Abstract

By the method of free liquid-phase sintering, dense materials based on silicon carbide (P ≤ 0.5%) were obtained. In the preparation of charge powders, the method of co-precipitation of oxides on silicon carbide powder was used. As a sintering additive, a eutectic mixture of the components MgO, Y2O3, and Al2O3 was used, corresponding to the composition on the garnet-spinel line. The resulting materials have a high level of mechanical properties: E = 410 GPa; σ = 680 MPa; K 1C = 6.0 MPa*m1/2; HV = 21.5 GPa, approaching the level of properties of hot-pressed silicon carbide materials.

Details

Title
Liquid-sintered SiC based materials with additive low oxide oxides
Author
Perevislov, S N 1 ; Lysenkov, A S 2 ; Titov, D D 2 ; Kim, K A 2 ; Tomkovich, M V 3 ; Nesmelov, D D 4 ; Markov, M A 4 

 Institute of Silicate Chemistry I.V. Grebenshchikov Russian Academy of Sciences, St. Petersburg, Russia 
 Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow, Russia 
 Physico-Technical Institute A.F. Ioffe Russian Academy of Sciences, St.-Petersburg, Russia 
 St.-Petersburg State Institute of Technology (Technical University), St.-Petersburg, Russia 
Publication year
2019
Publication date
Apr 2019
Publisher
IOP Publishing
ISSN
17578981
e-ISSN
1757899X
Source type
Scholarly Journal
Language of publication
English
ProQuest document ID
2561025743
Copyright
© 2019. This work is published under http://creativecommons.org/licenses/by/3.0/ (the “License”). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.