It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Optical rectennas, which are micro-antennas to convert optical-frequency radiation to alternating current combined with ultrahigh-speed diodes to rectify the current, can in principle provide high conversion efficiency solar cells and sensitive detectors. Currently investigated optical rectennas using metal/insulator/metal (MIM) diodes are limited in their RC response time and poor impedance matching between diodes and antennas. A new rectifier, the geometric diode, can overcome these limitations. The thesis work has been to develop geometric diode rectennas, along with improving fabrication processes for MIM diode rectennas. The geometric diode consists of a conducting thin-film, currently graphene, patterned into a geometry that leads to diode behavior. In contrast with MIM diodes that have parallel plate electrodes, the planar structure of the geometric diode provides a low RC time constant, on the order of 10-15 s, which permits operation at optical frequencies. Fabricated geometric diodes exhibit asymmetric DC current-voltage characteristics that match well with Monte Carlo simulations based on the Drude model. The measured diode responsivity at DC and zero drain-source bias is 0.012 A/W. Since changing the gate voltage changes the graphene charge carrier concentration and can switch the majority charge type, the rectification polarity of the diode can be reversed. Furthermore, the optical rectification at 28 THz has been measured from rectennas formed by coupling geometric diodes with graphene and metal bowtie antennas. The performance of the rectenna IR detector is among the best reported uncooled IR detectors. The noise equivalent power (NEP) of the rectenna detector using geometric diode was measured to be 2.3 nW Hz-1/2. Further improvement in the diode and antenna design is expected to increase the detector performance by at least a factor of two. Applications for geometric diodes and graphene bowtie antennas include detection of terahertz and optical waves, ultra-high speed electronics, and optical power conversion.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer