Full Text

Turn on search term navigation

1. Introduction

Low-light enhancement methodologies try to recover buried details, remove the noise, restore the color details, and increase the dynamic range and contrast of the low-light images. Low light has inescapable effects on remote monitoring equipment and computer vision tasks. Low signal-to-noise ratio (SNR) causes severe noise in low-light imaging and makes it difficult to extract features for interpreting remote-sensing via computer vision tasks, whereas the performance of computer vision tasks entirely depends on accurate feature extraction [1]. Remote-sensing image enhancement has a wide range of applications in object detection [2,3], object tracking [4,5,6,7], video surveillance [8,9], military applications, daily life [10,11,12,13,14], atmospheric sciences [15], driver assistance systems [16], and agriculture. Earth is continuously being monitored by analyzing the images taken by satellites. Analyzing remotely taken images to help in fire detection, flood prediction, and understanding other environmental issues. Low-light enhancement of these images is playing a vital role in understanding these images in a better way. Even the accuracy of other remote sensing algorithms, such as classification and object detection, depends entirely on the image’s quality. In the literature, different methodologies exist for enhancing such degraded low-light images. Retinex theory-based enhancement methods are widely accepted among these enhancement methodologies due to their robustness. The main purpose of this study is to compare the Retinex-based methods with other non-Retinex-based enhancement methods experimentally. For comparison, we have categorized all the enhancement methods into two major groups (i.e., Retinex-based and non-Retinex-based methods). The Retinex group includes classical and deep learning-based Retinex enhancement methods. Meanwhile, the non Retinex group includes histogram equalization, gamma correction, fusion, and deep learning-based enhancement methods.

According to Retinex theory [17], an image can be decomposed into reflectance and illumination component. The reflectance component is considered an intrinsic component of the image and remains consistent under any lighting condition, whereas the illumination component represents the different lighting conditions. Later on, different Retinex theory based methods, such as single-scale retinex (SSR), [18] multiscale retinex with color restoration (MSRCR) [19], simultaneous reflectance and illumination estimation (SRIE) [20], and low-light illumination map estimation (LIME) [21] were developed for low-light enhancement. These methods produce promising results but may require fine-tuning of parameters and may fail to decompose the image correctly into reflectance and illumination parts. Wei et al. is the first one to introduce a real low/normal-light LOw-Light (LOL) dataset and Retinex theory-based deep network (Retinex-Net) in [22]. Retinex-Net comprises Decom-Net for decomposing the image into reflectance and illumination parts and an Enhance-Net for illumination adjustment. Later on, different Retinex theory-based deep learning methods were developed for low-light image enhancement algorithm [22,23,24,25].

Non-Retinex method such as histogram equalization is one of the simplest methods for enhancing low-light images. It flattens the distribution of pixel values throughout the image to improve contrast. In addition, using entire histogram information may over brighten some regions of the image, deteriorate its visual quality and introduce some artifacts in it. Different histogram-based methods such as local histogram equalization [26] and dynamic histogram equalization [27] were introduced to address these issues. However, these methods require higher computation power, the quality of the output depends on the fine-tuning of parameters, and in case of severe noise, it may produce artifacts. On the other hand, gamma correction based methods [28,29,30] apply the pixel-wise nonlinear operation to enhance the image. The main drawback of these methods is that each pixel is considered an individual entity, and their relationship with neighbor pixels is entirely ignored. Due to this, the output may be inconsistent with real scenes. Lore et al. [31] is the first to propose a learning-based enhancement network named LLNet using a synthetic dataset. Later on, different low-light training datasets (e.g., LOL [22], SID [32], SICE [33], VV (https://sites.google.com/site/vonikakis/datasets (accessed on 7 July 2021)), TM-DIED (https://sites.google.com/site/vonikakis/datasets (accessed on 7 July 2021)), and LLVIP [34]) were developed in order to assist the development of learning-based architectures [35,36,37,38].

Wang et al. [39] present a technical evaluation of different methods for low-light imaging. Most of the methods reviewed are classical, and comparing evaluations on five images is quite unfair. Later on, Qi et al., in [40], provide an overview of low-light enhancement techniques, whereas the quantitative analysis of a few methods only on the synthetic dataset (without noise) is provided. Noise is the most critical part of low-light enhancement and a single synthetic low-light dataset cannot compare performance. In [41], Li et al. propose a low-light image and video dataset to examine the generalization of existing deep learning-based image and video enhancement methods. In sum, low-light enhancement has a wide range of applications and is one of the most important image processing fields. To the best of our knowledge, no such study paper is present in the literature mentioned above that extensively provides the technical evaluation of low-light enhancement methods.

The main purpose of this research is to fairly compare the performance of Retinex-based enhancement methods with non-Retinex enhancement methods on a wide range of test datasets covering different contents and lighting conditions. For a fair comparison, the experimental evaluation criteria are defined first, and then all the methods are compared based on the criteria. In addition, an average ranking system is suggested to rank the enhancement methods based on their robustness. Computational complexity analysis of methods is also carried out on four different image sizes for real-time application. This experimental comparison and suggested ranking system of enhancement methods help the research community to understand their shortcomings and to design more robust models in the future.

The main contribution of this research can be summarized as follows:

A comprehensive literature review is presented for Retinex-based and non-Retinex methods.
A detailed experimental analysis is provided for a variety of Retinex-based and non-Retinex methods on a variety of publicly available test datasets using well-known image quality assessment metrics. Experimental results provide a holistic view of this field and provide readers with an understanding of the advantages and disadvantages of existing methodologies. In addition, the inconsistency of commonly used evaluation metrics is pointed out.
An analysis of the computational effectiveness of enhancement methods is also conducted on images of different sizes. As a result of this computation cost, we can determine which enhancement methods are more suitable for real-time applications.
Publicly available low-light test datasets were ranked based on experimental analysis. In developing more robust enhancement methods, the reader will benefit from this ranking of benchmarking test datasets.

The rest of the paper is organized as follows. Section 2 presents the relevant background knowledge of non-Retinex-based, and Retinex-based classical and advanced low-light enhancement methodologies. Section 3 presents the objectives of overall paper. In Section 4, experimental setup is defined, a detailed discussion of the qualitative, quantitative, and computational analysis of the classical and advanced low-light enhancement methodologies are provided. Section 5, reports the challenges and the future trends. Finally, the conclusion is drawn in Section 6.

2. Fundamentals

A thorough review of the literature related to Retinex-based and non-Retinex-based classical and advanced learning-based low-light enhancement methods is presented in this section. The following subsections contain literature on each of the categories mentioned above.

2.1. Retinex-Based Methods

Classical Retinex-based methods: The Retinex theory was developed by Land after he studied the human retina-and-cortex system in detail [17]. According to the presented theory, an image can be decomposed into two parts: reflectance and illumination. Reflectance is considered an intrinsic property and remains the same regardless of the lighting condition. Illumination is determined by the intensity of light. The following representation can be used to explain it:

(1) $S (x, y) = R (x, y) \circ I (x, y),$

where S, R and I represent the source image, reflectance and illumination, respectively and the operator ∘ denotes the element-wise multiplication between R and I. As time progressed, different implementations of Retinex theory were proposed in the literature. Path-based implementation of the Reinex [42,43,44,45,46,47] uses different geometry to calculate the relative brightness of adjacent pixels to obtain the reflection component. Marini and Rizzi proposed a biologically inspired implementation of Retinex for dynamic adjustment and color constancy in their article [45]. In [44], the authors examine the different path-wise approaches in detail and propose a mathematical formula to analyze these approaches. It is worth noting that the number of paths has a significant impact on the accuracy of the results. As a result, these path-wise implementations of Retinex theory suffer from a high degree of dependency on the path and sampling noise, as well as a high cost of computation when fine-tuning parameters.

The new method, random spray Retinex (RSR), was developed by Provenzi after replacing the paths with 2-D pixels sprays in [48]. When paths are replaced with 2-D random points distributed across the image, it is possible to determine the locality of color perception. Even though this approach is faster, the spray radius, radial density function, number of sprays, and pixels per spray must be adjusted. Jobson et al., in [18], used a single-scale Retinex (SSR) to implement Retinex for color constancy, and lightness and color rendition of grayscale images. It is not possible for the SSR to provide both dynamic range compression (small scale) and tonal rendition (large scale) simultaneously. However, it can only perform one of these tasks. Later, the authors of SSR extended their idea to multiscale retinex with color restoration (MSRCR) [19]. As a result of MSRCR, dynamic range compression, color consistency, and tonal rendition can be provided. SSR and MSRCR both improve lighting and scene restoration for digital images, but halo artifacts are visible near edges [49]. The majority of Retinex-based algorithms ignore the illumination component and only extract the reflection component as an enhanced result, but this results in unnaturalness. Enhancing an image is not just about enhancing details but also about maintaining its natural appearance. To solve the unnatural appearance, Wang et al. [50] make three contributions: (1) lightness-order-error metrics are proposed to measure objective quality, (2) bright-pass filters decompose images into reflectance and illumination, and (3) bi-log transformations to map illumination while maintaining the balance between details and naturalness.

Zosso et al. reviewed Retinex-based methods and classified them into five broad categories in [51]. Additionally, a two-step non-local unifying framework is proposed to enhance the results and address the Retinex problem. In the first step, a quasi gradient filter is obtained which satisfies gradient-sparsity and gradient-fidelity prior constraints. As a second step, additional constraints are applied to the calculated quasi-gradient filter in order to make it fit the reflectance data. Guo et al. devised a method named low-light illumination map estimation (LIME) [21] to estimate the illumination of each pixel first; then, apply a structure to that illumination map and use it as the final illumination map. A variational based framework (VF) was introduced for Retinex for the first time by Kimmel et al. [52]. In accordance with previous methods, the objection function is based on the assumption that the illumination field is smooth. On the other hand, this model lacks information regarding reflectance. Later on, different variational approaches to Retinex theory are presented [53,54,55]. In [56], a total variational model (TVM) for Retinex is proposed, assuming spatial smoothness of illumination and piecewise continuity of reflection. In order to minimize TVM, a split Bregman iteration is used. VF and TVM differ primarily in that TVM also takes into account reflection.

Fu et al. proposed a linear domain probabilistic method for simultaneous illumination and reflectance estimation (PM-SIRE) [49]. By using an alternating direction multiplier method, maximum a posteriori (MAP) is employed to estimate illumination and reflectance effectively. Later, Fu et al. presented a weighted variational model for simultaneous illumination and reflectance estimation (WV-SIRE) [20]. A WV-SIRE model is capable of preserving more details about the estimated reflectance as well as suppressing noise more effectively than a log-transformed model. The PM-SIRE and WV-SIRE both assume that illumination changes smoothly over time, which may lead to incorrect illumination estimation. Based on the luminous source, different surfaces are illuminated in different directions.

A fusion-based method for enhancing weakly illuminated images is proposed in [57]. This fusion method decomposes a weakly illuminated image into a reflectance map and an illumination map. By using sigmoid and adaptive histogram equalization functions, the illumination map is further decomposed into luminance-improved and contrast-enhanced versions, and two weights are designed for each. Finally, an enhanced image is obtained by combining the luminance-improved and contrast-improved versions with their corresponding weights in a multi-scale manner. For the purpose of preserving intrinsic and extrinsic priors, Cai et al. proposed a joint intrinsic-extrinsic prior (JieP) model [58]. In JieP, shape prior is used to preserve structure information, texture prior is used to estimate illumination with fine details, and illumination prior is used to capture luminous information. Ying et al. [59] simulate the camera response model (CRM) by investigating the relationship between two different exposure images and use the illumination estimation to estimate the exposure ratio map. Later, the CRM and exposure ratio map are used to produce the enhanced image. According to the CRM algorithm, some dark parts of the body, such as the hair, are misinterpreted as dark backgrounds, and they are over-enhanced as well.

