It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
This paper presents a series of experiments on flow boiling heat transfer coefficient and pressure drop using refrigerant R32. Tests were performed in a smooth horizontal stainless steel tube with an internal diameter of 6.00 mm, with the heat directly applied on the test section tube through DC current. Trends of the heat transfer coefficient and pressure drop data are displayed for different operating conditions. Specifically, the saturation temperature was fixed to 25 and 35 °C, the heat flux varied from 5 to 50 kW/m2 and the mass velocity was fixed to the low values of 150 and 250 kg/m2 s. The effects of the operating parameters on the heat transfer results are also shown.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Department of Industrial Engineering, Federico II University of Naples, P.le Tecchio 80, 80125, Naples (Italy