It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Magnetite is widely used in various fields of separation and adsorbent. Various studies have also reported that magnetite without modification have low thermal stability, low water solubility and may undergo reactions forming a FeOOH intermediate phase. The use of silica templates is done in such a way that the magnetite produced is not easily agglomerated. The source of silica can easily be found in nature, one of which is kaolin. Synthesis of Fe3O4/SiO2 nanocomposites from Kaolin Bangka Island was carried out. The source of silica used is sodium silicate which is made from kaolin. The parameter observed in this study is the effect of silica concentration on the formation of Fe3O4/SiO2 nanocomposites. The SiO2 concentrations used were 5%, 15% and 30%. Based on the XRD analysis results, it appears that the three samples have typical diffraction peaks from Fe3O4/SiO2 nanocomposites at 2θ 24°, 26° and 35°. The average particle size of each composite for 5%, 15% and 30% SiO2 concentrations is 50.05 nm, 43.21 nm and 41.68 nm. It can be concluded that nanocomposite with SiO2 concentration of 30% has the potential to be applied further as a heavy metal adsorbent. FTIR analysis showed an absorption peak indicating the silica has coated the magnetite material from Fe3O4.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Department of Chemistry, Faculty of Engineering, Universitas Bangka Belitung, Kampus Terpadu Universitas Bangka Belitung Balunijuk, Kecamatan Merawang, Kabupaten Bangka, Provinsi Kepulauan Bangka Belitung, 33172, Indonesia.
2 Department of Physics, Faculty of Engineering, Universitas Bangka Belitung, Kampus Terpadu Universitas Bangka Belitung Balunijuk, Kecamatan Merawang, Kabupaten Bangka, Provinsi Kepulauan Bangka Belitung, 33172, Indonesia