Global Data for Ecology and Epidemiology: A Novel Algorithm for Temporal Fourier Processing MODIS Data

Abstract

Background

Remotely-sensed environmental data from earth-orbiting satellites are increasingly used to model the distribution and abundance of both plant and animal species, especially those of economic or conservation importance. Time series of data from the MODerate-resolution Imaging Spectroradiometer (MODIS) sensors on-board NASA's Terra and Aqua satellites offer the potential to capture environmental thermal and vegetation seasonality, through temporal Fourier analysis, more accurately than was previously possible using the NOAA Advanced Very High Resolution Radiometer (AVHRR) sensor data. MODIS data are composited over 8- or 16-day time intervals that pose unique problems for temporal Fourier analysis. Applying standard techniques to MODIS data can introduce errors of up to 30% in the estimation of the amplitudes and phases of the Fourier harmonics.

Methodology/Principal Findings

We present a novel spline-based algorithm that overcomes the processing problems of composited MODIS data. The algorithm is tested on artificial data generated using randomly selected values of both amplitudes and phases, and provides an accurate estimate of the input variables under all conditions. The algorithm was then applied to produce layers that capture the seasonality in MODIS data for the period from 2001 to 2005.

Conclusions/Significance

Global temporal Fourier processed images of 1 km MODIS data for Middle Infrared Reflectance, day- and night-time Land Surface Temperature (LST), Normalised Difference Vegetation Index (NDVI), and Enhanced Vegetation Index (EVI) are presented for ecological and epidemiological applications. The finer spatial and temporal resolution, combined with the greater geolocational and spectral accuracy of the MODIS instruments, compared with previous multi-temporal data sets, mean that these data may be used with greater confidence in species' distribution modelling.

About the Authors:

Jörn P. W. Scharlemann

Current address: Smithsonian Tropical Research Institute, Balboa, Ancón, Republic of Panamá

Affiliation: Spatial Ecology and Epidemiology Group, Department of Zoology, University of Oxford, Oxford, United Kingdom

David Benz

Affiliation: Spatial Ecology and Epidemiology Group, Department of Zoology, University of Oxford, Oxford, United Kingdom

Simon I. Hay

Affiliations Spatial Ecology and Epidemiology Group, Department of Zoology, University of Oxford, Oxford, United Kingdom, Malaria Public Health and Epidemiology Group, Centre for Geographic Medicine, Kenya Medical Research Institute (KEMRI), University of Oxford, Wellcome Trust Collaborative Programme, Nairobi, Kenya

Bethan V. Purse

Affiliation: Spatial Ecology and Epidemiology Group, Department of Zoology, University of Oxford, Oxford, United Kingdom

Andrew J. Tatem

Affiliations Spatial Ecology and Epidemiology Group, Department of Zoology, University of Oxford, Oxford, United Kingdom, Malaria Public Health and Epidemiology Group, Centre for Geographic Medicine, Kenya Medical Research Institute (KEMRI), University of Oxford, Wellcome Trust Collaborative Programme, Nairobi, Kenya

G. R. William Wint

Affiliation: Spatial Ecology and Epidemiology Group, Department of Zoology, University of Oxford, Oxford, United Kingdom

David J. Rogers

*To whom correspondence should be addressed. E-mail: [email protected]

Affiliation: Spatial Ecology and Epidemiology Group, Department of Zoology, University of Oxford, Oxford, United Kingdom

Introduction

Environmental variables, such as temperature and vegetation greenness, are important determinants of the distributions of many species [1]. The presence or absence of a species in any area is often distinguished not only by the absolute levels of climate or vegetation values, but also by subtle differences in the seasonality of these variables [2], which can only be captured by repeated measurements over time. Such time series may be derived from ground-based meteorological records, but acquiring spatially continuous, global records of these environmental variables is only practical using remotely sensed data from Earth-orbiting satellites. Historically, the National Oceanographic and Atmospheric Administration (NOAA) series of satellites carrying the Advanced Very High Resolution Radiometer (AVHRR) have provided time series of global imagery more or less continuously since 1981 [3]–[5]. These time series have been used to produce, among others, images of Land Surface Temperature (LST) [6] and of the Normalised Difference Vegetation Index (NDVI), a correlate of vegetation productivity, biomass and climatic conditions [7].

Serial correlation among successive observations taken over a period of time reduces the statistical utility of captured imagery. Data reduction (ordination) methods are usually employed to remove these correlations and provide one or more transformed images without such correlation, which can then be used in further analyses or applications. One ordination approach commonly applied to multi-temporal imagery is principal components analysis (PCA, e.g. [8]), but explicit measures of seasonality are lost in the ordination process. PCA thus achieves data reduction at the expense of biological descriptiveness. Alternative methods that retain information about seasonality include polynomial functions [9], [10] and temporal Fourier analysis [11]–[19].

Temporal Fourier analysis (TFA) transforms a series of observations taken at intervals over a period of time into a set of (uncorrelated) sine curves, or harmonics, of different frequencies, amplitudes and phases that collectively sum to the original time series. For many multi-temporal satellite data, the most important harmonics are those that correspond to the annual, bi-annual and tri-annual cycles of seasonal changes, and these harmonics often have a clear biological interpretation [13]. Both longer period cycles (variation on inter-annual scales) and shorter period cycles (high frequency intra-annual variation) can also be identified by TFA, but tend to be less important biologically, as well as in terms of their contributions to the overall variance of the signal [13]. Thus TFA achieves data ordination in a biologically transparent way.

An additional advantage of TFA is that it can be used to smooth noisy data. Fourier analysis moves between the time and frequency domains: forward analysis produces a frequency domain representation of the original time series and inverse analysis moves from the frequency domain back to the time domain. Filtering noisy data is easier in the frequency domain because most noise is associated with high frequencies which can therefore be dropped before inversion to produce a smoothed version of the original time series. Equivalent filtering in the time domain is less straightforward, because the high frequency components are mixed in with all other frequency components and so cannot easily be separated from them. Different degrees of smoothing occur when different frequency ranges are excluded during the filtering process. Here the primary objective is not to smooth the data, but to capture their seasonality. Smoothing should be regarded as an additional advantage of the Fourier approach to capturing seasonality; an advantage that is all the more important when, for various reasons, the satellite signal is above (e.g. sun-glint) or below (e.g. cloud contamination) its correct value.

Until relatively recently, global remotely sensed time series data have been available either with low spatial resolution for long time periods (e.g. 20 years of AVHRR at 8 km resolution) or with higher resolution for a shorter time period (e.g. 4 years of AVHRR at 1.1 km resolution) [20]. These data, when temporal Fourier processed [20], have been used successfully to predict the distributions of species [13], [14], [21]–[27], diseases [2], [17], [28]–[37], endemic bird areas [38], livestock [39], and human poverty [40].

