1. Introduction
Antibiotics are natural, semi-synthetic or synthetic molecules with the ability to kill or stop the growth of various types of microorganisms, being used as antimicrobial agents. Since the accidental discovery of penicillin in 1928 by Sir Alexander Flemming, many other antibiotics belonging to different classes (e.g., tetracyclines, sulfonamides, amphenicols, aminoglycosides, β-lactams, etc.) have been determined based on their chemical structure or action mechanisms. They have been produced and have brought improvement to the clinical field [1] due to their employment in the treatment of bacterial infectious diseases in humans, animals and even plants [2]. However, the increased use of antibiotics, sometimes uncontrolled, has resulted in the malfunction of organs, damage of nervous, renal or blood systems and in the enhanced development of antibiotic resistance. Therefore, personalized antibiotherapy is highly recommended and this can be realized by TDM, applying point-of-care testing, which can be easily performed with specific biosensors. A microfluidic electrochemical biosensor was described for monitoring the β-lactam antibiotics levels in different biological matrices (whole blood, plasma, urine, saliva and exhaled breath condensate) [3]. Some veterinary antibiotics have not only been used for prophylactic or treatment purposes, but they have also been gradually added to feed in order to improve the growth rate of livestock and poultry, and thus, can accumulate in agricultural and husbandry products, which are consumed by humans (e.g., meat, eggs, milk, honey and fish) [2,4]. Antibiotics are excreted from organisms into the environment either as the parent drug or as its metabolites. Other ways by which antibiotics enter into the waterways and ecosystems are aquaculture medication and industrial wastewaters [5]. Because they are non-biodegradable and possess low water solubility, they accumulate and remain in the environment as persistent contaminants, becoming hazardous for human health and ecosystems [2]. Considering all of these features, it is obvious that the continuous development of cheap, fast and reliable sensors and methods that allow for the detection and quantification of antibiotics from different matrices is necessary. This fact is emphasized by the already existing reviews regarding antibiotics analysis using electrochemical sensors [6], with some of them being focused on a given class of antibiotics like amphenicols [7] or aminoglycosides [8,9], or on various types of modifiers like graphene [5,10], MIPs [1], nanomaterials [11,12], metal organic frameworks [2] or fluorescent sensors based on luminescent metal-organic frameworks [13]. Two recent reviews focused on biosensors relying on various biorecognition elements and nanomaterials applied to antibiotic detection in food matrices [4,14].
The importance of biosensing technology in the development of either new antibiotics or various carriers for their delivery must be considered. Examples of biosensors with various detection modes applied for drug discovery and analysis, in high throughput screening, real-time and online monitoring of (bio)chemical processes for pharmaceutical production and quality control of the final products, were discussed by Finny, Cheng and Andreescu [15].
Over the years, rifamycins has proved to be an important antibiotic class, indispensable in TB therapy, with RIF being the first-line medication in the treatment of this worldwide spread, often lethal disease. Despite the fact that there have been several reviews regarding antibiotics analysis, these do not address rifamycins. Further to their therapeutic importance, rifamycins have disadvantages, so the administrated dose must be controlled and optimized to minimize risks and to not be dangerous for either the ecosystem or for human beings. All of these aspects demonstrate the importance of various types of (bio)sensors and analytical methods development, thus allowing the sensitive and selective detection of these compounds, especially of RIF. Desai and Sash, in 2015, published a review discussing spectrophotometric, spectrofluorimetric and chromatographic methods reported between 1997 and 2014 for RIF determination [16]. Thapliyal et al. [17] provided an overview of the papers published from 2006 to 2015 regarding the electrochemical methods devised for the detection of antitubercular drugs. The evolution of analytical separation (high performance and ultra-high performance liquid chromatography, thin layer chromatography, capillary electrophoresis) and spectroscopic techniques (UV, NIR, FTIR, Raman) associated with a chemometric approach for the simultaneous determination of RIF, ISN, PYR and ETB in fixed-dose combination anti-tuberculosis pharmaceutical formulations was discussed by Oliveira et al. [18]. In 2019, Farokhi-Fard et al. [19] mentioned RIF and ISN electroanalysis at bare electrodes and offered a more detailed discussion on different nanomaterial electrode modifiers. In the most recent review regarding instrumental analytical methods reported for RIF quantification dates from 2021, around 70% of the paper referred to chromatographic and hyphenated techniques, and briefly discussed spectrometric techniques, among others [20]. As will be highlighted in this review, our recent literature survey revealed that there is also a huge interest in the electrochemical (bio)sensors and methods for RIF analysis. However, recent information regarding this issue has not been exhaustively collected and summarized over the last few years. The present work offers an overview and critically discusses the literature data reported from 2000 to today on the development of various electrochemical (voltammetric, amperometric, potentiometric and photoelectrochemical), optical (UV-Vis and IR) and luminescence (chemiluminescence and fluorescence) methods, as well as the corresponding (bio)sensors for the analysis of rifamycin antibiotics, with emphasis on RIF, in pharmaceutical formulations, biological fluids and environmental samples. Some recent findings in RIF delivery systems are concisely presented together with the analytical procedures employed for in vitro RIF release monitoring during their preparation. Understanding the interaction between drugs and other species that may exist in the human body allows for an understanding of drug pharmacokinetics, their mode of action and the conditions in which their efficiency can be improved. Therefore, a special section of this review is dedicated to the electrochemical and spectrometric investigations of RIF interaction with biologically important molecules.
2. Rifamycins—Properties and Clinical Treatment
Rifamycins are natural or semisynthetic macrocyclic antibacterial agents active against a large variety of organisms, including bacteria and eukaryotes [21]. They belong to the ansamycin family, the name of which originates from the Latin word “ansa”, meaning “handle”, and is due to their basket-like molecular architecture [22,23] (Figure 1). It is interesting to note that the name “rifamycin” refers to the popular French noir crime film from 1955, Rififi [24]. The compounds of this class have an “ansa structure”, constituted by a core formed from condensed naphthalene and furan rings [25] and a highly substituted aliphatic chain connecting the two nonadjacent positions of the naphtohydroquinone ring [21,26,27], which is also the chromophore responsible for their red-orange color [28,29]. The molecular structures of the various rifamycins differ by the type and the position of the substituents on the aromatic ring; the most common representatives of this antibiotic class are shown in Figure 1 [26,30]. These molecules have different functional groups (e.g., −OH in both the aliphatic bridge and on the aromatic rings, amine, amide, furanone, methoxy and acetyl) [31], thus being generated chiral centers that make the compounds optically active [26]. The presence of the hydroxyl groups confers them with antioxidant properties and makes them adequate for radicalic polymerization reactions [29].
A mixture of rifamycins A, B, C, D and E was first obtained in 1957 from a strain called, at that time, Streptomyces mediterranei, known today as Amycolatopsis rifamycinica. Rifamycins are unstable during the purification process, except for inactive rifamycin B, which is rapidly oxidized and hydrolyzed into the active rifamycin S. Chemical modification of rifamycin S generated RSV, the first ansamycin clinically used and one of the most important representative drugs of this class, in addition to RIF [32]. The rifamycins group also includes rifapentine (less employed due to its hepatotoxicity), rifabutin (applied as treatment for patients who do not tolerate RIF) [33], rifamide (limited to intravenous use), rifalazil (treats persistent chlamydia infections) and rifaximin (used for the prevention of travelers’ diarrhea) [32].
The most important representative of rifamycins is the hydrazone of a rifamycin B derivative with N-amino-N’-methylpiperazine [24], namely (3-[(4-methyl-1-piperazinyl) imino] methyl rifamycin, called rifampicin (RIF) (Figure 1). It is a semi-synthetic ansamycin, chemically derived from the natural rifamycin B via rifamycin S and RSV, respectively [32,34]. RIF, also known as rifaldazine or rifampin, or under various commercial names like Rifadin, Rimactan, Rifoldine, etc. [35], was discovered in 1965 [19] and approved for clinical use by the United States Food and Drug Administration in 1971 [24].
RIF is an odorless red crystalline powder. It is hydrophobic and very slightly soluble in water, acetone, alcohol and ether, and it is soluble in methanol and ethyl acetate, and easily soluble in chloroform [36,37]. Based on its reduced, pH-dependent water solubility (2.50 mg/mL at 25 °C) and highly permeability, RIF is classified as a Class II drug, according to the Biopharmaceutics Classification System [38,39]. RIF presents seven crystalline forms. The metastable polymorph II is used in commercialized pharmaceutical preparations because it has the highest water solubility [39].
From a chemical point of view, RIF is a hydroquinone derivative bearing three phenolic −OH groups, which can be chemically or electrochemically oxidized [40]. Due to the acidic hydroxyl group from position 4 of the aromatic structure (pKa1 = 1.70) and of the basic 3-piperazine nitrogen (pKa2 = 7.90), RIF exhibits an amphoteric character and, depending on the pH, it can exist as a zwitterion [19]. RIF is unstable and its degradation depends on the pH, temperature and storage period. In acidic medium, it is hydrolyzed to 3-formyl-RSV and 1-amino-4-methylpiperazine, and, in alkaline conditions, it autoxidized, the main degradation product being the inactive RIF quinone [41].
RIF is a broad spectrum antibiotic with effective action against Gram-positive and some Gram-negative bacterial strains [25,30,41,42,43]. The hydroxyl groups of RIF form hydrogen bonds with amino acid residues of the bacterial DNA-dependent RNA polymerase, resulting in a stable drug-enzyme complex, inhibiting the initiation of RNA synthesis and stopping bacterial growth [28,44].
RIF was clinically introduced to fight TB [45] and it is presently still the main medicine used to prevent or treat this ailment [33], which is considered to be in the top ten of the world’s fatal diseases and a leading cause of death in HIV patients [39] (in 2021 there were 1.6 million deaths from TB, with 187,000 of these among HIV-positive patients). The WHO Global Tuberculosis Report 2022 [46] estimated that, in 2021, the worldwide number of new TB cases (10.6 million) increased by 4.5% in comparison to 2020. Without treatment, the death rate of TB is about 50%. RIF is the most powerful first-line anti-TB drug, characterized as a highly effective, orally administered and non-toxic compound, as part of the combined therapy approach recommended by the WHO [23]. RIF has an effectiveness of about 95% in cases of TB caused by susceptible strains [47], with a daily oral administration of the standard 600 mg single dose [24,48] or of a dose corresponding to 10–20 mg RIF/kg body weight [49,50]. Alone or in combination with other drugs, it represents the main treatment for infections (produced by various microorganisms), such as TB (Mycobacteria tuberculosis), osteomyelitis (Staphylococcus aureus), meningococcal disease (Neisseria meningitidis), leprosy (Mycobacterium leprae), gonorrhea (Neisseria gonorrhoeae) [51], Legionnaire’s disease (Legionella pneumophila) [19,28] and even HIV [52,53]. Under regulated dosage, RIF is also recommended against methicillin-resistant Staphylococcus aureus [19], to treat cholestatic pruritus and infections associated with prosthetic joints [54], such as chemoprophylaxis of the postoperative endophthalmitis [55], or against Brucellosis and meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae Type b and Neisseria meningitides [19]. It is generally used in combination with other antibiotics in order to prevent bacterial resistance of different microorganisms, to extend its antibacterial activity and, thus, to enhance its effectiveness towards various infections originating from both intracellular and extracellular organisms, as well as to improve acceptability and compliance [28,56]. For example, TB treatments include a two-month intensive therapy with different combinations of the first-line agents RIF, ISN, PYR and ETB, followed by another four months of RIF and ISN administration [57]. It was found that RIF could be applied for wound healing as well [58], and it was also explored to prevent the formation of biofilms [43]. There have been reports emphasizing that RIF has a neuroprotective function [59] and a therapeutic role in neurodegenerative disorders [60,61], including Alzheimer’s disease [62], as well as an ability to increase the accumulation of anticancer drugs in multidrug-resistant cancer cells [63], to cleavage or to bind to DNA [64], which may contribute to RIF anti-cancer activity. It must be mentioned that RIF is not used for the treatment of viral infections, such as colds or flu [28]. On the other hand, it was observed that RIF may significantly reduce the effects of many drugs by increasing their metabolic rate [19].
RIF is usually orally administered and it is rapidly absorbed in the gastrointestinal tract and distributed throughout the body [19,28]. Due to its liposoluble character, RIF easily penetrates into all tissues [57]. It is metabolized in the liver by deacetylation and is excreted in the bile together with its metabolites [65]. In healthy individuals, RIF half-life is around 2–3 h. After 6 h, the drug is completely eliminated from the body [28] through urine (about 30%) and mostly through feces (60–65%). Around 7% of the administered RIF is eliminated intact via urine [19].
Long-term or excess use of RIF may produce some adverse effects, the most important being hepatotoxicity, which causes liver damage leading, for example, to jaundice. Other side effects include fever [66], arthralgia [31], kidney failure [67], fatigue, dizziness, gastrointestinal disorders [68] generating nausea, vomiting, appetite loss, diarrhea, sore throat, headache, immunological [53] and allergic reactions [52]. Moreover, RIF causes orange coloration in urine, sweat and tears [28]. All of these negative aspects can lead to treatment failure and to the occurrence and even prevalence of (multi)-drug-resistant TB [48,69], especially in patients with HIV infection [56,70].
3. Rifamycins Delivery Systems
Rifamycins’ bacterial activity is proportional to its concentration at the target site. RIF has low solubility in water and, in biological fluids, this is an impediment to achieving optimal concentration and limits its bioavailability. Therefore, high doses (450–600 mg per day) of RIF are required for oral administration and prolonged therapy (at least 6 months) damages the liver and also disturbs other biological functions (e.g., renal, gastrointestinal, immunological, etc.). Studies have emphasized that both β-CyD and γ-CyD form inclusion complexes with RIF, thus enhancing drug solubility and the percentage of RIF released in in vitro studies, increasing its efficiency and reducing side effects by lowering the daily dose administrated in the treatment of bacterial infections [71]. Encapsulation of RIF in a carrier reduces the antibiotic adverse reactions and intensifies its therapeutic effect. For example, RIF was encapsulated in round biodegradable poly(betulin disuccinate-co-sebacic acid) microspheres with diameters in the range of 2.00–21.00 µm; 40.00–60.00% of RIF release from these polymeric microspheres was detected in the first 72 h and continued for about 1 month. Therefore, poly(betulin disuccinate-co-sebacic acid) microspheres could be used as RIF delivery systems [72]. Rifamycin S was encapsulated in niosomes prepared by a slightly modified thin film hydration method. The vesicles membrane consists of the surfactant Span® 60 and cholesterol. Results of the minimum inhibitory concentration assay emphasized that the niosomes containing glycerol in the aqueous phase presented higher antibacterial activity [73]. MSNPs encapsulated with RIF were developed as nanocarriers to deliver the antibiotic into macrophages for the treatment of intracellular infections associated with SCV of Staphylococcus aureus [74]. A study regarding the influence of the surface chemistry and size of spherical MSNPs with controllable diameters < 100 nm and pore sizes > 5 nm revealed that 40 nm particles with high silanol groups density presented enhanced cellular uptake and sufficient drug loading, resulting in improved antibacterial efficacy of the encapsulated RIF against SCV of Staphylococcus aureus [75]. Porous biphasic calcium phosphate scaffolds coated with RIF-loaded biopolymers, poly(ε-caprolactone) or poly(ester urea), were developed as antibiotic delivery systems to avoid bacterial (Staphylococcus aureus and Escherichia coli) infections, with possible applications in bone repair [42]. A cefazolin-containing polycaprolactone 3D scaffold encapsulated in a RIF-loaded alginate hydrogel resulted in a dual-drug-releasing scaffold with a 5.00 mm diameter disk-shaped design. This system presented a synergistic effect due to the ability of the external antibiotic, RIF, to inhibit biofilm formation and, of the internal drug, cefazolin, to increase antibacterial activity against Staphylococcus aureus and could be used to amend the treatment of osteomyelitis [76]. RIF-containing polyelectrolyte nanoparticles acting as drug-delivery systems were synthesized in order to protect the drug against the alkaline medium of chronic wounds. The hydrophobic RIF was entrapped in CS modified with a hydrophobic amino acid (alanine or tryptophan). The amphiphilic cores were covered by means of the negatively charged polysaccharide, dextran sulfate, with the positively charged PEI bearing three types of amino groups, which are protonated at physiological and endosomal pH. The electrostatic interactions of the cross-linker dextran sulfate with the positive charged groups of both CS and PEI resulted in stable nanostructures. The study emphasized that these NPs and the antioxidant ascorbic acid have synergistic protective effects, improving the RIF release rate and decreasing its degradation rate in alkaline media (pH 8.40) [41].
Owing to their flexibility and soft nature, microfibers are used for drug delivery applications. In 2021, Sharma et al. [58] described the fabrication of RIF-loaded microfibers by the ionotropic gelation method, starting with the naturally occurring biopolymers sodium alginate and gelatin, to which xanthan gum and nanoclay were added to enhance the mechanical strength of the fibrous structure. These biocomposite microfibers could be used for controlled and prolonged RIF release and as wound dressing material.
