Full text

Turn on search term navigation

ARTICLE

Received 6 Nov 2015 | Accepted 3 Dec 2015 | Published 27 Jan 2016

Rinaldo Trotta1, Javier Martn-Snchez1, Johannes S. Wildmann1, Giovanni Piredda2, Marcus Reindl1, Christian Schimpf1, Eugenio Zallo3,4, Sandra Stroj2, Johannes Edlinger2 & Armando Rastelli1

The prospect of using the quantum nature of light for secure communication keeps spurring the search and investigation of suitable sources of entangled photons. A single semiconductor quantum dot is one of the most attractive, as it can generate indistinguishable entangled photons deterministically and is compatible with current photonic-integration technologies. However, the lack of control over the energy of the entangled photons is hampering the exploitation of dissimilar quantum dots in protocols requiring the teleportation of quantum entanglement over remote locations. Here we introduce quantum dot-based sources of polarization-entangled photons whose energy can be tuned via three-directional strain engineering without degrading the degree of entanglement of the photon pairs. As a test-bench for quantum communication, we interface quantum dots with clouds of atomic vapours, and we demonstrate slow-entangled photons from a single quantum emitter. These results pave the way towards the implementation of hybrid quantum networks where entanglement is distributed among distant parties using optoelectronic devices.

DOI: 10.1038/ncomms10375 OPEN

Wavelength-tunable sources of entangled photons interfaced with atomic vapours

1 Institute of Semiconductor and Solid State Physics, Johannes Kepler University Linz, Altenbergerstr. 69, A-4040 Linz, Austria. 2 Forschungszentrum Mikrotechnik, FH Vorarlberg, Hochschulstr. 1, A-6850 Dornbirn, Austria. 3 Institute for Integrative Nanosciences, IFW Dresden, Helmholtzstr. 20, D-01069 Dresden, Germany. 4 Paul-Drude-Institut fr Festkrperelektronik, Hausvogteilplatz 5-7, 10117 Berlin, Germany. Correspondence and requests for materials should be addressed to R.T. (email: mailto:[email protected]

Web End [email protected] ).

NATURE COMMUNICATIONS | 7:10375 | DOI: 10.1038/ncomms10375 | http://www.nature.com/naturecommunications

Web End =www.nature.com/naturecommunications 1

ARTICLE NATURE COMMUNICATIONS | DOI: 10.1038/ncomms10375

The possibility of exploiting quantum effects in the solid state for quantum communication applications is nowadays one of the main driving forces behind current

research efforts on semiconductor nanostructures. While the investigation of single nanostructures as hosts or sources of quantum bits is already advanced, using several of them for the envisioned applications requires an important challenge to be overcome: nanostructures are not identical and their properties cannot be predicted with the desired accuracy, a property arising from our limited capability to control their fabrication processes with atomic-scale precision1. A prominent example is represented by semiconductor quantum dots (QDs)2. During the radiative decay of a conned biexciton XX, these nanostructures can generate entangled photon pairs36 with high efciency79, high degree of entanglement911, high indistinguishability12,13, and in contrast to parametric down-conversion14 and four-wave mixing15 sourcesthey can deliver photons deterministically12,16. Compared with other single quantum emitters17, QDs have the advantage of being compatible with the mature semiconductor technology18,19. For these reasons, it has been recently argued that they have the potential to become the perfect sources of entangled photons20. In spite of these accomplishments, there are two points that are often overlooked: First, in the presence of unavoidable structural asymmetries the anisotropic electron-hole exchange interaction induces a ne structure splitting (FSS; s) between the intermediate exciton X levels21 that markedly lowers the degree of entanglement of the source22, which eventually emits only classically polarization-correlated photons. Even though methods to suppress the FSS exist6,23, advanced quantum optics experiments24 are still carried out using single hero QDs that havefor probabilistic reasons25zero FSS. Second, even having at hand a bunch of these special QDs, each of them emits entangled photons at a different random energy, and any attempt to modify these energies via external perturbations restores the FSS, thus spoiling entanglement10. This represents a serious hurdle when one aims at using several QDs for quantum communication. In fact, the tunability in energy of the entangled photons is a fundamental prerequisite to teleport entanglement between the distant nodes of a quantum network via quantum interference26 and, to date, has been demonstrated only for Poissonian sources of entangled photons27,28. Control over the photon energy is also an essential requirement for efcient photon storage in quantum memories based on atomic clouds29 or BoseEinstein condensates30, as the existing protocols require precise colour matching with atomic resonances.

Here we demonstrate that it is possible to control the energy of the entangled photons emitted by arbitrarily selected QDs without degrading the degree of entanglement of the quantum source. The core idea of our work is to manipulate the strain state of the QD and surrounding semiconductor matrix so as to achieve full control over the anisotropic electron-hole exchange interaction21, and to modify the energy levels involved in the generation of entangled photons (X and XX) without opening the FSS. Addressing this task is not trivial. Theory6,23 and experiments6 have demonstrated that the X level degeneracy of any arbitrary QD can be restored via the combined action of two independent external perturbations, such as stress and electric elds. Suppression of the FSS occurs, however, for a particular combination of the magnitude of the two elds and, as a consequence, for a rather small and unpredictable spectral range of the emitted photons10. Although for QDs with special properties energy tuning at small (albeit non zero) FSS can be achieved using a combination of magnetic and electric elds31, the demonstration of a truly energy-tunable source of entangled photonswhose entanglement degree is not dependent on the

photon energyhas been till now lacking. Recently, some of us have theoretically shown that an energy-tunable source of entangled photons based on an arbitrary QD requires at least three independent tuning knobs32, thus explaining the unsuitability of previous approaches10,31. Such degrees of freedom are conveniently provided by the three components of the QD in-plane strain tensor. We now present the experimental implementation of this theoretical concept. To benchmark our results we precisely tune a QD (articial atom) to emit entangled photons in the spectral region between double absorption resonances of natural atoms, and we demonstrate slow-entangled photons.

