Respiratory health and inflammatory markers - Exposure to respirable dust and quartz and chemical binders in Swedish iron foundries

Abstract

Purpose

To study the relationship between respirable dust, quartz and chemical binders in Swedish iron foundries and respiratory symptoms, lung function (as forced expiratory volume FEV1 and vital capacity FVC), fraction of exhaled nitric oxide (FENO) and levels of club cell secretory protein 16 (CC16) and CRP.

Methods

Personal sampling of respirable dust and quartz was performed for 85 subjects in three Swedish iron foundries. Full shift sampling and examination were performed on the second or third day of a working week after a work free weekend, with additional sampling on the fourth or fifth day. Logistic, linear and mixed model analyses were performed including, gender, age, smoking, infections, sampling day, body mass index (BMI) and chemical binders as covariates.

Results

The adjusted average respirable quartz and dust concentrations were 0.038 and 0.66 mg/m3, respectively. Statistically significant increases in levels of CC16 were associated with exposure to chemical binders (p = 0.05; p = 0.01) in the regression analysis of quartz and respirable dust, respectively. Non-significant exposure-responses were identified for cumulative quartz and the symptoms asthma and breathlessness. For cumulative chemical years, non-significant exposure–response were observed for all but two symptoms. FENO also exhibited a non significant exposure-response for both quartz and respirable dust. No exposure-response was determined for FEV1 or FVC, CRP and respirable dust and quartz.

Conclusions

Our findings suggest that early markers of pulmonary effect, such as increased levels of CC16 and FENO, are more strongly associated with chemical binder exposure than respirable quartz and dust in foundry environments.

About the Authors:

Lena Andersson

Roles Conceptualization, Investigation, Methodology, Validation, Writing – original draft, Writing – review & editing

* E-mail: [email protected]

Affiliations Department of Occupational and Environmental Medicine, Faculty of Medicine and Health, Örebro University, Örebro, Sweden, Department of Medical Sciences, School of Medicine and Health, Örebro University, Örebro, Sweden

ORCID logo http://orcid.org/0000-0001-8166-7955

Ing-Liss Bryngelsson

Roles Conceptualization, Data curation, Formal analysis, Methodology, Software, Validation, Writing – review & editing

Affiliation: Department of Occupational and Environmental Medicine, Faculty of Medicine and Health, Örebro University, Örebro, Sweden

Alexander Hedbrant

Roles Conceptualization, Formal analysis, Investigation, Methodology, Writing – review & editing

Affiliations Department of Medical Sciences, School of Medicine and Health, Örebro University, Örebro, Sweden, Inflammatory Response and Infection Susceptibility Centre (iRiSC), Örebro University, Örebro, Sweden

Alexander Persson

Roles Conceptualization, Investigation, Methodology, Writing – review & editing

Affiliations Department of Medical Sciences, School of Medicine and Health, Örebro University, Örebro, Sweden, Inflammatory Response and Infection Susceptibility Centre (iRiSC), Örebro University, Örebro, Sweden

Anders Johansson

Roles Investigation

Affiliation: Department of Occupational and Environmental Medicine, Faculty of Medicine and Health, Örebro University, Örebro, Sweden

Annette Ericsson

Roles Investigation

Affiliation: Department of Occupational and Environmental Medicine, Faculty of Medicine and Health, Örebro University, Örebro, Sweden

Ina Lindell

Roles Investigation

Affiliation: Department of Occupational and Environmental Medicine, Faculty of Medicine and Health, Örebro University, Örebro, Sweden

Leo Stockfelt

Roles Formal analysis, Methodology, Writing – original draft, Writing – review & editing

Affiliation: Unit of Occupational and Environmental Medicine, Sahlgrenska Academy, University of Gothenburg and Sahlgrenska University Hospital, Gothenburg, Sweden

Eva Särndahl

Roles Conceptualization, Investigation, Methodology, Writing – review & editing

Affiliations Department of Medical Sciences, School of Medicine and Health, Örebro University, Örebro, Sweden, Inflammatory Response and Infection Susceptibility Centre (iRiSC), Örebro University, Örebro, Sweden

