Osteology of the first skull of Aetosauroides scagliai Casamiquela 1960 (Archosauria: Aetosauria) from the Upper Triassic of southern Brazil (Hyperodapedon Assemblage Zone) and its phylogenetic importance

Abstract

Aetosauria, which includes 30 species, is a diverse group of armored pseudosuchian archosaurs restricted to Upper Triassic beds. Three species occur in Brazil, and one of these, Aetosauroides scagliai Casamiquela, 1960, also occurs in Argentina. The specimen UFSM 11505, found at Faixa Nova–Cerrito I Outcrop, Santa Maria Formation (Hyperodapedon Assemblage Zone), Santa Maria, Rio Grande do Sul State, Brazil, is here referred to as Aetosauroides scagliai. This specimen preserves most of the skull with both hemimandibles in association with most of the postcranium, thus representing one of the most complete aetosaur skeletons found in Brazil. The premaxilla, one of the key elements of the cranial morphology of aetosaurs, along with the posterior portion of the mandible, was not described until now for A. scagliai. In contrast to the typothoracinae aetosaurs, the premaxilla of UFSM 11505 presents a shovel-shaped tip, but it is not as prominent as the lateral expansion of desmatosuchian aetosaurs, including both species of Stagonolepis, S. robertsoni Agassiz, 1844 and S. olenkae Sulej, 2010. The retroarticular process of the mandible is elongate and not tall, as in Stenomity huangae Small & Martz, 2013 and other typothoracinae aetosaurs. Unlike previous descriptions of A. scagliai, the maxillary teeth are recurved ziphodont-like with serrations on the entire length of both margins. Premaxillary teeth are also present, being less recurved than the maxillary teeth and cylindrical. We recovered Aetosauroides scagliai as the most basal taxon within Aetosauria, like previous phylogenetic analyses. Furthermore, our analyses reinforce that recurved and unconstricted maxillary teeth, the shovel-shaped premaxilla and the presence of a tuber on the surangular are plesiomorphic features of Aetosauria.

About the Authors:

Ana Carolina Biacchi Brust

Roles Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Writing – original draft, Writing – review & editing

* E-mail: [email protected]

Affiliation: Programa de Pós-Graduação em Geociências, Instituto de Geociências, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Brazil

ORCID logo http://orcid.org/0000-0001-7762-1284

Julia Brenda Desojo

Roles Data curation, Investigation, Methodology, Writing – original draft, Writing – review & editing

Affiliation: División Paleontología Vertebrados, Museo de La Plata, Facultad de Ciencias Naturales y Museo, La Plata, Buenos Aires, Argentina

Cesar Leandro Schultz

Roles Data curation, Investigation, Methodology, Writing – original draft, Writing – review & editing

Affiliation: Departamento de Paleontologia e Estratigrafia, Instituto de Geociências, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Brazil

Voltaire Dutra Paes-Neto

Roles Data curation, Investigation, Methodology, Writing – original draft, Writing – review & editing

Affiliation: Programa de Pós-Graduação em Geociências, Instituto de Geociências, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Brazil

Átila Augusto Stock Da-Rosa

Roles Data curation, Investigation, Methodology, Writing – original draft, Writing – review & editing

Affiliation: Departamento de Geociências, Centro de Ciências Naturais e Exatas, Universidade Federal de Santa Maria, Santa Maria, RS, Brazil

Introduction

Aetosauria is a group of quadrupedal pseudosuchian archosaurs, covered by dorsal, ventral, and appendicular osteoderms, and restricted to the Upper Triassic [1]. The first reported materials were osteoderms found in the upper layers of the Old Red Sandstone, Scotland, and mistakenly described as glenoid scales of Stagonolepis robertsoni, at the time considered a sarcopterygian fish [2]. Huxley [3] reconsidered S. robertsoni to be a crocodilian reptile. However, aetosaurs were only recognized in 1877, when Oscar Friedrich von Fraas described Aetosaurus ferratus based on a block containing 24 articulated skeletons, found at the village of Kaltental, Germany [4]. Later, Nicholson & Lydekker [5] defined “Aetosauria” to include A. ferratus [4] and Typothorax coccinarum [6], from the Chinle Formation, New Mexico, USA. S. robertsoni, in turn, would first be recognized as an aetosaur in 1961 [7]. In subsequent years, more specimens were found worldwide and assigned to this group, including 30 species today. The diagnostic osteoderm morphology of aetosaurs allowed other authors to diagnose several taxa, and propose a biostratigraphic application as an index for Upper Triassic continental strata [1, 8–14]. However, there are similar patterns of ornamentation expressed and shared in several species, such as Aetosauroides scagliai [15], Neoaetosauroides engaeus [16], Coahomasuchus kahleorum [17] and Stenomyti huangae [18], as discussed by some authors the last ten years [1, 19, 20]. Therefore, isolated osteoderms would not be sufficient to distinguish species.

In South America, five species are known: A. scagliai; N. engaeus; Chilenosuchus forttae [21]; Aetobarbakinoides brasiliensis [22]; and Polesinesuchus aurelioi [23]. Three of these occur in Brazil, A. brasiliensis, P. aurelioi and A. scagliai, the latter being the only one also recorded in Argentina [24]. Most of them are represented by osteoderms and postcranial material, whereas N. engaeus is the only South American aetosaur known from several skulls [25–27].

Casamiquela first described A. scagliai in 1960 [15] and shortly afterwards improved upon its description based on other specimens, PVL 2073, PVL 2059, PVL 2014 and PVL 2052, all of them from the Ischigualasto Formation, Argentina, and constitute most of the axial and appendicular skeleton as well as articulated osteoderms [15, 28, 29].

The taxonomic history of A. scalgiai in Brazil is complex. In 1982, Zacarias [30] informally described a new Aetosauroides species, “A. subsulcatus” in her unpublished master’s thesis, based on material from the Santa Maria Formation, Brazil. Three years later, Barberena et al. [31] changed its name to “A. inhamandensis” with no written justification. Later, Heckert & Lucas [11] synonymized A. scagliai with Stagonolepis robertsoni [2], based mostly on post-cranial character states. Both “A. subsulcatus” and “A. inhamandensis” in subsequent studies were considered nomina nuda and then synonymized with A. scagliai, along with the description of apomorphies, which distinguished A. scagliai from S. robertsoni [24].

Although known by fairly complete material, most of the skull of A. scagliai is still unknown, including the premaxilla and its teeth. As A. scagliai is recovered as the most basal and sister-taxon of all other members of Aetosauria [22, 32, 33], it is important to identify and clarify yet unknown cranial character states. In this contribution, we describe new skull material of Aetosauroides scagliai from the Santa Maria Supersequence, Brazil, and for the first time includes the anterior portion of the rostrum, which allows a more complete reconstruction of its skull.

SYSTEMATIC PALEONTOLOGY

ARCHOSAURIA Cope, 1869 [34] sensu Gauthier & Padian, 1985 [35]

PSEUDOSUCHIA Zittel, 1887–1890 [36] sensu Gauthier, 1985 [35]

AETOSAURIA Marsh, 1884 [37] sensu Parker, 2007 [19]

AETOSAUROIDES SCAGLIAI Casamiquela, 1960 [15]

= “Aetosauroides subsulcatus” Zacarias, 1982 [30]

= “Aetosauroides inhamandensis” Barberena et al., 1985 [31]

= Argentinosuchus bonapartei Desojo, 2005 [38]; Ezcurra, 2016 [39]

Type species: Aetosauroides scagliai Casamiquela, 1960 [15]

Diagnosis: As for type species.

Holotype: PVL 2073, incomplete and articulated postcranial skeleton: one anterior cervical centrum (2073–40), 13 dorsal, two sacral, and seven caudal vertebrae (2073–11), eight incomplete ribs, including two proximal ends articulated to their corresponding anterior dorsal vertebrae, almost complete right scapula (2073–14), articulated proximal portion of left scapula, coracoid, interclavicle, and clavicle (2073–15), incomplete right humerus (2073–6), complete left humerus (2073–3), ulna (2073–5), radius (2073–4), a pair of metacarpals (2073–33/34), articulated and complete ilia (2073–11), pubes lacking their distal ends (2073–17/18), almost complete and articulated ischia (2073–16), complete right femur (2073–2), fibula, astragalus, and distal tarsal (2073–31), complete left femur (2073–1), tibia lacking its distal end (2073–7), complete fibula (2073–8), probable proximal tarsal (2073–30), two metatarsals lacking their distal ends (2073–9/10), two isolated metatarsals (2073–19/20), pedal non-terminal phalanges (2073–35/37), an ungual (2073–32), paramedian and left lateral osteoderms of the cervical, dorsal, sacral, and caudal regions (2073–38), ventral osteoderms (2073–22), several appendicular osteoderms (2073–21/43), fragments of indeterminate osteoderms (2073–39/40), and some indeterminate fragments of bone (2073–53) [24].

