Content area

Abstract

Hydrologists need to predict extreme hydrological and meteorological events for design purposes, whose magnitude and probability are estimated using a probability distribution function (PDF). The choice of an appropriate PDF is crucial in describing the behavior of the phenomenon and the predictions can differ significantly depending on the PDF. So, the success of the probability distribution function in representing the data of extreme value series of natural events such as hydrology and climatology is of great importance. Depending on whether the series consists of maximum or minimum values, the theoretical probability density function must be appropriately fit to the right or left tail of the extreme data, which contains the most critical information. This study includes a combined evaluation of the performance of four different tests for selecting the appropriate probability distribution of maximum rainfall in Türkiye: Kolmogorov–Smirnov (KS) test, Anderson–Darling (AD) test, Probability Plot Correlation Coefficient (PPCC) test, and L-Moments ZDIST test. Within the scope of the study, maximum rainfall series of seven rainfall durations from 15 to 1440 min, at rain gauge stations in 81 provinces of Türkiye, were examined. Goodness of fit was performed based on ranking using a combination of four different numerical tests (KS, AD, PPCC, ZDIST). The probabilistic character of maximum rainfall was evaluated using a large dataset consisting of 567 time series with record lengths ranging from 45 to 80 years. The goodness of fit of distributions was examined from three different perspectives. The first is an examination considering rainfall durations, the second is a province-based examination, and the third is a general country-based assessment. In all three different perspectives, the Wakeby distribution was determined as the best fit candidate to represent the maximum rainfall in Türkiye.

Full text

Turn on search term navigation

1. Introduction

Changes in the conditions in the atmosphere, specifically increases in greenhouse gases, have undesirably affected the weather and climate of our planet in recent decades. According to the Sixth Assessment (AR6) Report of the Intergovernmental Panel on Climate Change [1], “human-caused greenhouse gas emissions have led to an increased frequency and/or intensity of some weather, and climate extremes since pre-industrial times.” Frequency analysis is the most powerful scientific method for estimating the intensity and frequency of hydrological and climatic extremes. Maximum rainfall estimates obtained for certain frequencies or return periods by frequency analysis are significant project criteria in the planning of rainwater network projects, flood protection structures, drainage channels, and some other infrastructure projects such as culverts and bridges, and are also of great importance in erosion analysis.

The first and most important step of frequency analysis is to correctly determine the probability distribution function (PDF) representing the behavior of the relevant hydrological and/or meteorological phenomenon. Thus, a solid basis for future predictions of the studied phenomenon is established. Two important steps should be followed at this stage. First, potential probability distributions that are expected to successfully represent the phenomenon under study should be carefully listed, considering previous experience. The second step is to choose the best fit distribution among the PDFs considered. Rainwater network projects, flood protection structures, drainage channels, and infrastructure projects such as culverts and bridges are designed according to extreme rainfall events whose magnitude and probability are estimated using a PDF. The results may vary considerably from one distribution to another, impacting the design and size of the structure. Overestimation of the design event increases construction and maintenance costs, while underestimation may result in loss of properties and human lives [2,3]. For these reasons, the selection of an appropriate PDF is a matter of great importance.

Many probability distributions have been proposed for representing the distribution of hydrologic and climatic extremes [4,5,6,7,8,9]; however, there is still no general agreement as to which distribution(s) should be used. The most frequently used distributions in hydrological and meteorological frequency analysis are Normal, (N), 2-parameter Lognormal (LN2), 3-parameter Lognormal (LN3), 2-parameter Gamma (GAM), Pearson Type III (PE3), Log Pearson Type III (LP3), Generalized Logistic (GLO), Generalized Pareto (GPA), Gumbel (GUM), generalized extreme value (GEV), and 5-parameter Wakeby (WAK) distributions [7].

The choice of probability distribution function for the frequency analysis of extremes depends on several dynamics, including previous experiences, knowledge of the modeler, national practice, objective of the study, data accessibility, and governmental necessities [9,10]. The national guidelines of different countries recommend the use of different distributions. For instance, Log-Pearson 3 has been recommended in the US in Bulletin 17B [11]. The generalized extreme value (GEV) distribution and LP3 are recommended in Australia [12]. GEV distribution is also a recommended choice in many other countries in Europe, including Austria, Germany, Italy, and Spain [9]. However, many other distributions have also been used popularly, including the Gumbel (GUM) distribution in Finland and Spain, and the Generalized Logistic (GLO) distribution in the UK [9]. Moreover, in Slovenia, the Agency of Environment recommends the use of five distribution models (i.e., N, LN, PE3, LP3, and GUM); Slovakia often uses the GAM, LN3, LP3, and GEV distributions. In Canada, the use of a specific distribution is not compulsory; however, LP3, LN3, GEV, and GUM have been used popularly [13,14,15,16]. Environment Canada currently uses GUM to construct at-site IDF curves for all stations in Canada [17]. This distribution is also recommended for the development of rainfall IDF relations by the Canadian Standard Association [18].

The common method for selecting a proper probability model is mainly based on the best fit of the model to the observed data and the best fit selection approach depends strongly on the characteristics of the existing rainfall record at a given site [19,20,21]. Various methods have been used in the literature to determine the most appropriate probability distribution model for maximum rainfall. Statistical tests (i.e., Kolmogorov–Smirnov, Anderson–Darling, Chi-square, root mean square error (RMSE), Probability Plot Correlation Coefficient tests (PPCC)), L-Moment’s ZDIST test, criteria (i.e., AIC, BIC, and ADC), and graphical tests (i.e., product moment ratio and L-Moment ratio diagrams, Q-Q plot) are the most commonly used techniques for PDF selection.

Studies on the determination of maximum rainfall of a specific return period constitute a significant study area of hydrology and meteorology. For this purpose, the frequency analysis and therefore the best fit distribution analysis of maximum rainfall have been the subject of several studies in Türkiye and at the global scale. Some of the recent studies focused on frequency analysis and estimation of maximum rainfall [15,16,22,23,24,25,26,27,28,29] while others focused more on the selection of the PDF that best fits the maximum rainfall [3,15,16,21,27,30,31,32,33,34,35,36].

Case studies dealing with the determination of the statistical and probabilistic characterization of extreme rainfall over Türkiye are numerous, but they usually focus on certain parts of the country or consider only the maximum rainfall for a certain duration (e.g., 1 h or 24 h) [28,37,38]. To our knowledge, this is the first contribution that investigates the probabilistic characteristics of annual maximum rainfall both across the country and for various rainfall durations.

In this study, the 3-parameter versions of the 2- and 3-parameter distributions were preferred (LN3 instead of LN2, PE3 instead of Gamma, and GEV instead of GUM). In addition, NOR, GLO, GPA, LP3, and WAK probability distribution functions were taken into account. Goodness of fit was evaluated with a ranking-based methodology using a combination of four different numerical tests (KS, AD, PPCC, ZDIST). The procedure was performed with the maximum rainfall data obtained from meteorological stations in 81 provinces of Türkiye for seven different durations (15 min, 30 min, 1 h, 3 h, 6 h, 12 h, and 24 h). The data, study area, and methodology are presented in Section 2, followed by results in Section 3, discussions in Section 4, and conclusions in Section 5.

2. Materials and Methods

2.1. Study Area

Türkiye is situated at the crossroads of Europe and Asia, spanning the Anatolian Peninsula and the Thrace region in the northern hemisphere. Geographically, it extends between 36° and 42° north latitudes and 26° to 45° east longitudes. The country is bordered by three major seas: the Mediterranean to the south, the Aegean to the west, and the Black Sea to the north. This unique geographical setting contributes to the country’s remarkable climatic diversity.

The total area of Türkiye is approximately 780,000 km2, and the national average annual rainfall is around 643 mm. However, the climate across Türkiye is far from uniform. Due to its varied topography and location, the country encompasses a broad range of climate types. In general, four main climate zones can be identified: the Black Sea climate in the north, with rainfall throughout the year; the Mediterranean climate in the west and south, characterized by hot, dry summers and mild, wet winters; a semi-arid steppe climate in Central and Southeastern Anatolia; and a harsh continental climate in the Eastern Anatolia region, with cold, snowy winters and relatively dry, long summers.

Reflecting this climatic complexity, Türkiye is divided into seven geographical regions, primarily based on climatic characteristics: Marmara, Aegean, Mediterranean, Southeastern Anatolia, Eastern Anatolia, Black Sea, and Central (or Inland) Anatolia. Each region exhibits distinct climatic features.

The Marmara region, located in the northwest, has a climate similar to the Balkans—humid and mild in summer, with cold winters that bring higher-than-average precipitation, often as snow. The Aegean region features a classic Mediterranean climate along the coast, while inland areas become cooler in winter, especially at higher elevations where snowfall is more common.

In the Mediterranean region, the Taurus Mountains stretch parallel to the coastline, typically 40–50 km inland. These mountains significantly influence local climate patterns, especially by enhancing orographic rainfall on their windward slopes. The region experiences hot, humid summers and mild, rainy winters.

Southeastern Anatolia is characterized by a semi-arid climate, with hot, dry summers and mild winters. Precipitation here is generally below the national average. Eastern Anatolia, on the other hand, is mountainous and known for its severe winters with abundant snowfall and rainfall, followed by dry, prolonged summers.