ResultsMastering the exciton ne structure splitting. Our device (Fig. 1b,c) is built-up merging piezoelectric and semiconductor technologies33and it allows any arbitrary QD (Fig. 1a) to be tuned for the generation of polarization-entangled photons with tunable wavelength (Fig. 1d) in the spectral region of the D1 lines of a cloud of cesium atoms (Fig. 1e). The self-assembled In(Ga)As QDs studied here are embedded in the free-standing area of a 300-nm-thick GaAs nanomembrane that is bonded onto a micromachined 300-mm-thick [Pb(Mg1/3Nb2/3)O3]0.72-

[PbTiO3]0.28 (PMN-PT) piezoelectric substrate. The actuator features six trapezoidal areas (legs) separated by trenches aligned at B60 with respect to each other (for details about the device fabrication, see Supplementary Fig. 1 and Supplementary Note 1). The key idea behind this design is that full control of the in-plane strain tensor can be achieved by applying three independent uniaxial stresses in the nanomembrane plane. With our actuator, quasi-uniaxial stresses in the membrane can be obtained by applying three independent voltages (V1, V2 and V3) at the bottom of opposite legs (labelled as Leg 1,2,3) with respect to the top part of the piezo, which is electrically grounded. Figure 1c shows a top-view microscope picture of the central part of the device. The regions of the nanomembrane that are suspended can be clearly distinguished from those that are bonded on the piezo legs.

The rst question we address is: how to achieve full control over the FSS of any arbitrary QD? External elds with two different degrees of freedom are required to master two different QD parameters32: the magnitude of the FSS (s), and the polarization direction of the exciton emission (y). The latter parameter gives the in-plane orientation of the exciton dipoles with respect to the crystal axis34, and it provides information about the QD anisotropy that is fundamental to drive the device during the experiment. A robust approach6 to achieve zero FSS in any QD with two tuning knobs can be illustrated by picturing the QD anisotropy as an ellipse with axes given by the two in-plane spinspin coupling constants21 (Fig. 2a): the FSS can be suppressed every time one external eld is used to align y along the direction of application of the second eld (f, see the central panel of Fig. 2a), which is then capable to compensate completely for the asymmetries in the in-plane QD conning potential (see the right panel of Fig. 2a), that is, it is capable to tune the FSS through zero. Following this picture, the rst step we performed in the experiment is a polarization-resolved measurement aimed at quantifying s and y for a randomly chosen QD when no voltages are applied to the piezo legs. These two quantities are encoded in the polar plots of Fig. 2b, where the length and orientation of the petals give the value of the s and y, respectively (see Methods). The measurement at zero applied voltages (see the black data points in Fig. 2b) reveals s 200.3 meV and

y 1090.4 with respect to the [110] direction of the GaAs

nanomembrane, which was aligned perpendicularly to Leg 2

2 NATURE COMMUNICATIONS | 7:10375 | DOI: 10.1038/ncomms10375 | http://www.nature.com/naturecommunications

Web End =www.nature.com/naturecommunications

NATURE COMMUNICATIONS | DOI: 10.1038/ncomms10375 ARTICLE

XX H s

X V H V

General case (no entanglement)

Entangled-photon sources with wavelength on demand

Device for anisotropic strain engineering Interfacing artificial and natural atoms

Cesium cloud

Ground

GaAs

PMN-PT

50 m

Figure 1 | A six-legged semiconductor-piezoelectric device for quantum optics. (a) Sketch of the radiative decay of a conned biexciton (XX) to the ground state (0) in a generic as-grown QD. In the presence of a FSS (s), the emitted photons are only classically correlated. H (V) indicates horizontally (vertically) polarized photons. (b) Sketch of the six-legged device used to engineer the strain status of a nanomembrane (grey region) containing QDs. (c) Microscope picture of the central part of the nal device. (d) Same as in a for a QD embedded in the device show in c, where anisotropic in-plane strains are rst used to restore the exciton (X) degeneracy (left panel), and then to modify the X and XX energies without affecting the FSS (right panel). The yellow lines indicate entanglement. s (s ) indicates right (left) circularly polarized photons. (e) Sketch of a QD whose X photonpolarization entangled with the XX photonis tuned to the middle of the hyperne levels of cesium (Cs) and is slowed down.

