Content area
Recently we studied a collocation–quadrature method in weighted
1. Introduction
In [1], a collocation–quadrature method is studied in weighted spaces as well as in the space of continuous functions for a Volterra-like integral equation of the form
where (with a possible singularity at ) and are given (in general complex-valued) functions, and is a fixed parameter (see [1], Section 3.2). Here, we are interested in the numerical solution of Volterra integral equations of the second kind,(1)
where the functions and with are given. In particular, we prefer global polynomials as ansatz functions for the approximating solution and the application of Gaussian rules for the approximation of the integral operator. We do this with the aim not to restrict the convergence rate of the method by taking piecewise polynomials of fixed degree. As a consequence, the convergence rate of the method is only bounded by the smoothness of the given data andThe following result (see Lemma 1) on the solvability of (1) is well known and very special for Volterra integral equations of the above type. The space of continuous functions is denoted by and equipped with the infinity norm , making a Banach space.
Equation (1) is written in operator form as
(2)
where and denote the identity and the integral operator(3)
respectively. In particular, the special case of Volterra convolution equations is of interest, where the kernel function of the integral operator is of the form with a given continuous function(4)
Often the kernel function of the integral operator is not continuous but weakly singular along the line of triangle That is why, in what follows, we consider a kernel function of the form with a continuous function or, in case of the convolution equation, of the form (i.e., ) with a continuous function where is a given real number. The respective integral operator is denoted by i.e.,
(5)
The corresponding integral Equations (1) and (4) are written as
(6)
The remainder of this paper is organized as follows: In Section 2 we collect a series of mapping properties of the above-mentioned integral operators in weighted spaces as well as in the space of continuous functions. In Section 3 we describe the collocation–quadrature method, study its stability and convergence, and prove convergence rates for the approximate solutions. In Section 4 we answer the question under which conditions it is possible to apply the famous Nyström method (see, for example, [2], Chapter 4, and [3], Section 12.2) together with the theory of collectively compact operator sequences to the Volterra integral equations under consideration. We will see that from a theoretical point of view (concerning stability and convergence rates) the collocation–quadrature method outperforms the Nyström method. The present paper concentrates on these theoretical issues. The discussion of computational aspects of the proposed collocation–quadrature method is reserved for forthcoming studies.
2. Mapping Properties of the Involved Integral Operators
From ([3], Theorems 3.10 and 10.17), we infer the following Lemma. denotes the closure of the set .
If is continuous, then the linear operator is invertible, i.e., for every there exists a unique solution of (6).
In the following we try to extend this result to weighted spaces of continuous functions as well as weighted spaces of square integrable functions. First, we weaken the assumption on the kernel function in Lemma 3. Let denote the Jacobi weight function For we define the space as the set of all continuous functions such that belongs to i.e., for which the finite limits and exist. Equipped with the norm
becomes a Banach space. refers to the closed subspace of of all functions for whichObviously, the map is an isometric isomorphism. Thus, the operator is invertible if and only if the operator is invertible. Note that
(7)
Consequently, a simple conclusion of Lemma 1 is the following corollary:
If and the function is continuous, then for every Equation (6) has a unique solution
We continue to discuss the unique solvability in In comparison to the previous corollary, in the following lemma we weaken the condition on the kernel function part In what follows we assume that there are non-negative numbers such that the following condition (A) is fulfilled:
(A). The function is continuous.
Let condition (A) be satisfied, and take such that and Moreover, assume that
Then, for (6) has only the trivial solution in
With we have, for
(8)
By induction we prove that, for
(9)
where the constant does not depend on and Of course, this is true for with due to (8). Let (9) be true for some Then, using (8) again, we get where, using the substitutionThus, we obtain (9) for and Now, we choose such that Then, due to (9),
(10)
Let be a solution of the homogeneous equation Then, u is also a solution of , and, again by induction, we can prove
(11)
Indeed, from and (10) we see that (11) is true for If we assume that (11) is true for some then
We send n to infinity in (11) and conclude that for all □
For refers to the Hilbert space of all with respect to the Jacobi weight square integrable functions on the interval equipped with the inner product
and the normIn what follows, denotes a generic positive constant, which can assume different values in different places. Moreover, indicates that does not depend on Let denote the value
Assume that is continuous. Then, for and the operator is compact.
