Content area
Abrasive waterjet (AWJ) machining offers the possibility of creating a wide range of features on mechanical parts with different degrees of complexity with a relatively high efficiency. However, after the roughing passes, the surface quality of features such as blind pockets is rather low, with unfavorable implications for surface waviness and form deviations apart from high surface roughness. Apart from the traditional methods for finishing, such as grinding or lapping, it is worth attempting either to improve the surface quality obtained during roughing by an AWJ or to integrate a post-processing step by using a pure WJ in the existing process in order to ameliorate the surface quality. Thus, in the current study, the effect of pure waterjet (WJ) post-processing of machined pockets by AWJ milling on a Ti-6Al-4V workpiece using recycled glass beads was investigated under different conditions. The findings indicate that although the different post-processing treatments by a pure WJ can affect the surface quality on average, these differences are not considerably important, probably due to an insufficient capability of material removal, which hinders the smoothing effect on machined surfaces. Thus, it was indicated that a higher number of post-processing passes under different conditions than those of the roughing pass can be more favorable for efficient post-treatment by a pure WJ.