Leg 2

Leg 1

Leg 3

Leg 1

s 0

s 0 s = 0

E (eV)

[110]

E (eV)

Leg 1

Leg 3

Leg 1

150

V 1 (V)

300

18 2 = 19

2 = 10

450

600

450 300 150 0

V3 (V)

s (eV)

1.382

1.380

E X (eV)

Sweeping voltage on leg 2

1.378

s = 0

1.376

1.382

1.381

1.378

1.376

1.374

300 150 0

V2 (V)

EX (eV)

Figure 2 | Tuning the exciton energy at zero ne structure splitting. (a) Sketches of the in-plane QD anisotropy under the effect of external perturbations, see the main text. (b) Dependence of DE (see Methods) as a function of the angle the linear polarization analyser forms with the[110] crystal axis. The length and orientation of the petals give the value of the s and y, respectively. The black data points correspond to zero applied voltages, while the red data points show the conguration in which Leg 1 is used to achieve yBf2. The solid lines are sinusoidal ts to the experimental data. (c) Same as in b when Leg 3 is used to change the QD strain status (see the blue data points) while Leg 1 is again used to achieve yBf2 (see the red data points). The curve for zero applied voltages is also reported for reference (see the black data points). (d) Linear dependence of V1 versus V3 when yB f2. (e) Behaviour of the FSS as a function of EX, modied as described in the text. The dashed line shows the threshold of 1 meV. (f) Behaviour of EX as a function of V2 at s 0.

during device fabrication. Since y differs from the direction of application of the stress exerted by Leg 2 (labelled f2 in the gure) by 19, it is not possible to suppress the FSS using only this leg. In fact, Fig. 2e shows clearly that sweeping the voltage across Leg 2 leads to an anticrossing between the two X states35, with a lower bound for the FSS of B10 meV. The X degeneracy can

instead be restored by rst using Leg 1 to align y along Leg 2 (see red data points in Fig. 2b), and then employing Leg 2 to cancel the FSS. Figure 2e shows that when yBf2 the FSS can be tuned well below the threshold of 1 meV usually required to observe entangled photon emission (see the black data points on the left-hand side). These results represent the rst experimental

NATURE COMMUNICATIONS | 7:10375 | DOI: 10.1038/ncomms10375 | http://www.nature.com/naturecommunications

Web End =www.nature.com/naturecommunications 3

ARTICLE NATURE COMMUNICATIONS | DOI: 10.1038/ncomms10375

evidence that the FSS can be fully controlled with two independent stresses, in line with earlier theoretical predictions23. We observe this behaviour in all eight QDs we selected randomly in two different devices, thus proving the general relevance of our ndings. It is important to note that, for each QD, there is only one combination of V1 and V2 that allow the condition s 0 to be reached, similarly to the case of strain

and electric eld10.

The second question is: how to control the X energy (Ex) of an arbitrary QD without re-opening the FSS? In other words: how to use any QD as energy-tunable source of entangled photons? As recently proposed, this can be achieved by adding an isotropic biaxial strain in the plane of the QD32,36, which does not affect its in-plane anisotropy (Fig. 2a). To accomplish this task we make use of the third pair of piezo legs: By applying a voltage V3 across it we modify the strain conguration and thus the initial values of s and y (see the blue data points in Fig. 2c). We then follow the two-step procedure described above to erase the FSS: (1) We use Leg 1 to rotate y until the exciton aligns along Leg 2 or the perpendicular direction, that is, until we reach the condition yBf2 (see the Supplementary Fig. 2 and the Supplementary Note2). The specic direction is determined by the handedness of y under the stress exerted by Leg 1, being clockwise (anticlockwise) when it is larger (smaller) than 120. (2) Finally, we suppress the FSS by sweeping again the voltage on Leg 2 (Fig. 2e). Having modied the QD strain status with Leg 3, the condition s 0 is

now obtained for a different combination of V1 and V2 and, as a consequence, for a different X energy (see the black data points on the right-hand side of Fig. 2e). It is worth mentioning that the role of the legs can be exchanged without affecting the nal results, as there exists only one combination of the three in-plane components of the stress tensor which leads to s 0 at each

specic X energy32. To change EX, it is then sufcient to repeat the three step procedure described for a different combination of V1, V2 and V3 (see the other black points on the right-hand side of Fig. 2e). This is made easier considering that the voltages V1 and V3 to be applied to maintain the condition yBf2 scale linearly (Fig. 2d). Finally, Fig. 2f shows that at s 0 EX changes

linearly with V2 and, most importantly, that it can be tuned across a spectral range of B7 meV. The experimental results shown so far are fully in line with a theoretical model based on k?p theory that describes the behaviour of the X states under the inuence of in-plane strains with variable magnitude and anisotropy32. This model further conrms that our six-legged device is capable of delivering three independent stresses to single QDs (Supplementary Fig. 2), the key ingredient to reach the results shown in this work.

Entangled photon sources with wavelength on demand. Having demonstrated for the rst time that it is possible to tune the energy of the X at s 0, we now demonstrate that our device can

be used as a truly energy-tunable source of entangled photons, that is, a source where the level of entanglement does not depend on the energy of the emitted photons. For this experiment, we choose a different QD and we repeat the procedure detailed above by carefully tuning the FSS down to zero with a resolution of B0.2 meV (Fig. 3a). For two different X energies (highlighted with EX1 and EX2 in Fig. 3a) we performed polarization-resolved cross-correlation measurements between the X and XX photons (see Methods). In the case s 0, the two-photon

state can be expressed by the maximally entangled Bell state c RXXLX

j i LXXRX

j i

Cesium

s (eV)

EX1

EX3

EX2

0 1.3856 1.3858 1.3860 1.3862

1.3864 1.3866 1.3868

EX (eV)

EX2

4 DD DA

EX1

DD DA

HH HV

g(2) ( )

4 RR RL

4 HH HV

0 20 10 0 10 20

Delay (ns)