In the north, the Black Sea region features another set of coastal mountain ranges running parallel to the sea. These mountains create a barrier effect, resulting in year-round orographic rainfall on their windward sides. This region records the highest annual rainfall in the country, nearly double the national average.

Finally, the Central Anatolia region, enclosed by high mountain ranges to both the north (Black Sea) and south (Mediterranean), exhibits a continental climate with hot, dry summers and cold winters. Due to limited moisture intrusion, annual rainfall here remains below the national means.

2.2. Meteorological Data Used in Study

Meteorology services of countries use different standard duration rainfalls obtained from continuous rainfall records. The General Directorate of Meteorology (known as MGM) in Türkiye produces a record of annual maximum rainfalls using the overlapping moving window for 14 standard durations (5, 10, 15, 30 min, 1, 2, 3, 4, 5, 6, 8, 12, 18, and 24 h). In this study the AMR series of 7 standard durations (15, 30 min, 1, 3, 6, 12, and 24 h) are obtained from MGM, which have been measured since 1938 [38]. Data from the meteorological stations of 81 cities were used in the study, and the quality of the data, the sufficient length of rainfall records (at least 35 years), and the spatial distribution of the stations to represent different climatic conditions across the country were taken into consideration. A total of 567 extreme datasets (81 stations × 7 durations) were examined. The list of stations and their geographical location and measurement period are given in Appendix A (Table A1). The distribution of meteorological stations across the country is given in the map in Figure 1.

2.3. Probability Distributions Considered

Frequency analysis is the most important tool used by hydrologists and meteorologists when rainfall projections are made in relation to a specific return period or frequency in the design of water structures and especially rainwater drainage systems; in the risk analysis of natural events such as floods and landslides; and in the analysis of droughts and climate change, which have become increasingly important in recent decades. In the frequency analysis of extreme rainfall events, the probability distributions that best represent the characteristics of maximum rainfall data of various standard durations (5, 10, …, 30 min, 1 h, 2 h, …, 24 h) can be determined using theoretical probability distribution functions such as generalized extreme value (GEV) [39,40,41], Pearson type III (PE3) [21,42], Lognormal (LN) [27,37,43], Log-Pearson type III (LP3) [25,36,44], Generalized Logistic (GLO) [38,45], Wakeby (WAK) [46,47,48,49], Normal (NOR) [38,45], and Generalized Pareto distribution (GPA) [50,51].

In the study, the 3-parameter versions of the 2- and 3-parameter distributions were preferred (LN3 instead of LN2, PE3 instead of Gamma, and GEV instead of GUM). Thus, the PE3, GLO, GEV, LN3, LP3, NOR, GPA, and WAK probability distribution functions were considered in accordance with the studies of maximum rainfall in the literature.

Table 1 shows the theoretical probability density function fx of the random variable (x, here corresponding to maximum rainfall) and the parameters of the 8 probability distributions considered in the study [7]

2.4. Methods for Selecting the Best Fit Distributions

There are many numerical tests in the literature that are based on different principles for testing the suitability of probability distributions. The comprehensive literature review we provided in the Section 4 discusses numerous goodness of fit tests. The most commonly used of these are the Kolmogorov–Smirnov, Anderson–Darling, and X2 tests. Furthermore, the ZDIST statistic, proposed in the L-Moment’s frequency analysis procedure, is also frequently used. There are other methods that compare data obtained from empirical probabilities with data from theoretical probabilities of distributions (Q-Q plots, RMSE, RRMSE, MAE, CC, PPCC, BIAS, etc.).

The Chi-square test was not considered due to its drawbacks, such as being sensitive to the number of classes and boundaries, being overly sensitive in large samples, and losing the detailed structure of the original distribution during classification. The methods (Q-Q plots, RMSE, RRMSE, MAE, CC, PPCC, BIAS, etc.) that compare data derived from empirical probabilities with data derived from theoretical probabilities of relevant distributions yield results representing the same idea. So, PPCC was selected to represent this category.

Thus, AD, KS, PPCC, and the L-Moment goodness of fit statistic (ZDIST) were included in the analyses.

2.4.1. Kolmogorov–Smirnov (K-S) Test

The Kolmogorov–Smirnov (K-S) test is a widely used non-parametric method for assessing the goodness of fit between observed hydrological data and a theoretical probability distribution. The K-S test compares the empirical cumulative distribution function F*xi of the sample with the theoretical cumulative distribution function F(xi), calculating the maximum absolute difference between them. The test statistic is defined as follows:

(1)Δmax = maxF*xiFxi

The computed Δmax value is compared against critical values Δα of the probability distributions based on sample size and a chosen significance level. If Δmax > Δα, the null hypothesis is rejected, indicating that the observed data do not follow the specified theoretical distribution [52].

2.4.2. Anderson–Darling (A-D) Test

The Anderson–Darling (A-D) test is a powerful non-parametric goodness of fit method used to evaluate the fitness of a theoretical distribution to the observed data. It is similar to the K-S test but is particularly more sensitive to deviations in the tails of the distribution. The test statistic is defined as follows:

(2)A2 =n1ni=1n2i1lnFxi + ln(1F(xn+1i))

where n is the sample size, F(x) is the theoretical cumulative distribution function, and xi are the ordered data values. The calculated A2 value is compared to critical values of the considered theoretical distribution. If the test statistic exceeds the critical value, the null hypothesis is rejected, indicating that the data do not follow the specified distribution [53].

2.4.3. Probability Plot Correlation Coefficient (PPCC) Test

The Probability Plot Correlation Coefficient (PPCC) test, introduced by [54], is widely recognized as a simple yet statistically powerful method for evaluating the goodness of fit between observed data and theoretical distribution.

In the PPCC method, the sample is ordered, and empirical probabilities are matched with the theoretical quantiles of the assumed distribution. The correlation coefficient (r) between the ordered data and the theoretical quantiles is calculated as follows:

(3)r =(xix¯)(yiy¯)(xix¯)2(yiy¯)2

where xi are the ordered observations, yi are the theoretical quantiles, and x¯ and y¯ are the means of observed data and theoretical quantiles, respectively.

A PPCC value close to 1 indicates a good fit between the observed data and the assumed distribution. Multiple distributions can be evaluated by calculating their respective PPCC values; the highest value typically suggests the best fitting distribution [54].

2.4.4. Goodness of Fit Measure (ZDIST) of L-Moment Method

Determining the ideal statistical distribution for a dataset is a foundational task, essential for creating reliable predictive models. This technique is grounded in L-Moments, which synthesize information from data order in a way that is less vulnerable to extreme values and more stable with limited samples. The ZDIST measure capitalizes on these properties to deliver a clear, quantitative verdict on which distribution fits best [6,55,56].

The procedure evaluates how closely a dataset’s L-moment ratios align with the expected values from a theoretical probability distribution. The formula that drives this comparison is as follows:

(4)ZDIST = (t4 τ4) /  σ4

In this expression, t4 represents the regional average L-kurtosis of the observed data, τ4 is the theoretical L-kurtosis of the proposed distribution, and σ4 stands for the standard deviation of the sample L-kurtosis, often derived through simulation. The distribution that yields a ZDIST value closest to zero is judged to be the most appropriate match. A lower absolute ZDIST value indicates a closer fit. By computing Zdist for a suite of potential distributions, the model with the smallest absolute ZDIST can be objectively identified as the best fitting distribution for the given dataset, streamlining the model selection process.

2.4.5. Conjunctive Evaluation of Selecting Criteria

In this section, the results of three goodness of fit tests are evaluated together to determine the most appropriate probability distribution for the data. In the K-S, A-D, and ZDIST tests, the probability distribution that yields the smallest test statistic is ranked as the most appropriate (1st); in the PPCC test, the distribution that yields the largest test statistic is ranked as the most appropriate distribution. In this way, the fit performances of the eight probability distributions are ranked from best to worst (1 to 8). To evaluate the tests together, an average rank number is calculated for each distribution, the smallest of which indicates the most appropriate distribution. The eight distributions in Table 2 are ranked by the conjunctive evaluation of four goodness of fit tests. The results for 24 h maximum rainfall measured at Adiyaman meteorological station are given as an example, and the minimum average ranking grade of the most appropriate probability distribution is shown in bold.

2.5. Stationary Analysis

One of the significant mistakes in frequency analysis of hydro-meteorological extremes is the assumption that the phenomenon under study is constant over time. However, it is an undeniable fact that hydro-meteorological variables are not always stationary under the influence of climate change.

To demonstrate the stationarity of maximum rainfall, a Mann–Kendall trend analysis was conducted for seven rainfall durations across 81 provinces. Mann–Kendall is a non-parametric test for determining whether monotonic trends exist in time series. The null hypothesis (H0) assumes there is no trend and that the data are independent and identically distributed. The alternative hypothesis (H1) proposes the presence of a trend—either increasing or decreasing. The Mann–Kendall statistic (S) is computed to reveal the trend direction.

(5)S =i=1n1j=i+1nsgn(xjxi)sgnxjxi=+1, if xjxi > 00, if xjxi=01, if xixj > 0

In the equations, n represents the total number of data, and xi and xj are the observed data at times i and j, respectively (j > i). The sign (sgn) function is computed with Equation (2). A positive value of S suggests an increasing (positive) trend, while a negative value of S indicates a decreasing (negative) trend.