Advanced Retinex-based methods: The robustness of Retinex theory makes it applicable to deep learning methods as well. Wei et al. were the first to combine the idea of Retinex theory with deep learning by proposing the Retinex-Net network. Retinex-Net consists of a Decom-Net for decomposing the image into reflectance and illumination parts and an Enhance-Net for adjusting illumination. Furthermore, they introduce a real low/normal-light Low-Light (LOL) dataset [22]. As a further development of the Retinex theory, Zhang et al. proposed the kindling the darkness (KinD) network in [36]. There are three components of KinD: layer decomposition, reflectance restoration, and illumination adjustment. As a result of layer decomposition, the input image is divided into reflectance and illumination elements, the reflectance part is improved by reflecting restoration and the illumination part is smoothed piece-by-piece by illumination adjustment. By combining the outputs of the reflectance and illumination modules, the final result is achieved. Artifacts, overexposure, and uneven lighting are common problems with KinD outputs. For mitigating these effects, Zhange et al. proposed an improved version of KinD in [60]. This improved version of KinD implements a multi-scale illumination attention module, known as KinD++. KinD++ has improved the quality of output images, but it has a lower computational efficiency than KinD. In [61], a Retinex-based real-low to real-normal network (R2RNet) was proposed. R2RNet consists of a decomposition network, a denoise network, and a relight network, each of which is trained separately using decomposition loss, denoise loss, and relight loss, respectively. As a result of decomposition, illumination and reflectance maps are produced. The denoise-net uses the illumination map as a constraint to reduce the noise in the reflectance map, and the relight-net utilizes the denoised illumination map and reflectance map in order to produce an enhanced output. It is noteworthy that three separately trained networks are utilized to solve the low-light enhancement problem, which is not an optimal strategy. Decomposing an image into illumination and reflectance is a computationally inefficient process. Retinex-based transfer functions were introduced by Lu and Zhange in [23] to solve this decomposition problem. As opposed to decomposing the image, the network learn the transfer function to obtain the enhanced image. Liu et al. [62] introduces reference free Retinex-inspired unrolling with architecture search (RUAS) to reduce computational burden and construct lightweight yet effective enhancement. First, RAUS exploits the intrinsic underexposed structure of low-light images; then, it unrolls the optimization process to establish a holistic propagation model. Wang et al. [63] presents paired seeing dynamic scene in the dark (SDSD) datasets. A self-supervised end-to-end framework based on Retinex is also proposed in order to simultaneously reduce noise and enhance illumination. This framework consists of modules for progressive alignment, self-supervised noise estimation, and illumination map prediction. With progressive alignment, temporal information is utilized to produce blur-free frames, self-supervised noise estimation estimates noise from aligned feature maps of the progressive module, and illumination estimation estimates illumination maps consistent with frame content.

Retinex theory is also used in semi-supervised and zero-shot learning-based techniques for enhancing low light visibility. In Zhang et al. [24], a self-supervised maximum entropy Retinex (ME-Retinex) model is presented. In the ME-Retinex model, a network for enhancing image contrast is coupled with a network for re-enhancing and denoising. Zhao et al. [64] proposed a zero-reference framework named RetinexDIP that draws inspiration from the concept of a deep image prior (DIP). The Retinex decomposition is carried out in a generative manner in RetinexDIP. From random noises as input, RetinexDIP generates both reflectance and illumination maps simultaneously, and enhances the illumination map resulting from this process. The proposed model generalizes well to various scenes, but producing an illumination map requires hundreds of iterations. This iterative learning approach consumes a lot of time to produce optimized results. The robust retinex decomposition network (RRDNet) is a three-branch zero-shot network that is proposed in RRDNet [25] to decompose low-light input images into illumination, reflectance, and noise. RRDNet weights are updated by a zero-shot scheme using a novel non-reference loss function. In the proposed loss function, there are three components: the first part reconstructs the image, the second part enhances the texture of the dark region, and the third part suppresses noise in the dark regions. Qu et al., in [65], segmented an image into sub-images, applied deep reinforcement learning to learn the local exposure for each sub-image and finally adversarial learning is applied to approximate the global aesthetic function. It is also proposed to learn discriminators asynchronously and reuse them as value functions.

2.2. Non-Retinex Methods

Histogram equalization (HE) [66] is one of the earlier methods used for enhancing the dynamic range of low-light images. It is a well-known method due to its simplicity. When the entire image histogram is balanced, the visual quality of the image is deteriorated, false contours are introduced, and annoying artifacts are introduced into the image [67]. As a result, some uniform regions become saturated with very bright and very dark intensities [68]. Gamma correction [69] is a non-linear classical technique that is used for image enhancement. It increases the dark portion of the image while suppressing the bright portion. During gamma correction, each pixel is treated as an individual. It is possible that some regions of the image will be under- or over-enhanced due to a single transformation function used for each pixel.

In later years, deep learning has been applied to my field of study. Lore et al. [31] were the first one to use a stacked sparse based autoencoder approach called LLNet for joint enhancement and noise reduction. There is evidence that deeper networks perform better than non-deeper networks; however, deeper networks suffer from gradient vanishing problems. To use a deeper network and solve the gradient vanishing problem, Tao et al. in LLCNN [70] proposed a special module to utilize multiscale feature maps for low-light enhancement. A multi-branch low-light enhancement network (MBLLEN) is designed by Lv et al. in [71] to extract features of different levels, enhance these multi-level features, and fuse them in order to produce an enhanced image. Additionally, Lv et al. also propose a novel loss function that takes into account the structure information, context information, and regional differences of the image. Wang et al., in [72], propose the global illumination-aware and detail-preserving network (GLADNet). In the first step, GLADNet uses an encoder-decoder network to estimate the global illumination and then reconstructs the details lost during the rescaling process. The major disadvantage of LLNet, LLCN, MBBLEN and GLADNet is that they were trained on synthetically darkened and noise-added datasets. Chen et al. [32] used a Unet based pipeline for enhancing and denoising extremely low-light images using the RAW training see-in-the-dark (SID) dataset. This Unet-based pipeline is designed specifically for images in RAW format. Practically, the most common image format is sRGB. The majority of previous methods have used pixel-wise reconstruction losses and failed to provide effective regularization of the local structure of the image, which in turn undermines the network’s performance. The pixel-to-pixel deterministic mapping results in improperly exposed regions, introduces artifacts, and fails to describe the visual distance between the reference and the enhanced image. A flow-based low-light enhancement method (LLFlow) has been proposed by Wang et al. [38] to address this pixel-to-pixel mapping issue. It is possible to map multi-modal image manifolds into latent distributions using the normalizing flow. Effectively enhanced manifolds can be constructed using the latent distribution.

Getting low-light and normal-light images paired can be difficult, expensive, or impractical. An unpaired low-light enhancement method called EnlightenGAN is proposed by Jiang et al. [73] to eliminate the need for paired training datasets. A global-local discriminator structure and an easy-to-use attention U-net generator are proposed in EnlightenGAN. By designing the attention U-net only to enhance the dark regions more, the image is neither overexposed nor underexposed. A dual global-local discriminator strategy contributes to the balance between local and global enhancement of low-light images. Xiong et al. [74] considered low-light enhancements as two subtasks: illumination enhancement and noise reduction. A two-stage framework referred to as decoupled networks is proposed for handling each task. In decoupled networks, there are two encoder-decoder architectures, the first architecture enhances illumination, and the second architecture suppresses noise by taking the original input along with the enhanced output from stage one. To facilitate unsupervised learning, an adaptive content loss and pseudo triples are proposed. Xia et al. [75] used two images of the scene taken in quick succession (with and without a flash) to generate a noise-free and accurate display of ambient colors. Using a neural network, an image taken without flash is analyzed for color and mood, while an image taken with a flash is analyzed for surface texture and details. One of the major disadvantages of this method is that paired images with and without flash are not generally available.

The camera sensors on mobile phones perform poorly in low-light conditions. An improved face verification method using a semisupervised decomposition and reconstruction network is proposed in [76] to improve accuracy for low-light images of faces. Yang et al. [77] proposes a deep semi-supervised recursive band network (DRBN) to address the decreased visibility, intensive noise, and biased color of low-light images. DRBN learns in two stages, the first stage involves learning the linear band representation by comparing low- and normal-light images, and the second stage involves recomposing the linear band representation from the first stage to fit the visual properties of high-quality images through adversarial learning. Further improvement of the DRBN is impeded by the separation of supervised and unsupervised modules. Qiao et al. [78] further improved DRBN performance by introducing a joint training based semi-supervised algorithm. Wu et al. [79] proposed the lightweight two stream method to overcome the limitations of the training data due to sample bias and the hurdle of the large number of parameters in real-time deployment. Additionally, a self-supervised loss function is proposed to overcome the sample bias of the training data.

Guo et al. [80] proposes zero-reference deep curve estimation (Zero-DCE) rather than performing image-to-image mapping. In order to preserve the contrast of the neighboring pixels, Zero-DCE creates high-order curves from low-light images and then adjusts low-light images pixel-by-pixel using these high-order curves. It is superior to existing GAN-based methods since it does not require paired or unpaired data for its training. Enhanced images are produced with four non-reference loss functions: spatial consistency loss, exposure control loss, color constancy loss, and illumination smoothness loss. The re-design and reformulation of the network structure were subsequently carried out by Li et al., who introduced Zero-DCE++, which is an accelerated and lighter version of Zero-DCE.

3. Objectives of Experimental Study

This research study aims to address the following questions:

1.. It has been noted that although there have been a large number of algorithms developed for low-light enhancement, Retinex theory-based models are gaining more attention due to their robustness. Retinex theory is even used in deep learning-based models. Specifically, this paper attempts to compare the performance of Retinex theory-based classical and deep learning low-light enhancement models with other state-of-the-art models.
2.. Several low-light enhancement methods perform well on some test datasets but fail in real-world scenarios. An extensive range of real-world images should be used to test the robustness of the low-light enhancement models. As a means of assessing the robustness of enhancement methods in real-world scenarios, various test datasets spanning a wide range of lighting conditions and contents need to be selected, and the performance of Retinue-based models needs to be compared with that of other enhancement techniques on these test datasets.
3.. The trend of real-time cellphone night photography is increasing day by day. Therefore, analyzing the computational costs associated with low-light enhancement methods is necessary. Comparison of not only the parameters of these methods but also the processing time for the images of four different sizes (i.e., $400 \times 600 \times 3$ , $640 \times 960 \times 3$ , $2304 \times 1728 \times 3$ and $2848 \times 4256 \times 3$ ) is required. A computational analysis of different sizes of images will enable the researchers to determine whether the computational cost increases linearly or exponentially as the image size increases.
4.. The quality of low-light enhancement methods needs to be evaluated using a variety of image quality assessment (IQA) methods. Every metric aims to identify the particular quality of the predicted image. The LOE measures the naturalness of the image, whereas the information entropy measures the information contained in the image. What is the most effective method of comparing the robustness of low-light enhancement methods when comparing results based on these evaluation metrics?

4. Quantitative and Qualitative Analysis

This subsections of this section present the experimental setup for farily comparing the methods, qualitative, quantitative comparison, and computational cost analysis of enhancement methods. In addition, it also discusses the evaluation metrics and test datasets.

4.1. Experimental Criteria for Enhancement Methods Comparison

To conduct a fair comparison to analyze the enhancement methods generalization, we have selected the nine different publicly available test datasets widely used in the literature for comparing the performance of enhancement methods [64,73,81]. The selected datasets include LIME [21], LOL [22], DICM [82], VV (https://sites.google.com/site/vonikakis/datasets (accessed on 7 July 2021)), MEF [83], NPE [50], LSRW [61], SLL [84] and ExDark [85]. The main purpose of selecting these different nine test datasets is to cover diversified scenes, camera devices, lighting conditions (i.e., weak lighting, under exposure, twilight, dark), and contents. In summary, each test dataset covers a different aspect of low-lighting, scene or content. Therefore, these test datasets are useful to compare the performance of enhancement methods from different aspects.