Let and Then, using the substitution
(12)
where the constant does not depend on Now, for we can estimateWe estimate these three terms separately. Firstly, we have
where, taking into account
Hence,
(13)
Secondly, let Then, there is an such that for all with Thus, for
Consequently,
(14)
Finally, we refer to the inequality (see [4], Chapter 1 (5.2))
(15)
and obtain with if In case of , we choose such that and Then, using the equality we getHence,
(16)
As a conclusion of the relations (12), (13), (14), and (16), the set is uniformly bounded and equicontinuous. It remains to refer to the Arzela–Ascoli theorem (see [2], Section 1.2.1). □If condition (A) is valid, then the operator is compact if
We can write where
and The mappings and are isometrical isomorphisms, and from Lemma 3, the operator is compact. Hence, is compact. □3. A Collocation–Quadrature Method for Equation (6)
3.1. The Method
We proceed with proposing a collocation–quadrature method for the numerical solution of the integral Equation (6). Note that the integral operator in this equation can be written in the form
(17)
To define an approximation of this operator, we use the Gaussian rule
(18)
with the error term where denotes the kth zero of the nth orthonormal polynomial with respect to the weight function and is the respective Christoffel number refers to the polynomial interpolation operator associated with the nodes i.e.,(19)
for every function Let refer to the set of continuous functions . Writing and applying the quadrature rule (18) to (17), we define the quadrature operator as(20)
As a possible approximation of the operator , we take the composed operator where denotes the orthonormal projector
and refers to the linear space of all algebraic polynomials of degree less than In other words, we are looking for an approximate solution of (6) by trying to solve the following equation:(21)
where is an approximation of f satisfying For example, if then we can choose (under certain conditions, see [5] Lemma 15 as well as the beginning of Section 3.2) In that case, (21) is equivalent toFrom the definition (20) of the operator , we have
Due to the algebraic accuracy of the Gaussian rule (18), for we get
Using this relation, we can try to extend the operator using linearity to a linear and bounded operator
(22)
For this we need the boundedness of the operator i.e., the existence of a constant such that
To find out under which conditions of the involved parameters we can guarantee the existence of such a constant, we assume that satisfies condition (A) and estimate for and
Thus, we can choose
if(23)
With definition (22) of every solution of Equation (21) belongs automatically to if3.2. Stability and Convergence
Analogously to and we define the sets and by replacing the space of continuous functions with the set of all functions being bounded and Riemann-integrable on each closed subinterval of the interval Moreover, for we set
Note thatLet us recall the following lemma ([5], Lemma 15):
Let and Then we have, for
if
and if
From Lemma 4 we infer that
(24)
if(25)
Since pointwise convergence becomes uniform on each compact subset, the compactness of the operator (see Corollary 2) implies the norm convergence(26)
if condition (25) is fulfilled for and For the proof of the next proposition, we need the following lemma (see [5], Lemma 16).Let and be satisfied. If the function
is continuous, then
Now, let us prove a first result on the stability and the convergence of the collocation–quadrature method (21). We have the following proposition:
Assume that the function satisfies condition (A) with
(27)
Let and with Furthermore, assume that
(28)
(29)
and(30)
(31)
Then, for all sufficiently large the collocation–quadrature Equation (21) has a unique solution tending to the unique solution of Equation (6) in the norm of the space if n tends to infinity.
Due to the last two inequalities in (27), the space is continuously embedded in Hence, from Corollary 2 (see the conditions in (28)), we infer that the operator is compact.
Let be a solution of the homogeneous equation Then, due to Corollary 2, belongs to and is identically zero due to Lemma 2 (see the first two conditions in (27)). Thus, the operator has a trivial null space. This, together with the compactness of and the Fredholm alternative, leads to the invertibility of the operator Thus, Equation (6) has a unique solution
Due to our assumptions we can use definition (22) of the operator (see (23) with (29) as well as the second and third inequalities in (27)). For every we have
where due to (24) (see (25) with (27), (30)), and the Banach–Steinhaus theorem. Now, we are going to prove that, for all(32)
For this, we again use the definition (22) of the operator and obtain, for every
(33)
where we have taken into account the estimate (note that due to (28) and (30))
(34)
Applying Lemma 5 for and , we get (32) with (see (31))
Together with (26) we obtain
(Here and in what follows, denotes the norm of the linear and bounded operator defined on the Banach space and mapping into the Banach space ) Now, a Neumann series argument shows that, for all sufficiently large n (say ), the operators are invertible and their inverses are uniformly bounded, i.e.,
(35)
which means that the method is stable.Let and be the unique solutions of Equations (6) and (21), respectively. Then,
(36)
Consequently, and the proof is finished. □In the following corollary we reformulate Proposition 1 for the case of and
Assume that the function is continuous. Let and with Assume that and Then, for all sufficiently large the collocation–quadrature equation
(37)
has a unique solution tending to the unique solution of Equation (6) in the norm of the space if n tends to infinity.3.3. Convergence Rates
To prove convergence rates we recall some estimates for the interpolation error. For this, we define the space of all functions which are times differentiable, and the -th derivative is absolutely continuous on denotes the usual space on the interval , For and all we have (see [6] (3.2.63))
(38)
if and only if where For we define the space where is the set of all absolutely continuous functions In the case and for and all we get(39)
if and only if(40)
We will restrict ourselves to the case and such that condition (40) is satisfied. Nevertheless, with the help of (39), analogous but more involved considerations are possible if and/or Thus, we assume that the conditions of Corollary 3 are in force. Then, due to (35) and (36),
(41)
Let us check which further conditions on the given data and are suitable to obtain convergence rates from estimate (41).
1.. Of course, the first addend in the brackets on the right-hand side in (41) can be estimated with the help of (39) by if we choose and assume that
2.. Let us consider the second addend. Due to (22), we can estimate by
where(see (34)). Hence, since (due to the assumptions in Corollary 3),
if(42)
This can be guaranteed if, for example, the function
(43)
is continuous, and(a).
Since with we have (42) if (43) is satisfied together with
(b). and (i.e., and ),
or
(c). and
or
(d). and
3.. For the last addend on the right-hand side of (41), we can again use (39) if we know that Assume that the functions
(44)
are continuous.(a). If , then, due to Lemma 3, the solution also belongs to Consequently, in view of
we have if (a non-negative integer) and (see (54)).(b). If (a positive integer), and then we can also conclude since the operator for maps into (see Lemma 1 and (54)).
Let us summarize the considerations in items 1 to 3 in the following proposition.
Assume that the conditions of Corollary 3 are valid. Let and denote the solutions of (6) and (37), respectively. Moreover, let and , and let the conditions (43) and (44) be fulfilled. Then, there is a constant such that
if one of conditions 2.(a)–2.(d) and one of conditions 3.(a)–3.(b) are additionally satisfied by the given data.We see that the case where (not prohibited in Corollary 3) does not fit the conditions of Proposition 2. That is why we consider that case separately. We assume which implies (see Lemma 1). Let and estimate
where, with the notationHence, if we assume that the function is uniformly Hölder-continuous in x with exponent with respect to i.e.,
(45)
then we have(46)
where denotes the space of Hölder-continuous functions on (with Hölder exponent ).For a function g satisfying for a Jacobi weight function and some we introduce the main part of the weighted modulus of smoothness:
where, forLet us recall the relation (see [7], Theorem 3.1)
(47)
which is true if and only if(48)
Note that, when condition (48) is equivalent to
(49)
Let and In additional to the conditions of Corollary 3, assume that holds uniformly with respect to (see (45)), the function is continuous, and Then, there is a constant such that, for all sufficiently large
where and are the unique solutions in of (37) and (6), respectively.
Due to the above considerations and our assumptions, we have Consequently, which follows directly from the definition of using When and , condition (49) is satisfied, so that from (47) we can infer
The same convergence rate is obtained for the first addend on the right-hand side of (41) since and are assumed.
It remains to estimate the second addend. For this, set Moreover, let and Then, from (22),
(50)
Since the solution is a continuous function, we have
if From (38) we conclude if and Thus, we have to show that and can be chosen in such a way that the norm can be bounded by a constantWe choose and so that and This is possible, since and The inequalities and ensure that and can be chosen in such a way that and Furthermore, we have
andFinally, since
and we have which finishes the proof of the corollary. □3.4. Uniform Convergence
In the previous sections, the studies were restricted to the case where The reason for this is the respective condition in Lemma 3, which is important for the proof of the stability of the collocation–quadrature method in the space (see the proof of Proposition 1). As one can see from Corollary 5, under certain conditions the operator is compact for That is why we studied the collocation–quadrature method (37) in the space, which allowed us to prove convergence rates in the infinity norm.