When ties occur among data values and the dataset contains more than 10 elements, the variance is estimated using the following formula, assuming a normal distribution:

(6)VarS = nn12n + 5i=1Pti(ti1)(2ti + 5)18

where P denotes the number of tied groups and ti is the number of data points in the i-th tied group. The standardized Z value is then calculated as

(7)Z=S1Var (S)    ;   If S > 00   ;   If S=0S1Var (S)   ;   If S < 0

3. Results

3.1. Best Fit Probability Distributions for Each Rainfall Durations

The average ranks of three tests are calculated for seven standard rainfall durations of 81 stations, as shown in Table 3. The mean values of average ranks are computed for 81 stations and given for seven durations in Table 3 and Figure 2. Figure 2 shows the best probability distribution for each rainfall duration.

According to Figure 2, WAK distribution is the best fit for each duration. GEV, LP3, PE3, GLO, LN3, NOR, and GPA take the second, third, fourth, fifth, sixth, seventh, and eighth places, respectively.

3.2. Best Fit Probability Distributions by Provinces

Considering the 81 provinces of Türkiye, the best fit probability distributions of each province are determined for seven rainfall durations according to the ranking. The best fit distributions by provinces across the country are determined for seven rainfall durations and presented in Appendix B (Table A2). The ratio of each distribution is calculated and given in Table 4. For example, the WAK distribution for maximum rainfall of 15 min duration was the best fit for 53 of the 81 provinces (65%) across the country. In addition, the probability distribution maps for seven rainfall durations and the overall (average) of 81 provinces are illustrated in Figure 3.

Considering rainfall durations, the best fit distribution in Türkiye is the WAK distribution (approximately in the 60–65% range). This is followed by the GEV distribution (approximately 20%). These two distributions are followed by the LP3 distribution and the GLO distribution, with the ranges between 5% and 10%. Only in a few provinces maximum rainfall is represented by the PE3 and LN3 distributions. NOR and GPA failed to represent maximum rainfall in any province or rainfall duration. On the other hand, in the overall map obtained with minimum rank averages, the WAK distribution dominated the other distributions at a rate of 90%.

3.3. Best Fit Probability Distribution in Türkiye

In this country-based step, the averages of the ranks of the seven standard durations and 81 provinces were calculated. In this way, eight series, each consisting of 81 data points, were obtained for eight probability distributions. Figure 4 shows the overall ranking results as a box plot diagram for eight PDFs.

According to Figure 4, both the box plot and median values show that WAK is the best fit probability distribution in terms of overall performance.

On the other hand, WAK (at the significance level of α = 0.05) was accepted in four numerical tests of a total of 567 data series consisting of seven different rainfall durations of 81 provincial stations.

3.4. Best Fit Probability Distributions According to Goodness of Fit Tests

Finally, to evaluate the effect of the goodness of fit test in determining the best fit probability distribution, the overall ranks given to the distributions by four different tests and their average were obtained and the results are given in Table 5 and Figure 5.

According to Table 5 and Figure 5, the KS, AD, PPCC, and ZDIST tests showed similar results with minor differences (seventh and eighth places in the ranking of the KS test; fifth and sixth places in the ranking of the ZDIST test). The WAK distribution is the best fit according to four tests, and the last column, which averages the minimum ranks of all tests, significantly ranks the WAK distribution as first. GEV, LP3, PE3, GLO, LN3, NOR, and GPA take the second, third, fourth, fifth, sixth, seventh, and eighth places in average, respectively.

3.5. Stationary Analysis Results

Due to the influence of global warming, it is important to examine the changes in hydro-meteorological variables over time. In this study, the maximum rainfall series of seven rainfall durations from meteorological stations located in 81 provinces were examined for stationarity. The results are presented in Appendix C (Table A3), and it was concluded that stationarity conditions were not met in 21 of the 81 provinces (province names in bold). It is recommended that non-stationary frequency analysis be conducted in future frequency analysis studies for Türkiye’s maximum rainfall.

4. Discussion

To understand the characteristics of hydro-meteorological or climatic events, it is of great importance to determine the probability distribution of the considered phenomenon properly. The subject of determining the appropriate probability distribution has been the common objective of many scientific studies in different parts of the world to rationally estimate the frequency and intensity of the event. Table 6 provides a summary of recent studies examining the probability distributions of maximum rainfall around the world.

In this study, the best fit probability distribution for Turkey’s maximum rainfall data was evaluated from three different perspectives (duration-based, province-based, country-based). In Section 3, the results indicate the best fit probability distribution for maximum rainfall in Türkiye as WAK, on a rainfall duration basis (Table 3 and Table 4 and Figure 2 and Figure 3), on a province basis (Table 4; Figure 3), and on a country basis (Figure 4).

Ref. [60] showed WAK distribution as the best fit for southeastern and northeastern USA; Ref. [47] presented WAK as the best fit for Zhujiang River Basin, China; and Ref. [46] determined WAK as one of the best representative distributions for Southern Quebec, Canada.

The GEV distribution, which stands out as the second-best distribution in this study, was found to be the best fit by [28,39,41,58] for maximum rainfall data.

Refs. [25,27,44] showed the LP3 distribution as the best fit for maximum rainfall. LP3 distribution is widely used in Japan, Australia, the USA, and Canada and ranked third in our study.

When we look at the studies conducted for Türkiye, the results of our study differ from previous studies. In the study by [38] for Central Anatolia, the ZDIST method showed GLO, GEV, and GNO; in the study by [37] for the Aegean region, the KD, AD, and X2 methods showed GAM, GEV, and LN2; and in the study by [28] for the Black Sea region, the AD method showed the GEV distribution as the best fit. A detailed examination of these studies reveals that the WAK distribution is not considered. Furthermore, the State Meteorological Service of Türkiye does not use the WAK distribution as a candidate for maximum rainfall.

The previous studies in Table 6 are examined in detail, and it is noted that scientists generally tend to consider the GEV distribution as a candidate distribution when examining maximum rainfall. However, Ref. [6] stated that the Wakeby distribution is capable of representing a wide range of distributional shapes due to its high number of parameters. This flexibility increases its success in representing the tails of probability density functions with great precision, especially in extreme value analyses. These tails contain the most important information about extreme value series. This may be due to the mathematical structure of the 5-parameter WAK distribution being more complex than the GEV.

While some studies in the literature use a single test to determine best fit probability distributions, the use of two or more tests is recommended to reduce the bias of the methods.

5. Conclusions

Reasonable estimation of maximum rainfall is crucial for taking precautions against extreme natural events such as floods and erosion and is also important for the design of water structures and, in particular, rainwater drainage projects. Perhaps the most crucial step in estimating maximum rainfall with a specific frequency or intensity is accurately defining the probabilistic characteristics of the maximum rainfall event. Estimates obtained through frequency analysis can vary significantly depending on the PDF. Therefore, rationally determining the probability distribution function is crucial for representing extreme value series data in natural phenomena such as hydrology and climatology. Depending on whether the series consists of maximum or minimum values, the theoretical probability density function should be able to adequately represent the right or left tail of the extreme data containing the most critical information.

In this study, maximum rainfall data of seven standard durations of 81 meteorological stations located in the provinces of Türkiye were examined, with the aim to determine the goodness of fit of eight different probability distributions with the combination of four numerical tests (KS, AD, PPCC, ZDIST).

Three different perspectives were considered when examining the fitness of the probability distributions. The first was an examination of the maximum rainfall series of seven different rainfall durations across the country; the second was a province-based check of suitability for all 81 provinces; and the last was a general (country-based) examination in which the seven durations and their averages were considered.

From a rainfall duration perspective, maximum rainfall series of 5 min, 10 min, …, 12 h, and 24 h were analyzed separately. The rank number indicating the fit of each standard duration series to the distributions was obtained from the rank averages of all stations for the same duration. The results (Table 3 and Figure 2) show that the WAK distribution is the most suitable distribution (with minimum rank number) for each rainfall duration. GEV, LP3, PE3, GLO, LN3, NOR, and GPA are ranked second, third, fourth, fifth, sixth, seventh, and eighth, respectively. In addition to numerical calculations, graphical analyses were performed to examine suitable distributions for different rainfall durations.

From a province-based perspective, considering all 81 provinces in Türkiye, the best fit probability distribution for each province was ranked by seven rainfall durations and the average rank (overall) of all rainfall durations. The results (Table 4 and Figure 3) show that, in the province-based ranking, the best fit distribution in Türkiye is WAK (approximately in the 60–65% range). This is followed by the GEV distribution (approximately 20%). These two distributions are followed by the LP3 distribution and the GLO distribution, with the ranges between 5% and 10%. Only in a few provinces is maximum rainfall represented by the PE3 and LN3 distributions. NOR and GPA failed to represent maximum rainfall in any province or rainfall duration. On the other hand, in the overall map obtained with minimum rank averages, the WAK distribution dominated the other distributions at a rate of 90%.

From the country-based perspective, when the ranking averages of stations in 81 provinces for seven standard periods are considered, the WAK distribution, which shows the lowest rank, stands out as superior to the other distributions (Figure 4). Both the box plot and median values indicate that the WAK distribution is followed by the GEV, LP3, PE3, GLO, LN3, NOR, and GPA distributions, respectively.

For the three different perspectives examined, the KS, AD, PPCC, and ZDIST tests showed parallel results with minor differences.

