–output structure has a limited influence on curbing CO₂ emissions. Among them, because the transportation volume is constantly increasing, the per capita carrying capacity will not decrease. As predicted in Table 4, future per capita carrying capacity will still be the main factor for increasing CO₂ emissions, so the government needs to focus on optimizing the remaining factors to reduce CO₂ emissions.

According to the above analysis, we aim to supply recommendations for the administration to formulate emission control policies to decrease CO₂ emissions in the transportation industry.

The government continues to increase energy efficiency to reduce more CO₂ emissions. In particular, the volume of road transport has increased for many years [10], and transportation vehicles are fueled by diesel and gasoline (carbon emission coefficient and standard coal coefficient are high). As a result, the price between gasoline and diesel has been reduced through government tax reforms [32] to reduce the number of diesel-fueled vehicles. A vehicle using a full hybrid drive system can more than double the fuel economy and reduce greenhouse gas emissions by more than half [53]. The government should also increase publicity for public transportation or purchase of clean fuel vehicles, and provide tax incentives for residents who purchase environmentally friendly vehicles. The Korean government is providing tax incentives and subsidies for environmentally friendly vehicles [21]. However, coal is still the main energy consumption in most industries in China. It shows that China’s clean energy initiative has not been fully promoted, so we should also actively adjust and optimize the energy consumption structure [54].

The government should reduce the proportion of the primary industry and expand the proportion of the tertiary industry, especially the modern service industry and clean technology industry in the tertiary industry to drive the rapid growth of GDP. The Belt and Road Initiative (BRI) countries will use the high-tech industry as the driving force and develop towards the optimization and upgrading of the industrial structure of the modern service industry and modern manufacturing industry [55].

The government should also increase financial support for technology. Under the “Internet” situation, the government uses big data analysis and intelligent transportation technology to improve the level of traffic policy decision-making and build an energy-saving comprehensive transportation system. According to the prediction results of this article, the transportation industry’s employees and per capita capacity will continue to increase CO₂ emissions, and energy intensity and transportation intensity will become the main factors to reduce CO₂ emissions. The CO₂ emissions of China’s transportation industry will be about 1.41 billion tons by 2025. It can be seen that China is actively fulfilling its international responsibilities to attain the goal of saving fuel and reducing emissions. Since this article does not consider Chinese features and it is general, the methods are able to study the CO₂ emissions of transport sectors in other states. This article takes China’s transportation industry as the target of study to supply instructions and consultation for analyzing CO₂ emissions in other states. 6. Limitations and Prospects of Research The research is mainly based on the LMDI decomposition model to analyze the influencing factors of transportation CO₂ emissions. The model is almost modeled using traditional econometric theory. It may lack consideration of spatial factors, so there will be some errors in measuring its influencing factors. In recent years, although the application of space metrology in the research of transportation CO₂ emissions has been gradually explored by domestic scholars, there are relatively few related studies. Therefore, in the subsequent research and development, further improvements are needed: (1) This paper uses the fossil energy consumption data of China’s transportation, storage and post industry in the research area to calculate the industry’s CO₂ emissions. The calculated results only consider the direct consumption of fossil energy in the transportation industry; (2) the indirect CO₂ emission caused by the consumption of electricity and heat is relatively small, and the data of the thermal CO₂ emission coefficient and grid carbon emission factor are relatively lacking. Therefore, the indirect energy consumption of electricity and heat is not taken into account in the calculation of traffic CO₂ emissions; (3) there is still a lot of room for development research in the application of space factors in CO₂ emissions, and the unremitting efforts of more researchers are needed.

Figure 1. CO2 emissions and growth rate of China's transportation industry.

Figure 2. CO2 emissions contribution effects of QI factor from 2002 to 2017.

Figure 3. CO2 emissions contribution effects of the L factor from 2002-2017.

Figure 4. CO2 emissions contribution of the P factor from 2002 to 2017.

Figure 5. CO2 emissions contribution effects of the EI factor from 2002 to 2017.

Figure 6. CO2 emissions contribution effects of the IS factor from 2002 to 2017.

Figure 7. CO2 emissions contribution effects of the Y factor from 2002 to 2017.

Figure 8. CO2 emissions contribution effects of the KS factor from 2002 to 2017.