20 10 0 10 20 Delay (ns)

0.8

Fidelity f

0.6

Classical limit

0.4

0.2

0.0

20 10 0 10 20 Delay (ns)

Figure 3 | Entangled photon pairs at different photon energies. (a) Same as in Fig. 2e for a different QD whose FSS is ne-tuned to so0.2 meV. The circles indicate the X energies (EX1,2,3) where cross-correlation

measurements have been performed. In particular, EX3 correspond to the position in between the hyperne lines of Cs. (b) XX-X cross-correlation measurements for diagonal (top panel), circular (central panel) and linear (bottom panel) polarization basis when the X energy is set to EX1. (c) Same as in b for EX2. (d) Fidelity as a function of the time delay when the X energy is set to EX1. The dashed line indicates the threshold for entanglement, that is, the classical limit. (e) Same as in d for EX2.

20 10 0 10 20 Delay (ns)

p , which can be equivalently rewritten as c HXXHX

j i VXXVX

j i

p or

p , where H (V), D (A) and R (L) indicate horizontally (vertically) polarized, diagonally

(antidiagonally) polarized, and right (left)-circularly polarized photons, respectively. Therefore, when performing polarization-resolved cross-correlation measurements, one expects a strong bunching peak for co-linear, co-diagonal, and cross-circular polarization and antibunching for the opposite polarization settings. This is exactly the behaviour we observe in our measurements (Fig. 3b and 3c), which represent a clear signature of entanglement. To estimate the degree of entanglement, we calculated the delity f to the Bell state c (see Methods) and we foundby integrating over 0.5 ns around the central peak f1 0.800.05 and f2 0.780.06 for EX1 and EX2, respectively

(Fig. 3d,e), similarly to what we measured in different QDs by full reconstruction of the two-photon density matrix10. These values are larger than the classical limit (0.5) for a source emitting polarization-correlated photons, and prove for the rst time that QDs can produce entangled states of light at different energies. The fact that the two values of the delity are identical within the error bounds demonstrates that the degree of entanglement of the source does not depend on the photon energy, an important requirement for applications37. Despite the delity we measure is among the highest ever reported so far for QDs9,10, it is not yet

c DXXDX

j i AXXAX

j i

4 NATURE COMMUNICATIONS | 7:10375 | DOI: 10.1038/ncomms10375 | http://www.nature.com/naturecommunications

Web End =www.nature.com/naturecommunications

NATURE COMMUNICATIONS | DOI: 10.1038/ncomms10375 ARTICLE

perfect (B1) due to depolarization of X states38 and recapture processes7. However, we strongly believe that the level of entanglement can be even improved further using faster photon detectors and resonant two-photon excitation schemes12,16.

Slowing-down entangled photons from QDs. To prove that we are able to control the energy of the entangled photons with the precision required for advanced quantum optics experiments, we show that it is possible to interface entangled photons emitted by a QD with clouds of natural atoms operated as a slow-light medium. Pioneering works on the eld39,40 have demonstrated that single photons emitted by GaAs QDs can be slowed down using warm rubidium vapours, which can be also exploited as absolute energy reference to interconnect the different nodes of a quantum network. The concept has been recently adopted to interface single photons emitted by single molecules with vapours of alkali atoms41. However, it has never been applied to slow down entangled photon pairs from single quantum dots. The reason is that the energy of one photon of the entangled pair must match the spectral window of double absorption resonances in warm atomic vapours, and this possibility was out of reach before our work.

The emission spectrum of our QDs is centred at B900 nm, close to the D1 lines of cesium (Cs). Therefore, we insert a temperature-stabilized quartz cell containing Cs vapour42,43 in the optical path of the exciton photon (see Methods). Figure 4a shows a sketch of the Cs D1 lines of relevance for this experiment, that is, the transitions involving the 62P1/2 level and the hyperne-split 62S1/2 doublet44. To observe slow-entangled photons, one has to tune the energy of the X (or XX) transition in between the hyperne lines39 while s is kept at 0 (see purple arrows in Fig. 4a). Experimentally, this condition is identied by recording the intensity of the X emission while scanning its energy across the Cs lines (Fig. 4b). This allows us to observe two absorption resonances resulting from a convolution between the inhomogeneously broadened X transition and the Doppler-broadened Cs doublet (Supplementary Note 3). When the X energy is tuned exactly in the middle of the hyperne lines (EX3, Figs 3a and 4b), the QD photons probe a strongly dispersive medium and are slowed down39. Taking into account the temperature of the Cs cell used in the experiment (TCs 140 C), we estimate a differential delay of up to B2 ns

on a 7.5 cm long path. To observe this delay, it is sufcient to perform X-XX cross-correlation measurements with and without the Cs cell. Figure 4c shows the result of such measurements when both X and XX photons are collected with the same diagonal polarization. The bunching peak clearly shifts by 41.8 ns when the Cs cell is inserted into the optical path.