While the WAK distribution appeared to be the most suitable for both the standard duration-based and country-based perspectives, it was not always the most suitable distribution in the province-based assessment. This raises the question of whether WAK is acceptable for all stations in all provinces and all precipitation durations. To clarify this, we would like to note that WAK is significantly accepted for all 567 rainfall series at a significance level of α = 0.05 according to all four numerical tests.

This study used data based on long records, considering the maximum rainfall data of seven different rainfall durations from 15 min to 24 h, and did this by using data from 81 stations located in all provinces across the country. The results were evaluated from four different perspectives for different time periods, different provinces, and the country as a whole, and it was concluded that the WAK distribution can be accepted as the parent probability distribution for Turkey’s maximum rainfall.

It is hoped that the study’s findings will contribute to the literature, assist water resources studies, and support planners, hydrologists, and meteorologists working on maximum rainfall.

Author Contributions

Conceptualization: I.T. and O.L.A.; methodology: I.T. and O.L.A.; formal analysis and investigation: I.T., O.L.A. and H.A.; preparation of figures: H.A. and I.T.; writing (original draft preparation): I.T. and O.L.A.; writing (review and editing): O.L.A. and H.A. All authors have read and agreed to the published version of the manuscript.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The original contributions presented in this study are included in the article. Further inquiries can be directed to the corresponding author.

Acknowledgments

The authors are very grateful to the General Directorate of State Hydraulic Works, Türkiye and the General Directory of Meteorology, Türkiye for providing the data records used in this study.

Conflicts of Interest

The authors declare no conflicts of interest.

Footnotes

Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Figures and Tables

Figure 1 Study area and meteorological stations in 81 provinces of Türkiye.

View Image -

Figure 2 The mean values of average ranks of 81 stations for seven rainfall durations.

View Image -

Figure 3 Best fit distribution maps of different rainfall durations by provinces in Türkiye ((ag) maps show the spatial variation in the probability distribution for 15 min, 30 min, 1 h, 3 h, 6 h, 12 h, and 24 h maximum rainfall and overall (h), respectively).

View Image -

View Image -

View Image -

Figure 4 Box plot diagram of average ranks of probability distributions.

View Image -

Figure 5 Best fit ranks of KS, AD, PPCC, and ZDIST tests and their averages.

View Image -

The probability density functions and the parameters of the distributions.

Distribution Probability Density Function Parameters
GEV f x = α 1 e x p 1 κ y e x p y w h e r e   y = κ 1 l o g 1 κ x ξ α ,    κ 0 w h e r e   y = x ξ α ,    κ = 0 ξ :   l o c a t i o n α :   s c a l e κ :   s h a p e
GLO f x = α 1 e x p 1 κ y 1 + e x p y 2 w h e r e   y = κ 1 l o g 1 κ x ξ α ,    κ 0 w h e r e   y = x ξ α ,    κ = 0 ξ :   l o c a t i o n α :   s c a l e κ :   s h a p e
P3 f x = x ξ α 1 e x p x ξ β β α Γ α w h e r e   x ξ ξ :   l o c a t i o n α :   s c a l e κ :   s h a p e
LP3 f y = y ξ α 1 e x p y ξ β β α Γ α w h e r e   y ξ   a n d   y = l n x ξ :   l o c a t i o n α :   s c a l e κ :   s h a p e
LN3 f x = 1 x γ σ 2 π e x p ln x γ μ 2 2 σ 2 w h e r e   y < x < γ :   l o c a t i o n α :   s c a l e κ :   s h a p e
GPA f x = α 1 e x p 1 κ y w h e r e   y = κ 1 l o g 1 κ x ξ α ,    κ 0 w h e r e   y = x ξ α ,    κ = 0 ξ :   l o c a t i o n α :   s c a l e κ :   s h a p e
NOR 2 π 1 / 2 α 1 e x p y y 2 / 2 w h e r e   y = κ 1 l o g 1 κ x ξ α ,    κ 0 w h e r e   y = x ξ α ,    κ = 0 ξ :   l o c a t i o n α :   s c a l e κ :   s h a p e
WAK f x = 1 F x δ + 1 α ( 1 F ( x ) ( β + δ ) ) + γ ξ :   l o c a t i o n α , γ :   s c a l e β , δ :   s h a p e

Goodness of fit ranking results of 24 h maximum rainfall for Adiyaman station.

Rank
Distribution KS AD PPCC ZDIST Average
WAK 1 1 1 2 1.25
GEV 1 1 3 6 2.75
LP3 7 7 2 3 4.75
PE3 2 3 4 7 4.00
GLO 3 2 6 1 3.00
LN3 4 4 7 4 4.75
NOR 6 5 5 5 5.25
GPA 5 6 8 8 6.75

The mean values of average ranks of 81 stations for seven rainfall durations.

Distribution 15 min 30 min 1 h 3 h 6 h 12 h 24 h
WAK 2.2 2.2 2.6 2.4 2.2 2.4 2.3
GEV 2.9 3.0 3.0 2.9 2.9 2.8 3.0
LP3 3.0 3.2 3.0 3.4 3.4 3.3 3.7
PE3 4.7 4.7 4.5 4.4 4.8 4.7 4.7
GLO 4.7 4.6 4.9 4.7 4.6 4.6 4.1
LN3 5.3 5.2 4.9 4.9 5.0 5.0 4.9
NOR 6.5 6.6 6.6 6.6 6.6 6.6 6.7
GPA 6.7 6.6 6.5 6.7 6.6 6.7 6.7

Best fit distribution rates of different rainfall durations in Türkiye.

Distribution 15 min 30 min 1 h 3 h 6 h 12 h 24 h Overall
WAK 65% 67% 59% 62% 68% 59% 65% 90%
GEV 21% 21% 22% 20% 21% 30% 21% 6%
LP3 9% 7% 10% 7% 5% 1% 9% 0%
PE3 1% 1% 4% 4% 0% 0% 1% 0%
GLO 2% 2% 4% 6% 6% 7% 2% 1%
LN3 1% 1% 1% 1% 0% 2% 1% 2%
NOR 0% 0% 0% 0% 0% 0% 0% 0%
GPA 0% 0% 0% 0% 0% 0% 0% 0%

Average ranks of KS, AD, PPCC, and ZDIST tests the probability distributions.

Distribution KS AD PPCC ZDIST Average
WAK 2.39 2.82 1.72 1.22 2.04
GEV 3.27 3.08 3.03 2.48 2.96
LP3 3.98 3.55 3.46 2.97 3.49
PE3 4.33 3.79 3.54 5.03 4.17
GLO 4.38 3.98 3.95 5.43 4.44
LN3 4.62 4.51 5.80 5.27 5.05
NOR 6.57 6.58 6.70 6.56 6.60
GPA 6.46 7.69 7.79 7.04 7.24

Summary of recent studies on determination of probability distribution of maximum rainfall.

Study Rainfall Site/Region—Country Goodness of Fit Test Best Fit PDF
[28] sub-daily and daily max. Black Sea region—Türkiye AD GEV
[32] 5-day max. Zhujiang River Basin—China KS, AD, χ2 WAK
[25] 1 h max. Japan χ2 LP3
[41] daily max. Lazzio, Sicily—Italy RMSE, KS GEV
[46] 5 min, 1 h max. Southern Quebec—Canada Q-Q plot, RMSE, RRMSE, MAE, CC WAK, GEV, NOR
[57] daily max. Northern—Algeria KS, Q-Q plot GUM, GEV
[44] sub-daily, daily, 2-,3-day max. New South Wales—Australia KS, AD, χ2 LP3, GEV
[58] daily max. Upper Vistula Basin, Poland RMSE, R2,PWRMSE GEV
[38] sub-daily and daily max. Inland (Central) Anatolia—Türkiye ZDIST GLO, NOR, GEV
[45] sub-daily and daily max. Umbria Region—Italy ZDIST GLO, NOR, GEV
[37] sub-daily and daily max. Aegean region—Türkiye KS, AD, χ2 GAM, LN2, GEV
[42] monthly and annual daily max. Ngong River Basin—Kenya KS, AD, Cramér–von Mises PE3, GEV
[39] sub-daily and daily max. Arizona—USA Cramér–von Mises, Lilliefors, AD GEV
[21] sub-daily and daily max. Ontario region—Canada RMSE, RRMSE, CC MAE, AIC, BIC PE3, GEV, GNO
[59] sub-daily and daily max Ontario region —Canada Q-Q plot, RMSE, RRMSE, MAE, CC GEV
[36] daily max. Jhelum River basin—India KS, AD, χ2, RMSE,Q-Q plot LP3, GEV
[60] daily max. SE and NE USA AD WAK
[61] daily max. Amman Zara Basin—Jordan KS GLO, GEV, NOR
[27] daily max. Egypt RMSE, RRMSE, CC, BIASr, AIC, BIC LP3, LN2, EXP
[43] sub-daily and daily max. Sicily region—Italy ZDIST LN3, GEV

EXP, Exponential; GEV, generalized extreme value; NOR, normal; GPA, Generalized Pareto; GUM, Gumbel; PE3, Pearson Type III; LP3, Log-Pearson Type III; WAK, Wakeby; KAP, Kappa; LN2, 2 Parameter Log-Normal; LN3, 3 Parameter Log-Normal; GAM, 2 Parameter Gamma; GLO, Generalized Logistic; χ2, Chi-square; AIC, Akike Information Criteria; CC, Correlation Coefficient; RMSE, Root Mean Square Error; RRMSE, Relative Root Mean Square Error; MAE, Maximum Absolute Error; K-S, Kolmogorov–Smirnov; AD, Anderson–Darling; BIC, Bayesian Information Criteria; Relative BIAS (BIASr); Q-Q Plot; ZDIST.