If and are two positive functions depending on certain parameters then we use the notion if there is a positive constant such that Let us recall the following classical result on the Lebesgue constant being the norm of the interpolation operator in the space.
([8], Theorem 14.4, p. 335). For all we have
Note that, for and every ,
Hence,(51)
where denotes the best approximation of f by polynomials in the infinity norm, We remember the following inequality (see [9], (2.5.22)):(52)
which is true for all satisfying and is a consequence of the iterated Favard inequality(53)
with In what follows we will assume that, for some(D). the functions are continuous.
If and then one can see by induction and
(54)
that belongs to if Moreover, there is a constant such that, for all and all(55)
For example, for and we can take
If we define the weighted modulus of smoothness as
where if then the following Lemma is true (see [10], Theorem 7.2.19):For and
In the following lemma we estimate the norm of the linear operator for certain constellations of the parameters and
Let satisfy condition (D) and Then, for all and
whereif and
if or and
if and
if and
Note that we can use definition (22) for the operator without further conditions like (23) in case of the space. As in (50) we have, for and
(56)
where andIf and then holds uniformly with respect to With and in (56), we obtain, due to (39),
and (a) is proven.If is a non-negative integer, and then with a continuous function We choose such that and which is possible because of Furthermore, we can choose such that (i.e., ) and which is possible since Finally, we have due to Consequently, from (38) we can infer
to obtain assertion (b).If for some and then where
From this we obtain
(57)
Indeed, from the mean value theorem, we have
where Hence, with as well as Consequently, Since we obtain by induction for some This leads to from which (57) follows.Now, choose a large enough such that and This is possible, since and Applying (47) yields
and the proof of (c) is finished.Assertion (d) can be proved analogously to (c). □
Assume that and that, for some the kernel function fulfills condition (D). Furthermore, assume that the right-hand side of (6) belongs to Moreover, let be chosen in such a way that one of the conditions (a)–(d) of Lemma 8 and the condition
(58)
with ρ defined in Lemma 8 are satisfied. Then, for all sufficiently large the collocation–quadrature Equation (37) has a unique solution which converges in the infinity norm to the unique solution of (6), where, for(59)
with a constantThe unique solvability of (6) in is guaranteed by Lemma 1. Now, our aim is to estimate
(60)
For the second addend on the right-hand side, we can use Lemma 6 and Lemma 8, while for the first addend we take into account and for all and (see (55)). Hence, due to (51) and (52),Thus, from (59) together with (58), we infer
which, in view of the invertibility of the operator and a standard Neumann series argument, implies the invertibility of for all sufficiently large say andSince from (54) and , we conclude By induction we obtain and, for
taking into account (51) and (52) as well as Lemma 8, together with This completes the proof. □Let and condition (D) be satisfied, where
for a certain number Moreover, let with Assume that the parameters fulfill one of the conditions (a)–(d) as well as condition (58). Then, for all sufficiently large the collocation–quadrature Equation (37) has a unique solution which converges in the infinity norm to the unique solution of (6), where, for(61)
with and a constantWe can proceed as in the proof for the previous proposition. We only have to check the estimate of Since from the proof of (46), we can infer where
(62)
This leads to where we took into account that, forAnalogously, we get Thus, as at the end of the proof of Proposition 3,
and the proposition is proved. □4. What About the Nyström Method?
In different papers the Nyström method was studied for Volterra integral equations (see, for example, [11,12,13,14,15,16] for linear equations and [17,18] for nonlinear equations).
Let us use the interpolation operator to construct a Nyström approximation for the solution of (6) based on a product integration rule, namely, (cf. [13], (6),(7))
(63)
withWith the aim of studying the Nyström method for Equation (6) in the weighted space of continuous functions, we multiply equation
(64)
by collocate at the points and take as the unknowns. This results in the following system:(65)
where Note that we obtain the same system (65) if we consider equation(66)
(see (7)) in the space of continuous functions on and approximate the operator byThat is why we will study (63) in the space assuming that is a continuous function.