The four most commonly used no-reference metrics for the quantitative evaluation of low-light enhancement methods are used. These metrics include entropy [86], BRISQUE [87], NIQE [88], and LOE [50]. The entropy measures the information content of an image. a higher value of entropy indicates richer details and a higher contrast level of an image. Blind/referenceless image spatial quality evaluator (BRISQUE) is another commonly used model to quantify the quality of low-light enhancement methods. It does not compute the distortion specific feature, but instead it uses the scene statistics to quantify the loss of naturalness in an image due to the presence of distortion. BRISQIE uses a space vector machine (SVM) regressor to predict the quality of the image. Natural image quality evaluator (NIQE) quantifies the quality of the distorted image by measuring the distance of natural scene statistic (NSS) feature model and the multivariate Gaussian (MVG) feature model of distorted image. Lightness order error (LOE) is designed to measure the order of lightness. The order of lightness represents the direction of the light source and helps to quantify the naturalness preservation. LOE can be defined as follows:

(2) $L O E = \frac{1}{m * n} \sum_{x = 1}^{m} \sum_{y = 1}^{n} (U (Q (i, j), Q (x, y)) \oplus U (Q_{r} (i, j), Q_{r} (x, y))),$

where

U (x, y)

is a unit step function. It returns 1 if

x > y

and returns 0 otherwise. m, n represents height and width of the image, respectively. Moreover,

Q (i, j)

and

Q_{r} (i, j)

are maximum values among the three color channels at location

(i, j)

for the original image and enhanced image, respectively.

In this study, the performance of 17 Retinex-based methods and 17 non-Retinex will be compared. We consider the publicly available codes and recommended settings of these methods to have a fair comparison. The higher value of entropy indicates better quality and for the other three methods (i.e., LOE, NIQE, and BRISQUE) lower values of entropy indicate the better image quality. To show a better understanding the comparison, average ranking has been suggested to enhancement methods based on these IQA methods. For example, the enhancement methods that got the highest average score of entropy on all test datasets are given rank 1 and vice versa. Similarly, the enhancement methods show the lowest average score according to LOE or NIQE or BRISQUE are assigned rank 1 and the highest average score is assigned the highest rank. Rank 1 indicates the best performance and the rank with higher value indicates the worst performance.

In addition, we compare the computational complexity of classical methods on images of four different sizes. The classical codes computational complexity is computed on CPU, whereas those of deep learning-based methods on NVIDIA Titan Xp GPU.

4.2. Qualitative Evaluation of Enhancement Methods

In this section, we provide a detailed description of the qualitative evaluation of enhancement methods. The comparative visual results of the top ten classical and advanced methods on six publicly available test datasets are shown in Figure 1 and Figure 2, respectively. These figures’ first to sixth columns indicate the enhancement results of different methods on LIME, LARW, DICM, ExDark, LOL, and SLL datasets, respectively. For simplicity, deep learning and classical methods are discussed one by one. It is encouraged to zoom in to compare the results.

Zero-shot learning-based methods (i.e., ZeroDCE and RetinexDIP) produce darker and noisy images compared to other methods. The results of GLADNet, TBEFN, and LLFlow are more realistic, sharper, less noisy, and have accurate color rendition. The output images of MBLLEN are over-smoothed and darker but less dark than ZeroDCE. GLADNet, TBEFN, LLFlow, MBLLEN, and KinD are trained on paired data. The supervised learning-based models achieved the appropriate restoration of color and textures, noise suppression, and better generalization. However, no method has produced good results on all the datasets. For example, GLADNet results on DICM are too noisy and produce artifacts on the ExDark image. Similarly, strange artifacts on DICM images are produced by TBEFN. LLFLow produces greenish color around the edges of LSRM image. As it can be seen, StableLLVE has a lighter washed-out effect and smoothed edges on all the results. KinD results look realistic, but some parts of the image look too dark, such as the background chairs in the LOL image. SS-Net produces a good result on the VV test image but produces poor results on DICM and ExDark. Moreover, the strange pattern, missing color information, and other details can be observed easily on the ExDark image. The results of Retinex-based methods (i.e., TBEFN, KinD, SS-Net, RetinexDIP) look more natural and real.

The classical methods (i.e., CVC, DHE, BIMEF, IAGC, and AGCWD) shown in the Figure 2 belong to the non-Retinex category, and PM-SIRE, WV-SRIE, JieP, EFF, and NPE belongs to Retinex theory. If we closely observe their visual results, one thing that is common among majority of these methods is noise. Except for BIMEF and EFF, most results can easily observe noise. The average brightness of BIMEF is too low and does not enhance the overall image. On the other hand, EFF produces higher brightness results, but the image’s details are not too sharp. CVC and IAGC do not accurately render the color information, making their results look black and white. Although some classical methods’ results quality is good, their results are still darker than deep learning-based methods. The results produced by BIMEF, IAGE, and CVC are darker as compared to other classical methods. Over-enhancement, severe noise and loss of color information can be seen in the results of DHE. The results of CVC are not only darker but also lost color information. AGCWD produces low contrast and less bright images, and some parts of the image are too dark (for example background buildings in the LIME test image and the background wall in the LOL test image). Gamma correction-based methods (i.e., AGCWD and IAGC) enhance some parts of the image while darker parts become darker. Strange artifacts around the fire can be easily seen in the IAGC result on the ExDark image.

The results of Retinex-based methods (NPE and WV-SIRE) enhance the image’s brightness, contrast, and sharpness, but fail to suppress the noise. The major issue with the majority of traditional methods is noise suppression. Histogram-based methods work to balance the histogram of the image to increase the brightness and contrast, but there is no such mechanics to remove the noise. Meanwhile, gamma correction-based methods treat each pixel individually and fail to exploit their relationship with neighbor pixels, which results in different artifacts and noise. In contrast, Retinex theory-based methods create different algorithms for successfully decomposing low-light images into reflectance and illumination components. In the case of severe noise, decomposing the image becomes difficult. The noise is not considered a major factor in any of these approaches. Therefore, noise dominates the visual results of these methods. When Figure 1 and Figure 2 are compared, it is evident that deep learning-based methods produce brighter, sharper, cleaner, and higher contrast results. There is still some noise in some results, but compared to traditional methods, it is very low. Contrary to this, traditional visual results have many shortcomings. For example, some results have a lower average brightness, a lesser contrast level, a lesser degree of sharpness, failure to remove noise, and serious color shifts. Some of them enhance the image and the noise associated with it.

4.3. Quantitative Comparison of Enhancement Methods

Four non-reference evaluation metrics were used for the quantitative comparison. There are two reasons for using no-reference-based IQA metrics: (1) the majority of widely used test datasets are no-reference, and (2) unsupervised methods are emerging. Metrics adopted for evaluation include NIQE [88], BRISQUE [87], LOE [50], and Entropy. Low NIQE, BRISQIE, and LOE values indicate better image quality. In contrast, higher values of entropy indicate richer information. Table 1, Table 2, Table 3 and Table 4 provide quantitative results for these metrics. Red indicates the best scores obtained on each dataset, while blue and green indicate the second and third best scores. The LOE indicates that non-Retinex methods perform better, whereas the other three metrics show that performance is uniform across both categories (i.e., Retinex and non-Retinex). Each method is evaluated by four metrics. There is no winner on all four metrics. To determine which method generalizes well, the enhancement methods score on all test data is averaged. The last column of the aforementioned tables represents the average score of enhancement methods on all test datasets. Based on averaged score, ranking number is assigned to each method and we summarize these rankings in Figure 3. Ranking 1 goes to the method with the best average score, and ranking 31 to the method with the worst average score. Different metrics rank enhancement methods differently. For instance, AGCWD ranked first according to LOE metric, whereas the same method is ranked as fifth, eighteenth, and twenty-ninth according to BRISQIE, NIQE, and entropy, respectively. Instead of analyzing the enhancement methods based on different metrics, we have taken the average of the ranking assigned based on the mentioned metrics and discussed the results of this average ranking.

The red line in Figure 3 represents the average ranking achieved by enhancement methods on all test datasets. The average ranking puts GLADNet, TBEFN, and LLFlow in first, second, and third, respectively. GLADNet generalizes well despite being trained on 5000 synthetic images using $L_{1}$ loss. Retinex-based methods TBEFN, WV-SIRE, JieP, and KinD also generalized well and received the 2nd, 4th, 5th, and 6th rankings, respectively. TBEFN [23] is trained on a mixture of 14,531 patches collected from SICE [33] and LOL [22] datasets using SSIM, total variation, and VGG loss. KinD is based on Retinex theory and trained on LOL. A self-supervised network and a zero-shot-based Retinex method (i.e., self-supervised network and RetinexDIP) ranked 12th and 21st, respectively. MBLLEN is also a supervised learning-based networks and ranked 10th. Meanwhile, MBLLEM is a multi-branch fusion network trained on the PASCAL VOC dataset [101]. Zero-shot learning-based methods such as Zero-DCE got 19th. Among all deep learning-based methods, the top six methods are supervised learning-based methods. It is also worth noticing that among the top ten methods, five are Retinex-based methods and 5 are non-Retinex methods.

4.4. Computational Complexity Analysis of Enhancement Methods

The computational complexity analysis of classical methods and deep learning-based methods is presented in Table 5 and Table 6, respectively. The analysis is conducted on four different test datasets (i.e., LOL, LSRW, VV, and SID). Table 5 and Table 6 report the average time taken and the resolution of a single image for each dataset. For each of these tables, red, blue, and green colors are used to indicate the best, second best, and third best performance, respectively. Results shown in Table 5 have been obtained using a CPU, while results shown in Table 6 have been obtained using an NVIDIA Titan Xp GPU. HE has the shortest runtime of all classical methods. HE just takes around 20.3ms to process an image of resolution $2848 \times 4256 \times 3$ . The majority of HE-based methods, such as BPDHE, WAHE, LDR, CVC, and BiHE, are time-efficient, except for DHE. DHE continuously divides an image into several sub-histogram units in order to avoid leaving a dominant portion in newly created sub-histograms. Due to the continual dividing process, this method is the slowest of all the HE-based methods mentioned. Gamma correction-based methods also have good computational efficiency. IAGC takes relatively longer than other methods because it truncates an image’s cumulative distribution function (CDF) and adaptively corrects each truncated CDF.

Furthermore, Retinex-based methods are more computationally expensive than HE and gamma correction-based methods. NPE, PM-SIRE, and WV-SRIE are among the Retinex-based methods that experience significant increases in computation costs with increasing image size. These methods are computationally inefficient due to their iterative approach to finding the optimal solution and use of Gaussian filtering operations. The efficiency of deep learning-based methods depends on the number of parameters that are used. Zero-DCE is the fastest deep learning-based method due to its simplest network architecture and fewer parameters. The majority of deep learning-based methods’ average runtime is between 1.7 ms and 2.57 s. RRDNet iteratively minimizes the error to produce the final enhanced output. The number of iterations varies for different inputs. The iteratively solving the problem makes it the slowest among all the networks. RetinexDIP is another zero-shot learning-based method and performs 300 iterations on each input to produce the final output. The iteratively solving problem makes RetinexDIP and RRDNet the slowest methods. A scatter plot of methods’ performance versus time taken on CPU and GPU is shown in Figure 4 and Figure 5, respectively. We consider CPU methods with less than 1s processing time and GPU methods with less than 0.5s. Methods closer to the origin have a lower computational cost and better performance.

4.5. Difficulty Analysis of Test Datasets

Results of enhancement methods have also been used to rank the nine test datasets. The last row of Table 1, Table 2, Table 3 and Table 4 shows the average score of different enhancement methods on the test datasets based on LOE, NIQE, Entropy, and BRISQUE, respectively. Figure 6 shows the difficulty rank for each dataset across IQA methods. A red line shows the average of all rankings in Figure 6. As determined by the average ranking score, VV is the easiest test dataset, while SLL is the most challenging. SLL is the synthetic dataset with severe noise added. There is too much noise to remove and produce better results. Meanwhile, VV has a lower noise level, making it the easiest dataset. LOL and ExDark are the second and third most difficult datasets. A test dataset’s difficulty level is determined by its noise level. The higher the noise level, the harder it is to recover color details and other information.