Håkan Westberg

Roles Conceptualization, Formal analysis, Methodology, Validation, Writing – original draft, Writing – review & editing

Affiliations Department of Occupational and Environmental Medicine, Faculty of Medicine and Health, Örebro University, Örebro, Sweden, Department of Medical Sciences, School of Medicine and Health, Örebro University, Örebro, Sweden, Inflammatory Response and Infection Susceptibility Centre (iRiSC), Örebro University, Örebro, Sweden

Introduction

Concerns about aerosol exposure in the iron foundry industry have largely been related to respirable quartz (CAS no14080-60-7), primarly because quartz exposure has been linked to increased risks of silicosis [1, 2], lung cancer [3, 4, 5] and cardiovascular disease and mortality [6, 7, 8].

Several studies have examined acute and chronic effects of aerosol exposure in foundry workers, focusing on respiratory symptoms and signs as well as lung function. A study in a small iron foundry in the Arabian Gulf States reported significant increases in the incidence of symptoms such as cough, phlegm and wheezing, non-significant increases in FVC and FEV1, and a significant change in the VC related to respirable dust exposures for exposed workers [9]. An Australian study investigated symptoms and lung function in a steel foundry, and no significant differences in chonic effects between the aftercast jobs and other job types were detected. However, high exposures to furfuryl alcohol and formaldehyde were determined in the general foundry areas [10]. A Finnish study in iron foundries related dusty jobs to an increased prevalence of chronic bronchitis, but not to any impairment of the lung function [11]. Respiratory impairment was investigated in a Brazilian study, in which duration of employment was used as a proxy for exposure. Significant excess of chronic bronchitis was related to duration of employment, but there was no detectable correlation between exposure and FEV1 or FVC [12]. Respiratory abnormalities (deviations from normal values) were investigated in a Taiwanese study [13], and a significantly increased risk for those employed > 10 years was noted. Respiratory symptoms and lung function were investigated in a Turkish study on iron foundries, in which the exposed group exhibited significantly higher incidence of symptoms compared to controls. The group exposed to very high respirable dust levels (10 mg/m3 respirable dust) exhibited no significant increase in FVC and FEV1 compared to the controls, but did exhibit a significant incidence of asthma [14]. In a British study, foundry workers were found to exhibit higher FEV1 and FVC, and a non-significantly higher prevalence of most respiratory symptoms, compared to controls [15]. An Iranian study on foundry core makers revealed statistically significant effects of high levels of silica, formaldehyde and trimethylamine exposure on FVC [16]. In a Swedish study, nitrogen wash out tests revealed impaired lung function among furan binder exposed workers indicating acute restrictiveness (not chronic) at high concentrations of furfuryl alcohol and formaldehyde [17].

In recent years, more sensitive indicators of inflammatory processes in the lung have been used to predict respiratory impairment or diseases. Nitric oxide (FENO), an indicator of primarily eosinophilic inflammation in the respiratory tract [18], produced in the bronchi or alveoli, was investigated in a Finnish study on foundry workers together with other inflammatory and coagulatory markers. A link between dust and quartz exposure was also investigated, revealing a positive association between cumulative dust exposure and FENO [19]. Serum levels of the surfactant protein, known as club cell secretory protein 16 (CC16), a marker of pulmonary inflammation or epithelial damage, has also been used to identify early signs of lung damage due to dust and chemical exposures [20].

We have previously presented exposure–response data for systemic inflammatory markers and exposure to quartz and respirable dust in iron foundries. Participants in the high-exposure groups with respect to some of the measured particle types exhibited significantly elevated levels of serum amyloid a (SAA), fibrinogen and the coagulation factor VIII [21]. Here, we investigate a possible exposure–response relationship between exposures to respirable dust, quartz, and chemical binders on one hand and respiratory symptoms, local and systemic biomarkers of airway effects and lung function on the other.