Change Scheme	LMDI Equation
ΔC=Ct−Ct−1=ΔCKS+ΔCEI+ΔCIS+ΔCL+ΔCQI+ΔCY+ΔCP	ΔCKS=∑i=18Cit−Cit−1lnCit−lnCit−1×lnKStKSt−1ΔCIS=∑i=18Cit−Cit−1lnCit−lnCit−1×lnIStISt−1ΔCL=∑i=18Cit−Cit−1lnCit−lnCit−1×lnLtLt−1ΔCKI=∑i=18Cit−Cit−1lnCit−lnCit−1×lnKItKIt−1ΔCY=∑i=18Cit−Cit−1lnCit−lnCit−1×lnYtYt−1ΔCQI=∑i=18Cit−Cit−1lnCit−lnCit−1×lnQItQIt−1ΔCP=∑i=18Cit−Cit−1lnCit−lnCit−1×lnPtPt−1

Fuels	Factors (kgCO2/TJ)	Average Low Calorific Value (KJ/kg)	Standard Coal Coefficient (kgce/m3; kgce/kg)
Coal	94,600	20,908	0.7143
Coke	107,000	28,435	0.9714
Crude oil	73,300	41,816	1.4286
Gasoline	70,000	43,070	1.4714
Kerosene	71,900	43,070	1.4714
Diesel oil	74,100	42,652	1.4571
Fuel oil	77,400	41,816	1.4286
Natural gas	56,100	35,544	1.2143

Year	GDP (106 Yuan)	Industry Added Value (106 Yuan)	GDP Index	Transportation Industry Index
2001	197,334.21	10,662.93	851.90	823.60
2002	215,352.10	11,422.69	912.60	898.80
2003	236,963.98	12,122.37	968.50	989.00
2004	260,923.94	13,878.46	1108.80	1089.00
2005	290,658.25	15,433.03	1233.00	1213.10
2006	327,628.46	16,971.32	1355.90	1367.40
2007	374,254.54	18,975.24	1516.00	1562.00
2008	410,386.16	20,364.59	1627.00	1712.80
2009	448,961.69	21,051.75	1681.90	1873.80
2010	496,713.88	23,044.40	1841.10	2073.10
2011	544,082.72	25,271.11	2019.00	2270.80
2012	586,827.28	26,809.41	2141.90	2449.20
2013	632,351.20	28,578.01	2283.20	2639.20
2014	678,498.08	30,434.23	2431.50	2831.80
2015	725,315.84	31,668.37	2530.10	3027.20
2016	774,050.39	33,722.35	2694.20	3230.60
2017	827,121.70	36,802.70	2940.30	3452.10

Note: The GDP index and transportation industry index in 2001–2017 as well as the GDP and transportation industry added value in 2017 are derived from the China Statistical Yearbook [10].

Year	ΔQI	ΔL	ΔP	ΔEI	ΔIS	ΔY	ΔKS	Total
2018	3786.25	−1369.13	1958.62	−2255.84	−455.99	3003.01	−266.67	4400.26
2019	4174.60	−1614.12	1997.63	−2490.97	−418.12	2982.95	−288.43	4343.54
2020	4562.96	−1859.11	2036.46	−2726.09	−380.26	2962.89	−310.19	4286.65
2021	4951.31	−2104.10	2075.39	−2961.22	−342.39	2942.82	−331.95	4229.85
2022	5339.66	−2349.09	2114.26	−3196.35	−304.53	2922.76	−353.72	4173.00
2023	5728.01	−2594.08	2153.16	−3431.47	−266.66	2902.70	−375.48	4116.17
2024	6116.36	−2839.07	2192.05	−3666.60	−228.80	2882.64	−397.24	4059.34
2025	6504.71	−3084.06	2230.94	−3901.73	−190.93	2862.58	−419.00	4002.51
Total	41,163.86	−17,812.77	16,758.51	−24,630.27	−2587.70	23,462.35	−2742.68	33,611.31

Note: QI—reciprocal of transportation intensity; L—average transportation distance; P—size of employees; EI—energy intensity; IS—industrial structure; Y—per capita carrying capacity; KS—energy input–output structure.