4.6. Evaluation IQA methods

To analyze the objective quality of different enhancement methods, we have used LOE, NIQE, Entropy, and BRISQUE as described in Table 1, Table 2, Table 3 and Table 4, respectively. We can easily identify the differences in the evaluations of these metrics if we compare their values among themselves. The best result was produced by the BPDHE enhancement method, according to LOE and NIQE, whereas BRISQUE evaluated MSRCR and Entropy evaluated GLADnet as best methods. Each metric measures a different aspect of the predicted image, which makes their results different. To easily depict and analyze the overall performance of enhancement methods, we have suggested the average rank from 1 to 31 (depending on how many methods are compared) to compare their performance. The best performance is ranked 1, and the worst performance is ranked 31. These rankings can be seen in Figure 3, where the x-axis represents the enhancement methods, and the y-axis represents the ranking. Green, dotted black, blue, and yellow lines in Figure 3 show the rankings of enhancement methods based on LOE, NIQE, BRISQUE, and Entropy metrics, respectively. Moreover, the red line in Figure 3 represents the average of all the rankings mentioned earlier (given based on different metrics). The best method can be chosen based on this average ranking system.

5. Discussion

In this section, we summarize the results obtained and the findings of the overall paper.

i. The enhancement methods are evaluated using four evaluation metrics. No method has emerged as the clear winner on all four metrics (LOE, entropy, NIQE, BRISQUE). This is due to the fact that each evaluation method measures a different aspect of enhancement methods (e.g., LOE measures naturalness, entropy measures information content, and NIQE measures distortion). A suggested average ranking system is found to be the most reliable method of comparing the overall performance of enactment methods.
ii. In the average ranking system, it has been observed that the three most successful enhancement methods (GLADNet, TBEFN, LLFlow) are based on supervised learning. Among the top ten methods, five are based on Retinex. In comparison to classical, advanced self-supervised, and zero-short learning methods, supervised learning is more effective. Denosing is the most challenging part in enhancement. Noise can be observed in the visual results of outperforming methods.
iii. There is no Retinex-based method among the top three fastest methods. As a result of the image decomposition, these methods are more time consuming. As the size of the image increases, the computational time of classical Retinex-based methods increases dramatically. Zero-DCE is the fastest learning-based method, taking approximately 0.017 s to process an image of size $2848 \times 4256 \times 3$ . However, it ranks 20th in terms of performance. GLADNet, on the other hand, is ranked first, but it takes approximately 2.772 s to process an image of the same size.
iv. The average ranking of all enhancement methods is observed in a broader sense. The results indicate that five methods in the top ten are based on Retinex theory (i.e., TBEFN, WV-SRIE, JieP, KinD, and PM-SIRE). The remaining five fall into different categories (i.e., HE, gamma correction, deep learning). When it comes to real-world scenarios, Retinex theory algorithms are more robust. In contrast, decomposing the image into illumination and reflectance makes them more computationally intensive and, therefore, slower. Computational complexity is the bottleneck for their development in real-world scenarios.

6. Conclusions

In this study, we present an experimental comparison of Retinex-based methods with other non-Retinex methods on nine diversified datasets. According to this study, five out of the top 10 methods are based on Retinex. Researchers are aiming to develop methods that can be generalized and produce enhanced, denoised, color rendered results in real time. Based on the comparisons, ZeroDCE is considered to be the fastest method for processing high-resolution images within 17 milliseconds. However, ZeroDCE ranked 19th and its results were darker and noisy. In contrast, Retinex-based methods have a greater degree of robustness and generalization. The decomposition of the image is a time-consuming process and is a bottleneck in the processing time of Retinex-based methods. Based on the overall ranking, supervised learning methods (e.g., GLADNet, TBEFN, LLFLow) perform better than all other methods. Training images for GLADNet and patches for TBEFN are 5000 images and 14,531 patches, respectively. Both GLADNet and TBEFN are able to generalize well due to their large training data, as well as their Unet architecture which makes them more efficient as compared to other heavy network designs. Moreover, this research evaluated the results of enhancement methods on four different metrics and suggested a method for ranking enhancement methods according to their performance. This research study may help the research community develop more robust and lightweight models for real-time photography and video shooting.

Author Contributions

Conceptualization, M.T.R.; methodology, M.T.R.; software, M.T.R.; validation, M.T.R. and G.G.; formal analysis, M.T.R.; investigation, G.G.; resources, D.S.; data curation, H.K.; writing—original draft preparation, G.G.; writing—review and editing, H.K.; visualization, H.K.; supervision, D.S.; project administration, X.C.; funding acquisition, D.S. All authors have read and agreed to the published version of the manuscript.

Data Availability Statement

Not applicable.

Conflicts of Interest

The authors declare no conflict of interest.

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Figures and Tables

View Image - Figure 1. A visual representation of results from top ten deep learning methods on six datasets. The rows are showing the results produced by different algorithms, whereas the columns are showing datasets.

Figure 1. A visual representation of results from top ten deep learning methods on six datasets. The rows are showing the results produced by different algorithms, whereas the columns are showing datasets.

View Image - Figure 2. A visual representation of results from top ten classical methods on six datasets. The rows are showing the results produced by different algorithms, whereas the columns are showing datasets.

Figure 2. A visual representation of results from top ten classical methods on six datasets. The rows are showing the results produced by different algorithms, whereas the columns are showing datasets.

View Image - Figure 3. Different IQA metrics are used to rank the enhancement methods. Rank values range from 1 to 31. A rank value of 1 indicates the highest performance based on a particular IAQ method, and a rank value of 1 indicates the worst performance. The average rank is shown in red.

Figure 3. Different IQA metrics are used to rank the enhancement methods. Rank values range from 1 to 31. A rank value of 1 indicates the highest performance based on a particular IAQ method, and a rank value of 1 indicates the worst performance. The average rank is shown in red.

View Image - Figure 4. Avg. ranking versus Time is shown for each enhancement method. Only the methods take less than 1 s on CPU (Intel(R) Core(TM) i7-6700 CPU @ 3.40 GHz 3.41 GHz) with 16 GB RAM to process the image of size [Forumla omitted. See PDF.] is shown in the figure. Red dots represent non-Retinex methods, while blue dots represent Retinex methods.

Figure 4. Avg. ranking versus Time is shown for each enhancement method. Only the methods take less than 1 s on CPU (Intel(R) Core(TM) i7-6700 CPU @ 3.40 GHz 3.41 GHz) with 16 GB RAM to process the image of size [Forumla omitted. See PDF.] is shown in the figure. Red dots represent non-Retinex methods, while blue dots represent Retinex methods.

View Image - Figure 5. Avg. ranking versus Time is shown for each enhancement method. Only the methods take less than 0.5 s on GPU (NVIDIA Titan Xp GPU) to process the image of size [Forumla omitted. See PDF.] is shown in the figure. Red dots represent non-Retinex methods, while blue dots represent Retinex methods.

Figure 5. Avg. ranking versus Time is shown for each enhancement method. Only the methods take less than 0.5 s on GPU (NVIDIA Titan Xp GPU) to process the image of size [Forumla omitted. See PDF.] is shown in the figure. Red dots represent non-Retinex methods, while blue dots represent Retinex methods.

View Image - Figure 6. Each test dataset has been ranked based on its difficulty. Rank values range from 1 to 9. A lower rank indicates less difficulty, a higher rank indicates more difficulty.

Figure 6. Each test dataset has been ranked based on its difficulty. Rank values range from 1 to 9. A lower rank indicates less difficulty, a higher rank indicates more difficulty.

Table 1

Quantitative comparison of enhancement algorithms on nine test datasets using LOE metric. A lower value of the LOE metric indicates better performance. The first, second, and third best scores are highlighted with red, blue, and green colors, respectively.

	Datasets	LIME	LOL	DICM	VV	MEF	NPE	LSRW	SLL	ExDark	Average
Methods		LIME	LOL	DICM	VV	MEF	NPE	LSRW	SLL	ExDark	Average
Non-Retinex Methods	HE [89]	290.280	423.910	283.980	280.750	406.930	184.590	122.84	753.990	408.76	358.222
	DHE [27]	7.663	22.227	75.608	21.013	7.852	23.974	13.930	10.177	138.049	35.610
	BPDHE [68]	6.960	125.046	14.936	4.110	5.480	7.643	5.985	382.146	134.774	76.342
	CVC [90]	99.386	286.840	135.324	91.217	97.464	131.478	124.946	324.260	189.896	164.534
	CLAHE [91]	183.094	397.432	386.183	209.867	224.280	379.588	242.572	504.013	252.236	308.807
	AGCWD [29]	10.075	0.1325	57.482	14.777	6.046	31.432	1.463	6.132	137.990	31.932
	IAGC [92]	63.028	170.190	53.502	55.943	66.710	41.488	77.123	278.054	165.790	113.600
	BIMEF [93]	136.898	141.159	239.271	102.891	155.616	225.588	117.777	480.848	237.563	212.589
	MBLLEN [71]	122.188	302.577	176.580	79.013	131.243	123.871	168.128	484.809	190.384	207.076
	GLADNet [72]	123.603	349.720	285.239	145.034	199.632	203.488	204.887	518.189	262.524	254.702
	DLN [81]	132.594	264.065	404.673	325.572	189.831	-	176.527	528.411	212.723	-
	Zero-DCE [80]	135.032	209.426	340.803	145.435	164.262	312.392	219.127	539.673	315.084	280.775
	Exposure Correction [94]	242.461	438.420	362.552	220.876	275.476	314.833	288.659	588.132	307.881	349.604
	StableLLVE [95]	134.130	267.686	476.374	192.262	198.069	394.811	179.101	344.573	248.400	287.660
	LightenNet [96]	681.834	387.204	772.380	328.510	896.201	714.390	930.978	924.638	636.000	698.788
	White-box [97]	90.876	125.682	195.516	124.115	96.704	120.687	84.279	370.972	135.606	156.695
	LLFlow [38]	365.530	367.153	563.765	300.058	430.534	538.078	685.344	764.261	445.274	511.808
Retinex-based Methods	LIME [21]	559.618	404.114	818.660	460.440	618.480	870.215	434.485	1103.98	575.987	649.553
	NPE [50]	300.505	317.399	264.604	352.294	344.953	257.010	435.676	293.158	358.018	327.889
	JieP [58]	249.137	314.798	287.305	137.026	292.798	305.435	216.597	690.829	345.754	323.818
	PM-SIRE [49]	113.631	73.558	152.779	113.031	166.640	104.945	143.945	189.09	193.194	142.148
	WV-SRIE [20]	106.308	83.806	162.224	69.480	210.261	155.683	131.724	236.846	220.823	158.856
	MSRCR [19]	842.029	1450.95	1185.11	1280.68	973.893	1252.07	893.216	1211.11	676.415	1115.43
	CRM [59]	271.652	21.818	450.102	174.751	285.250	534.275	119.712	619.537	352.672	314.419
	EFF [98]	136.898	141.159	239.271	102.891	155.616	255.588	117.777	480.848	237.563	207.512
	pmea [99]	491.663	725.647	477.792	318.569	679.002	610.183	418.046	1005.66	529.189	595.511
	RetinexNet [22]	472.189	770.105	636.160	391.745	708.250	838.310	591.278	950.895	548.905	679.456
	KinD [36]	214.893	434.595	261.771	134.844	275.474	241.221	379.899	479.139	308.869	303.412
	RetinexDIP [64]	767.042	1084.35	852.782	396.417	926.948	1099.39	572.429	1283.77	633.489	856.197
	RRDNet [25]	72.917	21.438	261.429	168.601	100.735	-	136.011	380.747	1.100	-
	KinD++ [60]	573.877	720.025	493.882	258.744	629.841	-	727.695	555.363	484.989	-
	IBA [100]	14.657	0.1616	445.574	169.714	12.823	364.810	137.727	21.758	284.333	179.613
	Self-supervised Network [24]	241.639	322.628	737.847	282.273	311.342	581.691	261.280	467.892	333.842	412.349
	TBEFN [23]	289.754	464.947	617.100	271.871	419.666	527.675	386.583	859.878	389.558	492.160
	Average	178.196	342.070	387.311	227.201	313.656	378.930	286.698	548.053	320.401	-

Table 2

Quantitative comparison of enhancement algorithms on nine test datasets using NIQE metric. A lower value of the NIQE metric indicates better performance. The first, second, and third best scores are highlighted with red, blue, and green colors, respectively.

