Flow and detailed 3D morphodynamic data from laboratory experiments of fluvial dike breaching

Abstract

This paper presents a dataset obtained from fifty four laboratory experiments of the breaching of fluvial dikes due to flow overtopping. Data were collected on two complementary experimental setups, each consisting of a main channel representing the river, an erodible lateral dike and a floodplain. The dataset covers seven test series, involving varying hydraulic boundary conditions (e.g. inflow discharge, downstream boundary conditions), main channel dimensions, as well as bottom and dike material. The following experimental data were produced: time series of water levels in the main channel, time series of flow discharges in the main channel and through the breach, as well as high resolution 3D reconstructions of the breach geometry during its expansion. The latter measurements were performed using a novel non-intrusive laser profilometry technique developed for this research. Reuse of the collected data will support efforts to improve our understanding of the physical processes underpinning fluvial dike breaching. It will also enable benchmarking the accuracy of conceptual or detailed numerical models for the prediction of dike breaching, which is central to flood risk management.

Design Type(s)	modeling and simulation objective • factorial design
Measurement Type(s)	levee
Technology Type(s)	Modeling_and_Simulation
Factor Type(s)	Regulator Device • fluid flow rate • Dimension
Sample Characteristic(s)	laboratory environment

Machine-accessible metadata file describing the reported data (ISA-Tab format)