Appendix A

Meteorological stations in 81 provinces of Türkiye.

Station Latitude(°N) Longitude(°E) Altitude (m) Annual Rainfall (mm) Data Recording Period
Adana 37.00 35.34 23 668 1944–2020
Adıyaman 37.76 38.28 672 715 1963–2020
Afyonkarahisar 38.74 30.56 1034 444 1957–2020
Ağrı 39.73 43.05 1646 526 1967–2020
Aksaray 38.37 33.99 970 360 1965–2020
Amasya 40.67 35.84 409 463 1965–2020
Ankara 39.97 32.864 891 392 1940–2020
Antalya 36.55 31.98 6 1040 1964–2020
Ardahan 41.11 42.71 1827 558 1967–2020
Artvin 41.18 41.82 613 695 1965–2020
Aydın 37.84 27.84 56 658 1959–2020
Balıkesir 39.63 27.92 102 604 1957–2020
Bartın 41.63 32.36 33 1063 1966–2020
Batman 37.86 41.16 610 489 1969–2020
Bayburt 40.26 40.22 1584 451 1966–2020
Bilecik 40.14 29.98 539 461 1960–2020
Bingöl 38.89 40.50 1139 945 1966–2020
Bitlis 38.48 42.16 1785 1072 1966–2020
Bolu 40.73 31.60 743 555 1949–2020
Burdur 37.72 30.29 957 428 1964–2020
Bursa 40.23 29.01 100 708 1951–2020
Çanakkale 40.14 26.40 6 623 1958–2020
Çankırı 40.61 33.61 755 415 1959–2020
Çorum 40.55 34.94 776 431 1958–2020
Denizli 37.76 29.09 425 568 1959–2020
Diyarbakır 37.90 40.20 674 491 1940–2020
Düzce 40.84 31.15 146 838 1965–2020
Edirne 41.68 26.55 51 599 1949–2020
Elazığ 38.64 39.26 989 421 1957–2020
Erzincan 39.75 39.49 1216 376 1957–2020
Erzurum 39.95 41.19 1758 431 1956–2020
Eskişehir 39.77 30.55 801 356 1940–2020
Gaziantep 37.06 37.35 854 564 1957–2020
Giresun 40.92 38.39 38 1292 1966–2020
Gümüşhane 40.46 39.47 1216 463 1966–2020
Hakkari 37.58 43.74 1720 793 1956–2020
Hatay 36.20 36.15 104 1153 1957–2020
Iğdır 39.92 44.05 856 259 1966–2020
Isparta 37.79 30.57 997 566 1957–2020
İstanbul 40.91 29.16 18 661 1974–2020
İzmir 38.40 27.08 29 711 1938–2020
Kahramanmaraş 37.58 36.92 572 722 1966–2020
Karabük 41.20 32.63 278 549 1966–2020
Karaman 37.19 33.22 1018 338 1965–2020
Kars 40.60 43.11 1777 508 1965–2020
Kastamonu 41.37 33.78 800 485 1948–2020
Kayseri 38.69 35.50 1094 390 1950–2020
Kırıkkale 39.84 33.52 751 383 1967–2020
Kırklareli 41.74 27.22 232 582 1966–2020
Kırşehir 39.16 34.16 1007 382 1942–2020
Kilis 36.71 37.11 640 499 1966–2020
Kocaeli 40.77 29.92 74 814 1945–2020
Konya 37.98 32.57 1031 328 1950–2020
Kütahya 39.42 29.99 969 328 1941–2020
Malatya 38.34 38.22 950 384 1958–2020
Manisa 38.62 27.41 71 742 1958–2020
Mersin 36.78 34.60 7 610 1958–2020
Mardin 37.31 40.73 1040 673 1966–2020
Muğla 37.21 28.37 646 862 1944–2020
Muş 38.75 41.50 1322 759 1966–2020
Nevşehir 38.62 34.70 1260 422 1965–2020
Niğde 37.96 34.68 1211 343 1959–2020
Ordu 40.98 37.89 5 1050 1965–2020
Osmaniye 37.10 36.25 94 817 1974–2020
Rize 41.04 40.50 3 2301 1940–2020
Sakarya 40.77 30.39 30 844 1962–2020
Samsun 41.34 36.26 4 722 1957–2020
Siirt 37.93 41.94 895 715 1959–2020
Sinop 42.03 35.16 32 692 1965–2020
Sivas 39.74 37.00 1294 430 1958–2020
Tekirdağ 40.96 27.50 4 578 1963–2020
Tokat 40.33 36.56 611 435 1966–2020
Trabzon 40.99 39.77 33 829 1966–2020
Tunceli 39.16 39.54 914 871 1966–2020
Şanlıurfa 37.16 38.79 550 459 1959–2020
Şırnak 37.52 42.45 1375 720 1959–2020
Uşak 38.67 29.40 919 558 1941–2020
Van 38.47 43.35 1675 395 1956–2020
Yalova 40.66 29.28 4 755 1962–2020
Yozgat 39.82 34.82 1301 572 1960–2020
Zonguldak 41.45 31.78 135 1226 1945–2020

Appendix B

Goodness of fit of maximum rainfall for seven rainfall durations and overall for 81 provinces.

Province Rainfall Duration
15 min 30 min 1 h 3 h 6 h 12 h 24 h Overall
Adana GEV GEV WAK WAK WAK GEV WAK WAK
Adıyaman WAK WAK GLO GLO GLO WAK WAK WAK
Afyonkarahisar WAK GEV WAK WAK GEV GEV WAK WAK
Ağrı GEV WAK WAK WAK WAK WAK WAK WAK
Aksaray WAK WAK GEV WAK WAK GEV WAK WAK
Amasya GLO WAK WAK GLO GEV GEV WAK GLO
Ankara WAK LP3 GEV WAK WAK WAK WAK WAK
Antalya WAK WAK GEV GEV WAK WAK WAK WAK
Ardahan GEV WAK WAK WAK WAK WAK LP3 WAK
Artvin WAK WAK GEV GEV WAK WAK GEV WAK
Aydın WAK WAK WAK LP3 LP3 GEV WAK WAK
Balıkesir GEV WAK WAK WAK WAK WAK WAK WAK
Bartın GEV GEV LP3 WAK GEV GEV WAK GEV
Batman WAK WAK GEV GEV WAK WAK GEV WAK
Bayburt GEV WAK WAK WAK GEV WAK GEV WAK
Bilecik WAK WAK LP3 WAK WAK GEV GEV WAK
Bingöl WAK WAK WAK WAK WAK WAK GLO WAK
Bitlis WAK GEV LP3 GLO GEV WAK WAK WAK
Bolu GEV LP3 WAK WAK WAK WAK WAK WAK
Burdur WAK WAK WAK WAK WAK WAK WAK WAK
Bursa WAK WAK GEV WAK GEV GEV GLO WAK
Çanakkale WAK GEV WAK GEV GEV WAK WAK GEV
Çankırı LP3 GEV WAK GLO WAK WAK WAK WAK
Çorum WAK WAK WAK WAK GEV WAK GEV WAK
Denizli WAK WAK LP3 WAK WAK GEV WAK WAK
Diyarbakır WAK WAK WAK WAK WAK WAK GEV WAK
Düzce GEV WAK WAK WAK GEV WAK WAK WAK
Edirne WAK WAK GEV WAK WAK WAK GEV WAK
Elazığ WAK WAK WAK WAK WAK WAK GEV WAK
Erzincan WAK WAK WAK WAK GEV WAK GLO WAK
Erzurum LP3 WAK GEV GEV GLO GLO GEV GEV
Eskişehir LP3 GEV GEV WAK WAK WAK GEV WAK
Gaziantep LP3 WAK WAK WAK LP3 GEV WAK WAK
Giresun WAK LP3 WAK PE3 WAK WAK LP3 WAK
Gümüşhane WAK WAK WAK WAK WAK GEV GEV WAK
Hakkari WAK WAK WAK WAK WAK WAK WAK WAK
Iğdır WAK GEV GEV WAK WAK GEV WAK WAK
Isparta WAK WAK WAK WAK WAK GLO WAK WAK
İstanbul WAK GEV GEV GEV WAK WAK LP3 WAK
İzmir GLO WAK GEV WAK WAK WAK GEV WAK
Kahramanmaraş WAK WAK GLO GEV WAK WAK WAK WAK
Karabük WAK WAK WAK LP3 WAK WAK LN3 WAK
Karaman LP3 LP3 WAK GEV WAK WAK WAK WAK
Kars GEV WAK GEV WAK GEV GLO GEV WAK
Kastamonu WAK WAK WAK LP3 WAK WAK LP3 WAK
Kayseri WAK LP3 WAK WAK WAK WAK WAK WAK
Kırıkkale WAK WAK WAK LP3 GLO GLO WAK WAK
Kırklareli WAK GLO WAK WAK WAK WAK GEV WAK
Kırşehir GEV WAK GEV WAK WAK WAK WAK WAK
Kilis WAK WAK WAK GEV WAK WAK WAK WAK
Kocaeli WAK WAK LP3 WAK WAK WAK WAK WAK
Konya GEV WAK WAK GEV WAK GEV WAK WAK
Kütahya GEV WAK LP3 WAK WAK GEV GEV GEV
Malatya GEV WAK GLO GEV WAK WAK GEV WAK
Manisa WAK GEV GEV WAK WAK GEV WAK WAK
Mardin LP3 WAK WAK LP3 GEV WAK WAK WAK
Mersin WAK GEV GEV GEV WAK WAK PE3 WAK
Muğla WAK WAK GEV GLO GLO GEV WAK WAK
Muş WAK GEV LP3 WAK GLO GEV WAK WAK
Nevşehir WAK WAK WAK WAK WAK GEV WAK WAK
Niğde WAK WAK WAK WAK WAK GLO WAK WAK
Ordu WAK WAK WAK WAK WAK GEV WAK WAK
Osmaniye GEV WAK WAK WAK WAK GEV WAK WAK
Rize GEV WAK WAK LP3 LP3 WAK WAK WAK
Sakarya GEV WAK WAK WAK GEV GEV WAK WAK
Samsun GEV WAK WAK WAK LP3 WAK WAK WAK
Siirt WAK GEV PE3 WAK WAK WAK GLO WAK
Sinop WAK GEV WAK WAK WAK LP3 WAK WAK
Sivas WAK WAK WAK GEV WAK GEV WAK WAK
Şanlıurfa WAK GLO LP3 PE3 GEV GLO WAK WAK
Şırnak WAK GEV PE3 WAK WAK WAK GLO WAK
Tekirdağ WAK WAK GEV WAK WAK WAK WAK WAK
Tokat WAK WAK WAK GEV GEV GEV WAK WAK
Trabzon WAK LP3 WAK PE3 WAK WAK LN3 WAK
Tunceli LP3 WAK WAK WAK WAK WAK GLO WAK
Uşak WAK GEV WAK GEV GEV GEV WAK GEV
Van WAK WAK WAK WAK WAK WAK WAK WAK
Yalova WAK WAK WAK WAK WAK WAK LN3 WAK
Yozgat LN3 LN3 LN3 LN3 GEV LN3 LN3 LN3
Zonguldak PE3 PE3 PE3 GEV WAK LN3 LN3 LN3

