It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
By using ultrasound velocity measurements, it is possible to estimate the material anisotropy. Because of material anisotropy, distinct sound velocities are obtained for different measured directions. To qualify the ultrasonic inspection procedure, four conditions of the material, three different directions (with relation of the rolling direction) and two operators were used. After the measurement, the values were analyzed using the ANOVA method. Finally, it was possible to verify that there is no interference of the operator, which guarantees a good reproducibility of the inspection procedure, and that there is interference of the direction of inspection, demonstrating the condition of anisotropy of the material.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Universidade Federal da Bahia
2 Instituto Federal de Chapec
3 Senai/Cimatec