Horizon and locality: Cancha de Bochas Member, Ischigualasto Formation, Argentina [40].

Stratigraphic range: Upper Triassic (Carnian) [41].

Revised diagnosis: Small to medium-sized aetosaur (1 to 2.42 meter in length) distinguished from other aetosaurs by the following apomorphies (autapomorphies with asterisk): maxilla excluded from the margin of the external naris*; ventral margin of dentary convex and without a sharp inflexion*; dorsal margin of the surangular with presence of a rounded tuber; recurved tooth crowns with denticles (ca. 8 per mm) on both mesial and distal margins without either wear facets or constriction between root and crown*; cervical and dorsal centra with oval fossae ventral to the neurocentral suture on the lateral sides of the centra; mid- and posterior dorsals with well-developed posterior infradiapophyseal lamina directly ventral to the diapophyses, and postzygapophyses posterolaterally divergent; ratio between the entire length of the postzygapophyses and the width between the posterior-most tips of the postzygapophyses equal or lower than 0.75*; anterior tip of premaxilla slightly expanded laterally (incipient shovel-shaped), contrasting with the well laterally expanded anterior tip of Stagonolepis and Desmatosuchus (see Discussion).

Referred material: (1) PVL 2052, a large-sized specimen with some skull elements preserved as natural casts, with much of the posterior portion of the postcranial skeleton well preserved, including the posterior dorsal vertebrae, pelvic girdle, fragments of the limb-bones and several articulated and isolated dorsal paramedian osteoderms including articulated tail armor [29]; (2) PVL 2059, small to medium-sized specimen with a partially preserved skull, with the anterior portion of the carapace preserved in articulation associated with correspondent region of the axial skeleton [15, 28]; (3) MCP-13, a small-sized specimen represented by six articulated dorsal vertebrae, partial articulated dorsal and ventral armor, several isolated lateral and ventral osteoderms, and fragments of vertebrae, ribs and osteoderms [43]; (4) UFSM 11070 (= MCP 3450 and UFRGS-PV-1302-T) a small to medium-sized specimen with most of the posterior portion of the postcranium [24, 44]; (5) UFSM 11505, skull with both hemimandibles, associated postcranium, including dorsal and caudal vertebrae, right pubis, an almost complete right hind-limb, and dorsal trunk paramedian osteoderms and ventral osteoderms (see below).

UFSM 11505 horizon and locality: massive red beds from the Santa Maria Formation, as part of the Candelária Sequence, Santa Maria Supersequence, Rio Grande do Sul, Brazil [45], found at the Faixa Nova–Cerrito I outcrop [46, 47] (Fig 1).

[Figure omitted. See PDF.]

Fig 1. Locality and horizon of UFSM 11505.

Map of the Brazilian region showing the Faixa Nova–Cerrito I Outcrop (arrow) in the Santa Maria Formation (modified from Desojo et al. [22]) and chronostratigraphic diagram for the Triassic of southern Brazil (modified from Da-Rosa [47]). Ages according to Cohen et al. [36], and sequence stratigraphy according to Horn et al. [45].

https://doi.org/10.1371/journal.pone.0201450.g001

Materials & methods

The material studied here is registered under the number UFSM 11505 and hosted at the fossil collection of the Laboratório de Estratigrafia e Paleobiologia of Universidade Federal de Santa Maria (UFSM), Santa Maria, Rio Grande do Sul State, Brazil. No permits were required for the described study according to Brazilian's Federative Constitution of 1988 and Law 11.738/02 of December 13th of 2001 of Rio Grande do Sul State, Brazil.

The specimen was found in 2009 by a team of researchers of the Universidade Federal de Santa Maria and Universidade Federal do Oeste do Paraná at Faixa Nova–Cerrito I Outcrop [44], at the meeting point between BR-287 and BR-158 roads, in the city of Santa Maria, Rio Grande do Sul State, Brazil (Figs 2–4). This outcrop is characterized by medium to fine-grained mudstones typical of the base of the Candelária Sequence (Upper Triassic, Carnian), one of the four third-order sequences of the Santa Maria Supersequence [45, 48, 49] (Fig 1). Several specimens of the rhynchosaur Hyperodapedon were also previously collected from this outcrop (UFRGS-PV-0408-T and UFRGS-1302-T, personally identified by VDPN and CLS), linking Faixa Nova–Cerrito I Outcrop to the Hyperodapedon Assemblage Zone [24, 50]. UFSM 11505 was divided in the field into several blocks to be moved and, unfortunately, the skull was broken in half and had to be reassembled.

[Figure omitted. See PDF.]

Fig 2. Skull of referred specimen of Aetosauroides scagliai (UFSM 11505), right lateral view.

Abbreviations: a, angular; aof, antorbital fenestra; d, dentary; en, external naris; f, frontal; l, lacrimal; ma, maxilla; maf, mandibular fenestra; n, nasal; of, orbital fenestra; p, parietal; pf, postfrontal; pm-pr, dorsal projection of premaxilla; pmx, premaxilla; prf, prefrontal; q, quadrate; sa, surangular; sa-pr, dorsal tuber of surangular; sp, splenial.

https://doi.org/10.1371/journal.pone.0201450.g002

[Figure omitted. See PDF.]

Fig 3. Skull of referred specimen of Aetosauroides scagliai (UFSM 11505), left lateral view.

Abbreviations: same as Fig 2.

https://doi.org/10.1371/journal.pone.0201450.g003

[Figure omitted. See PDF.]

Fig 4. Skull of referred specimen of Aetosauroides scagliai (UFSM 11505), dorsal view.

Abbreviations: same as Fig 2.

https://doi.org/10.1371/journal.pone.0201450.g004

UFSM 11505 consists of a skull with both hemimandibles (Figs 2–4) andassociated postcranial material. Here we concentrated on the cranial description because it preserves unknown elements for the species. Unfortunately, parts of postcranial material are yet unprepared and we used available postcranial information based on the description of [51] for the diagnosis and phylogenetic analysis only. All of the postcranial information will be used in a future study focusing on the biomechanics of the species.

Results

General remarks

The specimen is referred to Aetosauroides scagliai based on the following character states shared between UFSM 11505 and the holotype of A. scagliai: maxilla excluded from the margin of the external naris (see discussion); ventral margin of dentary convex and without sharp inflexion; tooth crowns with straight distal margins and without constriction between root and crown, denticles (see discussion), and no wear facets on the teeth; dorsal centra with oval fossae ventral to the neurocentral suture on the lateral sides of the centra; mid dorsals with well-developed posterior infradiapophyseal lamina directly below the diapophyses, and postzygapophyses posterolaterally divergent, ratio between the entire length of the postzygapophyses and the width between the distal-most tips of the postzygapophyses equal or lower than 0.75 [24].

Desojo & Ezcurra [24] described a lack of denticles on tooth crowns of A. scagliai. However, one of the authors, J. B. Desojo, noted them on the dentary teeth of PVL 2059 after a more detailed examination. Denticles were also observed in UFSM 11505 and are herein described. The tooth description is based on the proposed terminology by Hendrickx et al. [52].

Based on the presence of closed and partially closed neurocentral sutures on the available dorsal and caudal vertebrae [53, 54], UFSM 11505 is more skeletally mature than MCP-13 and PVL 2070, both A. scagliai specimens with an estimated age of 2 and 5 years old respectively [43, 55]. UFSM 11505 is probably a mature specimen based on its estimated size (1.45 meters in length) in comparison with the one-meter long MCP-13 [43] and the holotype (PVL 2073: 1.39 meters estimated length) [43].

Most of the cranial sutures in UFSM 11505 are unfused. Notwithstanding, according to Bailleul & Horner [56], cranial sutures may not fuse progressively during ontogeny in all archosaurs, being able to become even wider. Therefore, the presence of unfused cranial sutures does not imply that UFSM 11505 was an immature individual. Since paleohistological analyses are under way, it is not possible yet to estimate the age of UFSM 11505.