Despite its disadvantages, the oral route of RIF administration remains dominant. Nevertheless, other methods of targeted delivery of the drug are being sought, which would increase the bioavailability of the antibiotic and reduce adverse reactions. Pulmonary administration of RIF is one of the alternatives to refine TB therapy due to the rapid onset of the drug action, high RIF concentration in the lungs, lower enzymatic activity, avoidance of hepatotoxicity and fewer systemic side effects. The development of particulate carriers for pulmonary drug delivery would enable controlled drug release and selective drug targeting to the desired location. Inhalable RIF-loaded, nearly spherical polymeric microparticles (Figure 2) with diameters of 2.00 to 4.00 µm and optimum aerodynamic characteristics concerning aerosolization and inhalation were prepared using the spray drying technique from sodium alginate, and aloe vera powder as a matrix former and L-leucine as a spray drying excipient. The drug content of the prepared microparticles varied from 0.24 to 0.39 mg/mg of powder, while the drug association efficiency (between 39.28 and 96.15%) was enhanced by increasing concentrations of both L-leucine and sodium alginate. Dissolution data obtained for these microparticles emphasized that, due to the hydrophobic nature of L-leucine, the in vitro release of RIF significantly decreased with increasing L-leucine concentration in comparison to the formulations with higher sodium alginate concentrations. The retarded dissolution of RIF from these microparticles offered enough time for their phagocytosis by alveolar macrophages, resulting in the elimination of Mtb present within the cells [38].
RIF-loaded polymeric micelles were developed for administration by inhalation of the antibiotic. The commercially available graft copolymer Soluplus® (poly (vinyl caprolactam)-poly(vinyl acetate)-poly(ethylene glycol)) was used, and increased, by 14.30-fold, RIF aqueous solubility and generated nanosized micelles (~107 nm). This inhalable nanosystem was proven to multiply, up to 2.50-fold, in vitro RIF microbicidal efficacy against Mtb in comparison to a RIF solution, and it was shown that the antibiotic accumulated in rat lungs over 24 h [77]. More recently, applying the solvent diffusion method, RIF and curcumin were encapsulated in mannose surface-decorated Soluplus® micelles. After freeze-drying, the drug-loaded polymeric nanomicelles (~108 nm) were stable after dilution in simulated interstitial lung fluid, being suitable for nebulization and drug delivery to the deep lung. The studies revealed that mannose enhanced the microbicidal activity of the inhaled micellar nanoformulation, while curcumin contributed with its anti-inflammatory and potential anti-microbial effects [48].
A mucoadhesive liquid crystal system composed of surfactant (ethoxylated and propoxylated cetyl alcohol), the RIF-containing oil phase consisting of oleylamine, soy phosphatidylcholine or a mixture of 1:1 (m/m) oleylamine / soy phosphatidylcholine and deionized water as the aqueous phase was developed for the nasal, sublingual, and cutaneous routes of RIF administration. The slow-drug release delivery nanostructured system was assessed in preclinical studies on Mtb-infected mice and could be used in TB therapy [47].
A RIF-loaded thermo-sensitive mucoadhesive in situ rectal gel was recently developed in order to improve the antibiotic’s bioavailability and to attenuate its hepatotoxicity. RIF solubility was increased by co-precipitation with PEG 6000 and was then incorporated into the mucoadhesive in situ rectal gel with the optimized composition of 0.10% RIF:PEG (1:1) co-precipitate, 25.00% Pluronics (copolymer of poly(oxyethylene)–poly(oxypropylene)–poly(oxyethylene); i.e., 10.00% of Pluronic F68, 15.00% of Pluronic F127 as a gel base and 1.20% of sodium alginate acting as mucoadhesive polymer [69].
Due to its efficacy in the treatment of bacterial infections, RIF was used in the synthesis of an antibacterial biocomposite polymeric system applied to a prophylactic covering of polypropylene mesh material employed for hernia repair. The coating, consisting of RIF-loaded poly(d,l-lactide-co-glycolide) biodegradable nanoparticles dispersed in CS, gradually released the drug for up to 11 days, being active against Staphylococcus aureus and Staphylococcus epidermidis for at least 14 days. The antibiotic-loaded biopolymer inhibited bacterial adhesion to the mesh material and presented good cell compatibility [78].
4. Rifamycins Detection and Monitoring
Considering RIF concentration-dependent toxicity and possible drug resistance, as well as the differences in the pharmacokinetics and its varied oral bioavailability [74] among different people, the TDM during treatment with RIF is very important. Therefore, reliable RIF quantification in biological samples allows for a trained physician to establish the optimal individualized doses to obtain the most effective treatment with the least adverse reactions [45]. The antibiotic can be detected in human blood serum or urine samples. The RIF therapeutic peak plasma concentration is attained at 2 h after oral administration. Due to RIF variable oral absorption, blood collection for TDM is recommended to be performed at 2 h and 6 h post dose ingestion [79].
The anti-TB treatment very often involves the administration of RIF together with other drugs, like ISN and PYR. Therefore, the selectivity and the sensitivity of analytical methods are compulsory features for simultaneous determination of the drugs in both pharmaceuticals and more complex matrices, like biological samples [18,56,68,69,80,81,82,83,84,85,86,87,88]. RIF bioavailability and, therefore, its therapeutic action can be influenced by its physical or chemical interactions with other molecules (peptides, DNA, drugs, nutrients, etc.). Various electrochemical [23,50,89,90] and spectrometric (optical or luminescence) [30,91,92,93,94] methods have been reported to be applied to investigate such interactions [43,95,96].
RIF is the active principle of several pharmaceuticals, most of them being in solid form because there is a lack of liquid or aqueous RIF pharmaceutical dosage forms due to low water solubility and high chemical instability [48]. However, the pharmaceutical industry has very strict regulations regarding the quality and stability of the products, with methods of analysis being decisive to monitor the composition of both final and intermediary products, throughout the whole fabrication process. In this respect, several simple methods were reported for RIF assessment in pharmaceutical dosage forms to ensure its concentration is within the effective range when administered [97].
RIF can enter into surface waters, groundwater and sediments as a result of leakage from manufacturing and usage processes, or through domestic sewage due to the extraction of intact or metabolized RIF after therapeutic administration. RIF has low water solubility and is environmentally stable, leading to persistent toxicity and distortion in the ecosystems, disruption of the endocrine functions of the aquatic organisms and humans and it causes antibiotic-resistant genes in pathogenic species in fish [37]. Considering the hazard posed by the persistent drugs in the environment, today there is an increasing trend in the development of various materials (green synthesized magnetic Fe3O4 nanoparticles [98], water/dimethylsulfoxide-transcutol/isopropyl alcohol/capmul MCM C8 nanoemulsion [99], graphene hydrogel/M (M:Cu, Co, Ni nanocomposite) as cathode [100], Co3O4 NPs supported on olive stone biochar [101], etc.) and processes (e.g., Fenton reaction, electrochemical process and their combination [102], electrochemical [103], etc.) for RIF removal from various water samples.
4.1. Electrochemical (Bio)Sensors and Methods for Rifamycins Analysis
Rifamycins, in general, and RIF and RSV, in particular, have many functional groups, some of them being electroactive, so that the molecules can be either reduced or oxidized (Figure 3) at proper selected (bio)sensors.
4.1.1. Electroanalytical Methods Based on Rifamycins Electroreduction
RIF cathodic behavior was investigated and exploited in qualitative analysis using mercury electrodes such as DME [70], SMDE [34] and HMDE [25,56,83,104]. RSV quantification by adsorptive stripping voltammetry at HMDE was also reported [105].At mercury electrodes, RIF voltammograms presented two peaks assigned to the irreversible reduction of the azomethine (−C=N−) functional group from the side chain of the 3-[(4-methyl-1-piperazinyl) imino] methyl moiety, which is more easily reducible and generates the more intense signal observed at less negative potentials (~0.95 V at pH ~7.00), and of the carbonyl group (situated at ~1.20 V at pH ~7.00), respectively [34,83].
Few electroanalytical methods based on RIF reduction signals have been reported, and those that have been reported date from the early 2000s. Most of these methods presented relatively narrow linear ranges (from one to maximum three orders of magnitude) and LODs at submicromolar levels, which were lowered to the nanomolar level when adsorptive techniques were applied (Table 1). Today, due to mercury toxicity, this type of electrode is rarely used. However, to mimic the surface of mercury electrodes, a silver wire coated with a Hg film (HgFE/Ag) was used as a renewable working electrode with an adjustable surface area. The RIF peak current obtained by DPV in the same conditions was 2.5 times higher on HgFE/Ag than on HMDE, most probably due to the larger surface area of the HgFE/Ag [55].
4.1.2. (Bio)Sensors and Electroanalytical Methods Applied for Rifamycins Electrooxidation Investigations
RIF and RSV (Figure 1) are hydroquinone derivatives (−OH groups in positions 1 and 4, Figure 1) and possess a third phenolic −OH moiety (position 8), which can be chemically or electrochemically oxidized [40] at various solid bare electrodes (e.g., GCE [85], CPE [80] and the disposable PGE [84]) or modified sensors obtained at various substrates, such as GCE [28,29,32,37,45,52,65,66,67,68,85,90,106,107,108,109,110,111,112,113,114,121], SPE [36,53,115], CPE [21,26,80,88,116,117], ITO [118], Ag [55], Au [50,86] and Pt [119,120]. Most often, the electrodes were employed as sensing devices in voltammetric [26,27,28,31,36,37,45,50,52,53,55,65,66,67,68,80,84,86,88,106,107,108,109,110,111,112,113,116,117,121], potentiometric [21], amperometric [114,119,120] or photoelectrochemical [108,115] analysis of RIF, while some of them have also been applied as detecting systems in high performance liquid chromatography [85].
Studies revealed that, depending on the nature of the sensor’s electroactive surface, RIF can present two [28,53] or three [26,36] oxidation signals (Figure 3). The signal at more anodic potential was irreversible, while the others were reversible [28,53], quasi-reversible [36,52,82,112,116] or even irreversible [67]. The (quasi)reversible couple involved an exchange of two electrons and two protons, and was related to the hydroquinone-quinone system of the 1,4-dihydroxynaphtalene structure [26, 27,28,31,36,52,53,65,82,110,116]. The signal situated at more anodic potential was assigned to the irreversible one electron/one proton oxidation of the piperazynil-imino moiety of RIF [26, 27, 28,53,110] or of the phenolic hydroxyl (position 8) [26,112,116]. RSV CV emphasized the quasi-reversible peak pair corresponding to the hydroquinone-quinone system [26,121] and an irreversible anodic signal at a high potential value attributed to the oxidation of the -OH group from position 8 (Figure 1) [26]. Rifamycin B presented only a single irreversible oxidation peak, as expected for the O-monosubstituted hydroquinone [121].
In order to improve its selectivity and sensitivity, the sensor’s electroactive surface was chemically or electrochemically modified with one or more materials (Table 1), leading to (1) an increased electroactive surface area [52,68] (e.g., the effective surface area of the DyNWs/CPE was approximately eight times larger than that of the bare CPE [116], that of the CoEnQ10/Fe3O4NPs/MWCNTs/GCE was about 3.3 fold as large as that of GCE [67] and bare GCE (0.068 cm2) < MoSe2/GCE (0.102 cm2) < rGO/β-CyD/GCE (0.138 cm2) < MoSe2/rGO/β-CyD/GCE (0.214 cm2) [37]) and (2) faster electron transfer by decreasing the charge transfer resistance [52,68,110,118] (e.g., GCE (368.94 Ω) > GMONRs/GCE (113.39 Ω) [31] or GCE (748.04 Ω) > MoSe2/GCE (354.58 Ω) > rGO/β-CyD/GCE (236.41 Ω) > MoSe2/rGO/β-CyD/GCE (105.02 Ω) [37]).
The simplest way to change the electrode’s surface and thus its performance characteristics, is electroactivation, which can be performed either potentiostatically or potentiodynamically using different supporting electrolytes [122]. A SPBDDE was electrochemically pretreated by CV (five cycles, scan rate 0.100 V/s; potential range 0.000 to 2.000 V) in 0.10 mol/L NaOH, in order to generate hydroxyl radicals at its surface and to increase its reactivity towards RIF, so that a LOQ of 7.30 × 10−13 mol/L was achieved with AdSDPV [36].
For RIF electroanalysis, the literature contains few reports regarding sensors modified with a single material using different simple procedures. RIF oxidation was investigated at in situ electroplated Pb film on Au, boron-doped diamond and GC electrodes. Au could not be used as a substrate because RIF and Pb oxidation signals obtained by SWV were overlapped, so Pb/GCE was selected for further studies [106]. MIPs are often selected as electrode surface modifiers due to their ease of preparation, high stability and their unique tailored molecular recognition properties, which provide the modified sensor with high sensitivity and improved selectivity [1,123]. MWCNTs are widely used as electrode coating material, characterized by low cost, good conductivity, large surface area, extended potential window, low reactivity and mechanical strength [65,67,110]. Metal oxide nanomaterials have gained even more applicability in sensor development due to their large surface-to-volume ratio, excellent electrical and catalytic properties, their low cost and simple preparation methods [65,67]. A mixture of preformed polyphosphazene polymer and RSV [121] or nanomaterials, such as MWCNTS [28], GNPls [108], GMONRs [31] and BiVO4 microspheres [53], were drop-coated on GCE [28,31,108,121] or SPCE [53], and dried at air [28,108,121] or at a given temperature (e.g., 15 °C [31], 50 °C [53]). The preparation procedure of the MI polyphosphazene modified electrode comprised a supplementary step involving the extraction of the template (RSV) from the polymeric membrane by washing with ethanol [121].
HP-β-CyD/CPE [21] and DyNW/CPE [116] were obtained by simply hand mixing the modifier (HP-β-CyD and DyNW, respectively), carbon powder and paraffin oil, and filling the tip of a disposable polyethylene syringe [21] or a polytetrafluoroethylene tube [116] with the corresponding paste. The electrical contact with the carbon paste was realized by a stainless steel [21] or a copper [116] wire. The electrode surface was renewed by squeezing out a small part of the carbon paste from the holder, and the resulted new surface was polished on a special paper until it obtained a shiny aspect [21,116]. By immersing a CPE, for a given period of time, in a stirred solution containing the surfactant at a concentration lower than the critical micellar concentration resulted an in situ surfactant modified CPE. It is worth mentioning that, in this case, the electrode modification did not lead to better RIF or RSV detection sensitivity (Table 1); instead, it allowed the determination of RIF in the presence of RSV using an anionic surfactant (SDS)-modified CPE and of the RSV in the presence of RIF when the CPE was modified with the cationic surfactant CTAC. This can be explained by the electrostatic interaction between the antibiotics and the modified CPE, depending on the charge of the analyte at a given pH, e.g., at pH 2.00 RSV is neutral, while RIF is protonated at the piperazine moiety and, therefore, it is attracted by the negatively charged groups of SDS [26].
The sensor’s performance characteristics are most often much better if their surface is modified with a combination of various materials (e.g., carbon-based nanomaterials, metal oxides, polymers, different organic species, etc.) due to their synergistic effects.
Nanocomposites of MWCNTs with CeO2 NRs [65] (Figure 4), Fe3O4NPs [67], lecithin stabilized SPIONs [111], Mo2C [109] and CoTHPP [110] were used in the development of RIF sensors. To further increase the sensor electrochemical performances for RIF detection, coenzyme Q10 was immobilized by drop-casting at the Fe3O4NPs/MWCNTs/GCE. For the series of stepwise modified sensors, RIF anodic peak currents recorded in the same conditions were GCE (28 µA) < MWCNTs/GCE (75 µA) < Fe3O4NPs/MWCNTs/GCE (150 µA) < CoEnQ10/Fe3O4NPs/MWCNTs/GCE (220 µA) [67].
Graphene and its derivatives (GO and rGO) have also been frequently used as electrode modifiers due to their large surface area, high hydrophilicity and good mechanical strength [19]. For example, the RIF sensors MoSe2/rGO/β-CyD/GCE [37], CuO@rGO/GCE [52], TiO2/rGO/GCE [66] and NiTAPc-GO/ITO [118] were simply obtained by drop-casting a 2:1 ratio of MoSe2:rGO/β-CyD solution, the homogeneous CuO@rGO composite solution, an ethanolic solution of TiO2/rGO and Nafion and a NiTAPc-GO suspension in DMF, respectively, onto the corresponding substrate surface and drying in an oven [37] or at room temperature [52,66,118]. However, covering the substrate surface with different types of modifiers may involve more steps. Ni(OH)2NPs-rGONSs/GCE was prepared by applying a layer-by-layer procedure consisting of drop-coating a GO film onto the GCE, followed by potentiostatic reduction (200 s at −1.200 V in ABS pH 5.00) to rGONSs and the subsequent in situ synthesis of Ni(OH)2 NPs on the rGONSs/GCE through electrochemical reduction (100 s at −1.000 V) of Ni(NO3)2 in ABS pH 5.00. Ten additional CV scans were performed in 0.10 mol/L NaOH solution in order to assure the electro-dissolution and passivation of the Ni(OH)2 film, resulting in the desired modified sensor, which was daily prepared. The GCE modification led to the reduction of the peak potentials and the enhancement of the currents for the RIF two anodic signals (by a factor of 20 and 27, respectively), which were due to the increased surface area of the Ni(OH)2 NPs, the high density edge plane-like defects and oxygen-containing groups of the rGONSs, providing more active sites that favor the RIF adsorption and the electron transfer between the RIF and the electrode [27].