Methods

Study group

The study was performed at three Swedish iron foundries, one large and two smaller, situated in the middle of Sweden, employing 440, 90 and 25 workers, respectively. The number of day-shift workers at the foundries are 350, 80 and 25, respectively. These foundries produced some 100,000, 25,000 and 2,000 tons of castings per year, respectively. The castings produced are mainly based on iron and gray iron alloys and include products such as motor heads and blocks for trucks, large components for the wind power industry, and large/medium lego castings. The jobs and departments included in the study were sand preparation, core making, moulding, casting, shake out operations, fettling, inspection, and maintenance and repair. Melters, moulders and fettlers represented the majority of the jobs. The sand used for moulding was mostly green sand comprising silicates, quartz, carbon black, bentonite (clay and water) but chemical binders such as furan (furfuryl alcohol, urea, phenol, formaldehyde, p-toluenesulphonic acid or phosphoric acid) and silicate ester (sodium meta silicate and organic ester) were added to the silica sand, particularly in the smaller foundries. All mechanized and manual moulding and casting was performed at the foundries. The most common core binder was epoxy-SO2 and sodium silicate but coldbox (isocyanate-MDI, polyol, phenol formaldehyde) resin with an amine as catalytic agent, was also used as core binders in the foundries [22]. The study’s participants were foundry workers, predominantly from the day shift. In total, 80 men and 5 women participated in the study. Their mean age was 43 years, ranging from 21 to 67, evenly distributed when 10-year age classes were compared. They had worked in the same workplace for 12 years on average, ranging up to 45 years of employment. In total, 83 participants reported their smoking habits, 17 were current smokers, 18 were ex-smokers and 48 were never smokers.

Written informed consent was obtained for all individual participants included in the study. The study was approved by the Regional Ethical Review Board, Uppsala, dnr. 2015/066, including the informed consent procedures.

Study design

The measurements were conducted between March 2015 and September 2016 during 6 separate four-days campaigns. Each campaign involved air sampling of respirable dust and quartz, biological sampling of blood, and investigation of lung function by spirometry and measuring FENO in exhaled air (S1 Fig). Air sampling of respirable dust and quartz was performed on the second or third working day after a work-free weekend. Blood sampling was performed on the same day as the air sampling, starting in the afternoon (3–4.30 p.m.), and was followed up after two days, i.e., on day 4 or 5 at work. Two blood samples were collected for each subject during each campaign. The post shift sampling design was initended to control for circadian variation. On the same day as the air sampling, the participants lung function was studied by spirometry and measuring FENO levels as a marker of inflammation. This was done before and after shifts and was followed up after two days, i.e., on day 4 or 5 at work. All participants completed a questionnaire, containing items relating to their current and previous working conditions, height and weight, smoking habits, medication, and symptoms of respiratory irritation, infection or other inflammation, which could influence the measured biomarker levels and respiratory outcomes. All participants were at work during our investigation. Seven workers reported suffering from chronic diseases such as thyroid imbalance, diabetes type 2, scoliosis, hypertension, depression, asthma or chronic obstructive pulmonary disease (COPD).

Aerosol measurements and quartz analysis

The respiratory tract comprises three regions, the extrathoracic (which includes the nose and throat), tracheobronchial and alveolar regions. Aerosols reaching the alveolar region are sampled as respirable dust. The exposure data presented here are in principal based on exposure measurements of respirable dust and quartz, used in our exposure-response analysis. The measurements were performed on the second or third day after a work-free weekend, on the day the when first blood sample was taken for the individual in question. Personal sampling of respirable dust was performed by collecting 8-hour full shift samples according to standards for measurement of respirable dust using SKC HD aluminium cyclones for 25 mm filters, operating at an air flow of 2.5 L/min [23]. SKC AircheckXR5000, and GSA SG 5100 personal sampling pumps were used in the study. Respirable crystalline quartz was determined by X-ray diffraction [24].