Description of UFSM 11505

The skull is medio-laterally compressed. The right side of the skull was displaced forward, the mid-anterior left side displaced towards the broken mid-anterior right side, so the left hemimandible slid towards the midline, ending up between the maxilla and the right hemimandible. In dorsal view, there is a rupture situated diagonal to the midline beginning from the suture between the right frontal and the right nasal to the medial portion at the left nasal, and separating the skull from side to side. This fracture was repaired and both parts were glued together during preparation.

The posterior part of the skull preserves the occiput, but the braincase is lost. However, it is still possible to observe some elements of the posterior region which were displaced, e.g. quadrate, and elements of the palatal complex, e.g. pterygoids. The latter are displaced, on the left side, between the jugal and the posterior part of the left mandible. Measurements of elements are in Table 1.

[Figure omitted. See PDF.]

Table 1. Maximum measurements (in mm) of the individual elements, fenestrae and fossae of the skull of UFSM 11505.

Asterisk: incomplete; dash: not preserved.

https://doi.org/10.1371/journal.pone.0201450.t001

The teeth are well preserved. Maxillary teeth are present on both sides, albeit incomplete, and all premaxillary teeth are present only on the right side.

Premaxilla.

Both premaxillae are well preserved. Each one is very narrow compared to the maximum width of the skull. The anterior and posterodorsal processes encircle the external naris as in other aetosaurs (Figs 2–4). The posterodorsal process contacts and is overlapped by the anterior process of the nasal. The anterior process of the premaxilla continues anteriorly to form, in lateral view, an anteroposteriorly expanded tip to the contact between the nasal and the premaxilla. In dorsal view, the anterior tip of the premaxilla slightly expands laterally, forming a weakly developed shovel-shape, contrasting with the well-developed shovel-shaped expansion of Stagonolepis robertsoni [7] and Desmatosuchus smalli [42, 57]. This conditioncontrasts with the snout of Aetosaurus ferratus [58], Paratypothorax andressorum [32] and Stenomyti huangae [18] which all lack a lateral expansion. The posterior process of the premaxilla outlines the ventral margin of the external naris. Although broken, it contacts the ventral process of the nasal and excludes the maxilla from the margin of the external naris, as in PVL 2073 and UFSM 11505, respectively the holotype and referred specimens of Aetosauroides scagliai.On the dorsal surface of the posterior process of the premaxilla, within the external naris, a small tubercle is present at the level of the third premaxillary tooth. This tubercle is present in several species of aetosaurs, such as Stagonolepis olenkae [59], Paratypothorax andressorum [32] and Desmatosuchus smallii [42, 57], although being taller in these species than in UFSM 11505. The right premaxilla is broken and it bears, in its mid-posterior portion, five slender teeth. These teeth are smaller in size than the maxillary teeth. The left premaxilla teeth have been broken, and therefore only three alveoli are seen. The anteriormost portion of the premaxilla is edentulous, as in A. ferratus [58], P. andressorum [32] and S. robertsoni [7].

Maxilla.

The maxilla is the most anteroposteriorly extensive bone in the lateral view of the skull, anteriorly extending to the mid-point of the external naris, posteriorly to the posterior end of the antorbital fenestra and dorsally bounds the anterior part of the antorbital fenestra (Figs 2 and 3). There is a well-marked antorbital fossa surrounding the antorbital fenestra, as in Stagonolepis olenkae [59] and Paratypothorax andressorum [32], and its boundary is marked by a fine continuous crest. This fossa is bounded anteriorly by the descending process of the nasal and the maxilla, dorsally by the ventral region of the nasal, ventrally by the maxilla and posteriorly by the lacrimal. The ventral margin of the maxilla is slightly convex and bears five foramina along its anterior portion, whereas along its mid-posterior portion it is marked by a longitudinal crest that borders the posteroventral end of the antorbital fossa. The anterior process is dorsoventrally tall, reducing its height anteriorly and ending up in a labiolingually depressed tip at the midpoint of the external naris. The dorsal surface of this process contacts the ventral surface of the posterior process of the premaxilla. The ascending process is short, contacting dorsally and anteriorly the nasal, and posteriorly the lacrimal. This process also forms the anterior portion of the antorbital fenestra. The posterior process is elongate and somewhat rectangular at its posterior end. It forms the entire ventral margin of the antorbital fenestra and forms the posterior end of this fenestra where it contacts the ventral process of the lacrimal. The antorbital fenestra is triangular in lateral view as in Stagonolepis robertsoni [7] and S. olenkae [59], although proportionally longer. The anterior margin of the antorbital fenestra is also oval as in these latter species, contrasting with the round condition present in Aetosaurus ferratus (SMNS 5770 S-16), Stenomyti huangae [18], Paratypothorax andressorum (SMNS 19003) and Desmatosuchus [42, 57].

Nasal.

The nasal is a slim but long bone that forms the dorsal margin of the external naris. It tapers anteriorly until the contact with the anterior process of the premaxilla (Figs 2–4). There is a ventral projection on its middle portion, which forms the posterior margin of the external naris, and contacts the posterior process of the premaxilla as in most aetosaurs. In dorsal view, the nasal becomes wider posteriorly, contacting the maxilla and the lacrimal ventrally, and posteriorly the prefrontal and the frontal. In dorsal view, a triangular depression is observed, which starts at the midpoint of the nasal, on its midline. This feature continues posteriorly, diverging to the lateral sides, extending through the middle portion of the prefrontal, ending parallel to the posterior margin of the antorbital fenestra.

Prefrontal.

The prefrontal is a triradiate element, with no ridges (Figs 2–4). Posteriorly it forms the upper anterior margin of the orbital fenestra. The dorsal process extends to form a small portion of the anterior margin of the orbital fenestra, also contacting the ventral margin of the frontal. The ventral process is short and, descending, contacts the upper posterior margin of the lacrimal. The anterior process extends to contact a small portion of the posterior portion of the nasal, and laterally the dorsal margin of the lacrimal. Parallel to the dorsal margin of the lacrimal, as mentioned above, the depression that started at the midpoint of the nasal continues, terminating before the ventral process of the prefrontal starts.

Frontal.

The frontal is a rectangular bone, longer than wide, as in other aetosaurs. The frontal is two-thirds the length of the nasal,is poorly ornamented (as only three or four grooves are seen per cm), forming most of the superior portion of the orbit and is unfused (Figs 2–4). A depression in this bone surrounds the orbit. It also tapers anteriorly towards the nasal, forming a Z-shaped suture, laterally with the anterior tip of the prefrontal, and posteriorly with the parietal. The right frontal is broken at its anterior portion, overlapping the left frontal and nasal elements. Near the suture between this bone and the nasal, the continuation of the triangular depression that started at the midline of the nasal is seen, fitting the anterior tip of the frontal into this depression.

Postfrontal.

The postfrontal is a triradiate bone, like the prefrontal. It is only preserved on the right side of the skull, where it forms, posterodorsally, a tiny portion of the orbit. It tapers posterodorsally to the ventral margin of the parietal, and anterodorsally to the posteroventral margin of the frontal.

Parietal.

The parietals are unfused and broken transversally at their posterior portion, showing a semi-circular convex and thick shape, not flat, in occipital view. In this view, it is possible to see the posterior region of the endocranial cavity, completely displaced below the parietals and towards the right side. In dorsal view (Fig 4), it is possible to measure its width, although not at the midpoint, which is wider than the frontal (see Table 1). The parietal is more ornamented than the frontals, with three crests on the left parietal, and a few grooves (Fig 4).

Lacrimal.

The lacrimal is an extensive three-pronged bone that forms most of the margin of the antorbital fenestra. Its posterior end forms the anterior margin of the orbit, dorsally tapering to the ventral margin of the prefrontal (Figs 2 and 3). It also tapers dorsally to the very anterior ventral portion of the frontal and the very posterior ventral portion of the nasal. Its ventral branch forms the posterior end of the antorbital fenestra, contacting the tip of the posterior process of the maxilla. The ventral branch also has a ridge along its length, near the suture with the prefrontal, which forms the posterior margin of the antorbital fossa. The anterior branch tapers to the dorsal margin of the antorbital fenestra, reaching the posterior margin of the ascending process of the maxilla. The ridge along the ventral branch continues on the anterior branch, following the suture with the ventral margin of the prefrontal and the nasal, forming the dorsal margin of the antorbital fossa.