Simple or MI polymeric films are among the preferred modifiers in order to attain better electrochemical characteristics of a sensor, one of the most used being PPy. In their work, Alonso Lomillo et al. [119,120] started the Pt surface modification by covering it with a thin PPy layer electrogenerated by CV. In the subsequent step, the HRP-PPY [119] and β-CyD-PPy [120] films, respectively, were deposited on the PPy/Pt electrode by CV from a Py solution containing the corresponding modifier. LiClO4 was always used as the supporting electrolyte. A layer of PPy containing RIF and ISN as templates was electrodeposited by CV on a GCE previously modified by drop-casting with Cu-MOF/MC mixture and dried under IR radiation. After removing the template molecules by extraction in a methanol/water mixture, the dual MI-modified electrode, MIPPy/Cu-MOF/MC/GCE, which presented for both analytes linear ranges of three orders of magnitude and LODs lower than 1 nmol/L, was used for the simultaneous quantitative determination of RIF and ISN from various matrices [68].
According to the literature, the most sensitive electrochemical determination of RIF was reported to be by AdSSWV using a GCE modified by drop casting with CoFe2O4@CdSe core-shell NPs capped with the biodegradable polymer PVP. The wide linear range of nine orders of magnitude and the very low LOD (see Table 1) and LOQ (1.52 × 10−16 mol/L) values were attributed to the high catalytic effect and the mesoporous structure of the CoFe2O4@CdSe NPs, which provided many active sites for RIF accumulation. On the other hand, RIF concentration at the electrode surface was increased by the strong analyte adsorption via the hydrogen bonds formed between the hydroxyl and amino groups of RIF and the PVP carbonyl groups [112].
4.1.3. (Bio)Sensors and Electroanalytical Methods Applied for Rifamycins Indirect Determination
An interesting procedure for NiHCF/GCE preparation involved more steps, namely: the electrode surface was covered with Ni NPs by drop-coating and the obtained electrode was cycled (3–300 times) in the potential range 0.000 to 1.200 V in a 1.00 × 10−3 mol/L K3[Fe(CN)6] in 0.10 mol/L KCl solution. RIF determination at this electrode was due to the antibiotic interaction with the Ni species from the electrode surface, resulting in a decrease in the NiHCF reduction signal, this variation being proportional to RIF concentration [107].
An enzymatic biosensor was prepared by potentiodynamic electropolymerization of pyrrole in the presence of HRP using a Pt electrode. The function of the HRP/PPy/Pt is based on a “ping-pong” or double-displacement mechanism involving H2O2 and RIF as substrates. The enzymatic reaction, through which RIF is oxidized to the RIF-quinone form, is monitored by measuring the RIF-quinone reduction current, which is proportional to the RIF concentration in solution if the concentration of H2O2 is high enough so that it is not a limiting factor [119].
A nanobiosensor was obtained by the potentiostatic electrodeposition (at 0.700 V) of the EG-CYP2EI onto the Au electrode modified with the PVP-AgNPs/PANSA nanocomposite, due to the electrostatic interactions between the enzymatic system and the oxidized nanocomposite. Considering RIF multiple interactions with the CYP2EI ferri-heme, this biosensor was applied to investigate RIF biotransformation into its carboxylic form, via formylrifampicin. CVs recorded at EG-CYP2E1/PVP-AgNPs/PANSA/Au presented an irreversible cathodic signal at −0.300 V, for which intensity linearly varied with RIF concentration. Due to the fact that RIF peak serum levels are comprised within the linear range of this nanobiosensor, it could be used to detect RIF in serum samples using DPV or amperometry [50]. Another enzymatic biosensor, constructed in a two-step drop-coating process via physical adsorption of CuPPI onto an Au electrode and the subsequent electrostatic attachment of CYP3A4, was developed for detection in aerobic conditions of the four anti-TB drugs PYR, ETB, ISN and RIF. The biosensor reduction peak at −0.080 V, attributed to monooxygenation reaction occurring within the enzyme, linearly increased with the added drug concentration due to the interaction between the antibiotic and the Fe(III) active site of the enzyme. The biosensor had the highest sensitivity for PYR (3000 A × L/mol) and the lowest for RIF (890 A × L/mol), with the corresponding LOQs of 6.80 × 10−11 mol/L PYR and 3.25 × 10−10 mol/L RIF [86].
RIF electrochemical behavior has enabled its use as a mediator in H2O2 reduction. When it was immobilized onto a CoFe2O4@CdSeQDs/GCE, the CVs recorded in blank solution at the resulted CoFe2O4@CdSeQDs/RIF/GCE showed the RIF characteristic pair of redox peaks. In the presence of H2O2, the RIF cathodic peak was augmented, while the anodic one decreased, indicating that H2O2 diffused towards the electrode and oxidized the reduced form of RIF. The linear dependence between the decrease of RIF cathodic peak current and H2O2 concentration enabled the amperometric detection of H2O2 in the concentration range 7.00 × 10−6–1.43 × 10−3 mol/L [124].
4.2. Spectrometric Methods for Rifamycins Analysis
4.2.1. UV-Vis Spectrometric Methods Applied to Rifamycins Analysis
UV-Vis spectrometric methods are routinely used due to their simplicity and the need for less expensive instrumentation. However, their sensitivity and selectivity are not as performant as those of other instrumental methods of analysis.
RIF was determined in the presence of other drugs from combined dosage forms, without any pretreatment step, by UV spectrometric measurements at the wavelengths corresponding to their maximum absorbance, based on the fact that the mixture absorbance is additive at any wavelength [125,126]. On the other hand, some reports described the “zero-crossing” method applied to the first order derivative spectra. In this case, RIF was determined at the zero-crossing point of the other(s) coexisting analyte(s), where it presented a linear ΔA/Δλ = f (C) dependence [126,127]. The Q-AR method was also reported to be applied for the quantification of RIF in the presence of another compound (e.g., piperine [128] and CC-I [129]). This method employs the ratio of absorbancies at the wavelengths’ corresponding to the iso-absorptive point and to the maximum absorption of one of the analytes. Youseff and Mahler [130] created a short mathematical explanation of the basic principles of the DRSZ, DDRD and HDDR methods, and optimized each of them for RIF, PYR and ISN quantification in ternary mixtures without prior separation. Chemometric methods like PLS [131,132], PCR and CLS multivariate calibrations were also reported for RIF determination from mixtures with piperine [133], RSV [131] and ISN [132,134].
An older study worth mentioning reported that when RIF and ISN are present in fixed-dose combinations, they interact and form isonicotinylhydrazone, which has a similar visible spectrum with RIF and its absorptivity is one third of that of RIF, so that colorimetric determination can lead to an overestimation of RIF content with 33% [135].
A RIF assessment from its mixture with ISN and PYR was based on the fact that RIF is soluble in ethyl acetate and not soluble in water, while the solubility of the other two analytes is reversed. Therefore, after extraction in ethyl acetate, RIF was determined by simple absorbance measurements at 334 nm [136]. RIF was quantified from wastewater samples using the standard addition method and the absorbancies measured at 338 nm, after cloud point extraction in the presence of the surfactant Triton X-100 [137]. However, considering the RIF absorption maximum at 474 nm, it was directly determined in the presence of ISN without any interference [138].
There are several methods based on RIF reactions with one or more reagents in order to obtain colored products for which the absorbance is measured, either in the reaction medium, e.g., charge transfer complexes [139,140], or after extraction into a proper solvent [139].
Indirect spectrometric methods were based on RIF reaction with NBS through quantification of the unreacted NBS after treatment with KI and monitoring the released I2 by absorbance measurements at 572 nm [138] or on the Fe(III) reduction by RIF to Fe(II), which was subsequently complexed with ferricyanide to form Prussian blue, for which absorbance was measured at 760 nm [140]. RIF and ISN simultaneous quantification from a mixture were performed by treating the sample with Cu(II) and neocuproine, and applying PLS regression to the spectrometric data recorded at 455 nm. The principle of this determination relies on the ISN ability to reduce Cu(II) in the presence of neocuproine to Cu(I) in the Cu(I)-neocuproine complex, which presented an absorption maximum at 455 nm. In these conditions, the RIF absorption maximum appears at 449 nm and, due to the peaks overlapping, a chemometric approach was necessary to determine the two drugs [132]. Additional details regarding these examples are presented in Table 2.
UV-spectrophotometry also proved to be a reliable method for the investigation of forced RIF degradation under acidic, alkaline, thermal, peroxide and photolytic stress conditions [141], and it was also quite often employed to investigate RIF in vitro release from newly developed drug carriers. UV-Vis spectra recorded at different time intervals for RIF in physiological (pH 7.40) and alkaline (pH 8.50) media in the absence and in the presence of ascorbic acid were exploited to investigate drug degradation and the protective role of the antioxidant. The study revealed that, at both pHs, RIF presented two absorption maxima, at 334 nm and 475 nm, which were almost unchanged during the first 6 h and decreased afterwards due to drug degradation. In the presence of ascorbic acid, the peaks drastically increased after 24 h, indicating the formation of a byproduct affecting the absorbances at the considered wavelengths. The changes in the absorbances at these two wavelengths recorded for RIF-loaded polyelectrolyte NPs were helpful to establish that the drug was gradually released for 24 h, and the release rate remained constant for 48 h [41]. UV-Vis spectrometry based on the RIF absorption maximum at about 330–340 nm was employed to monitor the in vitro antibiotic release from drug-loaded polymeric microparticles [38] or biopolymers coated on biphasic calcium phosphate scaffolds, while the RIF content of the corresponding polymers was assessed after the complete antibiotic dissolution, using the calibration curve method plotted in the concentration range 1.00–100.00 µg/mL in PBS and in DMSO, respectively [42]. The efficiency of RIF entrapment in microfibers [58] and its in vitro release from a dual-drug-based scaffold [76] were evaluated using similar methodologies. In vitro RIF release studies from biodegradable polymer microspheres during defined periods of time (1 h to 1 month) were performed by absorbance measurements in PBS at 470 nm applying the calibration curve method. The identical absorption spectra recorded for fresh solutions of RIF and for RIF released after different times suggested that there was no drug degradation during the encapsulation and release periods [72]. Absorption measurements at the same wavelength were reported to be used for the evaluation of the RIF-PEG 600 co-precipitate solubility in comparison to that of pure RIF and of the physical mixture [69]. The loading capacity and encapsulation efficiency of RIF in MSNPs [74,75], as well as its in vitro release from these nanocarriers, were assessed from UV-Vis measurements at 254 nm in methanol [74].
In methanol-water medium, RIF formed with UO22+ a 1:1 yellow complex, with an absorption maximum at 375 nm. The linear dependence between the complex absorbance at 375 nm and uranyl ion concentration enabled the quantitative determination of UO22+ from soil in the concentration range 1.35–20.25 µg/mL with LOD and LOQ of 0.20 and 0.61 µg/mL, respectively [144].
4.2.2. IR Spectrometric Methods Applied to Rifamycins Analysis
IR spectrometric methods are not commonly used for quantitative determinations. Their main application is related to the fact that IR spectra give useful information regarding the functional groups existing in the molecules, the purity of a material [38], the degradation of a compound or its interaction with other chemical species (e.g., mannose with gelatin [48], RIF incorporated into alginate-gelatin microfibres [58] or RIF with PEG 600 [69] and with CyD [71]) being monitored based on the presence or disappearance of characteristic peaks (e.g., for RIF in the ATR-FTIR spectrum at 3477 cm−1 (−OH), 1728 cm−1 (furanone), 1644 cm−1 (amide near C−O), 1567 cm−1 (C=C), 1490 cm−1 (amide close to C−C) [38]). Comparison of the ATR-FTIR spectra recorded for RIF, the used raw materials (aloe vera, sodium alginate, L-leucine) and the resulted RIF-loaded microparticles confirmed the presence and the integrity of the raw materials during the synthesis process [38]. Similarly, the chemical composition, the functional groups and the interactions in the polyelectrolyte NPs were determined by analyzing the FTIR spectra of the pure individual components (CS, alanine, tryptophan, dextran sulfate and PEI), mixtures of them and of the NPs [41]. Even more, high throughput FTIR in combination with various machine learning algorithms proved to be suitable for the discrimination of the mechanism of action of 14 antibiotics (including RIF) at pathway, class and individual antibiotic levels. Despite the fact that this approach was successful for most of the investigated drugs, the prediction of the RIF mechanism of action was not effective. An explanation was that RIF is a RNA synthesis inhibitor and the used model did not know the metabolic fingerprint of RNA synthesis inhibition [94].
NIR spectroscopy coupled with PLS regression was applied to the simultaneous determination of RIF, ISN and PYR in tablets. The spectral ranges used for the determination were 1981–2195 nm for RIF, 1540–1717 nm and 2086–2197 nm for ISN and 1460–1537 nm, 1956–2022 nm and 2268–2393 nm for PYR [145]. NIR (spectral range 1100–2500 nm) and multivariate calibration by PLS analysis were employed to assess the percentage dissolution of RIF, ISN, PYR and ETB from pharmaceutical preparations [146]. The PLS approach was also used in the Raman spectroscopic simultaneous quantification of these four drugs in fixed-dose combination products [147].
4.3. Rifamycins Analysis Based on Luminescence Sensors and Methods
4.3.1. Fluorescence-Based Sensors and Methods Applied to Rifamycins Analysis
Due to its inherent sensitivity, fluorimetry is often the choice for determinations at trace level. It can be directly applied either in the case of fluorescent analytes, or the species of interest can be determined based on their ability to quench the fluorescence of a fluorophore, as is the case for rifamycins. The fluorescence of various nanomaterials linearly decreased with the addition of increasing RIF concentrations (Figure 5) due to either a dynamic, as was the case for QDs [148,149], or static types of quenching, as in the situation of RIF interaction with HAS [30,92,150], with Cu NCs capped with PEI [151] or with FA [152]. When the UV-Vis spectrum of RIF, acting as a quencher, overlapped with the emission and/or excitation spectrum of the fluorophore, the inner filter effect (e.g., RIF interaction with N-P-CNDs [97], FA-Cu NCs [152], GSH-Cu NCs [153], UCCS NaYF4:Yb, Tm@SiO2 [154]) or the fluorescence resonance energy transfer (when CDs were the fluorophore [155]) might represent the main quenching mechanism. In the case of interactions of different rifamycins with serum albumins, the efficiency of fluorescence quenching is enhanced by the bulkiness of the R2 substituent, and therefore, it decreases in the order RFPT > RIF > RFD > RSV [30,93]. The performance characteristics of the fluorescence sensors reported in the literature for rifamycins determination are presented in Table 3.
Most fluorescence-based methods were employed to quantify RIF in capsules. Nevertheless, there are two interesting applications as a portable point-of-care medical diagnostic platform for RIF detection in urine. The two systems were obtained by immobilization of the BSA-Au NCs on wax-printed chromatography paper [54] and the UCCS NaYF4:Yb, Tm@SiO2 nanocomposite powder on filter paper using double sided sticky tape [154], respectively. Moreover, after its use, the latter system can be recycled and reused five times by simply ultrasonic washing with water. The RIF fluorescence quenching ability was also exploited in biodegradable poly(ethylene oxide) monomethyl ether-poly(ε-caprolactone) block copolymer NPs loaded with RIF containing a FRET sensor. The block copolymer was labeled with coumarin-based fluorescent dyes (C120 and DACCA). The principle of the RIF-based FRET sensor relies on the fact that FRET occurs if the energy donor (the coumarin-based fluorophores) and the energy acceptor (the quencher RIF) are sufficiently close (up to 10 nm) and if there exists significant overlap between the emission spectrum of the fluorophore (λem,C120 = 440 nm; λem,DACCA = 482 nm) and the absorption spectrum of the acceptor (λabs,RIF = 477 nm). The sensor was applied to monitor real-time drug release, both in vitro and in living macrophages, and, in situ, the enzymatic degradation of the NPs in macrophages [156].
4.3.2. Chemiluminescence-Based Sensors and Methods Applied to Rifamycins Analysis
By reason of its highly sensitive detection, wide dynamic ranges and simple instrumentation required, CL is often a good technique to be applied for monitoring chemical reactions or disease diagnosis. It relies on producing light following a chemical reaction which can be enzymatically catalyzed.
Unfortunately, there are few literature reports related to CL determination of RIF. The catalytic decomposition of peroxomonosulfate in the presence of Co2+ ions produces electromagnetic radiation, the intensity of which can be enhanced by the presence of RIF. The linear dependence between the CL intensity of this reaction and RIF concentration was used to develop a FI-CL method. The possible mechanism of CL amplification by RIF involved the oxidation of the RIF hydroxyl groups by the main reactive species produced by the HSO5− /Co2+ system, resulting in an excited oxy-RIF, which returns to the ground state by emission of radiation [49]. In alkaline medium, RIF is degraded to RIF-quinone, which participates in a CL reaction with NBS acting as the oxidant; with the CL intensity depending on the degradation rate. The CL of ISN did not change over time. The different kinetic spectra of the two analytes combined with an artificial neural network calibration enabled simultaneous determination of the two drugs [81]. A CL sensor for RIF analysis was based on the drug’s ability to decrease the B,N-doped CDs enhanced CL intensity of the SO32− − Ce4+ system. This was due to the fact that RIF is easily oxidized and it competes with SO32- and B,N-doped CDs for the Ce4+, so that a lower amount of excited B,N-doped CDs was produced and the CL intensity decreased [44].
On the other hand, ECL couples the advantages of CL and electrochemical analysis, presenting high selectivity, simple in situ preparation and better reagent stability. In this technique, the species are generated at the surface of an electrode and then suffer electron-transfer reactions in order to form excited states that are finished by emitting light when they go back to the ground state. For example, in KH2PO4–Na2B4O7 buffer pH 6.60 - dodecyltrimethylammonium chloride solution, RIF was electrooxidated to a RIF-semiquinone radical intermediate, which was further oxidized by K2S2O8 to an excited state RIF-quinone and returned to the ground state with emission of radiation (460 – 575 nm), thus generating a detectable ECL signal [40].