Since 2000, new time series of higher resolution (250 m to 1 km) remotely sensed data from the MODerate-resolution Imaging Spectroradiometer (MODIS) on board the NASA Terra and Aqua satellites have been made freely available to the research community [41]. The advantages of MODIS data over previously available global satellite data include greater repeat frequency with global image collection on an almost daily cycle by each satellite, and enhanced stability of both spectral and geolocational accuracy [42]–[44]. Nevertheless, the quality of MODIS images, as with AVHRR, is affected by atmospheric contamination (clouds and aerosols). MODIS images are therefore composited over 8 or 16 days using cloud-screening algorithms, shorter time intervals than the 10 day (dekads) or one month intervals over which AVHRR images were maximum value composited. Whilst the dekadal and monthly composites of AVHRR data can be analysed by standard temporal Fourier processing methods, since their mean capture dates may be assumed to be spread equally throughout the year, the 8- and 16-day MODIS data present unique problems to such algorithms, because the timing of the samples near year-end do not overlap to give these same inter-sample intervals (a strict requirement of temporal Fourier analysis).

Further problems may arise from data points with very low or “drop-out” values which occur frequently in some pixels despite compositing. These need to be treated carefully during image processing, because they do not represent earth surface conditions at the time of image capture.

Here we present a novel algorithm to deal with both the data drop-outs and the irregular timing problems of MODIS data to produce global 1 km resolution temporal Fourier processed layers that describe the seasonality in MODIS Terra NDVI, Enhanced Vegetation Index (EVI), Middle Infrared (MIR), and daytime and night-time LST for the period 2001 to 2005 inclusive.

Materials and Methods

Data

Time series of nominal 1 km spatial resolution MODIS data from the NASA Terra satellite were downloaded from NASA's EOS data gateway (http://edcimswww.cr.usgs.gov/pub/imswelcome/) for five complete years, January 2001 to December 2005. MODIS data are produced in the sinusoidal projection (MODLAND Sinusoidal Grid) and made available as 460 tiles covering the Earth, each tile measuring 10°×10° and consisting of 1200×1200 0.859 km2 (926.63 m×926.63 m) pixels. All available images per time interval (as of 8 January 2007), called granules, were acquired for 229 tiles, including all tiles between 90°N and 60°S, except for 129 oceanic tiles and 62 tiles containing small islands, for two data sets: MODIS/Terra Land Surface Temperature/Emissivity 8-day L3 Global 1 km SIN grid (MOD11A2, version 4, [45]) and MODIS/Terra Nadir BRDF-Adjusted Reflectance 16-day L3 Global 1 km SIN grid (MOD43B4, version 4, [46]). MODIS data sets are provided in Hierarchical Data Format (HDF), and were imported to ERDAS Imagine 9.0 (Leica Geosystems, Norcross, GA) and converted to ERDAS LAN format.

The MOD11A2 data set comprises 8-day composited land surface temperature (LST) for daytime (dLST) and night-time (nLST) overpasses [45]. A complete time series for each tile of the MOD11A2 data would therefore consist of 46 granules at 8-day intervals for each of five years, or 230 granules in total.

The MOD43B4 data set provides nadir Bidirectional Reflectance Distribution Function (BRDF)-adjusted reflectances for Terra MODIS spectral bands 1–7 computed with the mean solar zenith angle of each 16-day interval over which data were composited [46]. The BRDF removes directional effects of view angle and illumination, providing reflectance values as if every pixel were viewed from nadir. Pre-processing excluded pixels with unreliable BRDF corrections, identified by quality control flags provided with the data set (QC Word 2 value >10). For each pixel a MIR channel (MODIS band 7, 2105–2155 nm) was extracted and the NDVI ([near infrared (NIR)–RED]/[NIR+RED], where NIR is MODIS band 2 and RED is band 1, 841–876 nm and 620–670 nm, respectively) and the EVI (2.5*[[NIR-RED]/[NIR+6.0*RED–7.5*BLUE+1.0]], where BLUE is MODIS band 3, 459–479 nm, [43]) were calculated. The MIR band was selected as being similar to band 3 in AVHRR, which has been shown to correlate with a number of vegetative processes including forest re-growth [47]. A complete MOD43B4 time series for each tile would consist of 23 granules at 16-day intervals for each of five years, or 115 granules in total. Although finer resolution data are available for NDVI and EVI (MODIS/Terra Vegetation Indices 16-day L3 Global 250 m resolution, MOD13Q1), MIR and LST data are only available at 1 km resolution. For consistency across products and given the much greater time involved in processing higher resolution data on a global scale, 1 km resolution data were therefore used for all products.

After temporal Fourier processing (described below), outputs for all five products were mosaicked and georeferenced (parameters in Table S1). Ocean pixels in all output layers were masked using the MODLAND Digital Elevation Model (DEM) and Land/Water Mask version 4, downloaded from ftp://landsc1.nascom.nasa.gov/pub/outgoing/dem_sin_old for all 229 tiles and processed in ERDAS Imagine 9.0 and ArcInfo 9.1 (ESRI, Redlands, CA). Since the MOD11A2 data set had been masked by the version 4 land/water mask prior to production, and this mask did not match the later version 5 mask extents based on MOD43B4 reflectance data [48], the version 4 mask was used throughout. Information on inland water and ephemeral water bodies was also extracted from the MODLAND version 4 land/water mask.

Temporal Fourier analysis

TFA describes environmental cycles, such as temperature, precipitation, and vegetation phenology, as the sum of a series of sine curves with different amplitudes and phases. A time series [xt] may be described by its Fourier series representation [49] where(1)with coefficients [ap, bp] defined as follows, where x̂ is the arithmetic mean of the time series:(2)

The component at a frequency ωp = 2πp/N is called the pth harmonic, and for all p ≠ N/2 these harmonics may be written in the equivalent formwhere(3)and

Full TFA partitions the variability of the time series into orthogonal (i.e. uncorrelated) harmonics at frequencies of 2π/N, 4π/N, 6π/N …, π, or periods equal to 1, ½, 1/3, … 2/N times the duration over which N observations were made. Full TFA exactly describes the original time series, because there are as many harmonic variables (a,b) as there are data points. However, in practice only a few harmonics usually contribute substantially to the overall variance, and only these need to be calculated for most purposes. For the MODIS data only the three harmonics corresponding to the annual, bi-annual and tri-annual seasonal cycles were extracted and saved.

The contribution of each of the N/2 harmonics to explaining the total variance has been shown by Parseval's theorem:(4)where R2p/2 is the contribution of the pth harmonic.

Equation 4 shows that the Fourier harmonics are statistically orthogonal, because the total variance of the time series is described in terms of their harmonics only, and not of their co-variances. However, in contrast to the principal components of PCA, each of the harmonics of TFA has a clear interpretation in terms of intra- and inter-annual cycles of changes in their respective variables [13].

Temporal Fourier analysis applied to artificial data

In applying temporal Fourier analysis to time series data, most standard TFA algorithms require that the data points are equally spaced in time [50]. For the extraction of annual, bi-annual and tri-annual harmonics, the data should be collected or composited at intervals that divide an integer number of times into a 365-day year, with a nominal collection date half-way through each interval. The historic AVHRR data essentially conformed to these requirements (e.g. [20]); each month was divided into 3 dekads (of, on average, just over 10 days' duration), without any difference in timing over year's end. However, MODIS data sets are provided at fixed 8- or 16-day intervals, regardless of calendar dates and always beginning at the start of each year (i.e. the first image of each calendar year always refers to the first 8 or 16 days of the year, counting from January 1st). Not only do these intervals not divide an integer number of times into a year, but the last interval of the previous year overlaps with the first interval in a given year (with the degree of overlap varying between leap and non-leap years).