	Datasets	LIME	LOL	DICM	VV	MEF	NPE	LSRW	SLL	ExDark	Average
Methods		LIME	LOL	DICM	VV	MEF	NPE	LSRW	SLL	ExDark	Average
Non-Retinex Methods	Input	4.357	6.748	4.274	3.524	4.263	3.717	5.391	5.358	5.128	4.800
	HE [89]	3.884	8.413	3.850	2.662	3.870	3.535	3.963	6.438	4.752	4.685
	DHE [27]	3.914	8.987	3.780	2.648	3.518	3.510	3.626	6.292	4.518	4.610
	BPDHE [68]	3.827	NaN	3.786	2.857	3.902	3.531	3.935	NaN	4.727	-
	CVC [90]	4.029	8.014	3.823	2.692	3.636	3.498	4.127	5.828	4.662	4.535
	CLAHE [91]	3.907	7.268	3.792	2.784	3.606	3.461	4.581	5.756	4.734	4.490
	AGCWD [29]	4.032	7.528	3.868	2.970	3.629	3.544	3.733	5.660	4.582	4.434
	IAGC [92]	3.951	7.418	4.015	3.012	3.652	3.598	3.963	5.740	4.557	4.494
	BIMEF [93]	3.859	7.515	3.845	2.807	3.329	3.540	3.879	5.747	4.514	4.397
	MBLLEN [71]	4.513	4.357	4.230	4.179	4.739	3.948	4.722	3.979	4.478	4.329
	GLADNet [72]	4.128	6.475	3.681	2.790	3.360	3.522	3.397	5.066	3.767	4.009
	DLN [81]	4.341	4.883	3.789	3.228	4.022	-	4.419	4.376	4.415	-
	Zero-DCE [80]	3.769	7.767	3.567	3.216	3.283	3.582	3.720	5.998	3.917	4.381
	Exposure Correction [94]	4.215	7.886	3.588	3.078	4.456	3.414	3.820	4.942	4.357	4.443
	StableLLVE [95]	4.234	4.372	4.061	3.420	3.924	3.486	4.367	4.185	4.053	3.984
	LightenNet [96]	3.731	7.323	3.539	2.995	3.350	3.407	3.583	5.453	4.025	4.209
	White-box [97]	4.598	7.819	4.630	3.558	4.622	4.004	4.314	7.138	5.534	5.202
	LLFlow [38]	3.956	5.445	3.765	3.026	3.441	3.498	3.564	4.722	4.094	3.944
Retinex-based Methods	LIME [21]	4.109	8.129	3.860	2.494	3.576	3.658	3.655	6.372	4.588	4.542
	NPE [50]	3.578	8.158	3.736	2.471	3.337	3.426	3.576	5.771	4.220	4.337
	JieP [58]	3.719	6.872	3.678	2.765	3.390	3.522	4.015	5.622	4.215	4.260
	PM-SIRE [49]	4.050	7.506	3.978	3.010	3.450	3.531	3.984	5.435	4.383	4.410
	WV-SRIE [20]	3.786	7.286	3.898	2.849	3.474	3.450	3.826	5.453	4.241	4.310
	MSRCR [19]	3.939	8.006	3.948	2.814	3.688	3.780	3.872	5.574	4.904	4.573
	CRM [59]	3.854	7.686	3.801	2.617	3.264	3.562	3.721	6.008	4.525	4.391
	EFF [98]	3.859	7.515	3.845	2.807	3.329	3.540	3.879	5.747	4.514	4.390
	pmea [99]	3.843	8.281	3.836	2.573	3.431	3.598	3.694	6.237	4.296	4.493
	RetinexNet [22]	4.597	8.879	4.415	2.695	4.410	4.464	4.150	7.573	4.551	5.142
	KinD [36]	4.763	4.709	4.150	3.026	3.876	3.557	3.543	4.450	4.340	3.956
	RetinexDIP [64]	3.735	7.096	3.705	2.496	3.245	3.638	4.081	5.8828	4.234	4.297
	RRDNet [25]	3.936	7.436	3.637	2.814	3.508	-	4.126	5.524	4.010	-
	KinD++ [60]	4.385	4.616	3.804	2.660	3.738	-	3.354	5.090	4.343	-
	IBA [100]	4.062	7.884	3.723	3.310	3.536	3.630	3.728	5.837	4.273	4.490
	Self-supervised Network [24]	4.819	3.753	4.717	3.548	4.351	4.602	4.061	5.400	4.048	4.310
	TBEFN [23]	3.954	3.436	3.503	2.884	3.227	3.292	3.478	4.648	3.621	3.511
	Average	3.935	6.728	3.889	2.956	3.698	3.626	3.933	5.409	4.403	-

Table 3

Quantitative comparison of enhancement algorithms on nine test datasets using entropy [86] metric. A higher value of the entropy metric indicates better performance. The first, second, and third best scores are highlighted with red, blue, and green colors, respectively.

	Datasets	LIME	LOL	DICM	VV	MEF	NPE	LSRW	SLL	ExDark	Average
Methods		LIME	LOL	DICM	VV	MEF	NPE	LSRW	SLL	ExDark	Average
Non-Retinex Methods	Input	6.148	4.915	6.686	6.715	6.075	7.017	5.415	5.616	5.744	6.023
	HE [89]	7.342	7.184	7.221	7.383	7.118	7.756	6.874	6.662	6.708	7.113
	DHE [27]	7.097	6.749	7.141	7.225	6.913	7.512	6.531	6.741	6.613	6.930
	BPDHE [68]	6.610	5.932	6.968	6.977	6.420	7.348	6.260	5.191	6.188	6.413
	CVC [90]	6.875	6.409	7.055	7.216	6.755	7.402	6.318	6.549	6.465	6.772
	CLAHE [91]	6.764	5.679	7.088	7.056	6.583	7.408	6.033	6.591	6.302	6.595
	AGCWD [29]	6.792	6.415	6.925	7.021	6.648	7.398	6.394	6.278	6.248	6.666
	IAGC [92]	6.991	6.247	7.015	7.193	6.878	7.351	6.318	6.698	6.554	6.782
	BIMEF [93]	7.006	6.145	7.029	7.243	6.898	7.311	6.516	6.452	6.464	6.760
	MBLLEN [71]	7.164	7.303	7.255	7.333	7.081	7.386	7.236	7.197	7.132	7.240
	GLADNet [72]	7.502	7.356	7.404	7.447	7.408	7.452	7.393	7.581	7.250	7.412
	DLN [81]	7.121	7.277	7.250	7.535	7.255	-	7.202	7.576	7.129	-
	Zero-DCE [80]	7.166	6.531	7.224	7.572	7.093	7.402	7.035	6.545	6.932	7.042
	Exposure Correction [94]	7.112	7.244	7.256	6.962	6.955	7.531	7.039	7.247	6.907	7.142
	StableLLVE [95]	7.227	6.625	7.010	7.385	7.241	7.042	6.846	7.439	7.129	7.090
	LightenNet [96]	7.234	6.119	7.263	7.411	7.308	7.398	7.599	6.130	6.688	6.990
	White-box [97]	5.984	5.925	6.051	5.475	5.391	7.380	6.352	5.460	5.275	5.914
	LLFlow [38]	7.468	7.462	7.425	7.565	7.366	7.564	7.343	7.304	7.125	7.394
Retinex-based Methods	LIME [21]	7.315	7.129	6.946	7.395	7.139	7.332	7.279	6.418	6.582	7.031
	NPE [50]	7.368	6.971	7.208	7.550	7.405	7.446	7.318	6.418	6.772	7.139
	JieP [58]	7.087	6.443	7.218	7.457	7.104	7.427	6.794	6.473	6.631	6.943
	PM-SIRE [49]	7.006	6.322	7.084	7.309	6.894	7.404	6.696	6.325	6.441	6.812
	WV-SRIE [20]	6.999	6.348	7.088	7.401	6.942	7.386	6.663	6.190	6.463	6.812
	MSRCR [19]	6.563	6.841	6.677	6.957	6.455	6.762	6.895	5.936	6.319	6.605
	CRM [59]	6.487	4.971	6.640	6.559	6.203	7.026	5.494	6.068	5.921	6.115
	EFF [98]	7.006	6.145	7.029	7.243	6.898	7.311	6.516	6.452	6.464	6.760
	pmea [99]	7.284	6.824	7.220	7.479	7.273	7.449	7.074	6.638	6.725	7.088
	RetinexNet [22]	7.489	7.233	7.413	7.575	7.448	7.463	7.243	7.385	7.273	7.379
	KinD [36]	7.388	7.017	7.211	7.498	7.328	7.435	7.209	7.408	6.905	7.251
	RetinexDIP [64]	6.974	5.375	7.214	7.557	6.661	7.381	6.352	6.213	6.668	6.678
	RRDNet [25]	6.646	5.457	7.142	7.275	6.453	-	6.775	6.077	6.426	-
	KinD++ [60]	7.486	7.065	7.332	7.627	7.463	-	7.316	7.452	7.034	-
	IBA [100]	5.905	4.913	6.826	7.255	5.749	7.035	7.146	5.465	6.971	6.420
	Self-supervised Network [24]	7.497	7.404	6.675	7.298	7.469	6.997	7.397	7.484	7.296	7.253
	TBEFN [23]	7.436	6.875	7.328	7.507	7.383	7.366	7.047	7.519	7.313	7.292
	Average	7.000	6.481	7.072	7.247	6.904	7.340	6.798	6.605	6.659	-

Table 4

Quantitative comparison of enhancement algorithms on nine test datasets using BRISQUE metric. A lower value of the BRISQUE metric indicates better performance. The first, second, and third best scores are highlighted with red, blue, and green colors, respectively.