It was also reported that, in borax buffer, when a potential of 1.200 V was applied to the working electrode, RIF had an amplification effect on luminol ECL signal. Dissolved oxygen and the RIF electrooxidation product were the key species responsible for the enhancement of the luminol ECL signal, which had a maximum intensity at 425 nm and was emitted by the excited state of 3-aminophthalate [157]. Other details regarding these examples are presented in Table 4.
5. Sensors and Analytical Methods for the Investigation of Rifamycins Interaction with Biological Important Molecules
Electrochemical and spectrometric investigations of interactions between a drug and biologically important molecules are of special interest because they help us to understand the drug’s behavior in physiological fluids and to elucidate their pharmacological action mechanism.
CV and SWV studies at HMDE emphasized that the intensity of the anodic and cathodic peaks of rutin decreased and the peak potentials changed in the presence of RIF due to the formation, by electrostatic attraction, of an electroinactive 1:1 supramolecular RIF-rutin complex. These data were supported by results obtained by UV-Vis and FTIR measurements [95]. The same voltammetric techniques explain the formation of 1:1 adducts between RIF and cysteine and gluthatione, respectively, to propose a mechanism for these processes and to calculate the binding constants. The adducts formation was confirmed by FTIR analysis based on the disappearance of the free thiol group stretching band [96].
The interaction of RIF with ds- and thermally denaturated ss-calf thymus DNA was investigated both in solution and at DNA-modified CPE using transfer AdSDPV in ABS pH 5.00 and PBS pH 7.40. The investigation was based on monitoring the intensity of the guanine and adenine anodic peaks in the presence of different RIF concentrations after various interaction times when drug intercalation took place [89]. The interaction of RIF and NRIF with ds-DNA was studied by DPV at SPE modified with PB290-b-PDMAEMA240 diblock copolymer and MWCNTs. The binding constants of RIF-ds-DNA (1.48 × 104 L/mol/8.56 × 104 L/mol) and NRIF-ds-DNA (2.51 × 104 L/mol/1.78 × 103 L/mol) complexes assessed, based on adenine / guanine oxidation signals, confirmed the intercalation mode of RIF interaction with ds-DNA and suggested a mixed type of interaction (intercalation and electrostatic) in the case of NRIF-ds-DNA formation due to the lower binding constant obtained based on guanine anodic signal [23].
ATR-FTIR studies were used to investigate the mechanism of interaction between RIF and the membrane of neutral (dipalmitoylphosphatidylcholine) and anionic (dipalmitoylphosphatidylcholine:cardiolipin) liposomes. It was found that the main binding sites were phosphate and carbonyl groups of the lipids [158].
There are several studies regarding investigations by fluorescence spectroscopy of RIF interactions with both BSA and HSA. They are based on the RIF ability to quench the natural fluorescence of serum albumin given by the protein tryptophan residues (λex = 285 nm and λem = 350 nm), the mechanism being a static one due to the chemical component (hydrogen bonding, hydrophobic effects, van der Waals’ interactions) between the molecules [30]. The association constant between RIF and BSA [91] and HSA [150] were found to be 1.83 × 105 L/mol and 5.15 × 104 L/mol, respectively. The number of binding sites of RIF with BSA [91,92] and of RSV with BSA and HSA is one; i.e., one rifamycin molecule binds to a tryptophan residue in the polypeptide chain. The binding is realized by hydrogen bonds between the rifamycins’ phenolic group and the tertiary amino group of the indole ring in tryptophan and the hydroxyl group in the rifamycins’ alkyl chain with the carboxyl group of tryptophan [30].
6. Conclusions
The literature data presented in this review emphasize that there is a relatively high interest in the development of sensors and instrumental methods for analysis of rifamycins, especially RIF. Most of these methods (almost one third) made use of electrochemical detection. This can be explained not only by the fact that electrochemical methods have the advantage of being relatively simple, rapid and cheap, but also through the multitude of materials and procedures that allow for the modification of the electrode surface in order to achieve more sensitive and selective determinations. Comparing the RIF therapeutic peak plasma concentration of 8–24 µg/mL (9.72 × 10−6–2.92 × 10−5 mol/L RIF) [159] with the linear ranges of the electrochemical methods reported in the last 20 years for RIF quantification (Table 1), it can be observed that, with one exception [90], all these methods could be applied to RIF blood level monitoring, most of them [19,25,26,27,28,36,45,50,52,56,65,66,67,83,84,86,88,104,106,111,112,114,115,116,117,120,121] needing a previous dilution step to bring RIF concentration into the linear range of the method. UV-Vis spectrometric methods present narrower linear ranges and are less sensitive; therefore, according to the data summarized in Table 2, most RIF determinations based on absorbance measurements may be applied as reported for the assessment of RIF blood concentration. Only a few of them required sample dilution [127,129,133], while the methods using a reagent p-chloranil or Fe(III) [139] are not applicable for such types of analysis. Regarding luminescence-based methods (Table 3 and Table 4), only one cannot be applied to RIF determination in blood samples [151]. Most of the others can be used as described, with a few exceptions [44,49,153,157], which require sample dilution.
The LODs of about 70% of the electrochemical methods reported for RIF determination are comprised in the range 1.00 ×10−9–1.00 × 10−7 mol/L, with few of them achieving LODs lower than 2.2 × 10−7 mol/L [21,50,96]. While UV-Vis spectrometric methods are less sensitive, most luminescence-based methods presented LODs below 8.50 × 10−8 mol/L RIF.
From the point of view of linear range and sensitivity, the majority of the electrochemical and spectrometric methods are suitable for the determination of rifamycins from blood samples and pharmaceutical preparations.
This paper presents a brief overview of some recently published rifamycins delivery methods, with the aim to emphasize the importance of these antibiotics and the continuous concern for improving their efficacy. On the other hand, UV-Vis and IR spectrometric methods constitute valuable tools employed during the development of these drug carrier systems to investigate RIF stability and its release from them.
The review also summarizes the instrumental methods reported for the investigation of RIF interaction with various biologically significant molecules.
Due to the fact that this is an up-to-date, comprehensive critical review on different types of (bio)sensors developed for rifamycins analysis, it is intended to give an overview on the topic for interested researchers and to inspire them toward further developments in the field.
Improvements may be brought in: (i) the selectivity of rifamycins analysis methods (for example, by using MIP-modified sensors) and (ii) the sensors surface regeneration or even avoiding the fouling or the destroying of the sensitive part of the sensor.
It would be of great practical interest to prepare easy to use, disposable sensors (e.g., paper-based devices, screen-printed or pencil graphite electrodes) to be applied in: (i) portable point-of-care testing systems involving non-invasive analysis (e.g., for urine or saliva samples) or (ii) flow systems for on-site environmental samples analysis (e.g., water).
Conceptualization, H.N. and I.G.D.; methodology, I.G.D. and E.E.I.; formal analysis, I.G.D., D.E.P. and M.B.; data curation, I.G.D., M.L.J., A.M.C. and H.N.; Writing—original draft preparation, I.G.D. and M.L.J.; Writing—review and editing, M.B. and D.E.P.; Supervision, E.E.I., H.N. and A.M.C. All authors have read and agreed to the published version of the manuscript.
Not applicable.
Not applicable.
Not applicable.
The authors acknowledge University of Bucharest for the administrative and technical support offered through the grant C1.2.PFE_CDI.2021-587/contract no. 41PFE/30.12.2021.
The authors declare no conflict of interest.
| 1D | first derivative |
| AA | absorbancies additivity |
| ABS | acetate buffer solution |
| AdSDPV | adsorptive stripping differential pulse voltammetry; |
| AdSSWV | adsorptive stripping square wave voltammetry; |
| ATR-FTIR | attenuated total reflectance Fourier-transform infrared spectroscopy |
| BSA | bovine serum albumin |
| C120 | coumarin 120 |
| CC-I | 3′,5-dihydroxyflavone-7-O-β-D-galacturonide-4′-O-β-D-glucopyranoside from Cuminum cyminum seeds |
| CatSt | cationic starch |
| CDs | carbon dots |
| CDs-HSs | carbon dots hydrogel spheres |
| CF | continuous flow |
| CL | chemiluminescence |
| CLS | classical least square |
| CoEnQ10 | coenzyme Q10 |
| CoTHPP | meso-tetrakis(4-hydroxyphenyl)porphyrinato cobalt(II) |
| CP(E) | carbon paste (electrode) |
| CP(ME) | carbon paste (microelectrode) |
| CS | chitosan |
| CSWV | cyclic square-wave voltammetry |
| CTAC | cetyltrimethylammonium chloride |
| CV | cyclic voltammetry |
| CyD | cyclodextrin |
| CYP3A4/CuPPI | cytochrome P450 3A4 attached to copper polypropyleneimine |
| DACCA | 7-(diethylamino)-coumarin-3-carboxylic acid N-succinimidyl ester |
| DDRD | double divisor ratio spectra derivative |
| DRSZ | derivative ratio spectra-zero-crossing |
| DDQ | 2,3-dichloro-5,6-dicyano-1,4-benzoquinone |
| DME | dropping mercury electrode |
| DMF | dimethylformamide |
| DMSO | dimethylsulfoxide |
| DPP/DPV | differential pulse polarography/differential pulse voltammetry |
| ds | double stranded |
| DyNW | dysprosium nanowires |
| ECL | electrochemiluminescence |
| EG-CYP2EI | ethylene glycol bis(succinic acid N-hydroxysuccinimide ester)-modified cytochrome P450 2E1 |
| EIS | electrochemical impedance spectroscopy |
| ETB | ethambutol |
| F64PcZn/TiO2/SPE | perfluorinated phthalocyanine zinc complex deposited on TiO2/screen printed electrode |
| FA | folic acid |
| FCR | Folin-Ciocalteu reduction |
| FI | flow injection |
| FRET | Förster resonance energy transfer |
| FTIR | Fourier-transform infrared spectroscopy |
| GC(E) | glassy carbon (electrode) |
| GCE* | pre-anodized GCE |
| GMO | gadolinium manganese oxide |
| GNPls | graphene nanoplatelets |
| GO | graphene oxide |
| GSH | glutathione |
| HDDR | hybrid double divisor ratio spectra |
| HgFE | mercury film electrode |
| HIV | human immunodeficiency virus |
| HMDE | hanging mercury drop electrode |
| HP-β-CyD | 2-hydroxypropyl β-cyclodextrin |
| HPLC-ECD | high performance liquid chromatography-electrochemical detection |
| HRP | horseradish peroxidase |
| HSA | human serum albumin |
| IR | infrared |
| ISN | isoniazide |
| ITO | indium tin oxide |
| LOD | limit of detection |
| LOQ | limit of quantification |
| LR | linear range |
| LSV | linear sweep voltammetry |
| MEC | microelectrodes modified with Chitosan |
| MI(Ps) | molecular imprinted (polymers) |
| MIPPy-Cu-MOF/MC | molecularly imprinted polypyrrole/copper metal organic framework/mesoporous carbon |
| MSNPs | mesoporous silica nanoparticles |
| Mtb | mycobacteria tuberculosis |
| MWCNTs | multi-walled carbon nanotubes |
| NBS | N-bromosuccinimide |
| NCs | nanoclusters |
| NiHCF | nickel hexacyanoferrate |
| NIR | near infrared |
| N-P-CNDs | nitrogen and phosphorous-doped carbon nanodots |
| NPs | nanoparticles |
| NRIF | nanosome rifampicin (RIF encapsulated in phospholipid micelles) |
| NRs | nanorods |
| NSs | nanosheets |
| NiTAPc | nickel tetraamino phthalocyanine |
| OFM | orthogonal function method |
| PB290-b-PDMAEMA240 | poly(1,2-butadiene)-block- poly(2-(dimethylamino)ethyl methacrylate (the subscripts denote the number-average degrees of polymerization of the respective segment) |
| PBS | phosphate buffer solution |
| PCR | principale component regression |
| PEC | photoelectrochemistry |
| PEG | polyethylene glycol |
| PEI | polyethyleneimine |
| PG(E) | pencil graphite (electrode) |
| PLS | partial least squares |
| PMel | polymelamine |
| PPy | polypyrrole |
| PVP | polyvinyl pyrrolidone |
| PANSA | poly(8-anilino-1-naphthalene sulphonic acid) |
| PYR | pyrazinamide |
| Q-AR | Q-absorption ratio |
| QDs | quantum dots |
| rGO | reduced graphene oxide |
| RFPT | rifapentine |
| RFD | rifandin |
| RIF | rifampicin |
| RSV | rifamycin SV |
| SCV | small colony variants |
| SDS | sodium dodecylsulphate |
| seATRP | simplified electrochemically mediated atom transfer radical polymerization |
| SMDE | static mercury drop electrode |
| SPBDDE | screen-printed boron-doped diamond electrode |
| SPCE | screen-printed carbon electrode |
| SPE | screen-printed electrode |
| SPION | superparamagnetic iron oxide nanoparticles |
| ss | single stranded |
| SWP / SWV | square-wave polarography/square-wave voltammetry |
| TB | tuberculosis |
| TCNQ | 7,7,7,8-tetracyano quinodimethane |
| TDM | therapeutic drug monitoring |
| TiO2/rGO | titanium dioxide nanoparticles anchored reduced graphene oxide sheets |
| UCCS | upconversion core-shell |
| UV | ultraviolet |
| Vis | visible |
| VXC72R | Cabot Vulcan XC72R carbon black |
| WHO | world health organization |
Footnotes
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
![View Image - Figure 2. Schematic representation of drug, matrix former, spray drying excipient and spray-dried RIF-loaded microparticles (adapted from [38]).](https://media.proquest.com/media/hms/THUM/4/hPXaQ?_a=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%2BgIBWYIDA1dlYooDHENJRDoyMDI2MDMxNDEyNTAyMTQ2NTo5NTg4ODM%3D&_s=yYUZcV36eukK1zjibRNkPa%2FAa20%3D "View Image - Figure 2. Schematic representation of drug, matrix former, spray drying excipient and spray-dried RIF-loaded microparticles (adapted from [38]).")
Enlarge this image.Figure 2. Schematic representation of drug, matrix former, spray drying excipient and spray-dried RIF-loaded microparticles (adapted from [38]).
![View Image - Figure 4. The scheme of the “nanonetwork” modified electrode and RIF electrooxidation at its surface [65].](https://media.proquest.com/media/hms/THUM/8/hPXaQ?_a=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%2BgIBWYIDA1dlYooDHENJRDoyMDI2MDMxNDEyNTAyMTQ2NTo5NTg4ODM%3D&_s=09tVgda6%2BiuzlKK4G2NYmvQtIUU%3D "View Image - Figure 4. The scheme of the “nanonetwork” modified electrode and RIF electrooxidation at its surface [65].")
Enlarge this image.Figure 4. The scheme of the “nanonetwork” modified electrode and RIF electrooxidation at its surface [65].
Enlarge this image.Figure 5. Schematic representation of RIF determination based on its fluorescence quenching ability.