The MODIS intervals divide into a 365-day year 45.63 or 22.81 times, for the 8- and 16-day intervals, respectively, and either 46 or 23 images per year are produced. The compositing period of the last image of each year therefore overlaps that of the first image of the following year and its nominal sampling date is taken here as exactly one sample interval after that of the previous image. Since the day counter is reset on January 1st each year, this means that there is irregular timing of the images at the end of each year.

Ignoring the effects of both sample interval and unequal timing causes errors in TFA outputs using standard TFA algorithms. The precise extent of these errors was investigated by constructing artificial time series of daily data by summing annual, bi-annual and tri-annual harmonics, whose amplitudes and phases were selected at random from realistic ranges of values (0.05–1.0 for amplitudes and 0–2π for phases). The artificial time series were generated repeatedly (9900 times) and then sampled on exactly the same dates as the mid-points of the MODIS imagery, i.e. artificial MODIS data with known amplitudes and phases were generated. These artificial MODIS time series were then analysed using standard TFA methods (i.e. assuming equal spacing of the imagery) and the outputs (calculated amplitude and phases) were compared, using least-squares linear regression, with the input amplitudes and phases. Analyses were performed using the TFA module in IDRISI Andes (Clark Labs, Worcester, MA) and customised TFA algorithms developed by the authors. There were sufficient discrepancies between the input and output amplitudes and phases (see Results) to merit the development of an alternative approach to eliminate them.

Temporal Fourier analysis of MODIS data

Three problems need to be addressed when TFA processing MODIS data: data drop-out and the two problems of timing in the MODIS data sets (see above). The following processing chain, developed to overcome all three problems, was implemented in QuickBASIC 4.0 (Microsoft, Redmond, WA) and applied to each pixel (Figure 1).

1. i) For each pixel, the full time series was extracted from the LAN files and examined for obvious drop-out values and for missing granules. Drop-out values were identified by low (0) or very high (>32500) digital numbers and removed from the series. If more than 80% of any time series was classified as drop-outs, the TFA output layers were set to zero, indicating that no TFA was possible for this pixel. If 80% or fewer of the values were classified as drop-outs, then the algorithm moved to the next step. This rather high value of 80% was selected so as not to exclude far more pixels–especially in higher latitudes–thus preventing the production of TFA imagery for these regions.

2. ii) The digital numbers of the time series were converted to geophysical values using the scales and offsets of the relevant MODIS product. If these geophysical values were outside a wide range considered reasonable for each product (Table 1), the value for that particular granule was deemed unreliable. Again, if more than 80% of the values in a time series were classified as unreliable, the TFA output layers were set to zero.

3. iii) A pixel passing the first two steps of processing thus potentially contained a suitable time series, although many pixels still had numerous drop-out values. At this stage, missing values were linearly interpolated from adjacent sample dates with acceptable geophysical values. Linear interpolation often spanned multiple missing values, and occasionally was also necessary at the end of the time series, where data wrap-around to the start of the time series was assumed. Linear interpolation was adopted as the simplest gap-filling approach; more complicated methods would have been more time consuming and would involve additional arbitrary decisions (e.g. the number of data points either side of any gap to include in any local, non-linear gap-filling algorithm). In general TFA is itself a non-linear gap-filling routine (from the viewpoint of the entire time series), so that the details of local gap filling are probably immaterial.

4. iv) After linear interpolation of the missing values in the time series, cubic splines were fitted to the time series. These splines not only passed through all the values in the time series, but also joined them smoothly. The spline fits could therefore be calculated at any point in the time series and at user-specified intervals, e.g. daily, 5-day, etc., as required. By sampling the spline fits at the mid points of 5-day intervals throughout the year (beginning at day 2.5), a new time series was produced with 73 5-day interval values per year, making the series suitable for subsequent standard TFA processing.

5. v) The Fourier fit to the time series was produced by summing the mean and annual, bi- and tri-annual cycles (only), and this was compared to the spline-interpolated data. Where the spline-interpolated data departed (both positively and negatively) from the Fourier fit by more than a user-specified threshold (see Table 1) the data were again considered unreliable, removed and linearly interpolated from adjacent, reliable values in the spline-fitted series. TFA was applied again to this new series, examined for departures as before, interpolated if necessary, and Fourier processed again. Re-processing continued until no departures from the current fit exceeded the threshold or until 20 iterations were completed.

[Figure omitted. See PDF.]

Figure 1. Processing chain of MODIS temporal Fourier analysis.

Data storage requirements for each product (in MB) and software used are indicated on the right.

https://doi.org/10.1371/journal.pone.0001408.g001

[Figure omitted. See PDF.]

Table 1. Number of granules used, and permitted geophysical values during temporal Fourier processing.

https://doi.org/10.1371/journal.pone.0001408.t001

The characteristics of these final Fourier fits were saved as a series of output layers, including the mean (a0), amplitudes (a1–a3), and phases (p1–p3), the minimum (mn), maximum (mx) and variance (vr), and the proportions of the signal variance captured by the annual, bi-annual and tri-annual cycles (d1,d2, and d3, respectively) and by all cycles combined (da). The percentage data loss at steps i) and ii), as well as the percentage of departures of the spline-fitted values from the initially fitted Fourier series (step v) were also stored in separate layers (e1–e3), to aid the quality assessment of output layers.

Results

Data

52144 granules were acquired for the MOD11A2 data set, and 25697 for MOD43B4, representing 99.0% and 99.3% of the potential granules respectively (note MOD43B4 data were not produced for 4 tiles north of 80°N). The median number of missing granules per tile was 2 (range 1–6 granules) for MOD11A2 and 0 (0–11) for MOD43B4 (insets in Figure 2). The larger number of missing granules in the MOD11A2 data set was due to a power supply anomaly in the sensor from 16 June to 1 July 2001, preventing data collection during one or two 8-day intervals (Julian day 169 and 177) for every tile. Several granules were missing during the winter months for tiles located at high latitudes, as there was insufficient sunlight to reflect back to the satellite. Other sensor problems and failed storage tapes at the data distribution centre accounted for further missing granules.

[Figure omitted. See PDF.]

Figure 2. Temporal Fourier analysis of global (a) daytime Land Surface Temperature (dLST) and (b) Enhanced Vegetation Index (EVI).