Appendix C

Stationarity analysis of maximum rainfall series.

15 min 30 min 1 h 3 h 6 h 12 h 24 h
Adana stationary stationary stationary stationary stationary nonstationary stationary
Adıyaman stationary stationary stationary nonstationary stationary stationary stationary
Afyonkarahisar nonstationary nonstationary nonstationary nonstationary stationary stationary stationary
Ağrı stationary stationary stationary stationary stationary stationary stationary
Aksaray stationary nonstationary nonstationary nonstationary stationary stationary nonstationary
Amasya stationary stationary stationary stationary stationary stationary stationary
Ankara stationary stationary stationary stationary stationary stationary stationary
Antalya stationary stationary stationary stationary stationary stationary stationary
Ardahan stationary stationary stationary stationary stationary stationary stationary
Artvin nonstationary nonstationary nonstationary nonstationary stationary stationary stationary
Aydın nonstationary nonstationary nonstationary nonstationary nonstationary nonstationary nonstationary
Balıkesir stationary stationary stationary stationary stationary stationary stationary
Bartın stationary stationary stationary nonstationary nonstationary nonstationary nonstationary
Batman stationary stationary stationary stationary nonstationary nonstationary stationary
Bayburt nonstationary nonstationary nonstationary stationary stationary stationary stationary
Bilecik stationary stationary stationary nonstationary nonstationary stationary stationary
Bingöl nonstationary stationary stationary nonstationary nonstationary stationary stationary
Bitlis stationary stationary stationary stationary stationary stationary stationary
Bolu stationary stationary nonstationary nonstationary stationary stationary stationary
Burdur stationary stationary stationary stationary stationary stationary stationary
Bursa stationary nonstationary nonstationary nonstationary nonstationary stationary stationary
Çanakkale stationary stationary stationary stationary stationary stationary stationary
Çankırı stationary stationary stationary stationary stationary nonstationary stationary
Çorum stationary stationary stationary nonstationary nonstationary stationary stationary
Denizli stationary stationary stationary stationary nonstationary nonstationary stationary
Diyarbakır stationary stationary stationary stationary stationary stationary stationary
Düzce stationary stationary stationary stationary stationary stationary stationary
Edirne stationary stationary nonstationary nonstationary nonstationary nonstationary nonstationary
Elazığ stationary stationary stationary stationary nonstationary nonstationary stationary
Erzincan stationary stationary stationary stationary stationary stationary stationary
Erzurum stationary stationary stationary stationary stationary stationary stationary
Eskişehir stationary stationary stationary stationary stationary stationary stationary
Gaziantep stationary stationary stationary stationary stationary stationary nonstationary
Giresun stationary stationary stationary stationary stationary stationary stationary
Gümüşhane stationary stationary stationary stationary stationary stationary stationary
Hakkari stationary stationary stationary stationary stationary stationary stationary
Hatay stationary stationary stationary stationary stationary stationary stationary
Iğdır nonstationary stationary stationary stationary stationary stationary stationary
Isparta stationary stationary stationary stationary stationary stationary stationary
İstanbul stationary stationary stationary stationary stationary stationary stationary
İzmir nonstationary nonstationary nonstationary nonstationary nonstationary nonstationary nonstationary
Kahramanmaraş stationary stationary stationary stationary nonstationary stationary stationary
Karabük nonstationary nonstationary nonstationary stationary nonstationary nonstationary nonstationary
Karaman stationary stationary stationary stationary stationary stationary stationary
Kars stationary stationary stationary stationary stationary stationary nonstationary
Kastamonu nonstationary nonstationary nonstationary stationary nonstationary nonstationary nonstationary
Kayseri nonstationary nonstationary nonstationary nonstationary nonstationary nonstationary stationary
Kırıkkale stationary stationary stationary stationary stationary stationary stationary
Kırklareli stationary stationary stationary stationary stationary stationary stationary
Kırşehir stationary nonstationary nonstationary stationary nonstationary nonstationary nonstationary
Kilis stationary stationary stationary stationary stationary stationary stationary
Kocaeli nonstationary nonstationary nonstationary nonstationary nonstationary stationary stationary
Konya stationary stationary stationary stationary stationary stationary nonstationary
Kütahya stationary nonstationary nonstationary nonstationary nonstationary nonstationary nonstationary
Malatya nonstationary stationary stationary stationary stationary stationary stationary
Manisa stationary stationary stationary stationary stationary stationary stationary
Mardin stationary stationary stationary stationary stationary stationary nonstationary
Mersin stationary stationary stationary nonstationary nonstationary nonstationary nonstationary
Muğla nonstationary nonstationary nonstationary nonstationary stationary stationary stationary
Muş stationary stationary stationary stationary stationary stationary stationary
Nevşehir stationary stationary stationary stationary stationary stationary stationary
Niğde stationary nonstationary nonstationary stationary stationary stationary stationary
Ordu stationary stationary stationary stationary stationary stationary stationary
Osmaniye stationary stationary stationary stationary stationary stationary stationary
Rize nonstationary nonstationary nonstationary nonstationary nonstationary nonstationary stationary
Sakarya nonstationary nonstationary nonstationary nonstationary nonstationary nonstationary stationary
Samsun stationary stationary stationary stationary stationary stationary stationary
Siirt stationary stationary stationary stationary stationary stationary stationary
Sinop stationary stationary stationary stationary stationary stationary stationary
Sivas stationary stationary stationary stationary stationary stationary stationary
Şanlıurfa stationary stationary stationary stationary stationary stationary stationary
Şırnak stationary stationary stationary stationary stationary stationary stationary
Tekirdağ stationary stationary stationary nonstationary stationary stationary stationary
Tokat stationary stationary stationary stationary stationary stationary stationary
Trabzon stationary stationary stationary stationary stationary stationary stationary
Tunceli nonstationary stationary stationary nonstationary nonstationary stationary stationary
Uşak stationary stationary stationary stationary stationary stationary stationary
Van stationary stationary stationary stationary stationary stationary stationary
Yalova stationary stationary stationary stationary stationary stationary stationary
Yozgat stationary stationary stationary stationary stationary stationary stationary
Zonguldak stationary stationary stationary stationary stationary stationary stationary

References

1. IPCC. AR6 Synthesis Report: Climate Change, Synthesis Report for the Sixth Assessment Report; IPCC: Geneva, Switzerland, 2023.

2. Francisco-Fernández, M.; Quintela-del-Río, A. Comparing Simultaneous and Pointwise Confidence Intervals for Hydrological Processes. PLoS ONE; 2016; 11, e0147505. [DOI: https://dx.doi.org/10.1371/journal.pone.0147505]

3. Flowers-Cano, R.S.; Ortiz-Gómez, R. Comparison of Four Methods to Select the Best Probability Distribution for Frequency Analysis of Annual Maximum Precipitation Using Monte Carlo Simulations. Theor. Appl. Climatol.; 2021; 145, pp. 1177-1192. [DOI: https://dx.doi.org/10.1007/s00704-021-03683-0]

4. Chow, V.T. Statistical and Probability Analysis of Hydrologic Data. Handbook of Applied Hydrology; McGraw-Hill: New York, NY, USA, 1964; pp. 81-97.