	Datasets	LIME	LOL	DICM	VV	MEF	NPE	LSRW	SLL	ExDark	Average
Methods		LIME	LOL	DICM	VV	MEF	NPE	LSRW	SLL	ExDark	Average
Non-Retinex Methods	Input	25.142	21.929	28.115	29.380	29.066	26.673	32.726	25.304	34.015	28.401
	HE [89]	21.411	39.559	25.359	18.937	25.313	25.444	28.219	40.015	29.034	28.985
	DHE [27]	22.336	37.866	25.993	24.380	21.466	27.008	26.477	38.248	28.951	28.719
	BPDHE [68]	21.728	NaN	25.0972	25.183	22.345	26.425	25.129	NaN	27.417	-
	CVC [90]	22.589	27.101	24.620	21.766	19.285	25.693	26.808	29.007	26.979	25.126
	CLAHE [91]	23.274	29.463	24.248	23.480	22.701	25.368	29.570	31.579	28.543	26.825
	AGCWD [29]	21.964	28.421	24.725	23.961	19.420	26.4117	23.367	29.740	26.161	25.276
	IAGC [92]	24.314	24.058	27.026	26.617	21.843	26.044	23.854	32.813	27.429	26.211
	BIMEF [93]	23.135	27.651	26.811	22.542	20.220	25.504	24.077	34.982	27.910	26.174
	MBLLEN [71]	30.386	23.078	31.603	35.076	32.389	29.423	30.328	22.103	29.012	29.127
	GLADNet [72]	22.286	26.073	26.253	24.068	22.908	24.969	22.802	33.754	24.765	25.657
	DLN [81]	27.715	28.985	26.914	29.782	28.378	-	33.597	26.798	31.187	-
	Zero-DCE [80]	23.334	30.305	30.653	30.786	25.484	30.159	25.827	36.572	26.761	29.568
	Exposure Correction [94]	27.483	28.357	29.847	31.694	29.597	26.768	26.391	28.632	32.520	29.204
	StableLLVE [95]	28.885	32.194	28.150	28.295	28.475	25.662	30.563	25.850	27.749	28.367
	LightenNet [96]	19.523	28.062	28.791	23.502	21.469	27.667	25.144	28.055	25.924	26.077
	White-box [97]	28.807	31.721	33.212	35.733	33.599	26.671	25.081	39.450	37.429	32.862
	LLFlow [38]	22.856	29.709	25.072	23.157	25.673	25.392	22.011	28.041	26.133	25.649
Retinex-based Methods	LIME [21]	23.572	33.973	27.137	25.394	25.158	28.576	27.658	35.829	28.704	28.986
	NPE [50]	22.506	33.858	25.493	24.654	22.320	24.986	27.195	33.861	28.452	27.539
	JieP [58]	22.193	27.087	23.633	22.941	21.214	25.498	23.421	30.207	25.309	24.914
	PM-SIRE [49]	24.659	27.694	27.597	24.287	24.321	27.342	25.345	30.014	26.676	26.635
	WV-SRIE [20]	24.181	27.611	27.698	24.434	22.088	25.760	24.700	28.281	26.750	25.894
	MSRCR [19]	19.384	30.345	25.799	19.282	19.091	24.189	25.789	30.300	25.415	24.957
	CRM [59]	23.477	29.599	26.601	22.368	20.716	25.726	24.396	37.723	28.733	26.939
	EFF [98]	23.135	27.651	26.811	22.542	20.220	25.504	24.077	34.982	27.910	26.174
	pmea [99]	21.390	32.913	25.832	24.972	21.756	26.358	25.358	38.132	28.321	27.874
	RetinexNet [22]	26.101	39.586	26.656	22.459	26.036	29.086	29.021	41.506	30.170	30.565
	KinD [36]	26.773	26.645	30.696	28.887	30.438	27.753	26.763	30.539	29.256	28.872
	RetinexDIP [64]	21.723	19.679	25.199	25.338	23.605	26.671	25.081	32.618	32.175	26.296
	RRDNet [25]	24.499	26.834	29.621	23.396	17.750	-	27.100	29.205	27.606	-
	KinD++ [60]	20.025	25.086	27.852	28.164	30.024	-	26.973	34.978	31.775	-
	IBA [100]	24.336	31.117	32.103	34.646	23.748	29.933	25.826	32.537	26.639	29.569
	Self-supervised Network [24]	30.192	19.768	29.529	30.183	28.355	29.159	26.205	32.016	27.990	27.901
	TBEFN [23]	25.720	17.346	23.606	23.651	24.435	24.0355	22.929	30.676	25.064	23.968
	Average	23.009	27.752	27.267	25.841	24.312	26.621	26.280	31.267	28.425	-

Table 5

Computational time of classical methods in terms of seconds on CPU is reported. The red, blue, and green colors are used to indicate the best, second best, and third best performance, respectively.

	Image Size	400 × 600 × 3	640 × 960 × 3	2304 × 1728 × 3	2848 × 4256 × 3	Avg.
Methods		400 × 600 × 3	640 × 960 × 3	2304 × 1728 × 3	2848 × 4256 × 3	Avg.
Non-Retinex Methods	HE [89]	0.00079	0.0014	0.0071	0.0203	0.00742
	DHE [27]	23.590	59.625	409.628	1253.897	436.685
	BPDHE [68]	0.078	0.338	1.630	3.318	1.341
	CVC [90]	0.086	0.230	1.150	3.533	1.250
	CLAHE [91]	0.00033	0.00099	0.0058	0.0226	0.00743
	AGCWD [29]	0.031	0.053	0.344	1.079	0.377
	IAGC [92]	0.038	0.155	1.025	2.253	0.867
	BIMEF [93]	0.123	0.359	1.811	5.101	1.848
	Exposure Correction [94]	0.721	0.778	0.903	18.501	5.226
	LightenNet [96]	3.091	7.126	45.990	137.835	48.510
	LLFlow [38]	24.740	60.022	363.281	1403.92	462.991
Retinex-based Methods	LIME [21]	0.090	0.296	1.506	4.650	1.635
	NPE [50]	13.061	31.025	213.168	648.832	226.522
	JieP [58]	0.646	0.874	2.307	6.597	2.606
	PM-SIRE [49]	0.402	1.340	28.948	28.423	14.778
	WV-SRIE [20]	0.915	3.136	40.701	182.267	56.755
	MSRCR [19]	0.322	0.704	2.787	8.531	3.086
	CRM [59]	0.166	0.436	2.626	8.134	2.840
	EFF [98]	0.136	0.407	1.973	5.422	1.984
	pmea [99]	0.646	0.874	2.307	6.597	2.606
	IBA [100]	0.032	0.0829	0.512	1.385	0.503

Table 6

The computation time (seconds) and number of parameters (millions) for deep learning-based methods on GPUs (NVIDIA TITAN Xp) are reported. The red, blue, and green colors are used to indicate the best, second best, and third best performance, respectively.

	Image Size	400 × 600 × 3	640 × 960 × 3	2304 × 1728 × 3	2848 × 4256 × 3	Avg.	Parameters.
Methods		400 × 600 × 3	640 × 960 × 3	2304 × 1728 × 3	2848 × 4256 × 3	Avg.	Parameters.
Non-Retinex	StableLLVE [95]	0.0047	0.005	0.0076	0.097	0.028	4.310 M
	MBLLEN [71]	0.240	0.327	1.601	8.133	2.575	0.450 M
	GLADNet [72]	0.147	0.161	0.676	2.772	0.939	0.930 M
	White-box [97]	6.040	6.483	9.833	15.200	9.389	8.560 M
	DLN [81]	0.009	0.015	0.058	0.197	0.070	0.700 M
	Zero-DCE [80]	0.0025	0.0026	0.021	0.043	0.017	0.079 M
Retinex	RetinexNet [22]	0.155	0.162	0.591	1.289	0.549	0.440 M
	KinD [36]	0.334	0.604	3.539	5.213	2.423	0.255 M
	RetinexDIP [64]	33.924	37.015	63.443	112.545	61.732	0.707 M
	RRDNet [25]	59.479	128.217	893.0	3003.5	1021.1	0.128 M
	KinD++ [60]	0.337	0.857	5.408	19.746	6.587	8.275 M
	Self-supervised Net [24]	0.022	0.054	0.366	1.212	0.414	0.485 M
	TBEFN [23]	0.171	0.166	0.550	0.887	0.444	0.490 M

References

1. Wang, J.; Wang, W.; Wang, R.; Gao, W. CSPS: An adaptive pooling method for image classification. IEEE Trans. Multimed.; 2016; 18, pp. 1000-1010. [DOI: https://dx.doi.org/10.1109/TMM.2016.2544099]

2. Zhao, Q.; Sheng, T.; Wang, Y.; Tang, Z.; Chen, Y.; Cai, L.; Ling, H. M2det: A single-shot object detector based on multi-level feature pyramid network. Proceedings of the AAAI Conference on Artificial Intelligence; Atlanta, GA, USA, 8–12 October 2019; Volume 33, pp. 9259-9266.

3. Rezatofighi, H.; Tsoi, N.; Gwak, J.; Sadeghian, A.; Reid, I.; Savarese, S. Generalized intersection over union: A metric and a loss for bounding box regression. Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition; Long Beach, CA, USA, 15–20 June 2019; pp. 658-666.

4. Bertinetto, L.; Valmadre, J.; Henriques, J.F.; Vedaldi, A.; Torr, P.H. Fully-convolutional siamese networks for object tracking. Proceedings of the European Conference on Computer Vision; Munich, Germany, 8–14 September 2016; Springer: Berlin/Heidelberg, Germany, 2016; pp. 850-865.

5. He, A.; Luo, C.; Tian, X.; Zeng, W. A twofold siamese network for real-time object tracking. Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition; Salt Lake City, UT, USA, 18–22 June 2018; pp. 4834-4843.

6. Luo, W.; Sun, P.; Zhong, F.; Liu, W.; Zhang, T.; Wang, Y. End-to-end active object tracking via reinforcement learning. Proceedings of the International Conference on Machine Learning, PMLR; Stockholm, Sweden, 10–15 July 2018; pp. 3286-3295.

7. Ristani, E.; Tomasi, C. Features for multi-target multi-camera tracking and re-identification. Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition; Salt Lake City, UT, USA, 18–23 June 2018; pp. 6036-6046.

8. Saini, M.; Wang, X.; Atrey, P.K.; Kankanhalli, M. Adaptive workload equalization in multi-camera surveillance systems. IEEE Trans. Multimed.; 2012; 14, pp. 555-562. [DOI: https://dx.doi.org/10.1109/TMM.2012.2186957]

9. Feng, W.; Ji, D.; Wang, Y.; Chang, S.; Ren, H.; Gan, W. Challenges on large scale surveillance video analysis. Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition Workshops; Salt Lake City, UT, USA, 18–23 June 2018; pp. 69-76.

10. Ko, S.; Yu, S.; Kang, W.; Park, C.; Lee, S.; Paik, J. Artifact-free low-light video enhancement using temporal similarity and guide map. IEEE Trans. Ind. Electron.; 2017; 64, pp. 6392-6401. [DOI: https://dx.doi.org/10.1109/TIE.2017.2682034]

11. Rasheed, M.T.; Shi, D. LSR: Lightening super-resolution deep network for low-light image enhancement. Neurocomputing; 2022; 505, pp. 263-275. [DOI: https://dx.doi.org/10.1016/j.neucom.2022.07.058]

12. Khan, H.; Wang, X.; Liu, H. Handling missing data through deep convolutional neural network. Inf. Sci.; 2022; 595, pp. 278-293. [DOI: https://dx.doi.org/10.1016/j.ins.2022.02.051]

13. Khan, H.; Wang, X.; Liu, H. Missing value imputation through shorter interval selection driven by Fuzzy C-Means clustering. Comput. Electr. Eng.; 2021; 93, 107230. [DOI: https://dx.doi.org/10.1016/j.compeleceng.2021.107230]

14. Khan, H.; Liu, H.; Liu, C. Missing label imputation through inception-based semi-supervised ensemble learning. Adv. Comput. Intell.; 2022; 2, pp. 1-11. [DOI: https://dx.doi.org/10.1007/s43674-021-00015-7]

15. Ellrod, G.P. Advances in the detection and analysis of fog at night using GOES multispectral infrared imagery. Weather. Forecast.; 1995; 10, pp. 606-619. [DOI: https://dx.doi.org/10.1175/1520-0434(1995)010<0606:AITDAA>2.0.CO;2]

16. Negru, M.; Nedevschi, S.; Peter, R.I. Exponential contrast restoration in fog conditions for driving assistance. IEEE Trans. Intell. Transp. Syst.; 2015; 16, pp. 2257-2268. [DOI: https://dx.doi.org/10.1109/TITS.2015.2405013]

17. Land, E.H. The retinex theory of color vision. Sci. Am.; 1977; 237, pp. 108-129. [DOI: https://dx.doi.org/10.1038/scientificamerican1277-108]

18. Jobson, D.J.; Rahman, Z.U.; Woodell, G.A. Properties and performance of a center/surround retinex. IEEE Trans. Image Process.; 1997; 6, pp. 451-462. [DOI: https://dx.doi.org/10.1109/83.557356] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/18282940]

19. Jobson, D.J.; Rahman, Z.U.; Woodell, G.A. A multiscale retinex for bridging the gap between color images and the human observation of scenes. IEEE Trans. Image Process.; 1997; 6, pp. 965-976. [DOI: https://dx.doi.org/10.1109/83.597272] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/18282987]

20. Fu, X.; Zeng, D.; Huang, Y.; Zhang, X.P.; Ding, X. A weighted variational model for simultaneous reflectance and illumination estimation. Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition; Las Vegas, NV, USA, 26 June–1 July 2016; pp. 2782-2790.