The analyses were based on the period 2001–2005 using 230 images at 8-day intervals for dLST (a) and 115 images at 16-day intervals for EVI (b), both resampled at 5-day intervals after cubic spline interpolation. Data are displayed as three-channel colour composites with the mean, phase and amplitude of the annual harmonic in the red, green and blue channel, respectively. For display purposes, values in each band were stretched across the full range of intensities within the image processing system using histogram equalization. The insets show the 229 MODLAND tiles that were processed, indicating the number of missing granules in each. Data are displayed in MODIS sinusoidal projection.

https://doi.org/10.1371/journal.pone.0001408.g002

Temporal Fourier analysis applied to artificial data

An example time series of the artificial MODIS data subjected to standard TFA is shown in Figure 3a. The slippage between the observed and fitted values at the end of the first year is visible. TFA has assumed an equal interval throughout the 2-year time period of these artificial data, and predicts the signal at these intervals throughout. This assumption affected the estimated values of amplitudes and phases, so that the fitted values (in red) did not capture the signal satisfactorily (obvious at the very first fitted value, but noticeable throughout). This would also occur if only one year's worth of MODIS-type data were analysed by TFA since the method assumes the time series continues, as measured, forever. Application of the new TFA algorithm to the same time series is shown in Figure 3b. The 5-day spline interpolated time series, itself an accurate representation of the input time series, was described very accurately by TFA, and provides more accurate estimates of the input values of mean, amplitudes and phases.

[Figure omitted. See PDF.]

Figure 3. Examples of temporal Fourier processed artificially generated MODIS data for two years using (a) a standard TFA algorithm and (b) a standard TFA algorithm applied to spline-interpolated data.

The signal (black line) is a daily time series artificially generated by summing annual, bi-annual and tri-annual cycles of known, randomly chosen amplitudes and phases. The ‘satellite sample’ (blue vertical lines) samples this signal at the MODIS 16-day interval and on the MODIS mid-sample date, which gives unequal intervals spanning each year end (upper tick marks on x-axis). The Fourier fit (red vertical lines) is the fit to the satellite signal that ignores this beginning/end of year anomaly and thus assumes a constant interval throughout, corresponding to the 23 images per year of the satellite sample (lower tick marks on x-axis). In (b) the daily spline fit (yellow line) is the cubic spline fit to these irregular satellite sample data. The Fourier fit (red vertical lines) is the TFA fit to the spline fit resampled every 5 days (lower tick marks on x-axis). Notice that there are no end-of-year anomalies here, resulting in a more accurate estimate of the harmonics used to generate the signal. The end of year anomaly is also present in MODIS data that run for only one year and hence affects TFA outputs in the same way, but is more clearly demonstrated visually in multi-year data.

https://doi.org/10.1371/journal.pone.0001408.g003

Figure 4 highlights errors in the calculation of both annual amplitudes (Figure 4a) and annual phases (Figure 4b), found when many artificially generated MODIS time series, such as that shown in Figure 3, were subjected to standard TFA and the input amplitudes and phases compared with the TFA-calculated amplitudes and phases. These errors, both positive and negative, appeared to be approximately constant in their absolute values across the range of input values used, with the consequence that the proportional errors were very much greater at smaller input values of amplitude and phase. Thus Fig. 3a shows that using standard TFA, the annual amplitude may be estimated with an error of as little as about ±2% at high amplitude values, but as high as ±20% at low values. The equivalent values for phase are ±3% and ±30%, respectively.

[Figure omitted. See PDF.]

Figure 4. Comparisons between actual and calculated annual amplitudes (a,b) and phases (c,d) for artificially generated MODIS data.

Amplitudes and phases were either calculated by standard temporal Fourier analysis (TFA) using the TFA module in IDRISI Andes (a,c) or by using the TFA algorithm described here (b,d). Lines represent least-squares regression slopes with the following equations: (a) 0.00393+0.99928x, F1,9898  = 1.159e+07, R2 = 0.9991; (b) −9.398e-06+1.0x, F1,9898 = 2.367e+10, R2 = 1.0; and (d) 7.140e-05+1.0x, F1,9898 = 38.9e+10, R2 = 1.0, all highly statistically significant (P<0.001). IDRISI Andes provides phase estimates in radians which are here re-expressed in terms comparable to the input data. Because the points in the upper left part of (c) strongly influence regression calculations, no regression was fitted to these data. Instead, the line of equality (x = y) is shown in (c) to aid visual comparison of the results.

https://doi.org/10.1371/journal.pone.0001408.g004

Spline interpolation and resampling, followed by standard TFA, overcame the two problems of the irregular sampling dates of the raw MODIS data over all ranges of amplitudes and phases tested (Figure 4b,d).

Temporal Fourier analysis of MODIS data

An example of the TFA of an NDVI time series for a single pixel in northern Europe is shown in Figure 5. The Fourier-fitted series, consisting of the summed annual, bi-annual and tri-annual harmonics, provided a good fit to the mean seasonal variation of the observed data (Figure 5a). The annual harmonic dominates the annual cycle of vegetation growth and has a large amplitude, indicating a major change between summer and winter NDVI values (Figure 5b). The second and third harmonics contribute less to the overall fit, but perform the important function of modulating the simple sinusoidal annual cycle. Figure 5b shows that the amplitude and phase of the tri-annual harmonic bring about a flattening and widening of the peak of the annual cycle, and thus improve the fit to the observed signal. The dominance of the annual cycle in Figure 5 is not surprising in a northern temperate habitat. Nearer the equator, and with other vegetation types, the bi-annual and tri-annual harmonics may modulate the annual cycle to a greater extent.

[Figure omitted. See PDF.]

Figure 5. An example of temporal Fourier analysis.

TFA of NDVI from a pixel in the Yorkshire Dales, England (2°W, 54°N) for the years 2001–2005. (a) shows the observed NDVI time series (squares), the resampled cubic spline-fitted data (crosses and line), the five year mean synoptic annual series (thick black line, displaced by −0.1 to ease viewing), and the Fourier fit (grey line), i.e. the sum of the annual, bi-annual and tri-annual harmonics of the TFA. Drop-out values are shown as −0.2. Details of the annual (solid line), bi-annual (dashed) and tri-annual (dotted) harmonics are shown in (b). The sum of these three harmonics is shown in grey for 1.5 years, as in (a). The horizontal line represents the overall mean and the vertical lines indicate the phase (timing) of the first peak of each of the Fourier harmonics in year 2001. The inset magnifies one year.

https://doi.org/10.1371/journal.pone.0001408.g005

Global output layers of TFA for dLST and EVI for 2001–2005 are displayed in Figure 2 as three-channel colour composites, showing the mean, phase and amplitude of the first Fourier harmonic in the red, green and blue channels respectively. In Figure 2, areas in red indicate where the mean values are high and relatively constant throughout the year; those in bright green indicate where both mean and annual amplitude values are low and the peak values are reached later in the year; and those in bright blue indicate where the mean is relatively low, the peak occurs relatively early in the year and the annual amplitude of the signal is very pronounced. Areas in yellow ( = red+green), therefore, indicate high mean values and late peaks in the signal's annual cycle, and those in purple ( = red+blue) indicate high mean values and high annual amplitudes with early peaks. A little experience with this RGB colour scheme allows a direct, visual interpretation of habitat seasonality.

To gain a more regional view, as well as display all Fourier harmonics, Figure 6 provides a selection of the 17 output layers for EVI across Africa. Specifications for all output layers for all products are given in Table S2.

