It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Arduino Data Acquisition (ADAQ) is a popular development device among hobbyists nowadays because of its cheap price. Arduino comes in many forms, and recently, Arduino has been used in many industries for many applications, including vibration monitoring. This study aimed to investigate feasibility of using an Arduino data acquisition to detect anomalies in the operation of a water pump. An Arduino Mega was used with an ADXL345 accelerometer attached to a water pump motor to measure vibration continuously. Vibration was measured with a sampling rate of 530 Hz. Water pump vibration data abnormal conditions were measured and analysed to determine the problem. Results showed that vibration during anomalies was significantly greater than that in normal conditions. This study concludes that Arduino Data Acquisition with ADXL345 can detect abnormal water pump running conditions.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Sound and Vibration Research Group, Faculty of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia , 43400, Serdang, Selangor , Malaysia
2 Mechanical Research Laboratory, Centre of Excellence for Engineering and Technology (CREaTE), Public Works Department Malaysia , Alor Gajah, Melaka 78000 , Malaysia