We refer to the notation in ([6], Chapter 6) and consider an operator
with where is a fixed real number. For a function and we use the following notations (cf. the beginning of Section 2):Let us consider conditions (K1)–(K4) in ([6], p. 356) (cf. also [19]). The first condition is
(67)
We estimate(68)
where (also hereafter) and Note that, for and all the integral is finite if and only if(69)
Let us turn to the second condition:
(70)
Let Then,
Let us estimate these three terms separately. Analogously to (68) we get
where, for if(71)
For the second term we get
where, for if and only if(72)
Finally, we estimate the third term and obtain
where, for and (see also (15)) for if For we choose such that and again use the relation (15) to obtain if(73)
and is small enough.Note that (K1) and (K2) are necessary and sufficient for to be a compact operator (see [6], Proposition 5.3.2). Thus, by using (69), (71), (72), and (73), we obtain the following corollary:
The operator is compact if one of the following conditions is satisfied:
There exist numbers such that
and, for all
There exist numbers and such that, for
and, for all
The following two conditions (K3) and (K4) concern the question as to whether the operators form a collectively compact and strongly converging operator sequence. In particular, the following lemma is true (see [6], Lemma 6.1.1, cf. also [19], Section 2, Lemma and [20], Section 3, Theorem 1).
Suppose that the conditions (K1) and (K2) are in force. Then, the operators are collectively compact and strongly convergent to if and only if the conditions (K3) and (K4) below are satisfied.
Remembering the definition of (see (63)), we consider the third condition:
(74)
To obtain conditions under which (74) is fulfilled, we estimate
where, for some and all the integral is finite if and only if (compare with (69))(75)
Moreover, we have to find conditions under which
(76)
is true for all and for some Let us restrict to and try to apply Lemma 4. If we set we can replace condition (76) with(77)
Applying Lemma 4 when , we obtain the conditions
(78)
and, for some and all(79)
Let us turn to the last condition:
(80)
We represent in the form
where with and as well asLet and With the help of Lemma 4, we have
(81)
for all and For fixed with and define and equip the space with the norm It is easy to see that such that the Banach–Steinhaus theorem (principle of uniform boundedness), together with (81) implies, for all(82)
Considering as a linear map from into the dual space of and again applying the principle of uniform boundedness to (82), we get
Together with (82), this implies
(83)
We conclude
From the estimate of the terms and above (cf. (71) and (73)), we infer that, for
(84)
where if and (with some sufficiently small ) if supposing that and (Note that it is possible to weaken the conditions on the parameters if we use a respective weighted -space, instead of the space ) Relation (84) implies(85)
if the conditions on the parameters are fulfilled. The most critical question is under which conditions the limit relation(86)
is true. Let us assume that the function is continuous. Since, for we get i.e., we can obtain (86) only if(87)
As an example, let us consider the situation where the function is continuous, and we choose Then condition (A) of Corollary 5 is satisfied for Also, (76) and (85) hold true. Note that (85) was above proven for But, as already mentioned in the brackets after (85), this condition can be weakened to in the present situation. Thus, to be able to apply the theory of collectively compact operator sequences, due to (87), we have to assume that for all
If is the solution of (65) (when ) and
is the respective Nyström interpolant, then we have the error estimate (see [3], Theorem 10.9)In order to obtain the convergence rates from this estimate, it is necessary to assume smoothness properties of the function
while for the collocation–quadrature method studied in Section 3, only smoothness properties of the function are needed (see condition (D)).5. Conclusions
From a theoretical point of view, concerning stability and convergence, the collocation– quadrature method is better than the Nyström method, since the latter requires additional conditions on the kernel function (see (87)). But, at first glance the collocation–quadrature method is more expensive (i.e., has a higher computational complexity) than the Nyström method. The speed (and cost) of the collocation–quadrature method must be examined in future studies.
The original contributions presented in this study are included in this article. Further inquiries can be directed to the author.
The author declares no conflict of interest.
Footnotes
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
1. Junghanns, P.; Knoth, S. On Volterra like integral equations coming from statistical process monitoring. Math. Control Related Fields; 2025; in print [DOI: https://dx.doi.org/10.3934/mcrf.2025017]
2. Atkinson, K.E. The Numerical Solution of Integral Equations of the Second Kind; Cambridge Monographs on Applied and Computational Mathematics; Cambridge University Press: Cambridge, UK, 1997; Volume 4.