[Figure omitted. See PDF.]

Figure 6. Selection of MODIS Enhanced Vegetation Index (EVI) temporal Fourier-processed output layers.

Panels show: (a) mean, (b) the percentage of missing values in the time series and (c) the proportion of variance in the original time series described by annual, bi-annual, and tri-annual cycles combined. Amplitude of the (d) annual, (e) bi-annual, and (f) tri-annual cycle are shown in addition to the phase of the (g) annual , (h) bi-annual, and (i) tri-annual cycle in months. Data are histogram-equalized for display from minimum (black) to maximum value (white). A coastline was added to (b) to show the missing values (white) more clearly. Data are displayed in the MODIS sinusoidal projection.

https://doi.org/10.1371/journal.pone.0001408.g006

Overall, the first three Fourier harmonics describe the observed seasonal pattern fairly well as shown by the percentage of variance explained (for MIR 55.7±23.9 [mean±SD], NDVI 58.8±32.1, EVI 51.9±30.6, dLST 83.1±21.0, nLST 79.1±24.7). The high level of variation around these global mean values of explained variance is often associated with habitat types. For example, deciduous woodland savannah vegetation shows a marked seasonality in NDVI and EVI, and a large proportion of the total variance of the signal is explained by the sum of the variances of the annual, bi-annual and tri-annual harmonics. Evergreen tropical rainforests on the other hand, do not show so much seasonality in the vegetation indices, and much of this variation appears to be noise; in these habitats the sum of the annual, bi-annual and tri-annual variances does not explain a large percentage of the (lower total) signal variance.

Discussion

The processing chain presented here provides a powerful method for reliably and accurately capturing the synoptic seasonal dynamics of several environmental variables derived from the MODIS sensor. Major characteristics of the seasonality of each environmental variable can be described by only three Fourier harmonics involving seven variables (the mean, three amplitudes and three phases). Compared to the full time series, this represents a 16-fold reduction for reflectance-derived products collected at 16-day intervals (115 granules/7 output layers) and a 32-fold reduction for temperature products at 8-day intervals (230/7). These Fourier processed Terra MODIS data provide enhanced descriptions of the seasonality of natural environments at finer spatial and temporal resolution, compared with previous data sets (e.g. AVHRR) and thus should allow refined predictions of species' distributions.

Critique of data and processing methodology

Although MODIS provides some of the finest spatial resolution multi-temporal global imagery available, several inescapable problems remain. The data are provided with a geolocational accuracy of 50 m (1σ) at nadir [44], but within a time series, pixels are viewed at different view angles with each repeat observation. The view angle determines the actual area of the Earth's surface observed by each pixel. Due to sensor geometry and the Earth's curvature, MODIS scans are elongated so that at the scan edge with high view zenith angles, the surface area actually viewed by one pixel is twice as long and 4.8 times wider than at nadir (the so-called “bow-tie” effect, [44]). Therefore each granule in a time series for a pixel relates to a different surface area on the Earth, depending on the view zenith angle (“pixel shift”, [51]). This might be overcome by excluding pixels with high view zenith angles during compositing or by aggregating pixels to coarser resolution [51].

Despite a high repeat frequency and a five year time series, insufficient reliable data were available to permit TFA in several cloudy or dark regions, e.g. the coastal regions of Nigeria and Cameroon in West Africa, the mountains of Venezuela, and many high latitude regions (see Figure 2, Figure 6b). Cloud contamination occurs at the same time each year in many of these regions, making elimination of such data gaps difficult. As longer time series become available, these gaps are more likely to be filled, although TFA will then first require some averaging across several years' of data.

Land surface temperatures, especially nLST, were noticeably lower over inland waters and their surrounding land pixels compared with more distant land pixels. This was due to cloud contamination above the inland waters, especially at night-time. The MODLAND land/water mask, which allows identification of inland and ephemeral water bodies, is therefore included within the data archive.

In addition to these geophysical constraints, there was a processing problem whereby the pixels in the westernmost column and northernmost row of each LST tile have lower values than the adjacent pixels, especially noticeable with nLST. This was due to simplifications in the MOD11A2 processing algorithm necessitated by processing limitations (Z. Wan, pers. comm.). Swath edges are clearly visible in the LST input and output layers. These problems are being resolved in future releases of the MOD11A2 data set (Z. Wan, pers. comm.).

The algorithm presented here first identified and then interpolated drop-out or suspect values, as these can affect the calculated TFA values if they are ignored rather than interpolated. Whilst other, non-linear interpolation methods may produce better TFA results than the linear interpolation used here, it was felt that the additional processing time required was not merited. Local, non-linear interpolation brings its own problems, e.g. choice of the range of data points over which to interpolate. TFA of the linearly interpolated results is itself a non-linear smoother of the entire time series, and so brings with it the advantages of global rather than local smoothing.

Although TFA as applied here provides a highly efficient data reduction method, capturing the seasonality of a time series for a synoptic year, it assumes that there were no longer-term cycles of any importance, or directional changes over time. Longer-term cycles may be captured by including multi-year Fourier harmonics in the output data sets, whilst trends may be captured by carrying out TFA over shorter periods of time, e.g. single year, 2 years, etc. and then looking for trends in the output layers (means, amplitudes and phases). However, whilst both longer-term cycles and trends can be important for investigating range changes and dynamics, the synoptic Fourier harmonics presented here should be sufficient for most species distribution modelling requirements that generally rely on historic data, often collected over long periods of time.

Future

Longer time series of MODIS data offer several advantages. First, TFA of longer time series provides more representative measures of seasonality and allows assessment of change over time. Second, data gaps due to prolonged cloud contamination have a higher probability of being filled.

With the release of version 5 MODIS data sets, produced with improved processing algorithms, many of the problems highlighted above should be eliminated. Availability of finer spatial resolution (500 and 250 m) data sets will provide more locational detail. In the future, more accurate data sets will become available by combining data gathered by the Terra and Aqua satellites, both carrying the MODIS sensor. Other products, such as rainfall, vapour pressure deficit, evapotranspiration and snow cover are also suitable for TFA, although the abrupt nature of snow and rainfall (close to zero for some of the year, with intense periods at other times) may require more than three harmonics to fit the time series satisfactorily.

Whilst the Terra satellite is already beyond its originally scheduled operational lifespan, NASA appears to be committed to maintain the supply of MODIS data until the sensor becomes non-operational or until c. 2013 when the Visible/Infrared Imager/Radiometer Suite (VIIRS) sensor is scheduled to begin acquiring data. Barring accidents or unexpected equipment failures, it is thought that the MODIS sensor might continue working for another c. 6 years.

These global temporal Fourier processed MODIS data layers for 2001–2005 represent a new and valuable resource for the scientific community, and are available to collaborators upon request.

Supporting Information

[Figure omitted. See PDF.]

Table S1.

Geo-referencing information for global MODIS data.

https://doi.org/10.1371/journal.pone.0001408.s001

(0.04 MB DOC)

Table S2.