Jugal.

Excluded from the margin of the antorbital fenestra and fossa by the contact of the lacrimal with the maxilla, the jugal forms the ventral margin of the orbit (Figs 2 and 3). It antero-dorsally contacts a tiny portion of the lacrimal and anteriorly the posterior end of the maxilla. Despite the posterior portion of jugal being broken, the ridge that is present along the lateral surface of the maxilla continues along the jugal, and it is not dorsoventrally constricted. There is no ventral inclination of the jugal that is present in Desmatosuchus [42].

Quadrate.

Only the right quadrate is preserved (Fig 5). In spite of being partially displaced, the quadrate is still articulated with the corresponding hemimandible. The quadrate body is bell-shaped in posterior view, and bears no projections, whereas the quadrate head is missing. The mandibular articulation has two condyles, one ventrally and the other anteriorly oriented, bounded by a thin ridge along the quadrate body and perpendicular to the ventral condyle. Moreover, a concave surface for the quadratojugal contact is present between the body ridge and the anterior condyle. It is not possible to observe either the synovial basal, the optical joints or the quadrate foramen.

[Figure omitted. See PDF.]

Fig 5. Right quadrate in dorsal-lateral view.

Abbreviations: qb, quadrate body; qjc, quadratejugal contact; vc, ventral condyle; ac, anterior condyle; qr, quadrate ridge.

https://doi.org/10.1371/journal.pone.0201450.g005

Dentary.

The dentary is gently convex along its ventral margin and posterodorsally it participates in the anterior margin of the oval external mandibular fenestra, and branches off at its posterior end (Fig 2). The upper branch contacts the surangular, forming the anterodorsal margin of the mandibular fenestra; the lower branch contacts the angular, forming the anterior and part of the ventral margins of the external mandibular fenestra, where a slight inflexion of the splenial on the ventral margin occurs, as in Aetosaurus ferratus [58]. The anterior portion of the dentary is edentulous, and only two teeth are preserved posteriorly in this region. At least two alveoli are present, and both are located alongside the preserved teeth.

Angular.

The angular extends anteriorly forming the ventral margin of the mandibular fenestra (Fig 2). It is a narrow bone and slightly bowed on its ventral margin, maintaining its width throughout its length. On its posterior third, the angular contacts the ventral margin of the surangular, thickening and terminating in a small projection under the surangular.

Surangular.

The surangular frames the mandibular fenestra dorsally and posteriorly. A rounded tuber on the dorsal margin of this bone is present (Fig 2), as in both Stagonolepis species, although it is shorter, as in Stenomyti [18]. The surangular sutures with the angular along its ventral margin on its posterior end, as in A. ferratus, in an oblique suture, and forms a posteroventral projection that expands dorsoventrally, where it houses a surangular foramen close to the glenoid fossa.

Splenial.

The splenial is a thin and anteriorly sharp bone, observed in left medial view on the right side of the lower jaw. The displaced left lower jaw covers its posterior portion, and it is only possible to affirm that the splenial covers its medial surface. In right lateral view, the medial ventral margin of the splenial is visible right below the suture between the angular and the surangular, and it is visible only in this region (Fig 2). In ventral view, the splenial follows the dentary anteriorly in length, having a straight suture with it. Because the medial anterior tip of the splenial is broken, the mylohyoid foramen is not observable.

Dentition

UFSM 11505 preserves homodont posteriorly recurved teeth with thecodont implantation, and with crown measuring 5–6 mm tall. Most teeth are preserved and were found in situ, with one tooth found isolated near the skull, which is most likely to be a dentary tooth based on its morphology. None of the teeth has constriction or swelling at the base of the crown, and all are distally recurved. The presence of serrations and the cross-section form vary depending on the position of tooth.

Premaxillary teeth.

The right premaxilla bears five elongate teeth mid-posteriorly located, slightly recurved, without any constrictions and with the same width from crown base to apex (cylindrical-shaped). There is no evidence of wear facets, serrations or ornamentation. No teeth of the left premaxilla are preserved.

Maxillary teeth.

The maxillary teeth are labiolingually compressed, distally recurved with an oval cross-section. In lateral view, the maxillary tooth crowns possess similar edge morphology, being convex on the mesial margin and concave on the distal margin. There is a straight and serrated carina along the mesial and distal crown margins, with 8 denticles per mm (Fig 6). There are no fluting or ridges along the crown.

[Figure omitted. See PDF.]

Fig 6. Teeth of referred specimen of Aetosauroides scagliai (UFSM 11505).

(A-B) First two preserved teeth of the left maxilla. (C-D) Isolated dentary tooth. (E-F) Last three preserved teeth of the left maxilla. Arrows indicate serrations. Abbreviations: as Fig 2.

https://doi.org/10.1371/journal.pone.0201450.g006

Dentary teeth.

The dentary teeth are lanceolate in cross-section, with a pronounced distal carina along the crown. The crown is strongly distally recurved from its middle to apex, forming a “bent knee” at the base-apex midline. The teeth are smooth, without grooves or ridges, and are smaller than the maxillary teeth.

The amount of new information allowed us to reconstruct a model of the skull of Aetosauroides scagliai, based on the models of Casamiquela [15, 28] and Desojo & Ezcurra [24]. This reconstruction is shown in Fig 7 along with reconstructions of Aetosaurus ferratus [58], Paratypothorax andressorum [32], Stagonolepis robertsoni [7] and Desmatosuchus smalli [42, 57].

[Figure omitted. See PDF.]

Fig 7. Skull reconstructions of some aetosaur species and, in detail, the referred snout in dorsal view of each species.

(A) Aetosaurus ferratus (modified from Schoch [58]). (B) Paratypothorax andressorum (modified from Schoch & Desojo [32]). (C) Stagonolepis robertsoni (modified from Walker [7]). (D) Desmatosuchus smalli (modified from Small [42]). (E) Aetosauroides scagliai (modified from Desojo & Ezcurra [24]). Dotted lines represent unpreserved bones. Abbreviations: a, angular; aof, antorbital fenestra; ar, articular; d, dentary; f, frontal; j, jugal; l, lacrimal; m, maxilla; maf, mandibular fenestra; n, nasal; p, parietal; pf, postfrontal; pmx, premaxilla; pm-pr, dorsal projection of premaxilla; po, postorbital; prf, prefrontal; q, quadrate; qj, quadratojugal; sp, splenial; sq, squamosal.

https://doi.org/10.1371/journal.pone.0201450.g007

Phylogenetic analysis

The present description of the skull in UFSM 11505 has provided a set of previously unknown cranial traits of Aetosauroides scagliai (e.g. premaxilla, tooth morphology; including new information on eight characters of the data matrix) and on aetosaur skull anatomy in general. These features provide the necessary information to update existing cladistic analyses and, therefore, answer some questions about aetosaur phylogeny (see discussion).

For our phylogenetic analysis, we use the most recent data matrix [60], which was originally composed of 83 characters and 28 taxa. We combine the scorings of the specimen SMSN 19003, kept by Parker [60] as a separate OTU (Operational Taxonomic Unit), with Paratypothorax andressorum following the assignment made by Schoch & Desojo [32]. Thus the resulting matrix contains 83 characters and 28 taxa by the addition of UFSM 11505 as a separate OTU to test the specimen position.

Parker [60] ordered seven characters, and we kept the same characters as additive (ordered). The rauisuchid Postosuchus kirkpatricki Chatterjee [61] was used to root the recovered most parsimonious trees (MPTs) and Revueltosaurus callenderi [62], a pseudosuchian, was used as a second outgroup, as R. callenderi is consistently found as the sister-group of Aetosauria [63].

The data matrix was analyzed under equally weighted maximum parsimony using TNT 1.5 [64]. Zero-length branches among any of the recovered MPTs were collapsed according to rule 1 of Coddington & Scharff [65].

Five previously unknown characters for A. scagliai were scored for UFSM 11505 (1:1; 12:0; 13:0; 31:1, 35:0) and four characters were modified from the previous matrix for the holotype (5:0→1, 19:1→0, 30:0→1, 35:0→?). For more details, see Discussion.