However, the peak appears less pronounced and broader compared with the measurements performed without Cs cell, which we attribute to dispersion combined with the spectral broadening of the X emission line (B35 meV, see Fig. 4b,

Supplementary Note 3 and ref. 43). It is therefore interesting to investigate whether the degree of entanglement of photon pairs is affected by the presence of the atomic cloud. Figure 4d shows the delity calculated after performing XX-X cross-correlation measurements with the same polarization settings used in Fig. 3b and 3c. The measurements without Cs cell show a peak delity of f3off 0.80.02, which nicely matches the values

obtained for the other EX1 and EX2 energies (Fig. 3) and further conrms that the degree of entanglement of our source does not change with the X energy. The measurements with the Cs cell show instead a peak delity of f3on 0.650.08. Despite this value

is above the classical limit of 0.5, it may suggest a degradation of the degree of entanglement. However, careful inspection of the

data shows that this is not the case and that the peak delity is not the most accurate parameter to estimate entanglement. The solid lines in Fig. 4d show lorentzian ts to the experimental data. In the presence of the Cs cloud there is a considerable temporal broadening (a factor almost 2), while the integrated area (A) remains practically unchanged (Aoff/Aon 1.06). These results

clearly imply that the degree of entanglement of the photons is not affected by the presence of the Cs cell, thus opening new venues for advanced quantum optics experiments with the hybrid articialnatural atomic interface.

DiscussionIn conclusion, we have demonstrated that it is possible to modify the energy of the polarization-entangled photons emitted by arbitrary QDs without affecting the degree of entanglement of the photons. These results have been achieved by developing a novel class of electrically controlled semiconductor-piezoelectric devices that allow the optical and electronic properties of every single QD to be arbitrarily re-shaped via anisotropic strain engineering. The tunability of the photon energy has opened up the unprecedented possibility to interface entangled photons from QDs with clouds of natural atoms and, in turn, to demonstrate for the rst time slow-entangled photons from a single QD. In light of our results, it is possible to envisage a new era for QDs in the eld of large distance quantum communication. In fact, dissimilar QDs can now be used for entanglement teleportation (or swapping), as the entangled photons can be colour matched for quantum interference at a beam splitter26. Furthermore, the hybrid articial-atomic interface we have built-up can be further developed up to the limit where entangled states are stored and

a b

Natural atom

62P1/2

62S1/2

Articial atom

FWHMQD= 35 eV

EX3

I X (a.u.)

1.38588 1.38592 1.38596

EX(eV)

c d

DD - off Cs DD - on Cs

0.8

Aoff/Aon=1.06

woff/won=0.64

0.6

g(2) ( )

Fidelity f

0.4

0.2

= 1.8 ns

0 10 0 10Delay (ns)

Figure 4 | Entangled photons from articial atoms interfaced with natural atoms. (a) Sketch of the energy levels of a Cs atom (left panel) and of a QD ne-tuned for entanglement (right panel). The energy axis (not to scale) has been shifted so that EX (purple arrow) matches the middle of the two D1 lines of Cs (black arrows). (b) Intensity of the X when its energy is swept across the D1 lines of Cs. The solid line is a t to the theoretical model (see Supplementary Note 3) used to extract the linewidth of the

X transition (indicated with FWHMQD). The dashed arrow indicates the EX3. (c) XX-X cross-correlation measurements with the same diagonal polarization with (blue line) and without (red line) the Cs cell in the X optical path. The temporal delay introduced by the Cs cell (t) is also indicated. (d) Fidelity with (blue data points) and without (red data points)

the Cs cell in the X optical path. The solid lines are Lorentzian ts to the data. The ratio between the full-width-half maxima (FWHM; w) of the curves and the integrated area (A) are also indicated.

NATURE COMMUNICATIONS | 7:10375 | DOI: 10.1038/ncomms10375 | http://www.nature.com/naturecommunications

Web End =www.nature.com/naturecommunications 5

ARTICLE NATURE COMMUNICATIONS | DOI: 10.1038/ncomms10375

retrieved at the single-photon level29. This could allow the whole concept of a quantum repeater45 to be implemented. Addressing these applications most likely requires the use of our energy-tunable entangled-photon source in combination with broadband photonic structures featuring GaAs microlenses that are capable to boost the ux of QD photons46,47 and with resonant excitation schemes for the deterministic generation of entangled photons with high degree of indistinguishability12,16. However, the implementation of the perfect source of entangled photons is worth the efforts, as the realization of a solid state-based quantum network for the distribution of quantum entanglement among distant parties48 will be revolutionary.

Methods

Sample growth and device fabrication. In(Ga)As QDs were grown by molecular beam epitaxy. Following oxide desorption and buffer growth, a 100-nm-thick Al0.75Ga0.25As sacricial layer was deposited before a 300-nm-thick GaAs layer containing the QDs. The QDs were grown at 500 C and capped by an indium ush technique. Using standard epoxy-based photoresist, the sample (coated with a 100-nm-thick Cr/Au layer) was integrated via a ip-chip process onto a Cr/Au-coated micro-machined PMN-PT actuator. The GaAs substrate, buffer layer and AlGaAs sacricial layer were removed using wet chemical etching (Supplementary Fig. 1), thus leaving the GaAs nanomembrane tightly bound on the piezoelectric actuator. The PMN-PT actuator was processed in the six-leg design shown in Fig. 1 with a femtosecond laser having central wavelength of 520 nm, pulse duration of 350 fs, repetition rate of 25 kHz and a B5 mm spot size. Six metal contacts were fabricated at the bottom of the piezo legs so that independent voltages can be applied with respect to the top contact, which is set to ground. The same voltage is applied to opposite legs to limit displacements of the central structure. The voltage applied on each pair of legs leads to a well-controlled deformation of the GaAs nanomembrane suspended in the central part (Supplementary Note 4 and Supplementary Fig. 3). The piezoelectric actuator was poled so that a voltage Vo0 (V40) applied to each pairs of aligned legs result in an out-of-plane electric eld that leads to an in-plane contraction (expansion) of the piezo leg. Therefore,an in-plane tensile (compressive) strain is transferred to the central part of the nanomembrane (Supplementary material). In the tensile regime (Vo0), the X emission line of the QD of Fig. 2 shifts approximately linearly with the applied voltages, with a slope that depends on the used leg. In particular, we measure slopes of 10, 7, 3 meV/V for Legs 1, 2 and 3, respectively. This difference may arise from the fact that the QD under investigation is not sitting in the very central part of the device (Supplementary Note 4).