The performance characteristics of electrochemical sensors reported in the literature for rifamycins determination.
| Electrode | Technique | LR (mol/L) | LOD (mol/L) | Sample | Ref. |
|---|---|---|---|---|---|
| Rifampicin (RIF) | |||||
| DME | DPP | 1.00 × 10−7–1.00 × 10−4 | - | Spiked human serum | [ |
| SMDE | DPP | 1.00 × 10−7–1.00 × 10−5 | 1.00 × 10−8 | Pharmaceuticals | [ |
| HMDE | SWPOFP |
6.00 × 10−7–1.21 × 10−5 |
2.42 × 10−7 |
Pharmaceuticals; |
[ |
| HMDE | DPV | 4.87× 10−7–2.43 × 10−6 | 2.31 × 10−7 | Pharmaceuticals | [ |
| HMDE | AdSDPV |
3.32 × 10−8–3.85 × 10−7 | 6.13 × 10−9 |
Pharmaceuticals; urine | [ |
| HMDE | AdSDPV |
1.99 × 10−6–2.78 × 10−6 | 1.70 × 10−7 | Pharmaceuticals; urine | [ |
| HgFE/Ag | DPV | 4.87 × 10−7–3.00 × 10−4 | 1.46 × 10−7 | Pharmaceuticals | [ |
| GCE | HPLC/ECD | 1.00 × 10−5–1.00 × 10−1 | 5.00 × 10−10 | Pharmaceuticals; urine | [ |
| Pb/GCE | AdSSWV | 2.50 × 10−10–1.00 × 10−8 | 9.00 × 10−11 | Pharmaceuticals | [ |
| NiHCF/GCE | CV | 5.00 × 10−6–5.00 × 10−4 | 2.60 × 10−6 | Simulated human urine | [ |
| MWCNTs/GCE | CV | 5.00 × 10−4–4.00 × 10−3 | 5.00 × 10−4 | Blood |
[ |
| MWCNTs/GCE | DPV |
4.00 × 10−8–1.00 × 10−5 | 7.51 × 10−9 |
Pharmaceuticals | [ |
| GNPls/GCE | CV; DPV | 1.00 × 10−9–1.00 × 10−4 | 5.00 × 10−10 | - | [ |
| GMONRs/GCE | DPV | 1.50 × 10−7–1.36 × 10−4 | 7.10 × 10−8 | Pharmaceuticals; serum; urine | [ |
| MWCNTs-CeO2 NRs/GCE | DPV | 1.00 × 10−13–1.00 × 10−6 | 3.40 × 10−14 | Human serum | [ |
| MWCNTs–Mo2C/GCE | - | 5.00 × 10−7–7.40 × 10−5 | 4.50 × 10−8 | Pharmaceuticals; human serum | [ |
| MWCNTs-CoTHPP/GCE | CV | 1.00 × 10−8–5.00 × 10−3 | 8.00 × 10−9 | Pharmaceuticals | [ |
| MWCNT-SPION/GCE | CV | 1.00 × 10−6–6.00 × 10−6 | 1.18 × 10−7 | Spiked human urine | [ |
| CoEnQ10/Fe3O4NPs/MWCNTs/GCE | DPV | 2.00 × 10−6–2.00 × 10−5 | Peak I |
Pharmaceuticals | [ |
| CuO@rGO/GCE | CVanodic |
5.00 × 10−8–3.50 × 10−5 |
6.00 × 10−9 |
Pharmaceuticals | [ |
| TiO2/rGO/GCE | DPV | 1.00 × 10−11–1.00 × 10−10 | 3.00 × 10−11 | Pharmaceuticals | [ |
| Ni(OH)2NPs-rGONSs/GCE | LSVpeak I |
6.00 × 10−6–1.00 × 10−5 |
4.16 × 10−9 |
Pharmaceuticals; spiked human serum | [ |
| MoSe2/rGO/β-CyD/GCE | DPV | 1.90 × 10−7–3.75 × 10−4 | 2.80 × 10−8 | Human serum; |
[ |
| PVP capped CoFe2O4@CdSe/GCE | AdSSWV | 1.00 × 10−16–1.00 × 10−7 | 4.55 × 10−17 | Pharmaceuticals; human serum | [ |
| PMel-AuNPs/GCE* | LSV | 8.00 × 10−8–1.50 × 10−5 | 3.00 × 10−8 | Spiked human urine | [ |
| MIPPy/Cu-MOF/MC/GCE | AdSDPV | 8.00 × 10−8–8.50 × 10−5 | 2.80 × 10−10 | Pharmaceuticals; human serum; urine | [ |
| ZrO2@CS/GCE | CV | 1.50 × 10−8–5.47 × 10−4 | 7.50 × 10−9 | Human serum; urine | [ |
| CS/Au/VXC72R/GCE | Amperometry | 5.00 × 10−7–1.00 × 10−5 | 1.10 × 10−7 | Bovine serum | [ |
| BiVO4/SPCE | CV; LSV | 2.00 × 10−7–3.10 × 10−4 | 1.40 × 10−8 | Human serum; urine | [ |
| F64PcZn/TiO2/SPE | PEC | Layer: 1.00 µg/mm2 |
7.00 × 10−9 |
Waste water | [ |
| Electroactivated SPBDDE | AdSDPV | 2.00 × 10−12–1.00 × 10−11 |
2.20 × 10−13 | River water; bovine urine (certified reference material). | [ |
| PGE | AdSDPV | 1.99 × 10−8–1.20 × 10−7 | 1.30 × 10−8 | Pharmaceuticals; urine, spiked human serum | [ |
| CPE | SWV |
5.00 × 10−7–5.00 × 10−5 |
2.35 × 10−7 |
Pharmaceuticals; |
[ |
| DyNW/CPE | AdSSWV | 1.00 × 10−10–1.00 × 10−7 | 5.00 × 10−10 | Pharmaceuticals; |
[ |
| HP-β-CyD/CPE | Potentiometry | 3.20 × 10−8–2.20 × 10−4 | 2.30 × 10−8 | Pharmaceuticals; human blood serum | [ |
| CDs@CuFe2O4/CPE | - | 7.00 × 10−8–8.00 × 10−6 | 2.20 × 10−8 | Biological fluids; pharmaceuticals | [ |
| CPE |
AdSDPVanodic |
3.50 × 10−10–5.40 × 10−9 |
- | - | [ |
| Mn3O4@SiO2/CPME | SWV | 3.00 × 10−8–3.00 × 10−6 | 1.08 × 10−8 | Spiked human serum; urine | [ |
| NiTAPc-GO/ITO | PEC | 2.50 × 10−8–7.13 × 10−5 | 2.50 × 10−9 | Pharmaceuticals | [ |
| EG-CYP2E1/PVP-AgNPs/PANSA/Au | DPV | 2.00 × 10−6–1.40 × 10−5 | 5.00 × 10−8 | Human serum | [ |
| CYP3A4/CuPPI/Au | DPV | 2.00 × 10−10–1.00 × 10−9 | 1.07 × 10−10 | Spiked synthetic plasma and urine | [ |
| HRP/PPy/Pt | Amperometry/ H2O2 | Chemometrics | 5.00 × 10−6 | Pharmaceuticals; urine | [ |
| PPy-β-CyD/Pt | Amperometry | 2.61 × 10−6–2.52 × 10−5 | 1.69 × 10−6 | Pharmaceuticals; |
[ |
| Rifamycin SV (RSV) | |||||
| HMDE | AdSDPV |
Chemometrics | 3.11 × 10−8 |
Pharmaceuticals | [ |
| PGE | AdSDPV | 1.90 × 10−8–4.10 × 10−7 | 6.00 × 10−8 | Pharmaceuticals; urine, spiked human serum | [ |
| MI polyphosphazenes/GCE | DPV | 2.56 × 10−7–6.36 × 10−6 | 3.99 × 10−5 | - | [ |
| CPE |
AdSDPVanodic |
5.00 × 10−11–1.00 × 10−9 |
- | - | [ |
The performance characteristics of spectrometric methods reported in the literature for rifamycins determination.
| Analyte | Method | Wavelength (nm) | LR |
LOD (µg/mL) | Sample | Ref. |
|---|---|---|---|---|---|---|
| RIF | direct |
474 | 0.82–65.38 | - | Pharmaceuticals; urine, plasma | [ |
| RIF | HCl |
263 |
1.50–30.00 | 0.19 |
Pharmaceuticals; urine | [ |
| RIF | PBS pH 7.00 | 470 | 8.00–128.00 | 0.16 | - | [ |
| RIF | direct |
334 | 2.50–35.00 | 0.83 | Combined dosage forms | [ |
| RIF |
AA |
337 |
5.00–35.00 |
1.65 |
Combined dosage forms | [ |
| RIF |
AA |
338 |
5.00–50.00 | 3.50 |
Combined dosage forms | [ |
| RIF |
1D |
365 |
4.00–12.00 | 0.87 |
- | [ |
| RIF |
Q-AR |
387 |
5.00–40.00 |
1.51 |
Combined dosage forms | [ |
| RIF |
Q-AR |
370 |
2.00–20.00 |
0.043 |
In-house combined formulation | [ |
| RIF |
DRSZ |
358 |
2.14 |
Pharmaceuticals; urine | [ |
|
| RIF | Chloranilic acid | 510 | 7.90–39.10 | - | Pharmaceuticals | [ |
| RIF | DDQ |
584 |
5.00–140.00 |
2.59 |
Pharmaceuticals | [ |
| RIF | FCR |
760 |
1.00–35.00 |
0.32 |
Pharmaceuticals; urine | [ |
| RIF | Indirect/NBS + KI | 572 | 0.50–15.50 | - | Pharmaceuticals; urine; plasma | [ |
| RIF |
Cu(II) + neocuproine/ |
8.00–57.00 |
0.06 |
Combined dosage forms; urine | [ |
The performance characteristics of the analytical methods based on fluorescence sensors reported in the literature for rifamycins determination.
| Analyte | Sensor | Wavelength (nm) | LR |
LOD (mol/L) | Sample | Ref. | |
|---|---|---|---|---|---|---|---|
| Excitation | Emission | ||||||
| RIF | (GSH)-capped CdTe/ZnS QDs | 350 | 577 | 1.00 × 10−6–6.80 × 10−5 | 3.04 × 10−7 | Capsules | [ |
| RIF | CatSt-GSH-capped CdTe/ZnS QDs | 475 | 576 | 4.05 × 10−6–3.65 × 10−5 | 6.00 × 10−8 | Capsules | [ |
| RIF | CDs-HSs | 400 | 480 | 2.40 × 10−6–3.38 × 10−5 | 4.60 × 10−7 | Lake and tap water | [ |
| RIF | N-P-CNDs | 340 | 450 | 1.00 × 10−6–1.00 × 10−4 | 6.00 × 10−8 | Capsules | [ |
| RIF | PEI-capped |
362 | 492 | 0.00–2.00 × 10−5 | 5.00 × 10−9 | Human serum | [ |
| RIF | GSH-Cu NCs | - | 632 | 5.00 × 10−11–1.00 × 10−8 | 1.60 × 10−11 | - | [ |
| RIF | FA capped Cu NCs | 358 | 446 | 5.00 × 10−7–1.00 × 10−4 | 7.30 × 10−8 | Capsules; bovine serum; milk | [ |
| RIF | UCCS |
Laser 980 | 475 | 0.00–2.00 × 10−4 | 8.50 × 10−6 | Human urine | [ |
| RFPT |
BSA | 285 | 355 | 8.00 × 10−9–5.00 × 10−5 |
7.60 × 10−10 |
Capsules; human urine | [ |
| RFPT |
HSA | 1.00 × 10−8–4.00 × 10−5 |
8.50 × 10−10 |
||||
| RIF | BSA-Au NCs | 480 | 640 | 6.07 × 10−7–1.00 × 10−3 | 8.50 × 10−8 | Human urine | [ |
The performance characteristics of the analytical methods based on CL sensors reported in the literature for RIF analysis.
| Reagent/Sensor | Method | LR (mol/L) | LOD (mol/L) | Sample | Ref. |
|---|---|---|---|---|---|
| KHSO5 + CoSO4 | FI-CL | 6.08 × 10−8–1.22 × 10−6 | 8.50 × 10−9 | Capsules; eye drops | [ |
| NBS in NaOH + NH3 | CF-CL | 1.22 × 10−8–1.22 × 10− | 6.07 × 10−9 | Combined pharmaceuticals | [ |
| B,N-doped CDs |
FI-CL | 2.00 × 10−10–1.5 × 10−7 | 5.00× 10−11 | Spiked plasma; spiked urine | [ |
| K2S2O8/Pt coil electrode | FI-ECL | 1.00 × 10−7–4.00 × 10−5 | 3.90 × 10−8 | Pharmaceuticals; urine | [ |
| Luminol/Pt flake electrode | ECL | 1.00 × 10−8–4.00 × 10−6 | 8.00 × 10−9 | Pharmaceuticals; urine | [ |
References
1. Preda, D.; David, I.G.; Popa, D.-E.; Buleandra, M.; Radu, G.L. Recent trends in the development of carbon-based electrodes modified with molecularly imprinted polymers for antibiotic electroanalysis. Chemosensors; 2022; 10, 243. [DOI: https://dx.doi.org/10.3390/chemosensors10070243]
2. Yin, M.; Zhang, L.; Wei, X.; Sun, J.; Xu, D. Detection of antibiotics by electrochemical sensors based on metal-organic frameworks and their derived materials. Microchem. J.; 2022; 183, 107946. [DOI: https://dx.doi.org/10.1016/j.microc.2022.107946]
3. Ates, H.C.; Mohsenin, H.; Wenzel, C.; Glatz, R.T.; Wagner, H.J.; Bruch, R.; Hoefflin, N.; Spassov, S.; Streicher, L.; Lozano-Zahonero, S. et al. Biosensor-enabled multiplexed on-site therapeutic drug monitoring of antibiotics. Adv. Mater.; 2022; 34, 2104555. [DOI: https://dx.doi.org/10.1002/adma.202104555] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/34545651]
4. Majdinasab, M.; Mishra, R.K.; Tang, X.; Marty, J.L. Detection of antibiotics in food: New achievements in the development of biosensors. Trends Anal. Chem.; 2020; 127, 115883. [DOI: https://dx.doi.org/10.1016/j.trac.2020.115883]
5. Fu, L.; Mao, S.; Chen, F.; Zhao, S.; Su, W.; Lai, G.; Yu, A.; Lin, C.-T. Graphene-based electrochemical sensors for antibiotic detection in water, food and soil: A scientometric analysis in CiteSpace (2011–2021). Chemosphere; 2022; 297, 134127. [DOI: https://dx.doi.org/10.1016/j.chemosphere.2022.134127]
6. Wang, Q.; Xue, Q.; Chen, T.; Li, J.; Liu, Y.; Shan, X.; Liu, F.; Jia, J. Recent advances in electrochemical sensors for antibiotics and their applications. Chin. Chem. Lett.; 2021; 32, pp. 609-619. [DOI: https://dx.doi.org/10.1016/j.cclet.2020.10.025]
7. David, I.G.; Buleandra, M.; Popa, D.E.; Cheregi, M.C.; Iorgulescu, E.E. Past and present of electrochemical sensors and methods for amphenicol antibiotic analysis. Micromachines; 2022; 13, 667. [DOI: https://dx.doi.org/10.3390/mi13050677]
8. Zhang, M.; Zhang, B.; Li, T.; Zhu, X.; Guo, W. Electrochemical detection of aminoglycoside antibiotics residuals in milk based on magnetic molecularly imprinted particles and metal ions. Food Chem.; 2022; 389, 133120. [DOI: https://dx.doi.org/10.1016/j.foodchem.2022.133120]
9. Yue, F.; Li, H.; Kong, Q.; Liu, J.; Wang, G.; Li, F.; Yang, Q.; Chen, W.; Guo, Y.; Sun, X. Selection of broad-spectrum aptamer and its application in fabrication of aptasensor for detection of aminoglycoside antibiotics residues in milk. Sens. Actuators Chem.; 2022; 351, 130959. [DOI: https://dx.doi.org/10.1016/j.snb.2021.130959]
10. Tran, T.T.T.; Do, M.N.; Dang, T.N.H.; Tran, Q.H.; Le, V.T.; Dao, A.Q.; Vasseghian, Y. A State-of-the-art review on graphene-based nanomaterials to determine antibiotics by electrochemical techniques. Environ. Res.; 2022; 208, 112744. [DOI: https://dx.doi.org/10.1016/j.envres.2022.112744]
11. Joshi, A.; Kim, K.H. Recent advances in nanomaterial-based electrochemical detection of antibiotics: Challenges and future perspectives. Biosens. Bioelectron.; 2020; 153, 112046. [DOI: https://dx.doi.org/10.1016/j.bios.2020.112046] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/32056661]
12. Qian, L.; Durairaj, S.; Prins, S.; Chen, A. Nanomaterial-based electrochemical sensors and biosensors for the detection of pharmaceutical Ccompounds. Biosens. Bioelectron.; 2021; 175, 112836. [DOI: https://dx.doi.org/10.1016/j.bios.2020.112836] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/33272868]
13. Lakshmi, P.R.; Nanjan, P.; Kannan, S.; Shanmugaraju, S. Recent advances in luminescent metal–organic frameworks (LMOFs) based fluorescent sensors for antibiotics. Coord. Chem. Rev.; 2021; 435, 213793. [DOI: https://dx.doi.org/10.1016/j.ccr.2021.213793]
14. Zhou, C.; Zou, H.; Sun, C.; Li, Y. Recent advances in biosensors for antibiotic detection: Selectivity and signal amplification with nanomaterials. Food Chem.; 2021; 361, 130109. [DOI: https://dx.doi.org/10.1016/j.foodchem.2021.130109]
15. Finny, A.S.; Cheng, N.; Andreescu, S. Advances in biosensing technology in the pharmaceutical industry. Biosensing and Micro-Nano Devices; Chandra, P. Springer: Berlin/Heidelberg, Germany, 2022; pp. 243-263. [DOI: https://dx.doi.org/10.1007/978-981-16-8333-6_10]
16. Desai, D.; Shah, M. A review: Validated analytical methods developed on antitubercular drug, rifampicin. J. Pharm. Sci. Bioscientific Res.; 2015; 5, pp. 254-265.