We ran our analysis of the adapted matrix from Parker [60] using traditional search of 100 replications of Wagner trees (with random addition sequence), followed by TBR branch swapping algorithm (holding 10 trees per replicate). The analysis resulted in 34 MPTs with 205 steps. The strict consensus of this tree is provided in Fig 8A, featuring a large polytomy at the base of Aetosauria. To resolve this polytomy, we ran positional congruence (reduce) index (PCR) according to methodology presented in Pol & Escapa [66], aiming to measure the stability of used taxa. This analysis recovered Aetobarbakinoides brasiliensis [22], Stenomyti huangae [18], and Polesinesuchus aurelioi [23] as the most unstable taxa in the analysis. We excluded these three taxa a posteriori, resulting in a matrix of 83 characters and 25 taxa, and ran an analysis with the same configuration as the first analysis. This analysis resulted in 6 MPTs with 193 steps. The strict (= Nelsen) consensus tree is showed in Fig 8B. As Coahomasuchus kahleorum [17] formed a trichotomy with both the unnamed group formed by UFSM 11505 + A. scagliai and the Stagonolepididae (sensu Parker [60]), and an examination of the 6 MPTs demonstrated that this taxon occurs in 2 possible positions, it was pruned a posteriori. The strict (= Nelsen) consensus tree of these 6 MPTs with Bremer support after pruning of Coahomasuchus kahleorum is provided (Fig 9).

[Figure omitted. See PDF.]

Fig 8.

Strict (= Nelsen) consensus of 34 (A) and 6 (B) MPTs. (A) Strict consensus of the 34 MPTs with large polytomy. (B) Strict consensus of the 6 MPTs after a priori pruning of Aetobarbakinoides brasiliensis, Stenomyti huangae and Polesinesuchus aurelioi.

https://doi.org/10.1371/journal.pone.0201450.g008

[Figure omitted. See PDF.]

Fig 9. Strict (= Nelsen) consensus of the 6 MPTs used for this study after a posteriori pruning of Coahomasuchus kahleorum.

Bremer support values are shown for all nodes.

https://doi.org/10.1371/journal.pone.0201450.g009

Discussion

Both the osteology description and phylogenetic analysis revealed some interesting traits for Aetosauroides scagliai. Here we discuss the new character states recognized for this taxon.

Teeth have a variable morphology within Aetosauria. Taxa with plesiomorphic character states [60], such as Aetosaurus ferratus, Norian age, presents bulbous and not recurved crowns [58], as in Stenomyti huangae [18] and Paratypothorax andressorum [32]. None of them have serrated teeth. This contrasts with tooth morphology of Stagonolepis robertsoni [7], of Carnian age, which has a “leaf-like” shape in labial/lingual view, mediolaterally compressed and with a denticulate mesial margin [7]. UFSM 11505 teeth, as mentioned in the description, are oval in occlusal view and posteriorly recurved in labial/lingual view, without a constriction between root and crown, and possess denticles on both the mesial and distal regions. In Parker contribution [60], tooth morphology is described for A. scagliai, because PVL 2059, its referred material, has one maxillay tooth and poorly preserved dentary teeth. Nonetheless, it is not possible to know if the only maxillary tooth of PVL 2059 is recurved or not, as its crown is broken. Accordingly, we modified the state of the character 35 of Parker [60] for A. scagliai from fully recurved (state 0) to unknown (?). Within Archosauriformes, tooth serrations are present in nearly all in-group clades and considered a plesiomorphic condition, as in Postosuchus kirkpatricki and Revueltosaurus callenderi [39, 67], used here as outgroup and second outgroup, respectively. As A. scagliai is herein recovered as the sister-taxon of all other members of Aetosauria, confirming previous studies [22, 32, 60, 68], and both UFSM 11505 and PVL 2059 having serrations on their teeth, these could indicate the presence of denticles as a plesiomorphic characteristic within Aetosauria.

The variation of morphology between premaxillary and maxillary teeth is also another feature present in UFSM 11505. As mentioned before, premaxillary teeth are cylindrical in shape, and slightly recurved, in contrast with the oval shape in occlusal view and recurved maxillary teeth. Variation between premaxillary and maxillary teeth is also seen in Aetosaurus, in which maxillary teeth are “more bulbous and slightly longer than those of the premaxilla” [58].

Another peculiarity within Aetosauria is the shape of premaxilla, which is one of the key elements to understand [Aetosauria phylogeny more completely. Two general shapes of the premaxilla in dorsal view are known for aetosaurs: an anteromedially tapering and a laterally expanded premaxilla, known as “shovel-shaped” [60, 69]. Desmatosuchus smalli [42, 57] and Stagonolepis robertsoni [7] both posses a laterally expanded premaxilla, maintaining a nearly constant width until the apex [60]. In Aetosaurus ferratus [58], Stenomyti huangae [18] and Paratypothorax andressorum [32], the premaxilla tapers anteromedially. Neither the holotype of A. scagliai, PVL 2073, and referred materials in previous studies [15, 28, 29, 38, 60] had the premaxilla preserved, so it was not possible to tell which shape it had. However, UFSM 11505 preserves a premaxilla that is gently laterally expanded, herein described as having a “smooth shovel-shape”, more similar to Desmatosuchus than to Aetosaurus. In the phylogeny proposed by Parker [60] and herein corroborated, Aetosauroides scagliai is a non-stagonolopididae aetosaur sister with all Stagonolepididae aetosaurs. Two branches form Stagonolepididae: Desmatosuchia and Aetosaurinae. Desmatosuchus and Stagonolepis are branched within Desmatosuchia, and A. ferratus, S. huangae and P. andressorum are branched within Aetosaurinae. As Aetosauroides scagliai is a basal taxon within Aetosauria, the character presented by UFSM 11505 supports the plesiomorphic condition for the clade, and could indicate that the expansion of the premaxilla may have a tendency to disappear in Aetosaurinae, as in Aetosaurus, Stenomyti and Paratypothorax, or expand more, as defined by Parker [60] in Desmatosuchia, as in Stagonolepis and Desmatosuchus.

The premaxilla also has, in some taxa, its dorsal surface with a prominent dorsal tubercle that extends into the external naris. This feature was not described for A. scagliai (PVL 2059) because the exact portion where this tubercle is located is broken, and therefore the tubercle is not preserved. However, it is possible to observe a small tubercle on UFSM 11505, less prominent than that of Stagonolepis and Desmatosuchus, and similar to that of Stenomyti.

The jugal, according to Nesbitt [67], in most archosauriforms, its ventral margin is horizontally oriented. This is also seen in Paratypothorax andressorum, and is in contrast with other aetosaurs, such as Desmatosuchus, Stagonolepis robertsoni and Neoaetosauroides engaeus Bonaparte [16], which have a posteroventrally inclined ventral margin of the jugal. The jugal was not preserved either in the holotype of A. scagliai or in the referred materials [15, 28, 29, 38, 60]. In lateral view, the jugal of UFSM 11505 appears to have a nearly horizontal ventral margin, with no inclination in any direction. Additionally, the anterior process of the jugal is excluded from the border of the antorbital fenestra by the contact between the lacrimal and maxilla in UFSM 11505, as seen in other pseudosuchians such as Postosuchus kirkpatricki and Revueltosaurus [67], both used as outgroups. The jugal is also excluded from the antorbital fenestra in Stenomyti, Aetosaurus, Paratypothorax and Coahomasuchus kahleorum [17], contrasting with the character state present in Desmatosuchia (sensu Parker [60]), where the jugal participates in the formation of the antorbital fenestra margin, as in Desmatosuchus and Stagonolepis. Therefore, A. scagliai retains basal plesiomorphic character states of the jugal.

UFSM 11505 presents, on the dorsal margin of the surangular, a prominent rounded tuber (state 1 of character 5). This character state is seen in both Stagonolepis species, S. olenkae Sulej [59], S. robertsoni and also in Stenomyti huangae. As the posterior portion of the mandible was previously unknown for A. scagliai, the prominent rounded tuber was here assigned as present (state 1) for this species.

Regarding the parietals and frontals, Parker [60], in his data matrix, assigned to character 19 (comparison of transverse width between frontals and parietals at anteroposterior mid-points) a frontal element wider than the parietal (state 1), as in Desmatosuchus and Stagonolepis, without a description or comment on the characters list. On the first descriptions of Aetosauroides skull [15, 28, 29], no observations of the size of these elements were taken, as the parietals were not preserved. On UFSM 11505, although the parietals are broken at their posterior portion, it is possible to verify that their widths at the anterior portion are wider than the midpoint of frontals (see Table 1). Hence, it was assigned here as parietals wider than the frontals (state 0), as occur in Aetosaurus ferratus and Stenomyti.