Description of Temporal Fourier Analysis output layers. The table gives details of scaling factors to be applied to the data (i.e. the digital numbers, x, stored in the files), the resulting data units and observed geophysical ranges. The minimum (mn) and maximum (mx) layers are derived from the TFA fit to the data and may therefore occasionally exceed the possible geophysical limits. In the absence of data drop-outs, the mean (a0) would also be the arithmetic mean of the input data; in practice the TFA mean is the arithmetic mean of the interpolated satellite data to which the final Fourier fit is made.

https://doi.org/10.1371/journal.pone.0001408.s002

(0.22 MB DOC)

Acknowledgments

We thank the NASA LP DAAC for making MODIS data available; Brett Lien (NASA LP DAAC) for help with downloading raw data; and Crystal Schaaf, Jicheng Liu (Boston University) and Zhengming Wan (University of California, Santa Barbara) for helping us to understand the intricacies of MODIS data sets.

Author Contributions

Conceived and designed the experiments: DR. Performed the experiments: AT JS DR DB. Analyzed the data: AT JS DR. Contributed reagents/materials/analysis tools: AT JS DR. Wrote the paper: SH AT JS BP DR DB GW. Other: Wrote first draft of the paper: JS.

Citation: Scharlemann JPW, Benz D, Hay SI, Purse BV, Tatem AJ, Wint GRW, et al. (2008) Global Data for Ecology and Epidemiology: A Novel Algorithm for Temporal Fourier Processing MODIS Data. PLoS ONE3(1): e1408. https://doi.org/10.1371/journal.pone.0001408

References

1. Andrewartha H, Birch L (1954) The distribution and abundance of animals. Chicago: University of Chicago Press. H. AndrewarthaL. Birch1954The distribution and abundance of animals.ChicagoUniversity of Chicago Press

2. Rogers DJ, Randolph SE, Snow RW, Hay SI (2002) Satellite imagery in the study and forecast of malaria. Nature 415: 710–715.DJ RogersSE RandolphRW SnowSI Hay2002Satellite imagery in the study and forecast of malaria.Nature415710715

3. Myneni RB, Keeling CD, Tucker CJ, Asrar G, Nemani RR (1997) Increased plant growth in the northern high latitudes from 1981 to 1991. Nature 386: 698–702.RB MyneniCD KeelingCJ TuckerG. AsrarRR Nemani1997Increased plant growth in the northern high latitudes from 1981 to 1991.Nature386698702

4. Myneni RB, Tucker CJ, Asrar G, Keeling CD (1998) Interannual variations in satellite-sensed vegetation index data from 1981 to 1991. Journal of Geophysical Research-Atmospheres 103: 6145–6160.RB MyneniCJ TuckerG. AsrarCD Keeling1998Interannual variations in satellite-sensed vegetation index data from 1981 to 1991.Journal of Geophysical Research-Atmospheres10361456160

5. Nemani RR, Keeling CD, Hashimoto H, Jolly WM, Piper SC, et al. (2003) Climate-driven increases in global terrestrial net primary production from 1982 to 1999. Science 300: 1560–1563.RR NemaniCD KeelingH. HashimotoWM JollySC Piper2003Climate-driven increases in global terrestrial net primary production from 1982 to 1999.Science30015601563

6. Hay SI, Lennon JJ (1999) Deriving meteorological variables across Africa for the study and control of vector-borne disease: a comparison of remote sensing and spatial interpolation of climate. Tropical Medicine & International Health 4: 58–71.SI HayJJ Lennon1999Deriving meteorological variables across Africa for the study and control of vector-borne disease: a comparison of remote sensing and spatial interpolation of climate.Tropical Medicine & International Health45871

7. Pettorelli N, Vik JO, Mysterud A, Gaillard J-M, Tucker CJ, et al. (2005) Using the satellite-derived NDVI to assess ecological responses to environmental change. Trends in Ecology & Evolution 20: 503–510.N. PettorelliJO VikA. MysterudJ-M GaillardCJ Tucker2005Using the satellite-derived NDVI to assess ecological responses to environmental change.Trends in Ecology & Evolution20503510

8. Eastman JR, Fulk M (1993) Long sequence time series evaluation using standardized principal components. Photogrammetric Engineering & Remote Sensing 59: 991–996.JR EastmanM. Fulk1993Long sequence time series evaluation using standardized principal components.Photogrammetric Engineering & Remote Sensing59991996

9. Jönsson P, Eklundh L (2002) Seasonality extraction by function fitting to time-series of satellite sensor data. IEEE Transactions on Geoscience and Remote Sensing 40: 1824–1832.P. JönssonL. Eklundh2002Seasonality extraction by function fitting to time-series of satellite sensor data.IEEE Transactions on Geoscience and Remote Sensing4018241832

10. Jönsson P, Eklundh L (2004) TIMESAT-a program for analyzing time-series of satellite sensor data. Computers & Geosciences 30: 833–845.P. JönssonL. Eklundh2004TIMESAT-a program for analyzing time-series of satellite sensor data.Computers & Geosciences30833845

11. Menenti M, Azzali S, Verhoef W, van Swol R (1993) Mapping agroecological zones and time lag in vegetation growth by means of fourier analysis of time series of NDVI images. Advances in Space Research 13: 233–237.M. MenentiS. AzzaliW. VerhoefR. van Swol1993Mapping agroecological zones and time lag in vegetation growth by means of fourier analysis of time series of NDVI images.Advances in Space Research13233237

12. Andres L, Salas WA, Skole D (1994) Fourier analysis of multi-temporal AVHRR data applied to a land cover classification. International Journal of Remote Sensing 15: 1115–1121.L. AndresWA SalasD. Skole1994Fourier analysis of multi-temporal AVHRR data applied to a land cover classification.International Journal of Remote Sensing1511151121

13. Rogers DJ, Williams BG (1994) Tsetse distribution in Africa: seeing the wood and the trees. In: Edwards PJ, May R, Webb NR, editors. Large-scale ecology and conservation biology. Oxford: Blackwell Scientific. pp. 247–271.DJ RogersBG Williams1994Tsetse distribution in Africa: seeing the wood and the trees.PJ EdwardsR. MayNR WebbLarge-scale ecology and conservation biologyOxfordBlackwell Scientific247271

14. Rogers DJ, Hay SI, Packer MJ (1996) Predicting the distribution of tsetse flies in West Africa using temporal Fourier processed meteorological satellite data. Annals of Tropical Medicine and Parasitology 90: 225–241.DJ RogersSI HayMJ Packer1996Predicting the distribution of tsetse flies in West Africa using temporal Fourier processed meteorological satellite data.Annals of Tropical Medicine and Parasitology90225241

15. Verhoef W, Menenti M, Azzali S (1996) A colour composite of NOAA-AVHRR-NDVI based on time series (1981–1992). International Journal of Remote Sensing 17: 231–235.W. VerhoefM. MenentiS. Azzali1996A colour composite of NOAA-AVHRR-NDVI based on time series (1981–1992).International Journal of Remote Sensing17231235