Measuring rigs were used for stationary measurements (area measurements), in particular to determine background air concentrations. These measurements were peformed in the various departments where the workers were present during their shifts, and included sampling of inhalable dust as well as respirable dust and quartz using the same techniques as for the personal samples.

Marker of inflammation, CC16, CRP

The blood samples were centrifuged and stored at -70 oC at the biobank (Dnr 13OLL718-5). High-sensitivity CRP was determined at the Clinical Research Center, Örebro University Hospital, Sweden. CC16 in serum was analyzed using a commercial ELISA-kit from R&D Systems (Minneapolis, United States) in-house at the Department of Occupational and Environmental Medicine, Sahlgrenska University Hospital, Göteborg.

Lung function and nitric oxide in exhaled air (FENO)

Lung function was assessed using spirare, a hand-held PC-based spirometry flow sensor with bi-directional ultrasound transit time analysis (Diagnostica, Oslo, Norway), according to guidelines from the American Thoracic Society [25]. The spirometry was performed on the same day as the personal air sampling, before and after shift, and was followed up after two days, i.e., on day 4 or 5 at work. The results were expressed in terms of the percentage of predicted forced vital capacity (FVC) and forced expiratory volume in one second (FEV1), determined using gender-specific Swedish reference data, adjusting for age and body weight [26, 27].

FENO, an indicator of primarily eosinophilic inflammation in the respiratory tract [18], was investigated using a NIOX Mino apparatus (Aerocrine AB, Solna, Sweden) with an exhaled flow rate of 50 ml/s during measurement [28]. The measurements were performed in connection to the spirometry. Information on factors (smoking, infections, food) that may affect the FENO concentrations was collected from each subject. The results were expressed as the fraction of exhaled FENO in parts per billion (ppb).

Exposure measures

Exposure was primarly determined and presented as 8 hr-time weighted averages (TWA, mg/m3) of respirable dust and quartz based on exposure measurements relating to acute effects. The respirable fraction served as a proxy for other dust fractions, i.e., inhalable dust. In our stationary measurement inhalable and respirable dust correlated. The stationary measurements served as proxies for the additional exposure measures and were performed in each department, where individuals with the studied job titles worked. Participants working in high exposure jobs wore respirators (particularly shake-out and fettling operations). The personal measurements for the 28 subjects using respirators were adjusted to account for the use of respirator, reflecting their true exposures. To adjust for respirator use, exposure was assumed to be zero while wearing mask and to be equal to the corresponding background air concentrations for the rest of the shift, giving an 8 hr-time weighted average (TWA) exposure for the shift [21]. As a sensitivity analysis, we also performed our regression analysis assuming no protection effect of the respirators for both respirable quartz and dust.

Exposures were also determined and presented as cumulative (mg/m3.year) or mean (mg/m3) respirable quartz and dust exposure. We used data from a mixed model analysis of quartz air concentrations to calculate cumulative quartz exposure measures based on extracted measurement data from our iron foundry database [29] and data on dust and quartz from 2006 to 2016 for the three studied foundries to specifically model exposures at those three foundries. In this way, respirable quartz and dust exposures were determined (as concentrations) for different 10 year time periods in our three foundries, and for the job titles caster, core maker, fettler, furnace and ladle repair, maintenance, melter, moulder, sand mixer, shake out operator and transporter.

Exposures to chemical agents affecting the airways, i.e., the furan binder, were also accounted for in the analysis [17, 30]. The use of furan binder is known to generate emission of furfurylalcohol and formaldehyde in foundries. We used both cross-shift and cumulative exposure measures in this adjustment, chemical exposure (high exposure group; moulders, casters) (low exposure group: all other jobs) current exposure (8-hour TWA) to reflect current exposure and chemical exposure years (high exposure group: years of employment as a moulder or caster, (low exposure group: all other jobs) was used to reflect chronic effects and cumulative exposure.

