Content area
Abstract
Future demands of diesel engines are about low-friction and wear-resistant materials in order to increase the efficiency and achieve environmentally sound solutions. Thus, thermally sprayed Fe-base coatings are investigated for application as cylinder running surfaces in cast aluminum crankcases. They should allow the desired combination of structural, productional, and topographical properties required in Diesel engines. To understand the influence of the characteristic microstructures on the integrity of the composites the coatings have to be examined in laboratory tests in terms of different loading situations. Cavitation tests were carried out where the tribological stability of these coatings and their ability to resist high-frequency cyclic impact stresses are revealed. Composite samples (base material and coating) were investigated in terms of crack initiation in a scanning electron microscope with an in situ 3-point-bending test. The endurance under cyclic mechanical stresses was tested with a 4-point-bending stress controlled test.[PUBLICATION ABSTRACT]