On the “slipper-shaped” mandible of aetosaurs, Parker [60] modified a character on the data matrix of Heckert & Lucas [17] (character 15) in two different characters (29 and 30 of Parker [60]). Character 29 was described as the ventral margin of the mandibular ramus in lateral view, which is gradually convex in A. scagliai (state 0), an autapomorphy for this species [24], and with an inflexion of the splenial or the dentary in other Stagonolepidid (sensu Parker [60]) aetosaurs. Character 30 was described as the anterior end of the dentary in lateral view, which, as described by Parker [60], has a rounded termination in A. scagliai, as the author observed in PVL 2059, and tapers to an acute point in all other aetosaurs, as contributing to the “slipper-shape” of the mandibular ramus. However, this character is not preserved in PVL 2059, and it is not possible to tell if the anterior end is indeed rounded, contradicting the affirmation. In UFSM 11505, the anterior end tapers to an acute point (state 1), as all other Aetosauria taxa. However, it does not contribute to the “slipper-shaped” mandible, as A. scagliai has a gradually convex mandibular ramus. Therefore, the state of character 30 was modified from state 0 (dentary with rounded anterior end) to 1 (anterior end of dentary tapers to an acute point) for A. scagliai.

We also discuss some specific questions regarding the new states of characters. Here we summarize and discuss briefly two questions we found relevant to be answered in this study.

1) Is the exclusion of the maxilla from the external naris a case of intraspecific variation?

In archosaurs, the skull exhibits a trend to exclude the maxilla from the formation of the external naris, and it is preserved to a variable degree in the descendent groups [70], such as in Pseudosuchia where the maxilla participates in the external naris margin [67]. The character state of the maxilla excluded from the external naris is present in A. scagliai and the outgroup Postosuchus kirkpatricki but not in all other Aetosauria. In both referred materials of A. scagliai in Desojo & Báez [26] and Parker [60] (PVL 2059 and PVL 2052), this autapomorphy is preserved. Considering the trend in archosaurs to exclude the maxilla from the external naris and the place occupied by UFSM 11505 in this phylogeny as an early diverging aetosaur taxon, in a dichotomy with A. scagliai, confirms this condition as a plesiomorphic state of this character. On the other hand, in Stagonolepidid aetosaurs, this character is modified until the maxilla participates in the margin of the external naris [7, 24, 32, 58, 59].

Additionally, in UFSM 11505, the descending process of nasal and ascending process of premaxilla are covering the maxilla and fractured in their tips, which makes the maxilla appears to be participating of the external naris margin. Thereby, this could be an intraspecific variation of this character, implying the tendency in Aetosauria of the participation of the maxilla in the external naris margin.

2) The smooth shovel-shaped premaxilla: are this and other characters states in A. scagliai plesiomorphic?

To understand the position occupied by Aetosauroides, first it is necessary to understand the problem of the phylogenetic placement of Aetosaurus ferratus within Aetosauria.

In a revision of Aetosaurus ferratus, Schoch [58] recognized for this taxon a shorter premaxilla with an edentulous and very short anterior portion, and the anterior end of premaxilla without lateral expansion. The author defined them as plesiomorphic characters states in accordance to other phylogenetic studies that placed Aetosaurus at the base of Aetosauria (e.g. [17, 69]), and Aetosauroides as a sister taxon of Stagonolepis [69]. However, recent phylogeny studies recovered not only A. ferratus nested within Stagonolepididae [19] but also in a polytomy with Coahomasuchus kahleorum and Typothoracinae [60], in contrast with studies mentioned above and others that pulled Aetosaurus to the base of the tree, along with Aetosauroides scagliai [22, 24, 68].

It is considered here that the Aetosaurus ferratus characters mentioned above as plesiomorphic are unique within Aetosauria. For Cerda & Desojo [71] and Schoch & Desojo [32], these traits regarded as plesiomorphic are more likely to be interpreted as of a juvenile form. Notwithstanding, Aetosaurus ferratus presents another set of characters that seem to show trends among derived taxa within the group. In this regard, Aetosauroides scagliai possesses features that resemble both with characters of the outgroup and with early characters of Aetosauria, independent of ontogenetic states: (1) the exclusion of the maxilla from the margin of the external naris, present in Aetosauroides but not in Aetosaurus nor in any other Aetosauria taxon; (2) smoothly expanded premaxilla may indicate a state of character in which the expansion could disappear, as in Aetosaurus and Stenomyti, or expand more, as in Stagonolepis and Desmatosuchus; (3) the presence of conical teeth, not bulbous, is a characteristic within Pseudosuchia [36] and present in Aetosauroides, but not in other Aetosauria taxa, which bear bulbous teeth (Aetosaurus, Stagonolepis, Stenomyti, Desmatosuchus); (4) the presence of premaxillary teeth is a “primitive” characteristic in tetrapods [70] and is present in Aetosauroides and Typothoracinae (sensu Parker [60]), but absent in derived taxa as Desmatosuchus.

As the herein presented phylogenetic analysis strongly supports Aetosauroides scagliai at the base of the tree, the state of characters mentioned above could be considered plesiomorphic for Aetosauroides, corroborating previous studies [22, 32, 60].

Conclusions

The recognition of hitherto unknown skull character states for Aetosauroides scagliai, like the smooth shovel-shaped premaxilla, the recurved and unconstricted teeth, and the presence of a tuber on the surangular allows greater knowledge on the anatomy of this species and the identification of plesiomorphic characters states within Aetosauria. Additionally, the result of our phylogenetic analysis confirms A. scagliai at the base of Aetosauria and reinforces the former as the earlier species within this group.

Our analysis, along with other studies (e.g. [24, 32, 58, 60, 68, 72]) emphasizes the importance of detailed descriptions and phylogeny reviews to define the characters, aiming to recognize them as plesiomorphic or as characteristics of juveniles that may vary with ontogeny. Hence, the obtainment of a more accurate phylogeny and a better knowledge of Aetosauria in general can be achieved in future studies.

Supporting information

[Figure omitted. See PDF.]

S1 Supporting Information. Character/Taxon matrix.

https://doi.org/10.1371/journal.pone.0201450.s001

(TXT)

Acknowledgments

We thank Luiz Flavio P. Lopes (UFRGS) for the photographies, Claudio Bortolaz (Museu Padre Daniel Cargnin, Mata, RS, Brazil) for the earlier preparation of the skull, Marcel Lacerda and Belén von Baczko for the discussions. Thanks to Bryan Small, Bruna Cielo Cabrera and Maira da Silva Otaran for English revisions, and PLOS ONE editor Thierry Smith and reviewers for the comments.

Citation: Biacchi Brust AC, Desojo JB, Schultz CL, Paes-Neto VD, Da-Rosa ÁAS (2018) Osteology of the first skull of Aetosauroides scagliai Casamiquela 1960 (Archosauria: Aetosauria) from the Upper Triassic of southern Brazil (Hyperodapedon Assemblage Zone) and its phylogenetic importance. PLoS ONE 13(8): e0201450. https://doi.org/10.1371/journal.pone.0201450

References

1. Desojo JB, Heckert AB, Martz JW, Parker WG, Schoch RR, Small BJ, et al. Aetosauria: a clade of armoured pseudosuchians from the Upper Triassic continental beds. In: Nesbitt SJ, Desojo JB, Irmis RB, eds. Anatomy, Phylogeny, and Palaeobiology of Early Archosaurs and their Kin. Geol Soc Spec Publ. 2013;379:203–239. https://doi.org/10.1144/sp379.17

2. Agassiz L. Monographie des poissons fossiles du Vieux Grés Rouge ou Système Dévonien (Old Red Sandstone) des Iles Britanniques et de Russie. Neuchatel: Jent et Gassman. 1844. https://doi.org/10.5962/bhl.title.5752 French.

3. Huxley TH. On the Stagonolepis robertsoni (Agassiz) of the Elgin Sandstone; and on the recently discovered footmarks in the Sandstones of Cummingstone. Proceedings of the Geological Society. 1859;15:440–460.