Year	Predicted Value
2018	111,602.2983
2019	115,945.8432
2020	120,232.4907
2021	124,462.3395
2022	128,635.3375
2023	132,751.5123
2024	136,810.8492
2025	140,813.3560

Year	ΔQI	ΔL	ΔP	ΔEI	ΔIS	ΔY	ΔKS	Total
2002	925.87	213.58	−939.17	260.79	−610.52	2651.21	47.16	2548.92
2003	1613.29	415.04	4568.99	2708.67	−1282.67	−3116.14	−738.78	4168.39
2004	−6430.78	6647.07	−224.08	2255.95	1664.58	4121.92	−2936.68	5097.99
2005	−1462.36	2802.73	−527.96	−574.78	−83.56	4513.30	−755.41	3911.97
2006	1036.10	592.89	578.91	−220.23	−1342.64	4271.06	−194.36	4721.73
2007	221.56	1270.35	699.23	−2624.72	−1261.33	5634.70	−722.64	3217.14
2008	565.95	−3299.02	10.02	−308.81	−1347.50	8489.67	−872.06	3238.26
2009	−415.01	940.13	6513.45	−1394.90	−3668.96	−1216.71	−521.03	236.96
2010	−3119.33	1034.22	−156.93	721.85	−734.45	9174.77	−280.21	6639.92
2011	−1780.04	−797.99	5253.14	−678.55	96.85	4148.00	−793.56	5447.86
2012	−643.05	−1175.68	−12,697.03	2992.10	−1350.38	20,699.01	−211.92	7613.05
2013	9362.11	174.23	20,992.37	−97.92	−973.81	−23,909.88	2787.00	8334.11
2014	−562.80	5510.02	1655.23	−1986.22	−680.79	−69.75	−748.21	3117.49
2015	7760.77	−1716.96	−797.01	1255.75	−2633.21	1232.31	−253.75	4847.90
2016	1976.59	−365.28	−577.77	−3784.06	−208.07	5529.40	−335.96	2234.85
2017	1034.48	−3149.34	−693.72	−3873.47	2101.43	9739.94	−206.51	4952.81
Total	10,083.34	9096.00	23,657.69	−5348.54	−12,315.00	51,892.81	−6736.93	70,329.34

Note: QI—reciprocal of transportation intensity; L—average transportation distance; P—size of employees; EI—energy intensity; IS—industrial structure; Y—per capita carrying capacity; KS—energy input–output structure.

Author Contributions

Methodology, M.M. and M.L.; Supervision, M.M.; Writing-original draft, M.L. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Acknowledgments

We appreciate sincerely the electronic library and kinds of database purchased by North China Electric Power University for reliable empirical data.

Conflicts of Interest

The authors declare no conflict of interest.

References

1. Jiang, X.T.; Wang, Q.; Li, R.R. Investigating factors affecting carbon emission in China and the USA: A perspective of stratified heterogeneity. J. Clean. Prod. 2018, 199, 85-92.

2. Zhu, B.Z.; Su, B.; Li, Y.Z. Input-output and structural decomposition analysis of India's carbon emissions and intensity, 2007/08-2013/14. Appl. Energy 2018, 230, 1545-1556.

3. Cui, E.; Ren, L.; Sun, H. Analysis of energy-related CO2 emissions and driving factors in five major energy consumption sectors in China. Environ. Sci. Pollut. Res. 2016, 23, 19667-19674.

4. Lin, B.; Xie, C. Reduction potential of CO2 emissions in China's transport industry. Renew. Sustain. Energy Rev. 2014, 33, 689-700.

5. Ozturk, I. Measuring the impact of energy consumption and air quality indicators on climate change: Evidence from the panel of UNFCC classified countries. Environ. Sci. Pollut. Res. 2015, 22, 15459-15468.

6. UNFCCC. Adoption of the Paris Agreement (1/CP.21); United Nations Framework Convention on Climate Change: Paris, UK, 2015.

7. Zhang, K.; Liu, X.; Yao, J. Identifying the driving forces of CO2 emissions of China's transport sector from temporal and spatial decomposition perspectives. Environ. Sci. Pollut. Res. 2019, 26, 17383-17406.

8. Green, F.; Stern, N. China's changing economy: Implications for its carbon dioxide emissions. Clim. Policy 2017, 17, 423-442.

9. Bi, J.; Zhang, R.; Wang, H.; Liu, M.; Wu, Y. The benchmarks of carbon emissions and policy implications for China's cities: Case of Nanjing. Energy Policy 2011, 39, 4785-4794.

10. National Bureau of Statistics of China. China Statistical Yearbook 2002-2020; China Statistics Press: Beijing, China, 2002-2020.