5. Stedinger, J.R.; Vogel, R.M.; Foufoula-Georgiou, E. Frequency Analysis of Extreme Events; McGraw-Hill: New York, NY, USA, 1993; Chapter 18

6. Hosking, J.R.M.; Wallis, J.R. Regional Frequency Analysis; Cambridge University Press: Cambridge, UK, 1997; ISBN 9780521430456

7. Ramachandra Rao, A.; Hamed, K.H. Flood Frequency Analysis; Hamed, K.; Rao, A.R. CRC Press: Boca Raton, FL, USA, 2019; ISBN 9780429128813

8. World Meteorological Organization. Guide to Hydrological Practices, Volume II: Management of Water Resources and Application of Hydrological Practices; 6th ed. World Meteorological Organization: Geneva, Switzerland, 2009.

9. Salinas, J.L.; Castellarin, A.; Viglione, A.; Kohnová, S.; Kjeldsen, T.R. Regional Parent Flood Frequency Distributions in Europe—Part 1: Is the GEV Model Suitable as a Pan-European Parent?. Hydrol. Earth Syst. Sci.; 2014; 18, pp. 4381-4389. [DOI: https://dx.doi.org/10.5194/hess-18-4381-2014]

10. Castellarin, A.; Kohnová, S.; Gaál, L.; Fleig, A.; Salinas, J.L.; Toumazis, A.; Kjeldsen, T.; Macdonald, N. Review of Applied-Statistical Methods for Flood-Frequency Analysis in Europe; (NERC) Centre for Ecology & Hydrology: Bangor, UK, 2012; ISBN 9781906698324

11. Griffis, V.W.; Stedinger, J.R. Log-Pearson Type 3 Distribution and Its Application in Flood Frequency Analysis. I: Distribution Characteristics. J. Hydrol. Eng.; 2007; 12, pp. 482-491. [DOI: https://dx.doi.org/10.1061/(ASCE)1084-0699(2007)12:5(482)]

12. Ball, J.; Babister, M.; Nathan, R.; Weeks, W.; Weinmann, P.; Retallick, M.; Testoni, I. Australian Rainfall and Runoff: A Guide to Flood Estimation; 4th ed. Commonwealth of Australia (Geoscience Australia): Canberra, Australia, 2016.

13. Wang, Y.; McBean, E.A.; Jarrett, P. Identification of Changes in Heavy Rainfall Events in Ontario, Canada. Stoch. Environ. Res. Risk Assess.; 2015; 29, pp. 1949-1962. [DOI: https://dx.doi.org/10.1007/s00477-015-1085-6]

14. Hansen, C.R. Comparison of Regional and At-Site Frequency Analysis Methods for the Estimation of Southern Alberta Extreme Rainfall. Can. Water Resour. J. Rev. Can. Des Ressour. Hydr.; 2015; 40, pp. 325-342. [DOI: https://dx.doi.org/10.1080/07011784.2015.1060871]

15. Simonovic, S.P.; Schardong, A.; Sandink, D. Mapping Extreme Rainfall Statistics for Canada under Climate Change Using Updated Intensity-Duration-Frequency Curves. J. Water Resour. Plan. Manag.; 2017; 143, 04016078. [DOI: https://dx.doi.org/10.1061/(ASCE)WR.1943-5452.0000725]

16. Tan, X.; Gan, T.Y. Non-Stationary Analysis of the Frequency and Intensity of Heavy Precipitation over Canada and Their Relations to Large-Scale Climate Patterns. Clim. Dyn.; 2017; 48, pp. 2983-3001. [DOI: https://dx.doi.org/10.1007/s00382-016-3246-9]

17. Environment Canada Engineering Climate Data Sets, Intensity–Duration–Frequency (IDF) Files. Available online: https://collaboration.cmc.ec.gc.ca/cmc/climate/Engineer_Climate/IDF/Documentation_and_Guidance/Notes_on_EC_IDF.pdf (accessed on 14 August 2025).

18. CSA. Development, Interpretation and Use of Rainfall Intensity-Duration-Frequency (IDF) Information: A Guideline for Canadian Water Resources Practitioners; 1st ed. CSA: Toronto, ON, Canada, 2010.

19. Laio, F.; Di Baldassarre, G.; Montanari, A. Model Selection Techniques for the Frequency Analysis of Hydrological Extremes. Water Resour. Res.; 2009; 45, W07416. [DOI: https://dx.doi.org/10.1029/2007WR006666]

20. Haddad, K.; Rahman, A. Selection of the Best Fit Flood Frequency Distribution and Parameter Estimation Procedure: A Case Study for Tasmania in Australia. Stoch. Environ. Res. Risk Assess.; 2011; 25, pp. 415-428. [DOI: https://dx.doi.org/10.1007/s00477-010-0412-1]

21. Nguyen, T.-H.; El Outayek, S.; Lim, S.H.; Nguyen, V.-T.-V. A Systematic Approach to Selecting the Best Probability Models for Annual Maximum Rainfalls—A Case Study Using Data in Ontario (Canada). J. Hydrol.; 2017; 553, pp. 49-58. [DOI: https://dx.doi.org/10.1016/j.jhydrol.2017.07.052]

22. Benyahya, L.; Gachon, P.; St-Hilaire, A.; Laprise, R. Frequency Analysis of Seasonal Extreme Precipitation in Southern Quebec (Canada): An Evaluation of Regional Climate Model Simulation with Respect to Two Gridded Datasets. Hydrol. Res.; 2014; 45, pp. 115-133. [DOI: https://dx.doi.org/10.2166/nh.2013.066]

23. Mandal, S.; Choudhury, B.U. Estimation and Prediction of Maximum Daily Rainfall at Sagar Island Using Best Fit Probability Models. Theor. Appl. Climatol.; 2015; 121, pp. 87-97. [DOI: https://dx.doi.org/10.1007/s00704-014-1212-1]

24. Tfwala, C.M.; van Rensburg, L.D.; Schall, R.; Mosia, S.M.; Dlamini, P. Precipitation Intensity-Duration-Frequency Curves and Their Uncertainties for Ghaap Plateau. Clim. Risk Manag.; 2017; 16, pp. 1-9. [DOI: https://dx.doi.org/10.1016/j.crm.2017.04.004]

25. Yuan, J.; Emura, K.; Farnham, C.; Alam, M.A. Frequency Analysis of Annual Maximum Hourly Precipitation and Determination of Best Fit Probability Distribution for Regions in Japan. Urban Clim.; 2018; 24, pp. 276-286. [DOI: https://dx.doi.org/10.1016/j.uclim.2017.07.008]

26. Soltani, S.; Almasi, P.; Helfi, R.; Modarres, R.; Mohit Esfahani, P.; Ghadami Dehno, M. A New Approach to Explore Climate Change Impact on Rainfall Intensity–Duration–Frequency Curves. Theor. Appl. Climatol.; 2020; 142, pp. 911-928. [DOI: https://dx.doi.org/10.1007/s00704-020-03309-x]

27. Gado, T.A.; Salama, A.M.; Zeidan, B.A. Selection of the Best Probability Models for Daily Annual Maximum Rainfalls in Egypt. Theor. Appl. Climatol.; 2021; 144, pp. 1267-1284. [DOI: https://dx.doi.org/10.1007/s00704-021-03594-0]

28. Aksu, H.; Cetin, M.; Aksoy, H.; Yaldiz, S.G.; Yildirim, I.; Keklik, G. Spatial and Temporal Characterization of Standard Duration-Maximum Precipitation over Black Sea Region in Turkey. Nat. Hazards; 2022; 111, pp. 2379-2405. [DOI: https://dx.doi.org/10.1007/s11069-021-05141-6]

29. Ng, J.L.; Huang, Y.F.; Tan, S.K.; Lee, J.C.; Md Noh, N.I.F.; Thian, S.Y. Comparative Evaluation of Various Parameter Estimation Methods for Extreme Rainfall in Kelantan River Basin. Theor. Appl. Climatol.; 2024; 155, pp. 1759-1775. [DOI: https://dx.doi.org/10.1007/s00704-023-04723-7]

30. Ibrahim, M.N. Four-Parameter Kappa Distribution for Modeling Precipitation Extremes: A Practical Simplified Method for Parameter Estimation in Light of the L-Moment. Theor. Appl. Climatol.; 2022; 150, pp. 567-591. [DOI: https://dx.doi.org/10.1007/s00704-022-04176-4]

31. de Bodas Terassi, P.M.; Pontes, P.R.M.; Xavier, A.C.F.; Cavalcante, R.B.L.; de Oliveira Serrão, E.A.; Sobral, B.S.; de Oliveira-Júnior, J.F.; de Melo, A.M.Q.; Baratto, J. A Comprehensive Analysis of Regional Disaggregation Coefficients and Intensity-Duration-Frequency Curves for the Itacaiúnas Watershed in the Eastern Brazilian Amazon. Theor. Appl. Climatol.; 2023; 154, pp. 863-880. [DOI: https://dx.doi.org/10.1007/s00704-023-04591-1]