Micro-photoluminescence and photon-correlation spectroscopy. Conventional micro-photoluminescence spectroscopy is used for the optical characterizationof the devices. The measurements are performed at low temperatures (typically 410 K) in a helium ow cryostat. The QDs are excited non-resonantly at 840 nm with a femtosecond Ti:Sapphire laser and focused by a microscope objective with0.42 numerical aperture. The measurements in Figs 3 and 4 appear to be performed with a continuous wave laser due to long lifetime of the X transition. The same objective is used for the collection of the photoluminescence signal, which is spectrally analysed by a spectrometer and detected by a nitrogen-cooled silicon charge-coupled device. Polarization-resolved micro-photoluminescence experiments are performed combining a rotating half-wave plate and a xed linear polarizer placed after the microscope objective. The transmission axis of the polarizer is set parallel to the [110] direction of the GaAs crystal (within 2) and perpendicular to the entrance slit of the spectrometer, which denes the laboratory reference for vertical polarization. The FSS and the polarization angle of the X emission are evaluated using the same procedure reported in ref. 10, which ensures sub-microelectronvolt resolution. In particular, Fig. 2 shows DE as a function of the angle the linear polarization analyser forms with the [110] crystal axis, where DE is half of the difference between the XX and X energy minus its minimum value.

For photon-correlation measurements, the signal is split into two parts after the microscope objective using a non-polarizing 50/50 beam splitter, spectrally ltered with two independent spectrometers tuned to the XX and X energies, and nally sent to two Hanbury Brown and Twiss setups. Each Hanbury Brown and Twiss setups consists of a polarizing 50/50 beam splitter placed in front of two avalanche photodiodes (APDs), whose output is connected to a four-channel correlation electronics for reconstructing the second-order cross-correlation function between the XX and X photons, g(2)(t). The temporal resolution of the set-up is B500 ps, mainly limited by the time jitter of the APDs. Properly oriented half-wave plates and quarter-wave plates are placed right after the non-polarizing beamsplitterto select the desired polarization. With a single measurement, this experimental set-up allows g2XX;Xt to be reconstructed in four different polarization settings,

so as to minimize the effect of possible sample drifts. The count rate at each APD is typically 103104 count per seconds and the integration time used for each measurement is B1 h.

For cross-correlation measurements in the presence of the atomic cloud we use a 7.5-cm-long quartz cell lled with Cs vapours and wounded up with heating foils for precise temperature tuning. The temperature chosen for the experiment is 1400.1 C. The Cs cell is inserted in the X optical path, after the non-polarizing beam splitter and the retarder wave plates, right before the entrance slit of the spectrometer. When the X is tuned in between the hyperne lines of Cs, the count rate at the APDs is reduced by a factor of B2 due to the optical absorption in the

Cs vapour.

Entanglement analysis. Raw data were used to evaluate the second-order correlation functions, without any background light subtraction. As mentioned in the previous section, the experimental set-up allows the second order XX-X cross-correlation function g2ABt to be evaluated in four different polarization

settings (AB) with a single measurement, that is, g2ABt, g2BAt, g2AAt, g2BBt are

measured simultaneously. Having four measurements for each polarization basis has two main advantages: it compensates for measurement drifts and it allows us to calculate the degree of correlation without any assumption on the polarization state of the photons. In particular, we do not need to assume, for example, that g2AAt g2BBt, and we can simply average the observed results, that is,

g 2AA g2AA g2BB = 2. The degree of correlation is then calculated using the

following formula CAB g 2AA g 2AB = g 2AA g 2AB. Finally, the delity is

calculated via5 f 1 CHV

j j CDA

j j CRL

j j = 4.

References

1. Weitering, H. H. Quantum dots: one atom at a time. Nat. Nanotechnol. 9, 499500 (2014).

2. Michler, P. (ed.). in Single Quantum Dots (Springer, 2009).3. Benson, O., Santori, C., Pelton, M. & Yamamoto, Y. Regulated and entangled photons from a single quantum dot. Phys. Rev. Lett. 84, 25132516 (2000).

4. Akopian, N. et al. Entangled photon pairs from semiconductor quantum dots. Phys. Rev. Lett. 96, 130501130505 (2006).

5. Young, R. J. et al. Improved delity of triggered entangled photons from single quantum dots. New J. Phys. 8, 29 (2006).

6. Trotta, R. et al. Universal recovery of the energy-level degeneracy of bright excitons in InGaAs quantum dots without a structure symmetry. Phys. Rev. Lett. 109, 147401147405 (2012).

7. Dousse, A. et al. Ultrabright source of entangled photon pairs. Nature 466, 217220 (2010).

8. Huber, T. et al. Polarization entangled photons from quantum dots embedded in nanowires. Nano. Lett. 14, 71077114 (2014).