17. Thapliyal, N.; Karpoormath, R.V.; Goyal, R.N. Electroanalysis of antitubercular drugs in pharmaceutical dosage forms and biological fluids: A review. Anal. Chim. Acta; 2015; 853, pp. 59-76. [DOI: https://dx.doi.org/10.1016/j.aca.2014.09.054]
18. de Oliveira, M.A.L.; Chellini, P.; Amorim, T.L. Simultaneous determination of rifampicin, isoniazid, pyrazinamide and ethambutol in fixed dose combination antituberculosis pharmaceutical formulations: A review. Anal. Methods; 2018; 10, pp. 1103-1116. [DOI: https://dx.doi.org/10.1039/C7AY02686B]
19. Farokhi-Fard, A.; Golichenari, B.; Ghanbarlou, M.M.; Zanganeh, S.; Vaziri, F. Electroanalysis of isoniazid and rifampicin: Role of nanomaterial electrode modifiers. Biosens. Bioelectron.; 2019; 146, 111731. [DOI: https://dx.doi.org/10.1016/j.bios.2019.111731]
20. Kotadiya, M.R.; Patel, N.F. Analytical methods practiced to quantitation of rifampicin: A captious survey. Curr. Pharm. Anal.; 2021; 17, pp. 983-999. [DOI: https://dx.doi.org/10.2174/1573412916999200704144231]
21. Dehnavi, A.; Soleymanpour, A. New chemically modified carbon paste sensor for nanomolar concentration measurement of rifampicin in biological and pharmaceutical media. Mat. Sci. Eng. C; 2019; 94, pp. 403-409. [DOI: https://dx.doi.org/10.1016/j.msec.2018.09.052]
22. Maslow, M.J.; Portal-Celhay, C. 27—Rifamycins, In Mandell, Douglas, and Bennett's Principles and Practice of Infectious Diseases; 8th ed. Bennett, J.E.; Dolin, R.; Blaser, M.J.; Saunders, W.B. Elsevier: Amsterdam, The Netherlands, 2015; pp. 339-349.e3. [DOI: https://dx.doi.org/10.1016/B978-1-4557-4801-3.00027-8]
23. Shumyantseva, V.V.; Bulko, T.V.; Tikhonova, E.G.; Sanzhakov, M.A.; Kuzikov, A.V.; Masamrekh, R.A.; Pergushov, D.V.; Schacher, F.H.; Sigolaeva, L.V. Electrochemical studies of the interaction of rifampicin and nanosome/rifampicin with dsDNA. Bioelectrochemistry; 2021; 140, 107736. [DOI: https://dx.doi.org/10.1016/j.bioelechem.2020.107736] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/33494014]
24. van Ingen, J.; Aarnoutse, R.E.; Donald, P.R.; Diacon, A.H.; Dawson, R.; Plemper van Balen, G.; Gillespie, S.H.; Boeree, M.J. Why do we use 600 mg of rifampicin in tuberculosis treatment?. Clin. Infect. Dis.; 2011; 52, pp. 194-199. [DOI: https://dx.doi.org/10.1093/cid/cir184] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/21467012]
25. Lomillo, M.A.A.; Dominguez Renedo, O.; Arcos Martinez, M.J. Optimization procedure, applying the experimental-design methodology, for the determination of rifampicin after metal complexation by differential pulse adsorptive stripping voltammetry. Helv. Chim. Acta; 2002; 85, pp. 2430-2439. [DOI: https://dx.doi.org/10.1002/1522-2675(200208)85:8<2430::AID-HLCA2430>3.0.CO;2-#]
26. Gutierrez-Fernandez, S.; Blanco-Lopez, M.C.; Lobo-Castanon, M.J.; Miranda-Ordieres, A.J.; Tunon-Blanco, P. Adsorptive stripping voltammetry of rifamycins at unmodified and surfactant-modified carbon paste electrodes. Electroanalysis; 2004; 16, pp. 1660-1666. [DOI: https://dx.doi.org/10.1002/elan.200403032]
27. Rastgar, S.; Shahrokhian, S. Nickel hydroxide nanoparticles-reduced graphene oxide nanosheets film: Layer-by-layer electrochemical preparation, characterization and rifampicin sensory application. Talanta; 2014; 119, pp. 156-163. [DOI: https://dx.doi.org/10.1016/j.talanta.2013.10.047]
28. Kul, D. Electrochemical determination of rifampicin based on its oxidation using multi-walled carbon nanotube-modified glassy carbon electrodes. Turk. J. Pharm. Sci.; 2020; 17, pp. 398-407. [DOI: https://dx.doi.org/10.4274/tjps.galenos.2019.33600]
29. Zaborniak, I.; Macior, A.; Chmielarz, P. Stimuli-responsive rifampicin-based macromolecules. Materials; 2020; 13, 3843. [DOI: https://dx.doi.org/10.3390/ma13173843] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/32878162]
30. Yang, J.-D.; Deng, S.-X.; Liu, Z.-F.; Kong, L.; Liu, S.-P. Fluorescence quenching of serum albumin by rifamycin antibiotics and their analytical application. Luminescence; 2007; 22, pp. 559-566. [DOI: https://dx.doi.org/10.1002/bio.1001] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/17768708]
31. Pulikkutty, S.; Manjula, N.; Chen, T.-W.; Chen, S.-M.; Al-onazi, W.A.; Al-Mohaimeed, A.M.; Hsu, H.-Y.; Huang, C.-W.; Yu, M.-C.; Elshikh, M.S. Gadolinium manganese oxide nanorod catalyst via a facile hydrothermal approach: Application for voltammetric sensing of antibiotic drug rifampicin in pharmaceutical and biological samples. J. Electrochem. Soc.; 2022; 169, 057527. [DOI: https://dx.doi.org/10.1149/1945-7111/ac7104]
32. Aminov, R. History of antimicrobial drug discovery: Major classes and health impact. Biochem. Pharmacol.; 2017; 133, pp. 4-19. [DOI: https://dx.doi.org/10.1016/j.bcp.2016.10.001] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/27720719]
33. Munawar, A.; Schirhagl, R.; Rehman, A.; Shaheen, A.; Taj, A.; Bano, K.; Bassous, N.J.; Webster, T.J.; Khan, W.S.; Bajwa, S.Z. Facile in situ generation of bismuth tungstate nanosheet-multiwalled carbon nanotube composite as unconventional affinity material for quartz crystal microbalance detection of antibiotics. J. Hazard. Mat.; 2019; 373, pp. 50-59. [DOI: https://dx.doi.org/10.1016/j.jhazmat.2019.03.054] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/30903956]
34. Han, Y.; Shin, S. Electrochemical behavior and differential pulse polarographic determination of rifampicin in the pharmaceutical preparations. Arch. Pharm. Res.; 2001; 24, pp. 100-104. [DOI: https://dx.doi.org/10.1007/BF02976475] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/11339627]
35. Rifampicin (PIM 472). Available online: https://inchem.org/documents/pims/pharm/rifam.htm (accessed on 25 November 2022).
36. Kozak, J.; Tyszczuk-Rotko, K.; Wójciak, M.; Sowa, I.; Rotko, M. First screen-printed sensor (electrochemically activated screen-printed boron-doped diamond electrode) for quantitative determination of rifampicin by adsorptive stripping voltammetry. Materials; 2021; 14, 4231. [DOI: https://dx.doi.org/10.3390/ma14154231] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/34361425]
37. Ganguly, A.; Hwa, K.-Y.; Santhan, A.; Sharma, T.S.K. Strategic orchestration of MoSe2 microspheres on β-cd functionalized rGO: A sustainable electrocatalyst for detection of rifampicin in real samples. Chemosphere; 2022; 307, 135373. [DOI: https://dx.doi.org/10.1016/j.chemosphere.2022.135373]
38. Naz, F.F.; Shah, K.U.; Niazi, Z.R.; Zaman, M.; Lim, V.; Alfatama, M. Polymeric microparticles: Synthesis, characterization and in vitro evaluation for pulmonary delivery of rifampicin. Polymers; 2022; 14, 2491. [DOI: https://dx.doi.org/10.3390/polym14122491] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/35746067]
39. Melo, K.J.C.; Henostroza, M.A.B.; Löbenberg, R.; Bou-Chacra, N.A. Rifampicin nanocrystals: Towards an innovative approach to treat tuberculosis. Mat. Sci. Eng.; 2020; 112, 110895. [DOI: https://dx.doi.org/10.1016/j.msec.2020.110895]
40. Liang, Y.-D.; Song, J.-F.; Xu, M. Electrochemiluminescence from successive electro- and chemo-oxidation of rifampicin and its application to the determination of rifampicin in pharmaceutical preparations and human urine. Spectrochim. Acta A Mol.; 2007; 67, pp. 430-436. [DOI: https://dx.doi.org/10.1016/j.saa.2006.07.036]
41. Motiei, M.; Pleno de Gouveia, L.; Šopík, T.; Vícha, R.; Škoda, D.; Císař, J.; Khalili, R.; Domincová Bergerová, E.; Münster, L.; Fei, H. et al. Nanoparticle-based rifampicin delivery system development. Molecules; 2021; 26, 2067. [DOI: https://dx.doi.org/10.3390/molecules26072067]
42. Neto, A.S.; Pereira, P.; Fonseca, A.C.; Dias, C.; Almeida, M.C.; Barros, I.; Miranda, C.O.; de Almeida, L.P.; Morais, P.V.; Coelho, J.F.J. et al. Highly porous composite scaffolds endowed with antibacterial activity for multifunctional grafts in bone repair. Polymers; 2021; 13, 4378. [DOI: https://dx.doi.org/10.3390/polym13244378]
43. Santos, R.H.T.; Santos, N.G.; Alves, J.P.H.; Garcia, C.A.B.; Romão, L.C.P.; Arguelho, M.L.P.M. Evaluation of the physico-chemical properties of chitosan as a potential carrier for rifampicin, using voltammetric and spectrophotometric techniques. Bioelectrochemistry; 2008; 72, pp. 122-126. [DOI: https://dx.doi.org/10.1016/j.bioelechem.2008.01.003]
44. Shokri, R.; Amjadi, M. Boron and nitrogen co-doped carbon dots as a chemiluminescence probe for sensitive assay of rifampicin. J. Photochem. Photobiol.; 2021; 425, 113694. [DOI: https://dx.doi.org/10.1016/j.jphotochem.2021.113694]
45. Amidi, S.; Hosseinzadeh Ardakani, Y.; Amiri-Aref, M.; Ranjbari, E.; Sepehri, Z.; Bagheri, H. Sensitive electrochemical determination of rifampicin using gold nanoparticles/poly-melamine nanocomposite. RSC Adv.; 2017; 7, pp. 40111-40118. [DOI: https://dx.doi.org/10.1039/C7RA04865C]
46. Global Tuberculosis Report 2022. Available online: https://www.who.int/teams/global-tuberculosis-programme/tb-reports/global-tuberculosis-report-2022 (accessed on 29 November 2022).
47. Santos, K.P.; Rodero, C.F.; Ribeiro, C.M.; Gremião, M.P.D.; Peccinini, R.G.; Pavan, F.R.; Pearce, C.; Gonzalez-Juarrero, M.; Chorilli, M. Development of a mucoadhesive liquid crystal system for the administration of rifampicin applicable in tuberculosis therapy. Life; 2022; 12, 1138. [DOI: https://dx.doi.org/10.3390/life12081138] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/36013317]
48. Galdopórpora, J.M.; Martinena, C.; Bernabeu, E.; Riedel, J.; Palmas, L.; Castangia, I.; Manca, M.L.; Garcés, M.; Lázaro-Martinez, J.; Salgueiro, M.J. et al. Inhalable mannosylated rifampicin–curcumin co-loaded nanomicelles with enhanced in vitro antimicrobial efficacy for an optimized pulmonary tuberculosis therapy. Pharmaceutics; 2022; 14, 959. [DOI: https://dx.doi.org/10.3390/pharmaceutics14050959]
49. Ma, Y.; Zhan, B.-T.; Zhao, L.-X.; Guo, G.-S.; Lin, J.-M. Determination of rifampicin by peroxomonosulfate-cobalt(II) chemiluminescence system. Chin. J. Chem.; 2008; 26, pp. 905-910. [DOI: https://dx.doi.org/10.1002/cjoc.200890166]
50. Ajayi, R.F.; Sidwaba, U.; Feleni, U.; Douman, S.F.; Tovide, O.; Botha, S.; Baker, P.; Fuku, X.G.; Hamid, S.; Waryo, T.T. et al. Chemically amplified cytochrome P450-2E1 drug metabolism nanobiosensor for rifampicin anti-tuberculosis drug. Electrochim. Acta; 2014; 128, pp. 149-155. [DOI: https://dx.doi.org/10.1016/j.electacta.2013.12.147]
51. Amusengeri, A.; Khan, A.; Tastan Bishop, Ö. The structural basis of mycobacterium tuberculosis RpoB drug-resistant clinical mutations on rifampicin drug binding. Molecules; 2022; 27, 885. [DOI: https://dx.doi.org/10.3390/molecules27030885]
52. Sagar, P.; Srivastava, M.; Srivastava, S.K. Electrochemical sensor for the anti-tuberculosis drug rifampicin on CuO@rGO-nanocomposite-modified GCE by voltammetry techniques. ChemistrySelect; 2022; 7, e202202271. [DOI: https://dx.doi.org/10.1002/slct.202202271]
53. Vinothkumar, V.; Sangili, A.; Chen, S.-M.; Abinaya, M. Additive-free synthesis of BiVO4 microspheres as an electrochemical sensor for determination of antituberculosis drug rifampicin. Colloids Surf. Physicochem. Eng. Asp.; 2021; 624, 126849. [DOI: https://dx.doi.org/10.1016/j.colsurfa.2021.126849]
54. Chatterjee, K.; Kuo, C.W.; Chen, A.; Chen, P. Detection of residual rifampicin in urine via fluorescence quenching of gold nanoclusters on paper. J. Nanobiotechnol.; 2015; 13, 46. [DOI: https://dx.doi.org/10.1186/s12951-015-0105-5]
55. Szlósarczyk, M.; Piech, R.; Milc, A.; Hubicka, U. Fast and sensitive voltammetric method for the determination of rifampicin on renewable amalgam film electrode. Sensors; 2021; 21, 5792. [DOI: https://dx.doi.org/10.3390/s21175792] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/34502683]
56. Maher, H.M.; Youssef, R.M. Simultaneous determination of ternary drug mixtures using square wave polarography subjected to non-parametric and chemometric peak convolution. Chemom. Intell. Lab. Syst.; 2008; 94, pp. 95-103. [DOI: https://dx.doi.org/10.1016/j.chemolab.2008.06.013]
57. du Toit, L.C.; Pillay, V.; Danckwerts, M.P. Tuberculosis chemotherapy: Current drug delivery approaches. Respir. Res.; 2006; 7, 118. [DOI: https://dx.doi.org/10.1186/1465-9921-7-118] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/16984627]
58. Sharma, A.; Puri, V.; Kumar, P.; Singh, I.; Huanbutta, K. Development and evaluation of rifampicin loaded alginate–gelatin biocomposite microfibers. Polymers; 2021; 13, 1514. [DOI: https://dx.doi.org/10.3390/polym13091514] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/34066853]
59. Yulug, B.; Hanoglu, L.; Kilic, E.; Schabitz, W.R. RIFAMPICIN: An antibiotic with brain protective function. Brain Res. Bull.; 2014; 107, pp. 37-42. [DOI: https://dx.doi.org/10.1016/j.brainresbull.2014.05.007]
60. Umeda, T.; Hatanaka, Y.; Sakai, A.; Tomiyama, T. Nasal rifampicin improves cognition in a mouse model of dementia with Lewy bodies by reducing α-Synuclein oligomers. Int. J. Mol. Sci.; 2021; 22, 8453. [DOI: https://dx.doi.org/10.3390/ijms22168453]
61. Umeda, T.; Uekado, R.; Shigemori, K.; Eguchi, H.; Tomiyama, T. Nasal rifampicin halts the progression of tauopathy by inhibiting Tau oligomer propagation in Alzheimer brain extract-injected mice. Biomedicines; 2022; 10, 297. [DOI: https://dx.doi.org/10.3390/biomedicines10020297]
62. Yulug, B.; Hanoglu, L.; Ozansoy, M.; Isık, D.; Kilic, U.; Kilic, E.; Schabitz, W.R. Therapeutic role of rifampicin in Alzheimer’s disease. Psychiat. Clin. Neuros.; 2018; 72, pp. 152-159. [DOI: https://dx.doi.org/10.1111/pcn.12637]
63. Ali, M.R.K.; Panikkanvalappil, S.R.; El-Sayed, M.A. Enhancing the efficiency of gold nanoparticles treatment of cancer by increasing their rate of endocytosis and cell accumulation using rifampicin. J. Am. Chem. Soc.; 2014; 136, pp. 4464-4467. [DOI: https://dx.doi.org/10.1021/ja4124412]
64. Chakraborty, A.; Panda, A.K.; Ghosh, R.; Roy, I.; Biswas, A. Depicting the DNA binding and photo-nuclease ability of anti-mycobacterial drug rifampicin: A biophysical and molecular docking perspective. Int. J. Biol. Macromol.; 2019; 127, pp. 187-196. [DOI: https://dx.doi.org/10.1016/j.ijbiomac.2019.01.034]
65. Zhang, N.; Brites Helu, M.; Zhang, K.; Fang, X.; Yin, H.; Chen, J.; Ma, S.; Fang, A.; Wang, C. Multiwalled carbon nanotubes-CeO2 nanorods: A “nanonetwork” modified electrode for detecting trace rifampicin. Nanomaterials; 2020; 10, 391. [DOI: https://dx.doi.org/10.3390/nano10020391] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/32102232]
66. Veera Manohara Reddy, Y.; Sravani, B.; Łuczak, T.; Mallikarjuna, K.; Madhavi, G. An ultra-sensitive rifampicin electrochemical sensor based on titanium nanoparticles (TiO2) anchored reduced graphene oxide modified glassy carbon electrode. Colloids Surf.; 2021; 608, 125533. [DOI: https://dx.doi.org/10.1016/j.colsurfa.2020.125533]
67. Chokkareddy, R.; Bhajanthri, N.K.; Redhi, G.G. A novel electrode architecture for monitoring rifampicin in various pharmaceuticals. Int. J. Electrochem. Sci.; 2017; 12, pp. 9190-9203. [DOI: https://dx.doi.org/10.20964/2017.10.13]
68. Rawool, C.R.; Srivastava, A.K. A dual template imprinted polymer modified electrochemical sensor based on Cu metal organic framework/mesoporous carbon for highly sensitive and selective recognition of rifampicin and isoniazid. Sens. Actuators Chem.; 2019; 288, pp. 493-506. [DOI: https://dx.doi.org/10.1016/j.snb.2019.03.032]
69. Al-Joufi, F.; Elmowafy, M.; Alruwaili, N.K.; Alharbi, K.S.; Shalaby, K.; Alsharari, S.D.; Ali, H.M. Mucoadhesive in situ rectal gel loaded with rifampicin: Strategy to improve bioavailability and alleviate liver toxicity. Pharmaceutics; 2021; 13, 336. [DOI: https://dx.doi.org/10.3390/pharmaceutics13030336]
70. Asadpour-Zeynali, K.; Soheili-Azad, P. Simultaneous polarographic determination of isoniazid and rifampicin by differential pulse polarography method and support vector regression. Electrochim. Acta; 2010; 55, pp. 6570-6576. [DOI: https://dx.doi.org/10.1016/j.electacta.2010.06.018]
71. Anjani, Q.K.; Domínguez-Robles, J.; Utomo, E.; Font, M.; Martínez-Ohárriz, M.C.; Permana, A.D.; Cárcamo-Martínez, Á.; Larrañeta, E.; Donnelly, R.F. Inclusion complexes of rifampicin with native and derivatized cyclodextrins: In silico modeling, formulation, and characterization. Pharmaceuticals; 2022; 15, 20. [DOI: https://dx.doi.org/10.3390/ph15010020]
72. Niewolik, D.; Bednarczyk-Cwynar, B.; Ruszkowski, P.; Kazek-Kęsik, A.; Dzido, G.; Jaszcz, K. Biodegradable and bioactive carriers based on poly(betulin disuccinate-co-sebacic acid) for rifampicin delivery. Pharmaceutics; 2022; 14, 579. [DOI: https://dx.doi.org/10.3390/pharmaceutics14030579]
73. Marchianò, V.; Matos, M.; Marcet, I.; Cabal, M.P.; Gutiérrez, G.; Blanco-López, M.C. Stability of non-ionic surfactant vesicles loaded with rifamycin S. Pharmaceutics; 2022; 14, 2626. [DOI: https://dx.doi.org/10.3390/pharmaceutics14122626]
74. Subramaniam, S.; Thomas, N.; Gustafsson, H.; Jambhrunkar, M.; Kidd, S.P.; Prestidge, C.A. Rifampicin-loaded mesoporous silica nanoparticles for the treatment of intracellular infections. Antibiotics; 2019; 8, 39. [DOI: https://dx.doi.org/10.3390/antibiotics8020039]
75. Joyce, P.; Ulmefors, H.; Maghrebi, S.; Subramaniam, S.; Wignall, A.; Jõemetsa, S.; Höök, F.; Prestidge, C.A. Enhancing the cellular uptake and antibacterial activity of rifampicin through encapsulation in mesoporous silica nanoparticles. Nanomaterials; 2020; 10, 815. [DOI: https://dx.doi.org/10.3390/nano10040815] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/32344619]
76. Lee, J.-H.; Park, J.-K.; Son, K.-H.; Lee, J.-W. PCL/sodium-alginate based 3D-printed dual drug delivery system with antibacterial activity for osteomyelitis therapy. Gels; 2022; 8, 163. [DOI: https://dx.doi.org/10.3390/gels8030163] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/35323276]
77. Grotz, E.; Tateosian, N.L.; Salgueiro, J.; Bernabeu, E.; Gonzalez, L.; Manca, M.L.; Amiano, N.; Valenti, D.; Manconi, M.; García, V. et al. Pulmonary delivery of rifampicin-loaded soluplus micelles against Mycobacterium tuberculosis. J. Drug Deliv. Sci. Technol.; 2019; 53, 101170. [DOI: https://dx.doi.org/10.1016/j.jddst.2019.101170]
78. Fernández-Gutiérrez, M.; Pérez-Köhler, B.; Benito-Martínez, S.; García-Moreno, F.; Pascual, G.; García-Fernández, L.; Aguilar, M.R.; Vázquez-Lasa, B.; Bellón, J.M. Development of biocomposite polymeric systems loaded with antibacterial nanoparticles for the coating of polypropylene biomaterials. Polymers; 2020; 12, 1829. [DOI: https://dx.doi.org/10.3390/polym12081829] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/32824142]
79. Chawla, P.K.; Udwadia, Z.F.; Soman, R.; Mahashur, A.A.; Amale, R.A.; Dherai, A.J.; Lokhande, R.V.; Naik, P.R.; Ashavaid, T.F. Importance of therapeutic drug monitoring of rifampicin. J. Assoc. Physicians India; 2016; 64, pp. 68-72.