Statistical analysis

For descriptive purposes, the aerosol concentrations of respirable dust and quartz are presented by job title as 8-hour TWAs for a full workday (TWA). The reported results are adjusted for the use of respirators. Standard parameters such as the arithmetic mean (AM), standard deviation (SD), geometric mean (GM) geometric standard deviation (GSD) and range were calculated based on the log-normal distribution of all measurements (Tables 1 and 2).

[Figure omitted. See PDF.]

Table 1. Exposure concentration levels of respirable quartz by job title, adjusted for the use of respirators.

https://doi.org/10.1371/journal.pone.0224668.t001

[Figure omitted. See PDF.]

Table 2. Prevalence of mucous membrane and respiratory symptoms in foundry workers, percentage of answers (missing cases in parenthesis).

https://doi.org/10.1371/journal.pone.0224668.t002

We also modelled respirable quartz and dust for the whole exposure period for all workers, basically by adding measurement data from 2005 to 2016 to our earlier mixed model analysis derived for some Swedish iron foundries, including those studied here [31]. The fixed effects were time period, type of foundry, and job title. The estimates from this model allowed us to identify factors affecting quartz concentration levels and to use these to calculate cumulative respirable quartz and dust exposures for each individual in our study. Adjustments to the measured exposure to chemical binders, i.e., furfuryl alcohol and formaldehyde were made on the basis of high and low exposure groups. These assessments compared high and low exposure groups using furfuryl alcohol and formaldehyde exposure measurements as proxies [17, 30].

Logistic regression analysis was used to evaluate exposure-responses for respirable quartz and dust, symptoms and signs. The determinants were age (>45; <45 years); gender (male, female); respirable dust (<0.1, 0.11–0.99, >1.0 mg/m3); respirable quartz (<0.01, 0.011–0.05; >0.05 mg/m3), cumulative respirable quartz (<0.1, 0.11–0.99; >1.0 mg/m3 years); cumulative respirable dust (<1.99, 2–9.99, >10 mg/m3 years); smoking habits (non-smoker, ex-smoker, smoker), chemical exposure (moulder, caster vs other jobs) based on current exposure (8-hour TWAs), and chemical exposure years (years as a moulder or caster vs. other jobs) based on chronic cumulative exposure. Separate analyses were performed for each measure of particle- and chemical binder exposure. Symptoms with less than 5 positive findings were omitted in the regression analysis. Multiple linear regression was used to study the chronic effects of cumulative exposure to respirable dust and quartz on FEV1, FVC, FENO, CC16 and CRP. The determinants for FEV1 and FVC were respirable dust (<1.99, 2–9.99, >10 mg/m3 years); respirable quartz (<0.1, 0.11–0.99; >1.0 mg/m3 years); smoking habits (non-smoker, ex-smoker, smoker); chemical exposure years (years as a moulder or caster vs other jobs) as a measure of chronic, cumulative exposures; and BMI (body mass index). For FENO and CC16 analysis, age (<45, >45 years), infection and gender (male, female) were also included as determinants.

A linear mixed model was used to describe the relationship between respirable quartz and dust exposure and FEV1, FVC, FENO, CRP and CC16 based on morning and afternoon sampling, with repeated afternoon sampling 2 days after the initial sample collection. Our design and the use of a mixed model made it possible to consider within and between worker variability based on our repeated measurements of CC16 and CRP. The exposure measurements were converted into 8-hour TWA levels for respirable dust (<0.1, 0.11–0.99, >1.0 mg/m3), respirable quartz (<0.01, 0.011–0.05; >0.05 mg/m3), cumulative respirable dust (<1.99, 2–9.99, >10 mg/m3 years), and cumulative respirable quartz (<0.1, 0.11–0.99; >1.0 mg/m3 years). In addition, sampling day (time), gender (male, female), BMI, smoking habits (never smoker, ex smoker, current smoker), age (< 45 years, >45 years), chemyears (cumulative exposure), chemexp (TWA), and infection were included. The output of the mixed model analysis is reported in terms of B values and 95% confidence intervals. To evaluate statistical significance, we used a significance threshold of p < 0.05.