4. Fraas O. Aetosaurus ferratus Fr. Die gepanzerte Vogel-Echse aus dem Stubensandstein bei Stuttgart: Festschrift zur Feier des vierhundertjährigen Jubiläums der Eberhard-Karls-Universität zu Tübingen. Wurttembergische Naturwissenschaftliche Jahreshefte. 1877;33:1–22. German.

5. Nicholson HA, Lydekker RA. Manual of Palaeontology for the Use of Students, with a General Introduction on the Principles of Paleontology. Edinburgh: William Blackwood & Sons. 1889.

6. Cope ED. Report on the geology of that part of northwestern New Mexico examined during the field season of 1874. In: Wheeler GM, ed. Annual report upon the geographical explorations west of the one hundredth meridian in California, Nevada, Nebraska, Utah, Arizona, Colorado, New Mexico, Wyoming and Montana. United States Government Printing Office. 1875;981–1017.

7. Walker AD. Triassic reptiles from the Elgin area: Stagonolepis, Dasygnathus and their allies. Philos Trans R Soc Lond B Biol. 1961;244(709):103–204.

8. Long RA, Ballew KL. Aetosaur dermal armor from the Late Triassic of southwestern North America, with special reference to material from the Chinle Formation of Petrified Forest National Park. In: Colbert EH, Johnson RR, eds. The Petrified Forest Through the Ages, 75th Anniversary Symposium. 1981. Mus North Ariz Bull. 1985;54.

9. Lucas SG, Hunt AP, Kahle R. Late Triassic vertebrates from the Dockum Formation near Otis Chalk, Howard County, Texas. In: Love DW, Hawley JW, Kues BS, Adams JW, Austin GS, Barker JM, eds. Carlsbad Region, New Mexico and West Texas. 44th Field Conference. 1993;237–244. Albuquerque: New Mexico Geological Society.

10. Heckert AB, Lucas SG. First occurrence of Aetosaurus (Reptilia: Archosauria) in the Upper Triassic Chinle Group (USA) and its biochronological significance. Neues Jahrb Geol Palaontol Abh. 1998:604–612.

11. Heckert AB, Lucas SG. Taxonomy, phylogeny, biostratigraphy, biochronology, paleobiogeography, and evolution of the Late Triassic Aetosauria (Archosauria: Crurotarsi). Zentralblatt für Geologie und Paläontologie Teil I. 2000; 1539–1587.

12. Lucas SG, Heckert AB, Huber P. Aetosaurus (Archosauromorpha) from the Upper Triassic of the Newark Supergroup, eastern United States, and its biochronological significance. Palaeontology. 1998;41:1215–1230.

13. Small BJ. The occurrence of Aetosaurus in the Chinle Formation (Late Triassic, USA) and its biostratigraphic significance. Neues Jahrb Geol Palaontol Abh. 1998;285–296.

14. Parker WG, Martz JW. The Late Triassic (Norian) Adamanian–Revueltian tetrapod faunal transition in the Chinle Formation of Petrified Forest National Park, Arizona. In: Butler RJ, Irmis RB, Langer MC, Smith AB, eds. Late Triassic Terrestrial Biotas and the Rise of Dinosaurs. Earth Environ Sci Trans R Soc Edinb. 2011;231–260.

15. Casamiquela RM. Noticia preliminar sobre dos nuevos estagonolepoideos Argentinos. Ameghiniana. 1960;2:3–9. Spanish.

16. Bonaparte JF. Dos nuevas ‘faunas’ de reptiles triásicos de Argentina. Gondwana Stratigraphy, I.U.G.S. Symposium. 1969;283–306. Spanish.

17. Heckert AB, Lucas SG. A new aetosaur (Reptilia: Archosauria) from the Upper Triassic of Texas and the phylogeny of aetosaurs. J Vertebr Paleontol. 1999;19:50–68.

18. Small BJ, Martz JW. A new basal aetosaur from the Upper Triassic Chinle Formation of the Eagle Basin, Colorado, USA. In: Nesbitt SJ, Desojo JB, Irmis RB, eds. Anatomy, Phylogeny and Palaeobiology of Early Archosaurs and their Kin. Geol Soc Spec Publ. 2013;379:393–412.

19. Parker WG. Reassessment of the aetosaur ‘Desmatosuchus’ chamaensis with a reanalysis of the phylogeny of the Aetosauria (Archosauria: Pseudosuchia). J Syst Palaeontol. 2007;5:41–68.

20. Parker WG, Martz JW. Using positional homology in aetosaur (Archosauria: Pseudosuchia) osteoderms to evaluate the taxonomic status of Lucasuchus hunti. J Vertebr Paleontol. 2010;30(4):1100–1104.

21. Casamiquela, RM. Nota sobre restos de un reptil aetosauroideo (Thecodontia, Aetosauria) de Quimal, Cordillera de Domeyko, Antofagasta. Prueba de la existencia del Neotriásico continental en los Andes del Norte de Chile. In: Congreso Latinoamericano de Paleontología. 1980;1:135–142. Spanish.

22. Desojo JB, Ezcurra MD, Kischlat EE. A new aetosaur genus (Archosauria: Pseudosuchia) from the early Late Triassic of southern Brazil. Zootaxa. 2012;3166:1–33.

23. Roberto-da-Silva LC, Desojo JB, Cabreira SRF, Aires ASS, Müller RT, Pacheco CP, et al. A new aetosaur from the Upper Triassic of the Santa Maria Formation, southern Brazil. Zootaxa. 2014;3764:240–278. pmid:24870635

24. Desojo JB, Ezcurra MD. A reappraisal of the taxonomic status of Aetosauroides (Archosauria, Aetosauria) specimens from the Late Triassic of South America and their proposed synonymy with Stagonolepis. J Vertebr Paleontol. 2011;31:596–609.

25. Desojo JB. New data on the Late Triassic aetosaur Neoaetosauroides Bonaparte, 1969 from the Los Colorados Formation, west-central Argentina. J Vertebr Paleontol. 2002;22(3).

26. Desojo JB, Báez AM. ¿Es Aetosauroides Casamiquela, 1960 (Amniota: Aetosauria) sinónimo junior de Stagonolepis?. In: Reunión Anual de Comunicaciones de la Asociación Paleontológica Argentina. Ameghiniana. 2005;42(4):24–25. Spanish.

27. Desojo JB, Báez AM. Cranial morphology of the Late Triassic South American archosaur Neoaetosauroides engaeus: evidence for aetosaurian diversity. Palaeontology. 2007;50(1):267–276.

28. Casamiquela RM. Dos nuevos estagonolepoideos Argentinos (de Ischigualasto, San Juan). Revista de la Asociación Geológica Argentina. 1961;16:143–203. Spanish.

29. Casamiquela RM. Materiales adicionales y reinterpretación de Aetosauroides scagliai (de Ischigualasto, San Juan). Revista del Museo de La Plata, Paleontologia Serie 5. 1967;33:173–196. Spanish.

30. Zacarias JD. Uma nova espécie de tecodonte aetossauro (Aetosauroides subsulcatus, sp. nov.) da Formação Santa Maria, Triássico de Rio Grande do Sul, Brasil. MS thesis. Brazil: Federal University of Rio Grande do Sul, Porto Alegre. 1982. Portuguese.

31. Barberena MC, Araújo DC, Lavina EL. Late Permian and Triassic tetrapods of southern Brasil. Natl Geogr Res. 1985;1:5–20.

32. Schoch RR, Desojo JB. Cranial anatomy of the aetosaur Paratypothorax andressorum Long & Ballew, 1985, from the Upper Triassic of Germany and its bearing on aetosaur phylogeny. Neues Jahrb Geol Palaontol Abh. 2016;279(1):73–95.

33. Parker WG. Revised phylogenetic analysis of the Aetosauria (Archosauria: Pseudosuchia); assessing the effects of incongruent morphological character sets. PeerJ. 2016;4:e1583. pmid:26819845

34. Cope ED. Synopsis of the extinct batrachia, reptilia and aves of North America. Transactions of the American Philosophical Society. 1869; 14(1):1–252.

35. Gauthier J, Padian K. Phylogenetic, functional, and aerodynamic analyses of the origin of birds and their flight. In: Jhomk H, Viohl G & Wellnhofer P editors. The Beginning of Birds. Eichstatt: Freunde des Jura Museums. 1985;185–197.