21. Guo, X.; Li, Y.; Ling, H. LIME: Low-light image enhancement via illumination map estimation. IEEE Trans. Image Process.; 2016; 26, pp. 982-993. [DOI: https://dx.doi.org/10.1109/TIP.2016.2639450] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/28113318]

22. Wei, C.; Wang, W.; Yang, W.; Liu, J. Deep retinex decomposition for low-light enhancement. arXiv; 2018; arXiv: 1808.04560

23. Lu, K.; Zhang, L. TBEFN: A two-branch exposure-fusion network for low-light image enhancement. IEEE Trans. Multimed.; 2020; 23, pp. 4093-4105. [DOI: https://dx.doi.org/10.1109/TMM.2020.3037526]

24. Zhang, Y.; Di, X.; Zhang, B.; Li, Q.; Yan, S.; Wang, C. Self-supervised Low Light Image Enhancement and Denoising. arXiv; 2021; arXiv: 2103.00832

25. Zhu, A.; Zhang, L.; Shen, Y.; Ma, Y.; Zhao, S.; Zhou, Y. Zero-shot restoration of underexposed images via robust retinex decomposition. Proceedings of the 2020 IEEE International Conference on Multimedia and Expo (ICME); London, UK, 6–10 July 2020; pp. 1-6.

26. Gonzalez, R.C. Digital Image Processing; 2nd ed. Addison-Wesley: Boston, MA, USA, 1992.

27. Abdullah-Al-Wadud, M.; Kabir, M.H.; Dewan, M.A.A.; Chae, O. A dynamic histogram equalization for image contrast enhancement. IEEE Trans. Consum. Electron.; 2007; 53, pp. 593-600. [DOI: https://dx.doi.org/10.1109/TCE.2007.381734]

28. Rahman, S.; Rahman, M.M.; Abdullah-Al-Wadud, M.; Al-Quaderi, G.D.; Shoyaib, M. An adaptive gamma correction for image enhancement. EURASIP J. Image Video Process; 2016; 35, 2016. [DOI: https://dx.doi.org/10.1186/s13640-016-0138-1]

29. Huang, S.C.; Cheng, F.C.; Chiu, Y.S. Efficient contrast enhancement using adaptive gamma correction with weighting distribution. IEEE Trans. Image Process.; 2012; 22, pp. 1032-1041. [DOI: https://dx.doi.org/10.1109/TIP.2012.2226047]

30. Wang, Z.G.; Liang, Z.H.; Liu, C.L. A real-time image processor with combining dynamic contrast ratio enhancement and inverse gamma correction for PDP. Displays; 2009; 30, pp. 133-139. [DOI: https://dx.doi.org/10.1016/j.displa.2009.03.006]

31. Lore, K.G.; Akintayo, A.; Sarkar, S. LLNet: A deep autoencoder approach to natural low-light image enhancement. Pattern Recognit.; 2017; 61, pp. 650-662. [DOI: https://dx.doi.org/10.1016/j.patcog.2016.06.008]

32. Chen, C.; Chen, Q.; Xu, J.; Koltun, V. Learning to see in the dark. Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition; Salt Lake City, UT, USA, 18–23 June 2018; pp. 3291-3300.

33. Cai, J.; Gu, S.; Zhang, L. Learning a deep single image contrast enhancer from multi-exposure images. IEEE Trans. Image Process.; 2018; 27, pp. 2049-2062. [DOI: https://dx.doi.org/10.1109/TIP.2018.2794218] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/29994747]

34. Jia, X.; Zhu, C.; Li, M.; Tang, W.; Zhou, W. LLVIP: A Visible-infrared Paired Dataset for Low-light Vision. Proceedings of the IEEE/CVF International Conference on Computer Vision; Montreal, QC, Canada, 10–17 October 2021; pp. 3496-3504.

35. Park, J.; Lee, J.Y.; Yoo, D.; Kweon, I.S. Distort-and-recover: Color enhancement using deep reinforcement learning. Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition; Salt Lake City, UT, USA, 18–23 June 2018; pp. 5928-5936.

36. Zhang, Y.; Zhang, J.; Guo, X. Kindling the darkness: A practical low-light image enhancer. Proceedings of the 27th ACM International Conference on Multimedia; Nice, France, 21–25 October 2019; pp. 1632-1640.

37. Zheng, C.; Shi, D.; Shi, W. Adaptive Unfolding Total Variation Network for Low-Light Image Enhancement. Proceedings of the IEEE/CVF International Conference on Computer Vision; Montreal, QC, Canada, 10–17 October 2021; pp. 4439-4448.

38. Wang, Y.; Wan, R.; Yang, W.; Li, H.; Chau, L.P.; Kot, A.C. Low-Light Image Enhancement with Normalizing Flow. arXiv; 2021; arXiv: 2109.05923[DOI: https://dx.doi.org/10.1609/aaai.v36i3.20162]

39. Wang, W.; Wu, X.; Yuan, X.; Gao, Z. An experiment-based review of low-light image enhancement methods. IEEE Access; 2020; 8, pp. 87884-87917. [DOI: https://dx.doi.org/10.1109/ACCESS.2020.2992749]

40. Qi, Y.; Yang, Z.; Sun, W.; Lou, M.; Lian, J.; Zhao, W.; Deng, X.; Ma, Y. A Comprehensive Overview of Image Enhancement Techniques. Arch. Comput. Methods Eng.; 2021; 29, pp. 583-607. [DOI: https://dx.doi.org/10.1007/s11831-021-09587-6]

41. Li, C.; Guo, C.; Han, L.H.; Jiang, J.; Cheng, M.M.; Gu, J.; Loy, C.C. Low-light image and video enhancement using deep learning: A survey. IEEE Trans. Pattern Anal. Mach. Intell.; 2021; 1. [DOI: https://dx.doi.org/10.1109/TPAMI.2021.3126387]

42. Land, E.H.; McCann, J.J. Lightness and retinex theory. Josa; 1971; 61, pp. 1-11. [DOI: https://dx.doi.org/10.1364/JOSA.61.000001]

43. Land, E.H. Recent advances in retinex theory and some implications for cortical computations: Color vision and the natural image. Proc. Natl. Acad. Sci. USA; 1983; 80, 5163. [DOI: https://dx.doi.org/10.1073/pnas.80.16.5163]

44. Provenzi, E.; De Carli, L.; Rizzi, A.; Marini, D. Mathematical definition and analysis of the Retinex algorithm. JOSA A; 2005; 22, pp. 2613-2621. [DOI: https://dx.doi.org/10.1364/JOSAA.22.002613]

45. Marini, D.; Rizzi, A. A computational approach to color adaptation effects. Image Vis. Comput.; 2000; 18, pp. 1005-1014. [DOI: https://dx.doi.org/10.1016/S0262-8856(00)00037-8]

46. Land, E.H. An alternative technique for the computation of the designator in the retinex theory of color vision. Proc. Natl. Acad. Sci. USA; 1986; 83, pp. 3078-3080. [DOI: https://dx.doi.org/10.1073/pnas.83.10.3078] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/3458165]

47. Cooper, T.J.; Baqai, F.A. Analysis and extensions of the Frankle-McCann Retinex algorithm. J. Electron. Imaging; 2004; 13, pp. 85-92. [DOI: https://dx.doi.org/10.1117/1.1636182]

48. Provenzi, E.; Fierro, M.; Rizzi, A.; De Carli, L.; Gadia, D.; Marini, D. Random spray Retinex: A new Retinex implementation to investigate the local properties of the model. IEEE Trans. Image Process.; 2006; 16, pp. 162-171. [DOI: https://dx.doi.org/10.1109/TIP.2006.884946] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/17283775]

49. Fu, X.; Liao, Y.; Zeng, D.; Huang, Y.; Zhang, X.P.; Ding, X. A probabilistic method for image enhancement with simultaneous illumination and reflectance estimation. IEEE Trans. Image Process.; 2015; 24, pp. 4965-4977. [DOI: https://dx.doi.org/10.1109/TIP.2015.2474701] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/26336125]

50. Wang, S.; Zheng, J.; Hu, H.M.; Li, B. Naturalness preserved enhancement algorithm for non-uniform illumination images. IEEE Trans. Image Process.; 2013; 22, pp. 3538-3548. [DOI: https://dx.doi.org/10.1109/TIP.2013.2261309] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/23661319]

51. Zosso, D.; Tran, G.; Osher, S.J. Non-Local Retinex—A Unifying Framework and Beyond. SIAM J. Imaging Sci.; 2015; 8, pp. 787-826. [DOI: https://dx.doi.org/10.1137/140972664]

52. Kimmel, R.; Elad, M.; Shaked, D.; Keshet, R.; Sobel, I. A variational framework for retinex. Int. J. Comput. Vis.; 2003; 52, pp. 7-23. [DOI: https://dx.doi.org/10.1023/A:1022314423998]

53. Ma, W.; Osher, S. A TV Bregman iterative model of Retinex theory. Inverse Probl. Imaging; 2012; 6, 697. [DOI: https://dx.doi.org/10.3934/ipi.2012.6.697]

54. Ma, W.; Morel, J.M.; Osher, S.; Chien, A. An L 1-based variational model for Retinex theory and its application to medical images. Proceedings of the CVPR; Colorado Springs, CO, USA, 20–25 June 2011; pp. 153-160.

55. Fu, X.; Zeng, D.; Huang, Y.; Ding, X.; Zhang, X.P. A variational framework for single low light image enhancement using bright channel prior. Proceedings of the 2013 IEEE Global Conference on Signal and Information Processing; Austin, TX, USA, 3–5 December 2013; pp. 1085-1088.

56. Ng, M.K.; Wang, W. A total variation model for Retinex. SIAM J. Imaging Sci.; 2011; 4, pp. 345-365. [DOI: https://dx.doi.org/10.1137/100806588]

57. Fu, X.; Zeng, D.; Huang, Y.; Liao, Y.; Ding, X.; Paisley, J. A fusion-based enhancing method for weakly illuminated images. Signal Process.; 2016; 129, pp. 82-96. [DOI: https://dx.doi.org/10.1016/j.sigpro.2016.05.031]

58. Cai, B.; Xu, X.; Guo, K.; Jia, K.; Hu, B.; Tao, D. A joint intrinsic-extrinsic prior model for retinex. Proceedings of the IEEE International Conference on Computer Vision; Venice, Italy, 22–29 October 2017; pp. 4000-4009.

59. Ying, Z.; Li, G.; Ren, Y.; Wang, R.; Wang, W. A new low-light image enhancement algorithm using camera response model. Proceedings of the IEEE International Conference on Computer Vision Workshops; Venice, Italy, 22–29 October 2017; pp. 3015-3022.

60. Zhang, Y.; Guo, X.; Ma, J.; Liu, W.; Zhang, J. Beyond brightening low-light images. Int. J. Comput. Vis.; 2021; 129, pp. 1013-1037. [DOI: https://dx.doi.org/10.1007/s11263-020-01407-x]

61. Hai, J.; Xuan, Z.; Yang, R.; Hao, Y.; Zou, F.; Lin, F.; Han, S. R2RNet: Low-light Image Enhancement via Real-low to Real-normal Network. arXiv; 2021; arXiv: 2106.14501

62. Liu, R.; Ma, L.; Zhang, J.; Fan, X.; Luo, Z. Retinex-inspired unrolling with cooperative prior architecture search for low-light image enhancement. Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition; Nashville, TN, USA, 20–25 June 2021; pp. 10561-10570.

63. Wang, R.; Xu, X.; Fu, C.W.; Lu, J.; Yu, B.; Jia, J. Seeing Dynamic Scene in the Dark: A High-Quality Video Dataset With Mechatronic Alignment. Proceedings of the IEEE/CVF International Conference on Computer Vision; Montreal, QC, Canada, 10–17 October 2021; pp. 9700-9709.