32. Fischer, T.; Su, B.; Luo, Y.; Scholten, T. Probability Distribution of Precipitation Extremes for Weather Index–Based Insurance in the Zhujiang River Basin, South China. J. Hydrometeorol.; 2012; 13, pp. 1023-1037. [DOI: https://dx.doi.org/10.1175/JHM-D-11-041.1]

33. Beskow, S.; Caldeira, T.L.; de Mello, C.R.; Faria, L.C.; Guedes, H.A.S. Multiparameter Probability Distributions for Heavy Rainfall Modeling in Extreme Southern Brazil. J. Hydrol. Reg. Stud.; 2015; 4, pp. 123-133. [DOI: https://dx.doi.org/10.1016/j.ejrh.2015.06.007]

34. Kim, H.; Kim, S.; Shin, H.; Heo, J.-H. Appropriate Model Selection Methods for Nonstationary Generalized Extreme Value Models. J. Hydrol.; 2017; 547, pp. 557-574. [DOI: https://dx.doi.org/10.1016/j.jhydrol.2017.02.005]

35. Kumar, V.; Shanu,; Jahangeer,. Statistical Distribution of Rainfall in Uttarakhand, India. Appl. Water Sci.; 2017; 7, pp. 4765-4776. [DOI: https://dx.doi.org/10.1007/s13201-017-0586-5]

36. Umar, S.; Lone, M.A.; Goel, N.K. Modeling of Annual Rainfall Extremes in the Jhelum River Basin, North Western Himalayas. Sustain. Water Resour. Manag.; 2021; 7, 59. [DOI: https://dx.doi.org/10.1007/s40899-021-00539-3]

37. Karahan, H.; Ozkan, E. Best Fitting Distributions for the Standard Duration Annual Maximum Precipitations in the Aegean Region. Pamukkale Univ. J. Eng. Sci.; 2013; 19, pp. 152-157. [DOI: https://dx.doi.org/10.5505/pajes.2013.29392]

38. Haktanir, T.; Citakoglu, H.; Seckin, N. Regional Frequency Analyses of Successive-Duration Annual Maximum Rainfalls by L-Moments Method. Hydrol. Sci. J.; 2016; 61, pp. 647-668. [DOI: https://dx.doi.org/10.1080/02626667.2014.966722]

39. Mascaro, G. Comparison of Local, Regional, and Scaling Models for Rainfall Intensity–Duration–Frequency Analysis. J. Appl. Meteorol. Climatol.; 2020; 59, pp. 1519-1536. [DOI: https://dx.doi.org/10.1175/JAMC-D-20-0094.1]

40. Coronado-Hernández, Ó.E.; Merlano-Sabalza, E.; Díaz-Vergara, Z.; Coronado-Hernández, J.R. Selection of Hydrological Probability Distributions for Extreme Rainfall Events in the Regions of Colombia. Water; 2020; 12, 1397. [DOI: https://dx.doi.org/10.3390/w12051397]

41. Moccia, B.; Mineo, C.; Ridolfi, E.; Russo, F.; Napolitano, F. Probability Distributions of Daily Rainfall Extremes in Lazio and Sicily, Italy, and Design Rainfall Inferences. J. Hydrol. Reg. Stud.; 2021; 33, 100771. [DOI: https://dx.doi.org/10.1016/j.ejrh.2020.100771]

42. Juma, B.; Olang, L.O.; Hassan, M.; Chasia, S.; Bukachi, V.; Shiundu, P.; Mulligan, J. Analysis of Rainfall Extremes in the Ngong River Basin of Kenya: Towards Integrated Urban Flood Risk Management. Phys. Chem. Earth Parts A/B/C; 2021; 124, 102929. [DOI: https://dx.doi.org/10.1016/j.pce.2020.102929]

43. Bonaccorso, B.; Aronica, G.T. Estimating Temporal Changes in Extreme Rainfall in Sicily Region (Italy). Water Resour. Manag.; 2016; 30, pp. 5651-5670. [DOI: https://dx.doi.org/10.1007/s11269-016-1442-3]

44. Hajani, E.; Rahman, A. Design Rainfall Estimation: Comparison between GEV and LP3 Distributions and at-Site and Regional Estimates. Nat. Hazards; 2018; 93, pp. 67-88. [DOI: https://dx.doi.org/10.1007/s11069-018-3289-9]

45. García-Marín, A.P.; Morbidelli, R.; Saltalippi, C.; Cifrodelli, M.; Estévez, J.; Flammini, A. On the Choice of the Optimal Frequency Analysis of Annual Extreme Rainfall by Multifractal Approach. J. Hydrol.; 2019; 575, pp. 1267-1279. [DOI: https://dx.doi.org/10.1016/j.jhydrol.2019.06.013]

46. Nguyen, V.-T.-V.; Tao, D.; Bourque, A. On Selection of Probability Distributions for Representing Annual Extreme Rainfall Series. Proceedings of the Global Solutions for Urban Drainage; Portland, OR, USA, 8 September 2002; American Society of Civil Engineers: Reston, VA, USA, 2012; pp. 1-10.

47. Fisher, R.A.; Tippett, L.H.C. Limiting Forms of the Frequency Distribution of the Largest or Smallest Member of a Sample. Math. Proc. Camb. Philos. Soc.; 1928; 24, pp. 180-190. [DOI: https://dx.doi.org/10.1017/S0305004100015681]

48. Rahman, A.; Zaman, M.A.; Haddad, K.; El Adlouni, S.; Zhang, C. Applicability of Wakeby Distribution in Flood Frequency Analysis: A Case Study for Eastern Australia. Hydrol. Process.; 2015; 29, pp. 602-614. [DOI: https://dx.doi.org/10.1002/hyp.10182]

49. Anghel, C.G.; Ianculescu, D. Probabilistic Forecasting of Peak Discharges Using L-Moments and Multi-Parameter Statistical Models. Water; 2025; 17, 1908. [DOI: https://dx.doi.org/10.3390/w17131908]

50. Martins, A.L.A.; Liska, G.R.; Beijo, L.A.; Menezes, F.S.d.; Cirillo, M.Â. Generalized Pareto Distribution Applied to the Analysis of Maximum Rainfall Events in Uruguaiana, RS, Brazil. SN Appl. Sci.; 2020; 2, 1479. [DOI: https://dx.doi.org/10.1007/s42452-020-03199-8]

51. Singirankabo, E.; Iyamuremye, E. Modelling Extreme Rainfall Events in Kigali City Using Generalized Pareto Distribution. Meteorol. Appl.; 2022; 29, e2076. [DOI: https://dx.doi.org/10.1002/met.2076]

52. Stephens, M.A. Tests of Fit for the Logistic Distribution Based on the Empirical Distribution Function. Biometrika; 1979; 66, pp. 591-595. [DOI: https://dx.doi.org/10.1093/biomet/66.3.591]

53. Anderson, T.W.; Darling, D.A. Asymptotic Theory of Certain ‘Goodness of Fit’ Criteria Based on Stochastic Processes. Ann. Math. Stat.; 1952; 23, pp. 193-212. [DOI: https://dx.doi.org/10.1214/aoms/1177729437]

54. Filliben, J.J. The Probability Plot Correlation Coefficient Test for Normality. Technometrics; 1975; 17, pp. 111-117. [DOI: https://dx.doi.org/10.1080/00401706.1975.10489279]

55. Hosking, J.R.M. L-Moments: Analysis and Estimation of Distributions Using Linear Combinations of Order Statistics. J. R. Stat. Soc. Ser. B Stat. Methodol.; 1990; 52, pp. 105-124. [DOI: https://dx.doi.org/10.1111/j.2517-6161.1990.tb01775.x]

56. Vogel, R.M.; Fennessey, N.M. L Moment Diagrams Should Replace Product Moment Diagrams. Water Resour. Res.; 1993; 29, pp. 1745-1752. [DOI: https://dx.doi.org/10.1029/93WR00341]

57. Boudrissa, N.; Cheraitia, H.; Halimi, L. Modelling Maximum Daily Yearly Rainfall in Northern Algeria Using Generalized Extreme Value Distributions from 1936 to 2009. Meteorol. Appl.; 2017; 24, pp. 114-119. [DOI: https://dx.doi.org/10.1002/met.1610]

58. Młyński, D.; Wałęga, A.; Petroselli, A.; Tauro, F.; Cebulska, M. Estimating Maximum Daily Precipitation in the Upper Vistula Basin, Poland. Atmosphere; 2019; 10, 43. [DOI: https://dx.doi.org/10.3390/atmos10020043]

59. Nguyen, V.-T.-V.; Nguyen, T.-H. Statistical Modeling of Extreme Rainfall Processes (SMExRain): A Decision Support Tool for Extreme Rainfall Frequency Analyses. Procedia Eng.; 2016; 154, pp. 624-630. [DOI: https://dx.doi.org/10.1016/j.proeng.2016.07.561]

60. Öztekin, T. Wakeby Distribution for Representing Annual Extreme and Partial Duration Rainfall Series. Meteorol. Appl.; 2007; 14, pp. 381-387. [DOI: https://dx.doi.org/10.1002/met.37]

61. Ibrahim, M.N. Generalized Distributions for Modeling Precipitation Extremes Based on the L Moment Approach for the Amman Zara Basin, Jordan. Theor. Appl. Climatol.; 2019; 138, pp. 1075-1093. [DOI: https://dx.doi.org/10.1007/s00704-019-02863-3]

© 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.