16. Roerink GJ, Menenti M, Verhoef W (2000) Reconstructing cloudfree NDVI composites using Fourier analysis of time series. International Journal of Remote Sensing 21: 1911–1917.GJ RoerinkM. MenentiW. Verhoef2000Reconstructing cloudfree NDVI composites using Fourier analysis of time series.International Journal of Remote Sensing2119111917

17. Rogers DJ (2000) Satellites, space, time and the African trypanosomiases. Advances in Parasitology 47: 129–171.DJ Rogers2000Satellites, space, time and the African trypanosomiases.Advances in Parasitology47129171

18. Jun W, Zhongbo S, Yaoming M (2004) Reconstruction of a cloud-free vegetation index time series for the Tibetan Plateau. Mountain Research and Development 24: 348–353.W. JunS. ZhongboM. Yaoming2004Reconstruction of a cloud-free vegetation index time series for the Tibetan Plateau.Mountain Research and Development24348353

19. Julien Y, Sobrino JA, Verhoef W (2006) Changes in land surface temperatures and NDVI values over Europe between 1982 and 1999. Remote Sensing of Environment 103: 43–55.Y. JulienJA SobrinoW. Verhoef2006Changes in land surface temperatures and NDVI values over Europe between 1982 and 1999.Remote Sensing of Environment1034355

20. Hay SI, Tatem AJ, Graham AJ, Goetz SJ, Rogers DJ (2006) Global environmental data for mapping infectious disease distribution. Advances in Parasitology 62: 37–77.SI HayAJ TatemAJ GrahamSJ GoetzDJ Rogers2006Global environmental data for mapping infectious disease distribution.Advances in Parasitology623777

21. Baylis M, Mellor PS, Wittmann EJ, Rogers DJ (2001) Prediction of areas around the Mediterranean at risk of bluetongue by modelling the distribution of its vector using satellite imaging. Veterinary Record 149: 639–643.M. BaylisPS MellorEJ WittmannDJ Rogers2001Prediction of areas around the Mediterranean at risk of bluetongue by modelling the distribution of its vector using satellite imaging.Veterinary Record149639643

22. Hendrickx G, Napala A, Slingenbergh JHW, De Deken R, Rogers DJ (2001) A contribution towards simplifying area-wide tsetse surveys using medium resolution meteorological satellite data. Bulletin of Entomological Research 91: 333–346.G. HendrickxA. NapalaJHW SlingenberghR. De DekenDJ Rogers2001A contribution towards simplifying area-wide tsetse surveys using medium resolution meteorological satellite data.Bulletin of Entomological Research91333346

23. Rogers DJ, Robinson TP (2004) Tsetse distribution. In: Maudlin I, Holmes PH, Miles MA, editors. The Trypanosomiases. Wallingford: CABI Publishing. pp. 129–179.DJ RogersTP Robinson2004Tsetse distribution.I. MaudlinPH HolmesMA MilesThe TrypanosomiasesWallingfordCABI Publishing129179

24. Robinson TP, Rogers DJ, Williams B (1996) Mapping tsetse habitat suitability in the Common Fly Belt of Southern Africa using multivariate analysis of climate and remotely sensed vegetation data. Medical and Veterinary Entomology 11: 235–245.TP RobinsonDJ RogersB. Williams1996Mapping tsetse habitat suitability in the Common Fly Belt of Southern Africa using multivariate analysis of climate and remotely sensed vegetation data.Medical and Veterinary Entomology11235245

25. Tatem AJ, Baylis M, Mellor PS, Purse BV, Capela R, et al. (2003) Prediction of bluetongue vector distribution in Europe and north Africa using satellite imagery. Veterinary Microbiology 97: 13–29.AJ TatemM. BaylisPS MellorBV PurseR. Capela2003Prediction of bluetongue vector distribution in Europe and north Africa using satellite imagery.Veterinary Microbiology971329

26. Purse BV, Tatem AJ, Caracappa S, Rogers DJ, Mellor PS, et al. (2004) Modelling the distribution of Culicoides bluetongue virus vectors in Sicily in relation to satellite-derived climate variables. Medical and Veterinary Entomology 18: 90–101.BV PurseAJ TatemS. CaracappaDJ RogersPS Mellor2004Modelling the distribution of Culicoides bluetongue virus vectors in Sicily in relation to satellite-derived climate variables.Medical and Veterinary Entomology1890101

27. McPherson JM, Jetz W (2007) Effects of species' ecology on the accuracy of distribution models. Ecography 30: 135–151.JM McPhersonW. Jetz2007Effects of species' ecology on the accuracy of distribution models.Ecography30135151

28. Rogers DJ, Randolph SE (2003) Studying the global distribution of infectious diseases using GIS and RS. Nature Reviews Microbiology 1: 231–237.DJ RogersSE Randolph2003Studying the global distribution of infectious diseases using GIS and RS.Nature Reviews Microbiology1231237

29. Hendrickx G, Napala A, Slingenbergh JHW, De Deken R, Vercruysse J, et al. (2000) The spatial pattern of trypanosomosis prevalence predicted with the aid of satellite imagery. Parasitology 120: 121–134.G. HendrickxA. NapalaJHW SlingenberghR. De DekenJ. Vercruysse2000The spatial pattern of trypanosomosis prevalence predicted with the aid of satellite imagery.Parasitology120121134

30. Rogers DJ, Myers MF, Tucker CJ, Smith PF, White DJ, et al. (2002) Predicting the distribution of West Nile Fever. Photogrammetric Engineering and Remote Sensing 68: 112–114.DJ RogersMF MyersCJ TuckerPF SmithDJ White2002Predicting the distribution of West Nile Fever.Photogrammetric Engineering and Remote Sensing68112114

31. Omumbo JA, Hay SI, Goetz SJ, Snow RW, Rogers DJ (2002) Updating historical maps of malaria transmission intensity in East Africa using remote sensing. Photogrammetric Engineering and Remote Sensing 68: 161–166.JA OmumboSI HaySJ GoetzRW SnowDJ Rogers2002Updating historical maps of malaria transmission intensity in East Africa using remote sensing.Photogrammetric Engineering and Remote Sensing68161166

32. Randolph SE, Green RM, Peacey MF, Rogers DJ (2000) Seasonal synchrony: the key to tick-borne encephalitis foci identified by satellite data. Parasitology 121: 15–23.SE RandolphRM GreenMF PeaceyDJ Rogers2000Seasonal synchrony: the key to tick-borne encephalitis foci identified by satellite data.Parasitology1211523

33. Randolph SE, Rogers DJ (2006) Tick-borne disease systems: mapping geographic and phylogenetic space. Advances in Parasitology 62: 263–291.SE RandolphDJ Rogers2006Tick-borne disease systems: mapping geographic and phylogenetic space.Advances in Parasitology62263291

34. Omumbo JA, Hay SI, Snow RW, Tatem AJ, Rogers DJ (2005) Modelling malaria risk in East Africa at high-spatial resolution. Tropical Medicine & International Health 10: 557–566.JA OmumboSI HayRW SnowAJ TatemDJ Rogers2005Modelling malaria risk in East Africa at high-spatial resolution.Tropical Medicine & International Health10557566