64. Zhao, Z.; Xiong, B.; Wang, L.; Ou, Q.; Yu, L.; Kuang, F. RetinexDIP: A Unified Deep Framework for Low-light Image Enhancement. IEEE Trans. Circuits Syst. Video Technol.; 2021; 32, pp. 1076-1088. [DOI: https://dx.doi.org/10.1109/TCSVT.2021.3073371]

65. Yu, R.; Liu, W.; Zhang, Y.; Qu, Z.; Zhao, D.; Zhang, B. Deepexposure: Learning to expose photos with asynchronously reinforced adversarial learning. Proceedings of the 32nd International Conference on Neural Information Processing Systems; Montreal, QC, Canada, 3–8 December 2018; pp. 2153-2163.

66. Cheng, H.; Shi, X. A simple and effective histogram equalization approach to image enhancement. Digit. Signal Process.; 2004; 14, pp. 158-170. [DOI: https://dx.doi.org/10.1016/j.dsp.2003.07.002]

67. Kim, Y.T. Contrast enhancement using brightness preserving bi-histogram equalization. IEEE Trans. Consum. Electron.; 1997; 43, pp. 1-8.

68. Ibrahim, H.; Kong, N.S.P. Brightness preserving dynamic histogram equalization for image contrast enhancement. IEEE Trans. Consum. Electron.; 2007; 53, pp. 1752-1758. [DOI: https://dx.doi.org/10.1109/TCE.2007.4429280]

69. Guan, X.; Jian, S.; Hongda, P.; Zhiguo, Z.; Haibin, G. An image enhancement method based on gamma correction. Proceedings of the 2009 Second International Symposium on Computational Intelligence and Design; Changsha, China, 12–14 December 2009; Volume 1, pp. 60-63.

70. Tao, L.; Zhu, C.; Xiang, G.; Li, Y.; Jia, H.; Xie, X. LLCNN: A convolutional neural network for low-light image enhancement. Proceedings of the 2017 IEEE Visual Communications and Image Processing (VCIP); St. Petersburg, FL, USA, 10–13 December 2017; pp. 1-4.

71. Lv, F.; Lu, F.; Wu, J.; Lim, C. MBLLEN: Low-Light Image/Video Enhancement Using CNNs. Proceedings of the BMVC; Newcastle, UK, 3–6 September 2018; 220.

72. Wang, W.; Wei, C.; Yang, W.; Liu, J. GLADNet: Low-light enhancement network with global awareness. Proceedings of the 2018 13th IEEE International Conference on Automatic Face & Gesture Recognition (FG 2018); Jodhpur, India, 15–18 December 2018; pp. 751-755.

73. Jiang, Y.; Gong, X.; Liu, D.; Cheng, Y.; Fang, C.; Shen, X.; Yang, J.; Zhou, P.; Wang, Z. Enlightengan: Deep light enhancement without paired supervision. IEEE Trans. Image Process.; 2021; 30, pp. 2340-2349. [DOI: https://dx.doi.org/10.1109/TIP.2021.3051462]

74. Xiong, W.; Liu, D.; Shen, X.; Fang, C.; Luo, J. Unsupervised real-world low-light image enhancement with decoupled networks. arXiv; 2020; arXiv: 2005.02818

75. Xia, Z.; Gharbi, M.; Perazzi, F.; Sunkavalli, K.; Chakrabarti, A. Deep Denoising of Flash and No-Flash Pairs for Photography in Low-Light Environments. Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition; Nashville, TN, USA, 20–25 June 2021; pp. 2063-2072.

76. Le, H.A.; Kakadiaris, I.A. SeLENet: A semi-supervised low light face enhancement method for mobile face unlock. Proceedings of the 2019 International Conference on Biometrics (ICB); Crete, Greece, 4–7 June 2019; pp. 1-8.

77. Yang, W.; Wang, S.; Fang, Y.; Wang, Y.; Liu, J. From fidelity to perceptual quality: A semi-supervised approach for low-light image enhancement. Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition; Seattle, WA, USA, 13–19 June 2020; pp. 3063-3072.

78. Qiao, Z.; Xu, W.; Sun, L.; Qiu, S.; Guo, H. Deep Semi-Supervised Learning for Low-Light Image Enhancement. Proceedings of the 2021 14th International Congress on Image and Signal Processing, BioMedical Engineering and Informatics (CISP-BMEI); Online 23–25 October 2021; pp. 1-6.

79. Wu, W.; Wang, W.; Jiang, K.; Xu, X.; Hu, R. Self-Supervised Learning on A Lightweight Low-Light Image Enhancement Model with Curve Refinement. Proceedings of the ICASSP 2022–2022 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP); Singapore, 22–27 May 2022; pp. 1890-1894.

80. Guo, C.G.; Li, C.; Guo, J.; Loy, C.C.; Hou, J.; Kwong, S.; Cong, R. Zero-reference deep curve estimation for low-light image enhancement. Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition (CVPR); Seattle, WA, USA, 13–19 June 2020; pp. 1780-1789.

81. Wang, L.W.; Liu, Z.S.; Siu, W.C.; Lun, D.P. Lightening network for low-light image enhancement. IEEE Trans. Image Process.; 2020; 29, pp. 7984-7996. [DOI: https://dx.doi.org/10.1109/TIP.2020.3008396]

82. Lee, C.; Lee, C.; Kim, C.S. Contrast enhancement based on layered difference representation of 2D histograms. IEEE Trans. Image Process.; 2013; 22, pp. 5372-5384. [DOI: https://dx.doi.org/10.1109/TIP.2013.2284059]

83. Ma, K.; Zeng, K.; Wang, Z. Perceptual quality assessment for multi-exposure image fusion. IEEE Trans. Image Process.; 2015; 24, pp. 3345-3356. [DOI: https://dx.doi.org/10.1109/TIP.2015.2442920] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/26068317]

84. Lv, F.; Li, Y.; Lu, F. Attention guided low-light image enhancement with a large scale low-light simulation dataset. arXiv; 2019; arXiv: 1908.00682[DOI: https://dx.doi.org/10.1007/s11263-021-01466-8]

85. Loh, Y.P.; Chan, C.S. Getting to know low-light images with the exclusively dark dataset. Comput. Vis. Image Underst.; 2019; 178, pp. 30-42. [DOI: https://dx.doi.org/10.1016/j.cviu.2018.10.010]

86. Gonzalez, R.C. Digital Image Processing; Pearson Education India: Noida, India, 2009.

87. Mittal, A.; Moorthy, A.K.; Bovik, A.C. No-reference image quality assessment in the spatial domain. IEEE Trans. Image Process.; 2012; 21, pp. 4695-4708. [DOI: https://dx.doi.org/10.1109/TIP.2012.2214050] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/22910118]

88. Mittal, A.; Soundararajan, R.; Bovik, A.C. Making a “completely blind” image quality analyzer. IEEE Signal Process. Lett.; 2012; 20, pp. 209-212. [DOI: https://dx.doi.org/10.1109/LSP.2012.2227726]

89. Papasaika-Hanusch, H. Digital image PROCESSING Using Matlab; Institute of Geodesy and Photogrammetry, ETH Zurich: Zurich, Switzerland, 1967; Volume 63.

90. Celik, T.; Tjahjadi, T. Contextual and variational contrast enhancement. IEEE Trans. Image Process.; 2011; 20, pp. 3431-3441. [DOI: https://dx.doi.org/10.1109/TIP.2011.2157513]

91. Pizer, S.M. Contrast-limited adaptive histogram equalization: Speed and effectiveness stephen m. pizer, r. eugene johnston, james p. ericksen, bonnie c. yankaskas, keith e. muller medical image display research group. Proceedings of the First Conference on Visualization in Biomedical Computing; Atlanta, GA, USA, 22–25 May 1990; Volume 337.

92. Cao, G.; Huang, L.; Tian, H.; Huang, X.; Wang, Y.; Zhi, R. Contrast enhancement of brightness-distorted images by improved adaptive gamma correction. Comput. Electr. Eng.; 2018; 66, pp. 569-582. [DOI: https://dx.doi.org/10.1016/j.compeleceng.2017.09.012]

93. Ying, Z.; Li, G.; Gao, W. A bio-inspired multi-exposure fusion framework for low-light image enhancement. arXiv; 2017; arXiv: 1711.00591

94. Afifi, M.; Derpanis, K.G.; Ommer, B.; Brown, M.S. Learning Multi-Scale Photo Exposure Correction. Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition; Nashville, TN, USA, 20–25 June 2021; pp. 9157-9167.

95. Zhang, F.; Li, Y.; You, S.; Fu, Y. Learning Temporal Consistency for Low Light Video Enhancement From Single Images. Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR); Nashville, TN, USA, 20–25 June 2021; pp. 4967-4976.

96. Li, C.; Guo, J.; Porikli, F.; Pang, Y. LightenNet: A convolutional neural network for weakly illuminated image enhancement. Pattern Recognit. Lett.; 2018; 104, pp. 15-22. [DOI: https://dx.doi.org/10.1016/j.patrec.2018.01.010]

97. Hu, Y.; He, H.; Xu, C.; Wang, B.; Lin, S. Exposure: A white-box photo post-processing framework. ACM Trans. Graph. (TOG); 2018; 37, pp. 1-17. [DOI: https://dx.doi.org/10.1145/3181974]

98. Ying, Z.; Li, G.; Ren, Y.; Wang, R.; Wang, W. A new image contrast enhancement algorithm using exposure fusion framework. Proceedings of the International Conference on Computer Analysis of Images and Patterns; Ystad, Sweden, 22–24 August 2017; Springer: Berlin/Heidelberg, Germany, 2017; pp. 36-46.

99. Pu, T.; Wang, S. Perceptually motivated enhancement method for non-uniformly illuminated images. IET Comput. Vis.; 2018; 12, pp. 424-433. [DOI: https://dx.doi.org/10.1049/iet-cvi.2017.0259]

100. Al-Ameen, Z. Nighttime image enhancement using a new illumination boost algorithm. IET Image Process.; 2019; 13, pp. 1314-1320. [DOI: https://dx.doi.org/10.1049/iet-ipr.2018.6585]

101. Everingham, M.; Van Gool, L.; Williams, C.K.; Winn, J.; Zisserman, A. The pascal visual object classes (voc) challenge. Int. J. Comput. Vis.; 2010; 88, pp. 303-338. [DOI: https://dx.doi.org/10.1007/s11263-009-0275-4]

Word count: 13188

Show less

© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.

Abstract

Translate

A key part of interpreting, visualizing, and monitoring the surface conditions of remote-sensing images is enhancing the quality of low-light images. It aims to produce higher contrast, noise-suppressed, and better quality images from the low-light version. Recently, Retinex theory-based enhancement methods have gained a lot of attention because of their robustness. In this study, Retinex-based low-light enhancement methods are compared to other state-of-the-art low-light enhancement methods to determine their generalization ability and computational costs. Different commonly used test datasets covering different content and lighting conditions are used to compare the robustness of Retinex-based methods and other low-light enhancement techniques. Different evaluation metrics are used to compare the results, and an average ranking system is suggested to rank the enhancement methods.

Details

Title

An Empirical Study on Retinex Methods for Low-Light Image Enhancement

Author

Muhammad Tahir Rasheed¹

; Guo, Guiyu¹; Shi, Daming¹; Khan, Hufsa¹

; Cheng, Xiaochun²

¹ College of Computer Science and Software Engineering, Shenzhen University, Shenzhen 518060, China
² Computer Science Department, Middlesex University, Hendon, London NW4 4BT, UK

First page

4608

Publication year

2022

Publication date

2022

Publisher

MDPI AG

e-ISSN

20724292

Source type

Scholarly Journal

Language of publication

English

DOI

https://doi.org/10.3390/rs14184608

ProQuest document ID

2716581885

An Empirical Study on Retinex Methods for Low-Light Image Enhancement

Jump to:

Full Text

Abstract

Details

Suggested sources