11. Liang, Y.; Niu, D.; Wang, H.; Li, Y. Factors affecting transportation sector CO2 emissions growth in China: An LMDI decomposition analysis. Sustainability 2017, 9, 1730.

12. Zha, J.; Tan, T.; Yuan, W.; Yang, X.; Zhu, Y. Decomposition analysis of tourism CO2 emissions for sustainable development: A case study of China. Sustain. Dev. 2019.

13. Sun, W.; Xu, Y. Using a back propagation neural network based on improved particle swarm optimization to study the influential factors of carbon dioxide emissions in Hebei Province, China. J. Clean. Prod. 2016, 112, 1282-1291.

14. Hoekstra, R.; Van den Bergh, J.C. Comparing structural decomposition analysis and index. Energy Econ. 2003, 25, 39-64.

15. Shao, S.; Yang, L.; Gan, C.; Cao, J.; Geng, Y.; Guan, D. Using an extended LMDI model to explore techno-economic drivers of energy-related industrial CO2 emission changes: A case study for Shanghai (China). Renew. Sustain. Energy Rev. 2016, 55, 516-536.

16. Ang, B.W. The LMDI approach to decomposition analysis: A practical guide. Energy Policy 2005, 33, 867-871.

17. Ang, B.W. Decomposition analysis for policymaking in energy: Which is the preferred method? Energy Policy 2004, 32, 1131-1139.

18. Ang, B.W.; Huang, H.C.; Mu, A.R. Properties and linkages of some index decomposition analysis methods. Energy Policy 2009, 37, 4624-4632.

19. Ang, B.W.; Liu, F.L.; Chew, E.P. Perfect decomposition techniques in energy and environmental analysis. Energy Policy 2003, 31, 1561-1566.

20. Zhu, X.; Li, R. An analysis of decoupling and influencing factors of carbon emissions from the transportation sector in the Beijing-Tianjin-Hebei Area, China. Sustainability 2017, 9, 722.

21. Kim, S. Decomposition Analysis of Greenhouse Gas Emissions in Korea's Transportation Sector. Sustainability 2019, 11, 1986.

22. Shi, Q.; Chen, J.; Shen, L. Driving factors of the changes in the carbon emissions in the Chinese construction industry. J. Clean. Prod. 2017, 166, 615-627.

23. Gu, S.; Fu, B.; Thriveni, T.; Fujita, T.; Ahn, J.W. Coupled LMDI and system dynamics model for estimating urban CO2 emission mitigation potential in Shanghai, China. J. Clean. Prod. 2019, 240, 118034.

24. Zhang, S.Q.; Zheng, W.L.; Wang, J.W. Carbon Emissions and Economic Development in Transport Industry-An Empirical Research Based on Decoupling Theory and Structure Decomposition Model. Adv. Soc. Sci. Educ. Humanit. Res. 2006, 49, 596-599.

25. Timilsina, G.R.; Shrestha, A. Transport sector CO2 emissions growth in Asia: Underlying factors and policy options. Energy Policy 2009, 37, 4523-4539.

26. Fan, F.; Lei, Y. Decomposition analysis of energy-related carbon emissions from the transportation sector in Beijing. Transp. Res. Part D Transp. Environ. 2016, 42, 135-145.

27. Feng, Y.Y.; Chen, S.Q.; Zhang, L.X. System dynamics modeling for urban energy consumption and CO2 emissions: A case study of Beijing, China. Ecol. Model. 2013, 252, 44-52.

28. Tang, D.; Ma, T.; Li, Z.; Tang, J.; Bethel, B. Trend Prediction and Decomposed Driving Factors of Carbon Emissions in Jiangsu Province during 2015-2020. Sustainability 2016, 8, 1018.

29. Meng, M.; Niu, D.; Shang, W. A small-sample hybrid model for forecasting energy-related CO2 emissions. Energy 2014, 64, 673-677.

30. Meng, M.; Shang, W.; Zhao, X.; Niu, D.; Li, W. Decomposition and forecasting analysis of China's energy efficiency: An application of three-dimensional decomposition and small-sample hybrid models. Energy 2015, 89, 283-293.

31. IPCC. 2006 IPCC Guidelines for National Greenhouse Gas Inventories; IGES: Kanagawa Prefecture, Japan, 2006.

32. National Development and Reform Commission of China. General Principles for Calculation of Total Production Energy Consumption; National Development and Reform Commission of China: Beijing, China, 2008.

