It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
The formation of local high temperature regions, or so-called “hot spots”, in heterogeneous reaction systems has been suggested as a critical factor in the enhancement of chemical reactions using microwave heating. In this paper, we report the generation of local high temperature regions between catalyst particles under microwave heating. First, we demonstrated that reaction rate of the dehydrogenation of 2-propanol over a magnetite catalyst was enhanced 17- (250 °C) to 38- (200 °C) fold when heated with microwave irradiation rather than an electrical furnace. Subsequently, the existence of microwave-generated specific local heating was demonstrated using a coupled simulation of the electromagnetic fields and heat transfer as well as in situ emission spectroscopy. Specific high-temperature regions were generated at the vicinal contact points of the catalyst particles due to the concentrated microwave electric field. We also directly observed local high temperature regions at the contact points of the particles during microwave heating of a model silicon carbide spherical material using in situ emission spectroscopy. We conclude that the generation of local heating at the contact points between the catalyst particles is a key factor for enhancing fixed-bed flow reactions under microwave irradiation.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details


1 School of Materials and Chemical Technology, Tokyo Institute of Technology, Department of Chemical Science and Engineering, Meguro-ku, Japan (GRID:grid.32197.3e) (ISNI:0000 0001 2179 2105)
2 The University of Tokyo, Research Center for Advanced Science and Technology, Meguro-ku, Japan (GRID:grid.26999.3d) (ISNI:0000 0001 2151 536X)
3 School of Materials and Chemical Technology, Tokyo Institute of Technology, Department of Chemical Science and Engineering, Meguro-ku, Japan (GRID:grid.32197.3e) (ISNI:0000 0001 2179 2105); Okinawa National College of Technology, Department of Information and Communication Systems Engineering, Nago-shi, Japan (GRID:grid.471922.b) (ISNI:0000 0004 4672 6261)
4 Graduate School of Engineering, Tohoku University, Department of Applied Chemistry, Sendai, Japan (GRID:grid.69566.3a) (ISNI:0000 0001 2248 6943)