35. Rogers DJ, Wilson AJ, Hay SI, Graham AJ (2006) The global distribution of yellow fever and dengue. Advances in Parasitology 62: 181–220.DJ RogersAJ WilsonSI HayAJ Graham2006The global distribution of yellow fever and dengue.Advances in Parasitology62181220

36. Gilbert M, Mitchell A, Bourn D, Mawdsley J, Cliton-Hadley R, et al. (2005) Cattle movements and bovine tuberculosis in Great Britain. Nature 435: 491–496.M. GilbertA. MitchellD. BournJ. MawdsleyR. Cliton-Hadley2005Cattle movements and bovine tuberculosis in Great Britain.Nature435491496

37. Wint GRW, Robinson TP, Bourn DM, Durr PA, Hay SI, et al. (2002) Mapping bovine tuberculosis in Great Britain using environmental data. Trends in Microbiology 10: 441–444.GRW WintTP RobinsonDM BournPA DurrSI Hay2002Mapping bovine tuberculosis in Great Britain using environmental data.Trends in Microbiology10441444

38. Johnson DDP, Hay SI, Rogers DJ (1998) Contemporary environmental correlates of endemic bird areas derived from meteorological satellite sensors. Proceedings of the Royal Society of London Series B-Biological Sciences 265: 951–959.DDP JohnsonSI HayDJ Rogers1998Contemporary environmental correlates of endemic bird areas derived from meteorological satellite sensors.Proceedings of the Royal Society of London Series B-Biological Sciences265951959

39. FAO (2007) Gridded Livestock of the World. Rome: Food and Agriculture Organisation of the United Nations Animal Production and Health Division and Environmental Research Group Oxford. FAO2007Gridded Livestock of the World.RomeFood and Agriculture Organisation of the United Nations Animal Production and Health Division and Environmental Research Group Oxford

40. Rogers DJ, Emwanu T, Robinson TP (2006) Poverty mapping in Uganda: an analysis using remotely sensed and other environmental data. Pro-Poor Livestock Policy Initiative (PPLPI) Working Paper No. 36. Rome: Food and Agriculture Organisation of the United Nations. DJ RogersT. EmwanuTP Robinson2006Poverty mapping in Uganda: an analysis using remotely sensed and other environmental data. Pro-Poor Livestock Policy Initiative (PPLPI) Working Paper No. 36.RomeFood and Agriculture Organisation of the United Nations

41. Justice CO, Vermote E, Townshend JRG, Defries R, Roy DP, et al. (1998) The Moderate Resolution Imaging Spectroradiometer (MODIS): Land remote sensing for global change research. IEEE Transactions on Geoscience and Remote Sensing 36: 1228–1249.CO JusticeE. VermoteJRG TownshendR. DefriesDP Roy1998The Moderate Resolution Imaging Spectroradiometer (MODIS): Land remote sensing for global change research.IEEE Transactions on Geoscience and Remote Sensing3612281249

42. Friedl MA, McIver DK, Hodges JCF, Zhang XY, Muchoney D, et al. (2002) Global land cover mapping from MODIS: algorithms and early results. Remote Sensing of Environment 83: 287–302.MA FriedlDK McIverJCF HodgesXY ZhangD. Muchoney2002Global land cover mapping from MODIS: algorithms and early results.Remote Sensing of Environment83287302

43. Huete A, Didan K, Miura T, Rodriguez EP, Gao X, et al. (2002) Overview of the radiometric and biophysical performance of the MODIS vegetation indices. Remote Sensing of Environment 83: 195–213.A. HueteK. DidanT. MiuraEP RodriguezX. Gao2002Overview of the radiometric and biophysical performance of the MODIS vegetation indices.Remote Sensing of Environment83195213

44. Wolfe RE, Nishihama M, Fleig AJ, Kuyper JA, Roy DP, et al. (2002) Achieving sub-pixel geolocation accuracy in support of MODIS land science. Remote Sensing of Environment 83: 31–49.RE WolfeM. NishihamaAJ FleigJA KuyperDP Roy2002Achieving sub-pixel geolocation accuracy in support of MODIS land science.Remote Sensing of Environment833149

45. Wan Z, Li Z-l (1997) A physics-based algorithm for retrieving land-surface emissivity and temperature from EOS/MODIS data. IEEE Transactions on Geoscience and Remote Sensing 35: 980–996.Z. WanZ-l Li1997A physics-based algorithm for retrieving land-surface emissivity and temperature from EOS/MODIS data.IEEE Transactions on Geoscience and Remote Sensing35980996

46. Schaaf CB, Gao F, Strahler AH, Lucht W, Li X, et al. (2002) First operational BRDF, albedo nadir reflectance products from MODIS. Remote Sensing of Environment 83: 135–148.CB SchaafF. GaoAH StrahlerW. LuchtX. Li2002First operational BRDF, albedo nadir reflectance products from MODIS.Remote Sensing of Environment83135148

47. Boyd DS, Curran PJ (1998) Using remote sensing to reduce uncertainties in the global carbon budget: the potential of radiation acquired in middle infrared wavelengths. Remote Sensing Reviews 16: 293–327.DS BoydPJ Curran1998Using remote sensing to reduce uncertainties in the global carbon budget: the potential of radiation acquired in middle infrared wavelengths.Remote Sensing Reviews16293327

48. Salomon J, Hodges JCF, Friedl M, Schaaf C, Strahler A, et al. (2004) Global land-water mask derived from MODIS Nadir BRDF-adjusted reflectances (NBAR) and the MODIS land cover algorithm. Geoscience and Remote Sensing Symposium, 2004 IGARSS '04 Proceedings 2004 IEEE International 1: 241.J. SalomonJCF HodgesM. FriedlC. SchaafA. Strahler2004Global land-water mask derived from MODIS Nadir BRDF-adjusted reflectances (NBAR) and the MODIS land cover algorithm.Geoscience and Remote Sensing Symposium, 2004 IGARSS '04 Proceedings 2004 IEEE International1241

49. Chatfield C (1980) The analysis of time-series: an introduction. London: Chapman & Hall. C. Chatfield1980The analysis of time-series: an introduction.LondonChapman & Hall

50. Press WH, Teukolsky SA, Vetterling WT, Flannery BP (1996) Numerical Recipes in Fortran 77: The Art of Scientific Computing Vol. 1 of Fortran Numerical Recipes. Cambridge: Cambridge University Press. WH PressSA TeukolskyWT VetterlingBP Flannery1996Numerical Recipes in Fortran 77: The Art of Scientific Computing Vol. 1 of Fortran Numerical Recipes.CambridgeCambridge University Press

51. Tan B, Woodcock CE, Hu J, Zhang P, Ozdogan M, et al. (2006) The impact of gridding artifacts on the local spatial properties of MODIS data: Implications for validation, compositing, and band-to-band registration across resolutions. Remote Sensing of Environment 105: 98–114.B. TanCE WoodcockJ. HuP. ZhangM. Ozdogan2006The impact of gridding artifacts on the local spatial properties of MODIS data: Implications for validation, compositing, and band-to-band registration across resolutions.Remote Sensing of Environment10598114