Vacuum laser powder bed fusion—track consolidation, powder denudation, and future potential

Abstract

Defects in parts processed by laser powder bed fusion (LPBF) are often triggered by laser/plasma plume interference and spattering. The implementation of a LPBF process in vacuum has been suggested to possibly reduce these effects. Within this study, the effects of process pressure variations between 1 mbar and atmospheric pressure on the generation of single tracks and on the surrounding layer of loose powder particles were studied for CP titanium grade 2 and the Maraging steel 1.2709. Below 10 mbar no single tracks could be generated and the powder layer adjacent to the track was effectively denuded. It was found that the essential mechanism for incorporating powder into the melt pool begins to work at process pressures above 10 mbar and its effectiveness increases with increasing pressure. The amount of powder incorporated into the melt pool depends on the material and the scanning conditions. With identical scanning conditions, this amount of powder is significantly larger for titanium than for steel. For process pressures above 200 mbar, no significant change in the amount of spattering could be found. In this pressure range improved process stability could be possible due to a reduced laser/plasma interaction and an increased laser penetration depth.