All analyses were performed with SPSS version 22.0. Details of the regression and mixed model analysis are presented in S1 Appendix.

Results

Exposure

The mean 8-hour TWA for respirable quartz determined by personal sampling of the 85 participants was 0.052 mg/m3, with individual TWAs ranging from 0.0010 to 0.61 mg/m3. For respirable dust, the corresponding mean and range were 0.85 mg/m3 and 0.060 to 9.7 mg/m3 (not shown in table). For the personal measurements and for the 28 individuals using respirators, we calculated adjusted exposure concentrations based on non-adjusted, average, and background-adjusted respirable dust and respirable quartz concentrations. The adjusted average respirable quartz and dust concentrations were 0.038 and 0.66 mg/m3, respectively (Table 1). The highest adjusted quartz exposures were determined in the core making, shake out, and fettling departments, for which the mean adjusted exposures were 0.065, 0.080, and 0.077 mg/m3, respectively.

Symptoms and lung function

Several mucous membrane and respiratory symptoms exhibited high (> 15%) prevalence among participants, including a dripping or blocked nose for > 1 month (18.8%), dripping or blocked nose in the last two weeks (41.2%), coughing fits with no associated infection (18.8%), coughing fits with phlegm (25.9%), and blocked nose for > 1 month (18.8%) (Table 2).

A logistic regression analysis revealed no significant exposure-response between symptoms and cumulative respirable quartz exposure adjusted for age, smoking, gender and chemical years (Table 3). However, non-significant exposure-responses were identified for most symptoms when comparing the high and low exposure groups.

[Figure omitted. See PDF.]

Table 3. Symptoms and exposure to cumulative respirable quartz (mg/m3 year) and chemical binders (chem years)—logistic regression analysis presented as odds ratios adjusted for age, smoking and gender.

https://doi.org/10.1371/journal.pone.0224668.t003

A corresponding analysis of symptoms, cumulative respirable dust and chemical years exposure revealed a similar pattern, although a statistically significant increase in the odds ratio for chemical years and nose dripping was determined (OR 1.12; p = 0.05 (Table 4). Additionally, a non-significant exposure response was determined for both respirable dust and quartz exposure with respect to asthma and breathlessness. No significant exposure response was determined for any symptom with respect to daily TWA exposure to quartz and chemical exposure (measured over complete shifts, data not in table). However, non-significant increases in the incidence of wheezing (OR 2.28), nose problems (OR 2.89), and cough (OR 3.38) were determined for chemical exposure. The corresponding analysis of respirable dust and chemical exposures revealed a non-significant exposure response for nose irritation for respirable dust (ORs 1, 1.02 and 2.93, respectively). Wheezing (OR 1.73), nose irritation (OR 3.17) and cough showed the same pattern for exposure to chemical binders.

[Figure omitted. See PDF.]

Table 4. Symptoms and exposure to cumulative respirable dust exposures (mg/m3 year) and chemical binders (chem years)—logistic regression analysis presented as odds ratios adjusted for age, smoking and gender.

https://doi.org/10.1371/journal.pone.0224668.t004

The average lung function measurements—vital capacity (FVC) and expiratory volume (FEV1)—for the three different samples were low, ranging from 86.9 to 89.6% of expected levels in the Swedish population (Table 5). Additionally, the variation within and between individuals was high: 53.9 to 124.0% of the expected value for FVC, and 56.1 to 127.5% for FEV1. Notably, FEV1 and FVC declined over the course of a shift, by 0.5 and 0.6%, respectively.

[Figure omitted. See PDF.]

Table 5. Lung function FVC, FEV1 as percentage of expected values, FENO and CC16.

https://doi.org/10.1371/journal.pone.0224668.t005

No statistically significant exposure response was observed for a chronic effect of FEV1 and FVC related to cumulative respirable quartz and dust exposure. In fact, lung function increased slightly with exposure (Table 6). For FENO, the average levels were low (16 to 16.7 ppb), although some measurements were above 50 ppb. Linear regression models revealed non-significant increases in FENO levels related to respirable quartz and dust exposure; these increases were as high as 6.28 ppb per >1.0 mg/m3 year respirable quartz and 4.91 per >10 mg/m3 year respirable dust (Table 6).