9. Versteegh, M. A. M. et al. Observation of strongly entangled photon pairs from a nanowire quantum dot. Nat. Commun. 5, 5298 (2014).

10. Trotta, R., Wildmann, J. S., Zallo, E., Schmidt, O. G. & Rastelli, A. Highly entangled photons from hybrid piezoelectric-semiconductor quantum dot devices. Nano Lett. 14, 34393444 (2014).

11. Kuroda, T. et al. Symmetric quantum dots as efcient sources of highly entangled photons: Violation of Bells inequality without spectral and temporal ltering. Phys. Rev. B 88, 041306 R (2013).

12. Mller, M., Bounouar, S., Jns, K. D., Glassl, M. & Michler, P. On-demand generation of indistinguishable polarization-entangled photon pairs. Nat. Photon. 8, 224228 (2014).

13. Stevenson, R. M. et al. Indistinguishable entangled photons generated by a light-emitting diode. Phys. Rev. Lett. 108, 040503 (2012).

14. Kwiat, P. G. et al. New high-intensity source of polarization entangled photon pairs. Phys. Rev. Lett. 75, 4337 (1995).

15. Fulconis, J., Alibart, O., OBrien, J. L., Wadsworth, W. J. & Rarity, J. G. Nonclassical interference and entanglement generation using a photonic crystal ber pair photon source. Phys. Rev. Lett. 99, 120501 (2007).

16. Jayakumar, H. et al. Deterministic photon pairs and coherent optical control of a single quantum dot. Phys. Rev. Lett. 110, 135505 (2013).

17. Aspect, A., Grangier, P. & Roger, G. Experimental tests of realistic local theories via Bells theorem. Phys. Rev. Lett. 47, 460463 (1981).

18. Salter, C. L. et al. An entangled-light-emitting diode. Nature 465, 594597 (2010).

19. Juska, G., Dimastrodonato, V., Mereni, L. O., Gocalinska, A. & Pelucchi, E. Towards quantum-dot arrays of entangled photon emitters. Nat. Photon. 7, 527 (2013).

20. Lu, C.-Y. & Pan, J.-W. Quantum optics: push-button photon entanglement. Nat. Photon. 8, 174176 (2014).

21. Bayer, M. et al. Electron and hole g factors and exchange interaction from studies of the exciton ne structure in In0.60Ga0.40As quantum dots. Phys. Rev. Lett. 82, 17481751 (1999).

22. Santori, C., Fattal, D., Pelton, M., Solomon, G. S. & Yamamoto, Y. Polarization-correlated photon pairs from a single quantum dot. Phys. Rev. B 66, 045308 (2002).

6 NATURE COMMUNICATIONS | 7:10375 | DOI: 10.1038/ncomms10375 | http://www.nature.com/naturecommunications

Web End =www.nature.com/naturecommunications

NATURE COMMUNICATIONS | DOI: 10.1038/ncomms10375 ARTICLE

23. Wang, J., Gong, M., Guo, G.-C. & He, L. Eliminating the ne structure splitting of excitons in self-assembled InAs/GaAs quantum dots via combined stresses. Appl. Phys. Lett. 101, 063114 (2012).

24. Nilsson, J. et al. Quantum teleportation using a light-emitting diode. Nat. Photon. 7, 311315 (2013).

25. Gong, M. et al. Statistical properties of exciton ne structure splittingand polarization angles in quantum dot ensembles. Phys. Rev. B 89, 205312 (2014).

26. Pan, J.-W., Bouwmeester, D., Weinfurter, H. & Zeilinger, A. Experimental entanglement swapping: entangling photons that never interacted. Phys. Rev. Lett. 80, 38913894 (1998).

27. Predojevi, A., Grabher, S. & Weihs, G. Pulsed Sagnac source of polarization entangled photon pairs. Opt. Express 20, 2502225029 (2012).

28. Fedrizzi, A., Herbst, T., Poppe, A., Jennewein, T. & Zeilinger, A. A wavelength-tunable ber-coupled source of narrowband entangled photons. Opt. Express 15, 15377 (2007).

29. Choi, K. S., Deng, H., Laurat, J. & Kimble, H. J. Mapping photonic entanglement into and out of a quantum memory. Nature 452, 6771 (2008).

30. Lettner, M. et al. Remote entanglement between a single atom and a Bose-Einstein condensate. Phys. Rev. Lett. 106, 210503 (2011).

31. Pooley, M. A. et al. Energy-tunable quantum dot with minimal ne structure created by using aimultaneous electric and magnetic elds. Phys. Rev. Applied 1, 024002 (2014).

32. Trotta, R., Martn-Snchez, J., Daruka, I., Ortix, C. & Rastelli, A. Energy-tunable sources of entangled photons: a viable concept for solid-state-based quantum relays. Phys. Rev. Lett. 114, 150502 (2015).

33. Trotta, R. et al. Nanomembrane quantum-light-emitting diodes integrated onto piezoelectric actuators. Adv. Mater. 24, 2668 (2012).

34. Gong, M., Zhang, W., Guo, G.-C. & He, L. Exciton polarization, ne-structure splitting, and the asymmetry of quantum dots under uniaxial stress. Phys. Rev. Lett. 106, 227401 (2011).

