It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Water power is a renewable energy source which has great potential in replacing fossil energy for generating electricity. The aim of this research is to analyze the influence of vertical distance of water source (water head) and nozzle diameter on the electrical power generated by Pelton turbine. It used Pelton turbine type with 22 buckets (vanes) which employed a PMG 200 watts generator with 1 : 2 pulley transmission system. Four different values of nozzle diameter and three different values of water head were chosen as the design parameters of the turbine. The electrical power was measured in three replications for each combination of the design parameters. The research showed that water head and nozzle diameter significantly affect the power generated by the Pelton turbine. The higher the water head from the surface, the more power generated. It was found that the electric power linearly increases with the increasing of nozzle diameter. However, it reaches the peak in 9 mm nozzle diameter and is getting lower in a larger diameter. The highest electric power of 16.89 watt is observed by adjusting the water head on 4.6 m with 9 mm nozzle diameter. Those design parameters are able can produce a rotation speed at 320 rpm in the generator. By identifying the appropriate parameters, it is possible to have more power generated by the water turbine used for hydroelectric power generation plant.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Department of Mechanical Engineering Education, Sebelas Maret University, Surakarta, Indonesia.