[Figure omitted. See PDF.]

Table 6. FEV1 and FVC (% of expected), FENO, CC16 and CRP morning day 1, cumulative exposure to respirable quartz, respirable dust (mg/m3 year) and chemical binders (chem years)–multiple linear regression adjusted for smoking, BMI, age and gender.

https://doi.org/10.1371/journal.pone.0224668.t006

CC16, CRP

A comparison of high and low exposure groups revealed statistically significant exposure responses linking elevated CC16 levels to long-term exposure (expressed in terms of chemical exposure years) to chemical binders (i.e. furfuryl alcohol and formaldehyde). The B-values for this relationship determined by treating respirable dust and quartz exposure as fixed effects were B = 0.39 (p = 0.01) and B = 0.31 (p = 0.053), respectively (Table 6). These B-values indicate a 30 to 40% increase in the contribution of chemical binders to the model. Upon segmenting binder-exposed group based on duration of exposure (1–5, 6–10 and 10+ years), it was found that the group with the longest exposure duration exhibited significantly elevated mean (26 vs. 22 μg/L) and median (23 vs 21 μ/L) CC16 levels. This trend was also observed in the corresponding linear regression analysis using cumulative quartz and chemical binder exposure measurements (B = 4.0 vs 0, non-significant, data not in table). Our sensitivity analysis regarding acute effects, assuming no effect of respirators, showed no difference in the logistic regression analysis, i.e., the effect of respirable quarts and dust on symptoms and irritative effects were the similar to our analysis with adjusted exposures. When analyzing the CC16 levels for the afternoon samples collected on days 1 and 3 using a mixed model analysis, a statistically significant exposure-response was identified upon comparing the high and low exposure groups (groups defined based on long-term exposure in chemical years; β = 0.408; p = 0.012, data not in table). The corresponding analysis of chemical exposure (cross-shift exposure) revealed no significant exposure-response. These data suggest an exposure-response for chemical binders based on cumulative exposure years. No exposure–response was determined for CRP, a marker of systemic inflammation, when analyzed for cumulative respirable quartz, respirable dust and chemical years (Table 6). Similar results was found when current exposure to respirable quartz, respirable dust and chemical exposure (TWA) were evaluated (data not in table).

Discussion

Main findings

The main finding of our study is an association between CC16 levels and long-term chemical exposure (expressed in chemical years) to binders, i.e., furfuryl alcohol and formaldehyde. Additionally, FENO levels increased over full shifts and exhibited non-significant exposure responses to quartz and respirable dust. Non-significant positive exposure responses to cumulative respirable quartz exposure were determined for the symptoms asthma and breathlessness, and to chemical years (cumulative exposures) for all but two symptoms. Non-significant exposure responses to daily quartz and chemical exposure (based on daily TWAs) were determined for the symptoms wheezing, nose problems and cough.