33. Kaya, Y. Impact of Carbon Dioxide Emission on GNP Growth: Interpretation of Proposed Scenarios; IPCC Response Strategies Working Group Reports; IPCC: Geneva, Switzerland, 1989.

34. Greening, L.A.; Ting, M.; Davis, W.B. Decomposition of aggregate carbon intensity for freight: Trends from 10 OECD countries for the period 1971-1993. Energy Econ. 1999, 21, 331-361.

35. Lin, B.; Xie, X. CO2 emissions of China's food industry: An input-output approach. J. Clean. Prod. 2016, 112, 1410-1421.

36. Wang, Z.; Yang, Y. Features and influencing factors of carbon emissions indicators in the perspective of residential consumption: Evidence from Beijing, China. Ecol. Indic. 2016, 61, 634-645.

37. Liu, S.; Dang, Y.; Fang, Z.; Xie, N. Grey System Theory and Its Application; Beijing Science Press: Beijing, China, 2010.

38. Zeng, B.; Meng, W. Special Time Series Oriented Grey Forecasting Modeling Method; Chongqing University Press: Chongqing, China, 2011.

39. Achour, H.; Belloumi, M. Decomposing the influencing factors of energy consumption in Tunisian transportation sector using the LMDI method. Transp. Policy 2016, 52, 64-71.

40. Breidenich, C.; Magraw, D.; Rowley, A.; Rubin, J.W. The Kyoto protocol to the United Nations framework convention on climate change. Am. J. Int. Law 1998, 92, 315-331.

41. Li, M.H.; Liu, Q.; Jin, J. Analysis of the Impact of Beijing Olympic Games on the Listed Companies in Transportation Industry. Transp. Enterp. Manag. 2008, 7, 17-18.

42. Ma, Y.Y.; Wang, W.G. Character of carbon emission of logistics industry in China and its affecting factors decomposition analysis: Based on LMDI technique. Math. Pract. Theory 2013, 43, 31-42.

43. Wang, W.W.; Zhang, M.; Zhou, M. Using LMDI method to analyze transport sector CO2 emissions in China. Energy 2011, 36, 5909-5915.

44. Song, H.F. An Empirical Study on the Impact of Industrial Spatial Distribution on Carbon Emissions. Master's Thesis, Jinan University, Guangdong, China, 2017.

45. China Daliy. Medium and long term railway network planning (adjusted in 2008). Compr. Transp. 2008, 12, 7-9.

46. Qin, F.F. Research on the Structural Characteristics of Highway Freight Transportation in China. World Commun. 2018, 32, 5-7.

47. Li, X.J. Solve traffic congestion in Beijing with zero population growth. Transp. Bus 2010, 11, 42.

48. Lakshmanan, T.R. Factors underlying transportation CO2 emissions in the USA: A decomposition analysis. Transp. Res. Part D Transp. Environ. 1997, 2, 1-15.

49. Wang, X.L.; Huang, Y.S. Decomposition of Factors Influencing Carbon Emission Intensity of Energy Consumption in Hebei Province. Math. Pract. Theory 2018, 48, 49-58.

50. Ministry of Transport of the People's Republic of China. The 12th Five Year Plan for Energy Conservation and Emission Reduction of Highway and Waterway Transportation; China Economic Publishing House: Beijing, China, 2011.

51. Osorio-Tejada, J.L.; Llera-Sastresa, E.; Hariza Hashim, A. Well-to-wheels approach for the environmental impact assessment of road freight services. Sustainability 2018, 10, 4487.

52. Zhou, J. Effects of the Development of High-speed Rail on the Changes of Comprehensive Passenger Transport Structure. Integr. Transp. 2019, 41, 7-11.

53. Kobayashi, S.; Plotkin, S.; Ribeiro, S.K. Energy efficiency technologies for road vehicles. Energy Effic. 2009, 2, 125-137.

54. Dong, F.; Gao, X.; Li, J.; Zhang, Y.; Liu, Y. Drivers of China's Industrial Carbon Emissions: Evidence from Joint PDA and LMDI Approaches. Int. J. Environ. Res. Public Health 2018, 15, 2712.

55. Zhu, C.; Gao, D. A Research on the Factors Influencing Carbon Emission of Transportation Industry in "the Belt and Road Initiative" Countries Based on Panel Data. Energies 2019, 12, 2405.