80. Hammam, E.; Beltagi, A.M.; Ghoneim, M.M. Voltammetric assay of rifampicin and isoniazid drugs, separately and combined in bulk, pharmaceutical formulations and human serum at a carbon paste electrode. Microchem. J.; 2004; 77, pp. 53-62. [DOI: https://dx.doi.org/10.1016/j.microc.2003.12.003]
81. Li, B.; He, Y.; Lv, J.; Zhang, Z. Simultaneous determination of rifampicin and isoniazid by continuous-flow chemiluminescence with artificial neural network calibration. Anal. Bioanal. Chem.; 2005; 383, pp. 817-824. [DOI: https://dx.doi.org/10.1007/s00216-005-0087-5]
82. Wahdan, T. Voltammetric method for the simultaneous determination of rifampicin and isoniazid in pharmaceutical formulations. Chem. Anal.; 2005; 50, pp. 457-464.
83. Leandro, K.C.; Carvalho, J.M.; Giovanelli, L.F.; Moreira, J.C. Development and validation of an electroanalytical methodology for determination of isoniazid and rifampicin. Braz. J. Pharm. Sci.; 2009; 45, pp. 331-337. [DOI: https://dx.doi.org/10.1590/S1984-82502009000200019]
84. Kawde, A.N.; Temerk, Y.; Farhan, N. Adsorptive stripping voltammetry of antibiotics rifamycin SV and rifampicin at renewable pencil electrodes. Acta Chim. Slov.; 2014; 61, pp. 398-405.
85. Yan, H.; Zhou, Y.; Xie, Q.; Zhang, Y.; Zhang, P.; Xiao, H.; Wang, W.; Yao, S. Simultaneous analysis of isoniazid and rifampicin by high-performance liquid chromatography with gradient elution and wall-jet/thin-layer electrochemical detection. Anal. Methods; 2014; 6, pp. 1530-1537. [DOI: https://dx.doi.org/10.1039/c3ay41794h]
86. Franke, C.; Ajayi, R.F.; Uhuo, O.; Januarie, K.; Iwuoha, E. Metallodendrimer-sensitised cytochrome P450 3A4 electrochemical biosensor for TB drugs. Electroanalysis; 2020; 32, pp. 3075-3085. [DOI: https://dx.doi.org/10.1002/elan.202060384]
87. Lomillo, M.A.A.; Dominguez Renedo, O.; Arcos Martinez, M.J. Resolution of ternary mixtures of rifampicin, isoniazid and pyrazinamide by differential pulse polarography and partial squares method. Anal. Chim. Acta; 2001; 449, pp. 167-177. [DOI: https://dx.doi.org/10.1016/S0003-2670(01)01360-5]
88. Shiri, S.; Pajouheshpoor, N.; Khoshsafar, H.; Amidi, S.; Bagheri, H. An electrochemical sensor for the simultaneous determination of rifampicin and isoniazid using a C-dots@CuFe2 O4 nanocomposite modified carbon paste electrode. New J. Chem.; 2017; 41, pp. 15564-15573. [DOI: https://dx.doi.org/10.1039/C7NJ03029K]
89. Girousi, S.T.; Gherghi, C.; Karava, M.K. DNA-modified carbon paste electrode applied to the study of interaction between Rifampicin (RIF) and DNA in solution and at the electrode surface. J. Pharm. Biomed. Anal.; 2004; 36, pp. 851-858. [DOI: https://dx.doi.org/10.1016/j.jpba.2004.08.034]
90. Radhi, M.M.; Ibrahim, A.I.; Al-Haidarie, Y.K.; Al-Asadi, S.A.; Al-Mulla, E.A.J. Rifampicin: Electrochemical effect on blood component by cyclic voltammetry using nano-sensor. Nano Biomed. Eng.; 2019; 11, pp. 150-156. [DOI: https://dx.doi.org/10.5101/nbe.v11i2.p150-156]
91. Kamat, B.P.; Seerharamappa, J. Mechanism of interaction of vincristine sulphate and rifampicin with bovine serum albumin: A spectroscopic study. J. Chem. Sci.; 2005; 117, pp. 649-655. [DOI: https://dx.doi.org/10.1007/BF02708294]
92. Yu, O.-Y.; Cheng, Y.-F.; Huang, S.-Y.; Bai, A.-M.; Hu, Y.-J. Probing the binding of rifampicin to bovine serum albumin in aqueous solution. Solut. Chem.; 2011; 40, pp. 1711-1723. [DOI: https://dx.doi.org/10.1007/s10953-011-9747-6]
93. Naveenraj, S.; Anandan, S. Binding of serum albumins with bioactive substances—Nanoparticles to drugs. J. Photochem. Photobiol.; 2013; 14, pp. 53-71. [DOI: https://dx.doi.org/10.1016/j.jphotochemrev.2012.09.001]
94. Ribeiro da Cunha, B.; Fonseca, L.P.; Calado, C.R.C. Simultaneous elucidation of antibiotic mechanism of action and potency with high-throughput Fourier-transform infrared (FTIR) spectroscopy and machine learning. Appl. Microbiol. Biotechnol.; 2021; 105, pp. 1269-1286. [DOI: https://dx.doi.org/10.1007/s00253-021-11102-7]
95. Biçer, E.; Özdemir, S. Voltammetric and spectroscopic studies on the interaction of anti-cancer herbal drug rutin with an anti-tuberculosis agent rifampicin. Russ. J. Electrochem.; 2010; 46, pp. 896-903. [DOI: https://dx.doi.org/10.1134/S1023193510080069]
96. Biçer, E.; Pehlivan, V. Voltammetric, FTIR spectroscopic and thermal analysis studies on adduct formations of rifampicin with soft nucleophiles cysteine and glutathione. Russ. J. Electrochem.; 2020; 56, pp. 556-569. [DOI: https://dx.doi.org/10.1134/S1023193520070022]
97. Al-Hashimi, B.; Rahman, H.S.; Omer, K.M. Highly luminescent and biocompatible P and N co-doped passivated carbon nanodots for the sensitive and selective determination of rifampicin using the inner filter effect. Materials; 2020; 13, 2275. [DOI: https://dx.doi.org/10.3390/ma13102275] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/32429119]
98. Cai, W.; Weng, X.; Chen, Z. Highly efficient removal of antibiotic rifampicin from aqueous solution using green synthesis of recyclable nano-Fe3O4. Environ. Pollut.; 2019; 247, pp. 839-846. [DOI: https://dx.doi.org/10.1016/j.envpol.2019.01.108] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/30731309]
99. Hussain, A.; Mahdi, W.A.; Alshehri, S.; Bukhari, S.I.; Almaniea, M.A. Application of green nanoemulsion for elimination of rifampicin from a bulk aqueous solution. Int. J. Environ. Res. Public Health; 2021; 18, 5835. [DOI: https://dx.doi.org/10.3390/ijerph18115835]
100. Ebratkhahan, M.; Zarei, M.; Akpinar, I.Z.; Metin, Ö. One-pot synthesis of graphene hydrogel/M (M: Cu, Co, Ni) nanocomposites as cathodes for electrochemical removal of rifampicin from polluted water. Environ. Res.; 2022; 214, 113789. [DOI: https://dx.doi.org/10.1016/j.envres.2022.113789]
101. El-Shafie, A.S.; Ahsan, I.; Radhwani, M.; Al-Khangi, M.A.; El-Azazy, M. Synthesis and application of cobalt oxide (Co3O4)-impregnated olive stones biochar for the removal of rifampicin and tigecycline: Multivariate controlled performance. Nanomaterials; 2022; 12, 379. [DOI: https://dx.doi.org/10.3390/nano12030379]
102. da Silva Duarte, J.L.; Solano, A.M.S.; Arguelho, M.L.P.M.; Tonholo, J.; Martínez-Huitle, C.A.; de Paiva e Silva Zanta, C.L. Evaluation of treatment of effluents contaminated with rifampicin by Fenton, electrochemical and associated processes. J. Water Proc. Eng.; 2018; 22, pp. 250-257. [DOI: https://dx.doi.org/10.1016/j.jwpe.2018.02.012]
103. Brito, L.R.D.; Ganiyu, S.O.; dos Santos, E.V.; Oturan, M.A.; Martínez-Huitle, C.A. Removal of antibiotic rifampicin from aqueous media by advanced electrochemical oxidation: Role of electrode materials, electrolytes and real water matrices. Electrochim. Acta; 2021; 396, 139254. [DOI: https://dx.doi.org/10.1016/j.electacta.2021.139254]
104. Lomillo, M.A.A.; Dominguez Renedo, O.; Arcos Martinez, M.J. Optimization of the experimental parameters in the determination of rifampicin by adsorptive stripping voltammetry. Electroanalysis; 2002; 14, pp. 634-637. [DOI: https://dx.doi.org/10.1002/1521-4109(200205)14:9<634::AID-ELAN634>3.0.CO;2-O]
105. Alonso, M.A.; Sanllorente, S.; Sarabia, L.A.; Arcos, M.J. Optimization of the experimental parameters in the determination of rifamycin SV by adsorptive stripping voltammetry. Anal. Chim. Acta; 2000; 405, pp. 123-133. [DOI: https://dx.doi.org/10.1016/S0003-2670(99)00762-X]
106. Tyszczuk, K.; Korolczuk, M. New protocol for determination of rifampicine by adsorptive stripping voltammetry. Electroanalysis; 2009; 21, pp. 101-106. [DOI: https://dx.doi.org/10.1002/elan.200804447]
107. de-Oliveira, P.R.; Schibelbain, A.F.; Neiva, E.G.; Zarbin, A.J.G.; Marcolino Junior, L.H.; Bergamini, M.F. Nickel hexacyanoferrate supported at nickel nanoparticles for voltammetric determination of rifampicin. Sens. Actuators; 2018; 260, pp. 816-823. [DOI: https://dx.doi.org/10.1016/j.snb.2017.12.198]
108. Zou, J.; Huang, L.-L.; Jiang, X.-Y.; Jiao, F.-P.; Yu, J.-G. Electrochemical behaviors and determination of rifampicin on graphene nanoplatelets modified glassy carbon electrode in sulfuric acid solution. Desalination Water Treat.; 2018; 120, pp. 272-281. [DOI: https://dx.doi.org/10.5004/dwt.2018.22750]
109. Huang, Q.; Li, X.K.; Feng, S.X.; Zhuge, W.F.; Liu, F.P.; Peng, J.Y.; Mo, S.C. An electrochemical sensor based on the composite of molybdenum carbides and a multiwalled carbon nanotube modified electrode for the ultrasensitive detection of rifampicin. Anal. Methods; 2018; 10, pp. 3594-3601. [DOI: https://dx.doi.org/10.1039/C8AY00852C]
110. Sonkar, P.K.; Yadav, M.; Prakash, K.; Ganesan, V.; Sankar, M.; Yadav, D.K.; Gupta, R. Electrochemical sensing of rifampicin in pharmaceutical samples using meso-tetrakis(4-hydroxyphenyl)porphyrinato cobalt(II) anchored carbon nanotubes. J. Appl. Electrochem.; 2018; 48, pp. 937-946. [DOI: https://dx.doi.org/10.1007/s10800-018-1221-3]
111. Bano, K.; Bajwa, S.Z.; Ihsan, A.; Hussain, I.; Jameel, N.; Rehman, A.; Taj, A.; Younus, S.; Zubair Iqbal, M.; Butt, F.K. et al. Synthesis of SPIONs-CNT based novel nanocomposite for effective amperometric sensing of first-line antituberculosis drug rifampicin. J. Nanosci. Nanotechnol.; 2020; 20, pp. 2130-2137. [DOI: https://dx.doi.org/10.1166/jnn.2020.17204]
112. Asadpour-Zeynali, K.; Mollarasouli, F. Novel electrochemical biosensor based on PVP capped CoFe2O4@CdSecore-shell nanoparticles modified electrode for ultra-trace level determination of rifampicin by square wave adsorptive stripping voltammetry. Biosens. Bioelectron.; 2017; 92, pp. 509-516. [DOI: https://dx.doi.org/10.1016/j.bios.2016.10.071]
113. Chen, T.-W.; Vasantha, A.S.; Chen, S.-M.; Al Farraj, D.A.; Elshikh, M.S.; Alkufeidy, R.M.; Al Khulaifi, M.M. Sonochemical synthesis and fabrication of honeycomb like zirconium dioxide with chitosan modified electrode for sensitive electrochemical determination of anti-tuberculosis (TB) drug. Ultrason. Sonochem.; 2019; 59, 104718. [DOI: https://dx.doi.org/10.1016/j.ultsonch.2019.104718]
114. Xing, R.; Zhao, X.; Xu, Y.; Yang, H.; Chang, Z.; Qu, J.; Liu, X.; Yang, J.H.; Liu, S. Sensitive detection of rifampicin based on Au-carbon nanocomposite. J. Nanosci. Nanotechnol.; 2018; 18, pp. 62-67. [DOI: https://dx.doi.org/10.1166/jnn.2018.14560]
115. Blidar, A.; Trashin, S.; Carrion, E.N.; Gorun, S.M.; Cristea, C.; De Wael, K. Enhanced photoelectrochemical detection of an analyte triggered by its concentration by a singlet oxygen-generating fluoro photosensitizer. ACS Sens.; 2020; 5, pp. 3501-3509. [DOI: https://dx.doi.org/10.1021/acssensors.0c01609] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/33118815]
116. Daneshgar, P.; Norouzi, P.; Dousty, F.; Ganjali, M.R.; Moosavi-Movahedi, A.A. Dysprosium yydroxide nanowires modified electrode for determination of rifampicin drug in human urine and capsules by adsorptive square wave voltammetry. Curr. Pharm. Anal.; 2009; 5, pp. 246-255. [DOI: https://dx.doi.org/10.2174/157341209788922066]
117. Gan, T.; Shi, Z.; Wang, K.; Sun, J.; Lv, Z.; Liu, Y. Rifampicin determination in human serum and urine based on a disposable carbon paste microelectrode modified with a hollow manganese oxide@mesoporous silica oxide core-shell nanohybrid. Can. J. Chem.; 2015; 93, pp. 1061-1068. [DOI: https://dx.doi.org/10.1139/cjc-2015-0017]
118. Peng, J.; Huang, Q.; Liu, Y.; Liu, F.; Zhang, C.; Huang, Y.; Huang, W. The synthesis of graphene oxide covalently linked with nickeltetraamino phthalocyanine: A photoelectrochemical sensor for the analysis of rifampicin irradiated with blue light. J. Chin Chem. Soc.; 2019; 66, pp. 1311-1317. [DOI: https://dx.doi.org/10.1002/jccs.201800451]
119. Lomillo, M.A.A.; Kauffmann, J.M.; Martinez, M.J.A. HRP-based biosensor for monitoring rifampicin. Biosens. Bioelectron.; 2003; 18, pp. 1165-1171. [DOI: https://dx.doi.org/10.1016/S0956-5663(02)00251-8] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/12788559]
120. Lomillo, M.A.A.; Renedo, O.D.; Martinez, M.J.A. Optimization of a cyclodextrin-based sensor for rifampicin monitoring. Electrochim. Acta; 2005; 50, pp. 1807-1811. [DOI: https://dx.doi.org/10.1016/j.electacta.2004.08.032]
121. Gutierrez-Fernandez, S.; Lobo-Castanon, M.J.; Miranda-Ordieres, A.J.; Tunon-Blanco, P.; Carriedo, G.A.; Garcia-Alonso, F.J.; Fidalgo, J.I. Molecularly imprinted polyphosphazene films as recognition element in a voltammetric rifamycin SV sensor. Electroanalysis; 2001; 13, pp. 1399-1404. [DOI: https://dx.doi.org/10.1002/1521-4109(200111)13:17<1399::AID-ELAN1399>3.0.CO;2-W]
122. David, I.G.; Buleandra, M.; Popa, D.E.; Cheregi, M.C.; David, V.; Iorgulescu, E.E.; Tartareanu, G.O. Recent developments in voltammetric analysis of pharmaceuticals using disposable pencil graphite electrodes. Processes; 2022; 10, 472. [DOI: https://dx.doi.org/10.3390/pr10030472]
123. Blanco-Lopez, M.C.; Gutierrez-Fernandez, S.; Lobo-Castanon, M.J.; Miranda-Ordieres, A.J.; Tunon-Blanco, P. Electrochemical sensing with electrodes modified with molecularly imprinted polymer films. Anal. Bioanal. Chem.; 2004; 378, pp. 1922-1928. [DOI: https://dx.doi.org/10.1007/s00216-003-2330-2]
124. Mollarasouli, F.; Kurbanoglu, S.; Asadpour-Zeynali, K.; Ozkan, S.A. Non-enzymatic monitoring of hydrogen peroxide using novel nanosensor based on CoFe2O4@CdSeQD magnetic nanocomposite and rifampicin mediator. Anal. Bioanal. Chem.; 2020; 412, pp. 5053-5065. [DOI: https://dx.doi.org/10.1007/s00216-019-02306-y]
125. Arifa Begum, S.K.; Basava, R.D.; Rama Rao, N. Simultaneous estimation of rifampicin and isoniazid in combined dosage formby a simple UV spectrophotometric method. Der. Pharm. Lett.; 2013; 5, pp. 419-426.