36. Zittel KA. Handbuch der Paläontologie. Abteilung 1: Paläozoologie Band III. Vertebrata (Pisces, Amphibia, Reptilia, Aves). Munich and Liepzig, Oldenbourg. 1887–1890. German.

37. Marsh OC. The classification and affinities of dinosaurian reptiles. Nature. 1884;31:68–69.

38. Desojo JB. Los aetosaurios (Amniota, Diapsida) de América del Sur: sus relaciones y aportes a la biogeografía y bioestratigrafía del Triásico continental. PhD thesis, Universidad de Buenos Aires. 2005. Spanish

39. Ezcurra MD. The phylogenetic relationships of basal archosauromorphs, with an emphasis on the systematics of proterosuchian archosauriforms. PeerJ. 2016;4:e1778. pmid:27162705

40. Martinez RN, Apaldetti C, Alcober OA, Columbi CE, Sereno PE, Fernandez E, et al. Vertebrate succession in the Ischigualasto Formation. In: Sereno PC, ed. Basal Sauropodomorphs and the Vertebrate Fossil Record of the Ischigualasto Formation (Late Triassic: Carnian-Norian) of Argentina. J Vertebr Paleontol. 2013;32:10–30.

41. Cohen K.M., Finney S.C., Gibbard P.L. & Fan J.-X. (updated). The ICS International Chronostratigraphic Chart. 2017;36:199–204.

42. Small BJ. Cranial anatomy of Desmatosuchus haplocerus (Reptilia: Archosauria: Stagonolepididae). Zool J Linn Soc. 2002;136(1):97–111.

43. Taborda JRA, Cerda IA, Desojo JB. Growth curve of Aetosauroides scagliai Casamiquela 1960 (Pseudosuchia: Aetosauria) inferred from osteoderm histology. In: Nesbitt SJ, Desojo JB, Irmis RB, eds. Anatomy, Phylogeny and Palaeobiology of Early Archosaurs and their Kin. Geol Soc Spec Publ. 2013;379:413–424. https://doi.org/10.1144/sp379.19

44. Da-Rosa AAS, Waichel BL, Peixoto DV, Del-Mouro L, Rogério DW, Pazzinato GO. Primeiro registro de crânio de aetossauro para o Neotriássico do sul do Brasil. In: Martello AR, Kotzian CB. Boletim de Resumos da Reunião Anual da Sociedade Brasileira de Paleontologia “Paleo”, Sociedade Brasileira de Paleontologia. 2009. Portuguese.

45. Horn BLD, Melo TM, Schultz CL, Philipp RP, Kloss HP, Goldberg K. A new third-order sequence stratigraphic framework applied to the Triassic of the Paraná Basin, Rio Grande do Sul, Brazil, based on structural, stratigraphic and paleontological data. J South Am Earth Sci. 2014;55:123–132.

46. Da-Rosa AAS. Sítios fossilíferos de Santa Maria, RS. Ciência & Natura. 2004;26(2):75–90. Portuguese.

47. Da-Rosa AAS. Geological context of the dinosauriform-bearing outcrops from the Triassic of Southern Brazil. J South Am Earth Sci, 2015;61:108–119.

48. Zerfass H, Lavina EL, Schultz CL, Garcia AJV, Faccini UF, Chemale JF. Sequence stratigraphy of continental Triassic strata of southernmost Brazil: a contribution to Southwestern Gondwana paleogeography and paleoclimate. Sediment Geol. 2003;161:85–105.

49. Horn BLD, Schultz CL, Figueiredo AEQ, Motta FA. Recognition of the Hyperodapedon Assemblage Zone (Late Triassic) in a relictual occurrence over the Sul-Rio-grandense Shield. Revista Brasileira de Paleontologia. 2015;18(1):91–96.

50. Da-Rosa AAS, Leal LA. New elements of an armored archosaur from the Middle to Upper Triassic, Santa Maria Formation, south of Brazil. Arquivos do Museu Nacional. 2002;60(3):149–154.

51. Brust ACB. Descrição anatômica e análise sistemática preliminar de um aetossauro da FormaçãoSanta Maria (Membro Alemoa, Zona de Assembleia Hyperodapedon), Triássico Superior do Sul do Brasil. Undergraduate thesis. Brazil: Federal University of Santa Maria, Santa Maria. 2014. Portuguese.

52. Hendrickx C, Mateus O, Araújo R. A proposed terminology of Theropod teeth (Dinosauria, Saurischia). J Vertebr Paleontol. 2015;35(5).

53. Brochu CA. Closure of neurocentral sutures during crocodilian ontogeny: implications for maturity assessment in fossil archosaurs. J Vertebr Paleontol. 1996;16(1):49–62.

54. Irmis RB. Axial skeleton ontogeny in the Parasuchia (Archosauria: Pseudosuchia) and its implications for ontogenetic determination in archosaurs. J Vertebr Paleontol. 2007;27(2):350–361.

55. Taborda JRA, Heckert AB, Desojo JB. Intraspecific variation in Aetosauroides scagliai Casamiquela (Archosauria: Aetosauria) from the Upper Triassic of Argentina and Brazil: an example of sexual dimorphism? Ameghiniana. 2015;52(2):173–187.

56. Bailleul AM, Horner Jr. Comparative histology of some craniofacial sutures and skull-base synchondroses in non-avian dinosaurs and their extant phylogenetic bracket. J Anat. 2016;229:252–285. pmid:27111332

57. Parker WG. A new species of the Late Triassic aetosaur Desmatosuchus (Archosauria:Pseudosuchia). Compte Rendus Paleovol. 2005;4(4):327–340.

58. Schoch RR. Osteology of the small archosaur Aetosaurus from the Upper Triassic of Germany. Neues Jahrb Geol Palaontol Abh. 2007;246(1):1–35.

59. Sulej T. The skull of an early Late Triassic aetosaur and the evolution of the stagonolepidid archosaurian reptiles. Zool J Linn Soc. 2010;158(4):860–881.

60. Parker WG. Revised phylogenetic analysis of the Aetosauria (Archosauria: Pseudosuchia); assessing the effects of incongruent morphological character sets. PeerJ. 2016;4:e1583. pmid:26819845

61. Chatterjee S. Postosuchus, a new Thecodontian reptile from the Triassic of Texas and the origin of Tyrannosaurs. Philosophical transactions. 1985;309(1139):395–460.

62. Hunt AP. A new ?ornithischian dinosaur from the Bull Canyon Formation (Upper Triassic) of east-central New Mexico. In: Lucas SG, Hunt AP, eds. Dawn of the Age of Dinosaurs in the American Southwest. 1989;355–358.

63. Brusatte SL, Benton MJ, Desojo JB, Langer MC. The higher-level phylogeny of Archosauria (Tetrapoda: Diapsida). J Syst Palaeontol. 2010;8:3–47.

64. Goloboff P, Farris J, Nixon K. TNT, a free program for phylogenetic analysis. Cladistics. 2008;24:774–786.

65. Coddington J, Scharff N. Problems with zero-length branches. Cladistics. 1994;10(4):415–423.

66. Pol D, Escapa IH. Unstable taxa in cladistic analysis: identification and the assessment of relevant characters. Cladistics. 2009;25:1–13.

67. Nesbitt SJ. The early evolution of archosaurs: Relationships and the origin of major clades. Bull Am Mus Nat Hist. 2011;352:1–292.

68. Heckert AB, Schneider VP, Fraser NC, Webb RA. A new aetosaur (Archosauria: Suchia) from the Upper Triassic Pekin Formation, Deep River Basin, North Carolina, U.S.A., and its implications for early aetosaur evolution. J Vertebr Paleontol. 2015;35(1):e881831.

69. Parrish JM. Cranial osteology of Longosuchus meadei and the phylogeny and distribution of the Aetosauria. J Vertebr Paleontol. 1994;14:196–209.

70. Romer AS. Osteology of Reptiles. Chicago: University of Chicago Press. 1956.

71. Cerda IA, Desojo JB. Dermal armour histology of aetosaurs (Archosauria: Pseudosuchia), from the Upper Triassic of Argentina and Brazil. Lethaia. 2011;44(4):417–428.

72. Heckert AB, Fraser NC, Schneider VP. A new species of Coahomasuchus (Archosauria, Aetosauria) from the Upper Triassic Pekin Formation, Deep River Basin, North Carolina. J Paleontol. 2017; 91(1):162–178.