3. Kress, R. Linear integral equations. Applied Mathematical Sciences; 3rd ed. Springer: New York, NY, USA, 2014; Volume 82.
4. Muskhelishvili, N.I. Singular Integral Equations. Boundary Problems of Function Theory and Their Application to Mathematical Physics; Radok, J.R.M. Wolters-Noordhoff Publishing: Groningen, The Netherlands, 1953.
5. Junghanns, P.; Kaiser, R. Quadrature methods for singular integral equations of Mellin type based on the zeros of classical Jacobi polynomials. Axioms; 2023; 12, 55. [DOI: https://dx.doi.org/10.3390/axioms12010055]
6. Junghanns, P.; Mastroianni, G.; Notarangelo, I. Weighted Polynomial Approximation and Numerical Methods for Integral Equations; Pathways in Mathematics Birkhäuser: Basel, Switzerland, Springer: Cham, Switzerland, 2021.
7. Mastroianni, G.; Russo, M.G. Lagrange interpolation in weighted Besov spaces. Constr. Approx.; 1999; 15, pp. 257-289. [DOI: https://dx.doi.org/10.1007/s003659900107]
8. Szegő, G. Orthogonal Polynomials; 4th ed. Colloquium Publications; American Mathematical Society: Providence, RI, USA, 1975; Volume XXIII.
9. Mastroianni, G.; Milovanović, G.V. Interpolation Processes: Basic Theory and Applications; Springer Monographs in Mathematics; Springer: Berlin/Heidelberg, Germany, 2008.
10. Ditzian, Z.; Totik, V. Moduli of Smoothness; Springer Series in Computational Mathematics; Springer: New York, NY, USA, 1987; Volume 9.
11. Baratella, P. A Nyström interpolant for some weakly singular linear Volterra integral equations. J. Comput. Appl. Math.; 2009; 231, pp. 725-734. [DOI: https://dx.doi.org/10.1016/j.cam.2009.04.007]
12. Fermo, L.; Mezzanotte, D.; Occorsio, D. On the numerical solution of Volterra integral equations on equispaced nodes. Electron. Trans. Numer. Anal.; 2023; 59, pp. 9-23. [DOI: https://dx.doi.org/10.1553/etna_vol59s9]
13. Fermo, L.; Occorsio, D. Weakly singular linear Volterra integral equations: A Nyström method in weighted spaces of continuous functions. J. Comput. Appl. Math.; 2022; 406, 114001. [DOI: https://dx.doi.org/10.1016/j.cam.2021.114001]
14. Han, G.Q. Asymptotic error expansion for the Nyström method of nonlinear Volterra integral equation of the second kind. J. Comput. Math.; 1994; 12, pp. 31-35.
15. Ma, Z.; Stynes, M. A Nyström method based on product integration for weakly singular Volterra integral equations with variable exponent. J. Comput. Appl. Math.; 2025; 454, 116164. [DOI: https://dx.doi.org/10.1016/j.cam.2024.116164]
16. Okayama, T.; Matsuo, T.; Sugihara, M. Theoretical analysis of sinc-Nyström methods for Volterra integral equations. Math. Comp.; 2015; 84, pp. 1189-1215. [DOI: https://dx.doi.org/10.1090/S0025-5718-2014-02929-3]
17. Baratella, P. A Nyström interpolant for some weakly singular nonlinear Volterra integral equations. J. Comput. Appl. Math.; 2013; 23, pp. 542-555. [DOI: https://dx.doi.org/10.1016/j.cam.2012.06.024]
18. Han, G.Q. Asymptotic error expansion for the Nyström method for a nonlinear Volterra-Fredholm integral equation. J. Comput. Appl. Math.; 1995; 59, pp. 49-59. [DOI: https://dx.doi.org/10.1016/0377-0427(94)00021-r]
19. Sloan, I.H. Analysis of general quadrature methods for integral equations of the second kind. Numer. Math.; 1981; 38, pp. 263-278. [DOI: https://dx.doi.org/10.1007/BF01397095]
20. Sloan, I.H. Quadrature methods for integral equations of the second kind over infinite intervals. Math. Comp.; 1981; 36, pp. 511-523. [DOI: https://dx.doi.org/10.1090/S0025-5718-1981-0606510-2]
© 2025 by the author. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.