126. Tilinca, M.; Hancu, G.; Mircia, E.; Iriminescu, D.; Rusu, A.; Vlad, R.A.; Barabás, E. Simultaneous determination of isoniazid and rifampicin by uv spectrophotometry. Farmacia; 2017; 65, pp. 219-224.
127. Marques, M.S.; Dal Pont Morisso, F.; Poletto, F.; Külkamp Guerreiro, I.C. Development of derivative spectrophotometric method for simultaneous determination of pyrazinamide and rifampicin in cubosome formulation. Drug Anal. Res.; 2021; 5, pp. 46-50. [DOI: https://dx.doi.org/10.22456/2527-2616.111454]
128. Khamar, J.C.; Patel, S.A. Q-Absorbance Ratio spectrophotometric method for the simultaneous estimation of rifampicin and piperine in their combined capsule cosage. J. Appl. Pharm. Sci.; 2012; 2, pp. 137-141. [DOI: https://dx.doi.org/10.7324/JAPS.2012.2416]
129. Bhusari, S.S.; Waghmare, S.H.; Wakte, P.S. Development and validation of q-absorbance ratio spectrophotometric method for the simultaneous estimation of rifampicin and its bioenhancer; 3′, 5-dihydroxyflavone-7-o-β-d-galacturonide-4′-o-β-d-glucopyranoside; in bulk and formulation. J. Pharm. Sci. Innov.; 2019; 8, pp. 182-188. [DOI: https://dx.doi.org/10.7897/2277-4572.085152]
130. Youssef, R.M.; Maher, H.M. A new hybrid double divisor ratio spectra method for the analysis of ternary mixtures. Spectrochim. Acta Mol.; 2008; 70, pp. 1152-1166. [DOI: https://dx.doi.org/10.1016/j.saa.2007.10.049]
131. Lomillo, M.A.A.; Dominguez Renedo, O.; Arcos Martinez, M.J. Resolution of binary mixtures of rifamycin SV and rifampicin by UV/VIS spectroscopy and partial least-squares method (PLS). Chem. Biodiv.; 2004; 1, pp. 1336-1343. [DOI: https://dx.doi.org/10.1002/cbdv.200490096]
132. Stets, S.; Tavares, T.M.; Peralta-Zamora, P.G.; Pessoa, C.A.; Nagata, N. Simultaneous determination of rifampicin and isoniazid in urine and pharmaceutical formulations by multivariate visible spectrophotometry. J. Braz. Chem. Soc.; 2013; 24, pp. 1198-1205. [DOI: https://dx.doi.org/10.5935/0103-5053.20130154]
133. Shah, U.; Patel, S.; Raval, M.; Desai, P. Chemometric assisted spectrophotometric methods for the simultaneous determination of Rifampicin and Piperine in bulk and capsule. Indian J. Pharm. Educ. Res.; 2015; 49, pp. 200-207. [DOI: https://dx.doi.org/10.5530/ijper.49.3.5]
134. Espinosa-Mansilla, A.; Acedo Valenzuela, M.I.; Muñoz de la Peña, A.; Salinas, F.; Cañada Cañada, F. Comparative study of partial least squares and a modification of hybrid linear analysis calibration in the simultaneous spectrophotometric determination of rifampicin, pyrazinamide and isoniazid. Anal. Chim. Acta; 2001; 427, pp. 129-136. [DOI: https://dx.doi.org/10.1016/S0003-2670(00)01195-8]
135. Mariappan, T.T.; Jindal, K.C.; Singh, S. Overestimation of rifampicin during colorimetric analysis of anti-tuberculosis products containing isoniazid due to formation of isonicotinyl hydrazone. J. Pharm. Biomed. Anal.; 2004; 36, pp. 905-908. [DOI: https://dx.doi.org/10.1016/j.jpba.2004.08.005]
136. Khan, M.F.; Rita, S.A.; Kayser, M.S.; Islam, M.S.; Asad, S.; Bin Rashid, R.; Bari, M.A.; Rahman, M.M.; Al Aman, D.A.A.; Setu, N.I. et al. Theoretically guided analytical method development and validation for the estimation of rifampicin in a mixture of isoniazid and pyrazinamide by UV spectrophotometer. Front. Chem.; 2017; 5, 27. [DOI: https://dx.doi.org/10.3389/fchem.2017.00027] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/28503547]
137. Khan, A.U.; Shah, F.; Khan, R.A.; Ismail, B.; Khan, A.M.; Muhammad, H. Preconcentration of rifampicin prior to its efficient spectroscopic determination in the wastewater samples based on a nonionic surfactant. Turk. J. Chem.; 2021; 45, pp. 1201-1209. [DOI: https://dx.doi.org/10.3906/kim-2102-28] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/34707444]
138. Barsoum, N.B.; Kamel, M.S.; Diab, M.M.A. Spectrophotometric determination of isoniazid and rifampicin from pharmaceutical preparations and biological fluids. Res. J. Agric. Biol. Sci.; 2008; 4, pp. 471-484.
139. Sadeghi, S.; Karimi, E. Spectrophotometric determination of rifampicin through chelate formation and charge transfer complexation in pharmaceutical preparation and biological fluids. Chem. Pharm. Bull.; 2006; 54, pp. 1107-1112. [DOI: https://dx.doi.org/10.1248/cpb.54.1107] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/16880653]
140. Swamy, N.; Basavaiah, K. Spectrophotometric determination of rifampicin in bulk drug and pharmaceutical formulations based on redox and complexation reactions. J. Appl. Spectrosc.; 2017; 84, pp. 694-703. [DOI: https://dx.doi.org/10.1007/s10812-017-0532-1]
141. Swamy, N.; Basavalah, K.; Vamsikrishna, P. Stability-indicating UV-spectrophotometric assay of rifampycin. Insight Pharm. Sci.; 2018; 8, pp. 1-12. [DOI: https://dx.doi.org/10.5567/IPHARMA-IK.2018.1.12]
142. Tanasă, I.D.; Bulgariu, A.E.; Siriţeanu, C.; Bulgariu, L. Spectrophotometric determination of rifampicin in aqueous solution. Bul. Inst. Politeh. Iaşi.; 2022; 68, pp. 25-34.
143. Divakar, T.E.; Sunitha, S.; Deepthi, G.K.; Benzamin, T.; Babu, N.P. Assay of rifampicin in bulk and its dosage forms by visible spectrophotometry using chloranilic acid. Int. J. Chem. Environ. Pharm. Res.; 2012; 3, pp. 64-67.
144. Lutfullah,; Sharma, S.; Rahman, N.; Azmi, S.N.H. Spectrophotometric determination of U(VI) with rifampicin in soil samples. J. Chin. Chem. Soc.; 2011; 58, pp. 127-135. [DOI: https://dx.doi.org/10.1002/jccs.201190068]
145. Teng, L.S.; Wang, D.; Song, J.; Zhang, Y.B.; Guo, W.L.; Teng, L.R. Application of near infrared spectroscopy in rapid and simultaneous determination of essential components in five varieties of anti-tuberculosis tablets. Guang Pu Xue Yu Guang Pu Fen Xi; 2008; 28, pp. 1814-1818. [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/18975810]
146. de Oliveira Neves, A.C.; Soares, G.M.; Cavalcante de Morais, S.; da Costa, F.S.L.; Porto, D.L.; Gomes de Lima, K.M. Dissolution testing of isoniazid, rifampicin, pyrazinamide and ethambutol tablets using near-infrared spectroscopy (NIRS) and multivariate calibration. J. Pharm. Biomed. Anal.; 2012; 57, pp. 115-119. [DOI: https://dx.doi.org/10.1016/j.jpba.2011.08.029] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/21908131]
147. Chellini, P.R.; Mendes, T.O.; Franco, P.H.C.; Porto, B.L.S.; Tippavajhala, V.K.; César, I.C.; Oliveira, M.A.L.; Pianetti, G.A. Simultaneous determination of rifampicin, isoniazid, pyrazinamide and ethambutol in 4-FDC tablet by Raman spectroscopy associated to chemometric approach. Vib. Spectrosc.; 2017; 90, pp. 14-20. [DOI: https://dx.doi.org/10.1016/j.vibspec.2017.03.001]
148. Liu, Z.; Yin, P.; Gong, H.; Li, P.; Wang, X.; He, Y. Determination of rifampicin based on fluorescence quenching of GSH capped CdTe/ZnS QDs. J. Lumin.; 2012; 132, pp. 2484-2488. [DOI: https://dx.doi.org/10.1016/j.jlumin.2012.03.072]
149. Hooshyar, Z.; Bardajee, G.R. Fluorescence enhancement of glutathione capped CdTe/ZnS quantum dots by embedding into cationic starch for sensitive detection of rifampicin. Spectrochim. Acta Part; 2017; 173, pp. 144-150. [DOI: https://dx.doi.org/10.1016/j.saa.2016.09.006]
150. Chen, X.B.; Kang, D.G.; Li, S.; Zhao, C.Y.; Chen, X.S.; Ding, H.P. Fluorescence spectroscopy study of human serum albumin quenched by rifampicin capsules. Guang Pu Xue Yu Guang Pu Fen Xi; 2006; 26, pp. 674-677.
151. Tan, N.-D.; Yin, J.-H.; Yuan, Y.; Meng, L.; Xu, N. One-pot hydrothermal synthesis of highly fluorescent polyethyleneimine-capped copper nanoclusters for specific detection of rifampicin. Bull. Korean Chem. Soc.; 2018; 39, pp. 657-664. [DOI: https://dx.doi.org/10.1002/bkcs.11449]
152. Zhang, Y.; Deng, Q.; Tang, C.; Zhang, M.; Huang, Z.; Cai, Z. Fluorescent folic acid-capped copper nanoclusters for the determination of rifampicin based on inner filter effect. Spectrochim. Acta A Mol.; 2023; 286, 121944. [DOI: https://dx.doi.org/10.1016/j.saa.2022.121944]
153. Wu, X.-M.; Zhang, J.-H.; Feng, Z.-S.; Chen, W.-X.; Zhang, F.; Li, Y. An ultra-sensitive “turn-off” fluorescent sensor for the trace detection of rifampicin based on glutathione-stabilized copper nanoclusters. Analyst; 2020; 145, pp. 1227-1235. [DOI: https://dx.doi.org/10.1039/C9AN01994D]
154. Su, J.; Xiang, X.; Lv, R.; Li, H.; Fu, X.; Yang, B.; Gu, W.; Liu, X. Rapid and high-selectivity detection of rifampicin based on upconversion luminescence core-shell structure composites. J. Solid State Chem.; 2018; 266, pp. 9-15. [DOI: https://dx.doi.org/10.1016/j.jssc.2018.05.003]
155. Li, Y.; Mou, C.; Xie, Z.; Zheng, M. Carbon dots embedded hydrogel spheres for sensing and removing rifampicin. Dyes. Pigm.; 2022; 198, 110023. [DOI: https://dx.doi.org/10.1016/j.dyepig.2021.110023]
156. Trousil, J.; Filippov, S.K.; Hrubý, M.; Mazel, T.; Syrová, Z.; Cmarko, D.; Svidenská, S.; Matějková, J.; Kováčik, L.; Porsch, B. et al. System with embedded drug release and nanoparticle degradation sensor showing efficient rifampicin delivery into macrophages. Nanomed. Nanotechnol. Biol. Med.; 2017; 13, pp. 307-315. [DOI: https://dx.doi.org/10.1016/j.nano.2016.08.031]
157. Ma, H.-Y.; Zheng, X.-W.; Zhang, Z.-J. Flow-injection electrochemiluminescence detecting rifampicin based on its sensitizing effect. Chin. J. Chem.; 2004; 22, pp. 279-282. [DOI: https://dx.doi.org/10.1002/cjoc.20040220314]
158. Le-Deygen, I.M.; Safronova, A.S.; Mamaeva, P.V.; Kolmogorov, I.M.; Skuredina, A.A.; Kudryashova, E.V. Drug–membrane interaction as revealed by spectroscopic methods: The role of drug structure in the example of rifampicin, levofloxacin and rapamycin. Biophysica; 2022; 2, pp. 353-365. [DOI: https://dx.doi.org/10.3390/biophysica2040032]
159. Alsultan, A.; Peloquin, C.A. Therapeutic drug monitoring in the treatment of tuberculosis: An update. Drugs; 2014; 74, pp. 839-854. [DOI: https://dx.doi.org/10.1007/s40265-014-0222-8] [PubMed: https://www.ncbi.nlm.nih.gov/pubmed/24846578]
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.
Details
; Jinga, Maria Lorena 2
; Popa, Dana Elena 2 ; Buleandra, Mihaela 2 ; Iorgulescu, Emilia Elena 2
; Ciobanu, Adela Magdalena 3
1 Department of Surgery, Faculty of Medicine, “Lucian Blaga” University Sibiu, Lucian Blaga Street 25, 550169 Sibiu, Romania
2 Department of Analytical Chemistry and Physical Chemistry, Faculty of Chemistry, University of Bucharest, Panduri Av. 90-92, District 5, 050663 Bucharest, Romania
3 Department of Psychiatry “Prof. Dr. Al. Obregia” Clinical Hospital of Psychiatry, Berceni Av. 10, District 4, 041914 Bucharest, Romania; Discipline of Psychiatry, Neurosciences Department, Faculty of Medicine, “Carol Davila” University of Medicine and Pharmacy, Dionisie Lupu Street 37, 020021 Bucharest, Romania