35. Bennett, A. J. et al. Electric-eld-induced coherent coupling of the exciton states in a single quantum dot. Nat. Phys. 6, 947950 (2010).

36. Wang, J., Gong, M., Guo, G.-C. & He, L. Towards scalable entangled photon sources with self-assembled InAs/GaAs quantum dots. Phys. Rev. Lett. 115, 067401 (2015).

37. Ekert, A. K. Quantum cryptography based on Bells theorem. Phys. Rev. Lett. 67, 661663 (1991).

38. Stevenson, R. M. et al. Coherent entangled light generated by quantum dots in the presence of nuclear magnetic elds. Preprint at http://arxiv.org/abs/1103.2969

Web End =http://arxiv.org/abs/ http://arxiv.org/abs/1103.2969

Web End =1103.2969 (2011).

39. Akopian, N., Wang, L., Rastelli, A., Schmidt, O. G. & Zwiller, V. Hybrid semiconductor-atomic interface: slowing down single photons from a quantum dot. Nat. Photon. 5, 230233 (2011).

40. Akopian, N. et al. An articial atom locked to natural atoms. Preprint at http://arxiv.org/abs/1302.2005

Web End =http:// http://arxiv.org/abs/1302.2005

Web End =arxiv.org/abs/1302.2005 (2013).

41. Siyushev, P., Stein, G., Wrachtrup, J. & Gerhardt, I. Molecular photons interfaced with alkali atoms. Nature 509, 6670 (2014).

42. Ulrich, S. M. et al. Spectroscopy of the D1 transition of cesium by dressed-state resonance uorescence from a single (In,Ga)As/GaAs quantum dot. Phys. Rev. B 90, 125310 (2014).

43. Wildmann, J. S. et al. Atomic clouds as spectrally-selective and tunable delay lines for single photons from quantum dots. Phys. Rev. B 92, 235306 (2015).

44. Steck, D. A. Cesium D Line Data. Available at http://steck.us/alkalidata

Web End =http://steck.us/alkalidata (revision 2.1.4, 23 December 2010).

45. Duan, L.-M., Lukin, M. D., Cirac, J. I. & Zoller, P. Long-distance quantum communication with atomic ensembles and linear optics. Nature 414, 413 (2001).

46. Gschrey, M. et al. Highly indistinguishable photons from deterministic quantum-dot microlenses utilizing three-dimensional in situ electron-beam lithography. Nat. Commun. 6, 7662 (2015).

47. Ma, Y., Ballesteros, G., Zajac, J. M., Sun, J. & Gerardot, B. D. Highly directional emission from a quantum emitter embedded in a hemispherical cavity. Opt. Lett. 40, 23732376 (2015).

48. Kimble, H. J. The quantum internet. Nature 453, 10231030 (2008).

Acknowledgements

We thank G. Katsaros, G. Bauer, A. Predojecvic, C. Ortix and F. Schafer for fruitful discussions and T. Lettner and D. Huber for help. We acknowledge O.G. Schmidt for support in the sample growth. The work was supported nancially by the European Union Seventh Framework Programme 209 (FP7/2007-2013) under Grant Agreement No. 601126 210 (HANAS), and the AWS Austria Wirtschaftsservice, PRIZE Programme, under Grant No. P1308457.

Author contributions

R.T. conceived the experiment. R.T., with help from J.M.-S., J.S.W., M.R. and A.R., performed measurements and data analysis. J.M.-S., with help from C.S., R.T. and A.R., designed the actuator and processed the device. G.P., S.S. and J.E. processed the piezoelectric actuators. E.Z. performed MBE growth. R.T. wrote the manuscript with help from all the authors. R.T. and A.R. coordinated the project.

Additional information

Supplementary Information accompanies this paper at http://www.nature.com/naturecommunications

Web End =http://www.nature.com/ http://www.nature.com/naturecommunications

Web End =naturecommunications

Competing nancial interests: The authors declare no competing nancial interests.

Reprints and permission information is available online at http://npg.nature.com/reprintsandpermissions

Web End =http://npg.nature.com/ http://npg.nature.com/reprintsandpermissions

Web End =reprintsandpermissions /

How to cite this article: Trotta, R. et al. Wavelength-tunable sources of entangled photons interfaced with atomic vapours. Nat. Commun. 7:10375doi: 10.1038/ncomms10375 (2016).

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the articles Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Web End =http://creativecommons.org/licenses/by/4.0/

NATURE COMMUNICATIONS | 7:10375 | DOI: 10.1038/ncomms10375 | http://www.nature.com/naturecommunications

Web End =www.nature.com/naturecommunications 7

Word count: 7046

Show less

Abstract

Translate

Details

Title

Wavelength-tunable sources of entangled photons interfaced with atomic vapours

Author

Trotta, Rinaldo; Martín-sánchez, Javier; Wildmann, Johannes S; Piredda, Giovanni; Reindl, Marcus; Schimpf, Christian; Zallo, Eugenio; Stroj, Sandra; Edlinger, Johannes; Rastelli, Armando

Pages

10375

Publication year

2016

Publication date

Jan 2016

Publisher

Nature Publishing Group

e-ISSN

20411723

Source type

Scholarly Journal

Language of publication

English

DOI

https://doi.org/10.1038/ncomms10375

ProQuest document ID

1760274407

Wavelength-tunable sources of entangled photons interfaced with atomic vapours

Jump to:

Full text

Abstract

Details

Suggested sources