Content area
The coupling effects of electrical pulse, temperature, strain rate, and strain on the flow behavior and plasticity of 7075-T6 aluminum alloy were investigated and characterized. The isothermal tensile test and electrically assisted isothermal tensile test were performed at the same temperature, and the typical models were further embedded in ABAQUS for numerical simulation to illustrate the electroplastic effect. The results showed that electrical pulses reduced deformation resistance but greatly increased elongation. Compared with the traditional Johnson–Cook model, the proposed modified electroplasticity constitutive equations have a certain improvement in calibration accuracy for a highly nonlinear and thermoelectric coupling dynamic behavior. Moreover, combined with the electrically assisted three-point bending experiment, it was found that the springback angle decreases with the increase in current density. This is very close to the experimental result, further verifying the effectiveness of the thermoelectric coupling constitutive equation.
Details
Strain rate;
Silicon nitride;
Simulation;
Software;
Tensile tests;
Accuracy;
Constitutive relationships;
Rheology;
Metal forming;
Thermoelectricity;
Temperature;
Constitutive equations;
Aluminum alloys;
Deformation effects;
Power supply;
Deformation;
Electric currents;
Alloys;
Deformation resistance;
Aluminum base alloys;
Shear strength;
Springback;
Coupling
