It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
In this paper we report synthesis and analysis of low cost screen printed coating of TiO2 in the form of thick film fabricated on glass substrate followed by annealing at 350 °C. The film has been characterized by x-ray diffraction (XRD), Scanning electron microscope (SEM) with energy dispersive x-ray (EDX), UV-visible and Fourier-transform infrared(FTIR) spectroscopy and current-voltage (I-V) measurement via two probe. The XRD analysis showed that the prepared thick film has crystal structure of anatase phase with preferred orientation of (1 0 1)plane. The SEM image identified porous nature of film while EDX spectra revealed the presence of titanium and oxygen atoms in the film. The FTIR spectrum displayed the strong presence of TiO2. DC electrical conductivity measurements revealed that electrical conductivity increases on increasing temperature which confirms semiconducting behaviour.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
; Boora, Navjyoti 2 ; Malik Mubasher Hassan 3 ; Khan, Aslam 4
; Hafiz, Aurangzeb Khurram 2 1 Department of Physics, Baba Ghulam Shah Badshah University, Rajouri (J&K), 185234, India; Material Science Lab. University Polytechnic BGSBU, Rajouri (J&K), 185234, India
2 Centre for Nanoscience & Nanotechnology, Jamia Millia Islamia, New Delhi, 110025, India
3 Material Science Lab. University Polytechnic BGSBU, Rajouri (J&K), 185234, India; Department of ITE, Baba Ghulam Shah Badshah University, Rajouri (J&K), 185234, India
4 King Abdullah Institute for Nanotechnology, King Saud University, Riyadh, 11451, Saudi Arabia