To our knowledge, this is one of the first reported study to examine the effects of respirable quartz, respirable dust and chemical agent exposure on respiratory symptoms and effects, markers of early inflammatory processes in the lung (FENO and CC16) in foundry environments. A key strength of this study is the determination of multiple quantitative exposure measures, including average daily levels and cumulative exposure measures for respirable quartz and dust as well as qualitative exposure to chemical binders (i.e., furfuryl alcohol and formaldehyde). We were also able to incorporate exposure data from 2005 to 2015 for the foundries examined in this work, thereby completing our original database [29]. Although our personal aerosol sampling include only respirable fractions active in the small airways, a number of particle mass based measures were sampled (data not presented). Additional stationary sampling showed good statistically significant correlation between inhalable and respirable dust (r = 0.872, p<0.01), implying the use of the respirable fractions as a marker of inhalable dust. The blood sampling for CC16 was designed to avoid the influence of diurnal variation; sampling was performed at the end of a shift to facilitate comparisons based on temporal trends and other determinants [32]. In the design phase of the study, we excluded the use of a totally non-exposed reference group because the use of such a group could introduce socioeconomic bias. Instead, we relied on between-group (exposure classes) comparisons using exposure-response analyses for respirable quartz and dust. We also treated exposure to chemical binders (i.e., furfuryl alcohol and formaldehyde) as a binary variable (high/low exposed). In our exposure measurements, moulders and casters were treated as the high exposure group and were compared to foundry employees with other jobs. No measurements of furfuryl alcohol or formaldehyde were performed in our study; the exposure assessment was based on historical exposure measurements and the concept of similar exposure groups [17, 31, 33]. For the studied responses (lung function, symptoms, CC16, CRP and FENO), current exposure responses were analyzed over full shifts and long-term effects were analyzed based on morning samples and full shift exposure, together with cumulative exposures from our company-specific measurement database.

Particle sampling and analysis and blood sampling were performed using standard methods at accredited laboratories. The overall respirable quartz concentration measurements and those for specific job titles at the three foundries are consistent with previous reports [34].

Some 30% of the participating workers used respirators during some parts of their shifts (determined individually for each worker). For these workers, we calculated individual exposure measures based on the amount of time spent wearing a respirator; their exposure was assumed to be zero during this time, and to be equal to the background exposure for the relevant department during the remainder of their shift [21]. We consider this correction strategy to be the most reliable of those available.

Our study design is cross-sectional with respect to the medical investigations, but many of the respiratory symptoms and signs as well as lung function could be due to long term exposure. Our exposure data allowed us to determine average intensities (cross-shift exposure measures) as well as cumulative exposure measures expressed as mg/m3 years. In most cross–sectional studies, the exposure is only measured cross-shift and long–term exposure only estimated by duration of exposures (year). However, all workers entering the iron foundry environment passes mandatory health examinations when entering work as well as every third year for the high exposed workers, focusing on lung diseases related to quartz exposure. The test includes x-ray, questionnaires and lung function controls, revealing lung diseases, and preventing workers with disease to enter the iron foundry environment. There is a risk that our results may be biased by the healthy worker effect [35], i.e. that we may have analyzed only very healthy individuals. However, our spirometric lung function assessments did not reveal any extremely healthy workers; mean preshift FVC and FEV1 measurements ranged from 87.5 to 89.6% of the expected values [27]. Our finding would then represent exposure to quartz for workers passing health examinations and not the general population, implying considerations when a study like ours will be used for setting occupational exposure limits. We did not collect data on atopy, but consider that it is unlikely that atopic status is correlated with the exposure-response analyses in this study.

CC16

Club cell protein 16 is a small protein secreted by bronchiolar club cells into the epithelial lining fluid of the lungs and is believed to protect against inflammation and oxidative stress. A small fraction normally passes through lung epithelial barrier into serum, where increased levels can be used as an early marker of lung injury [36]. In addition to increased leakage, serum CC16 levels may increase due to elevated expression in the respiratory tract during inflammation or decreased renal clearance [37]. Serum CC16 levels generally fall after chronic particle exposure (such as that resulting from tobacco smoking) due to the destruction of club cells; they generally rise after current exposure and in lung disorders that increase airway permeability [37, 38]. Studies have examined the response of CC16 serum levels to various exposures and in diverse populations, including garbage and waste water aerosols [39], asphalt workers [20] grain dust workers [40], wood smoke [41, 42], smoke [43, 44], ozone [45], chlorine [46] and outdoor air pollution particles [47]. In most cases, serum CC16 levels increased upon exposure to particles or chemical agents. However, decreased levels were observed among ski waxers after exposure [48] sewage workers [49] and diesel exhaust exposed workers [50], and offshore oil drill workers [51]. We observed no short term differences in serum CC16 between post-shift samples collected on day 1 and day 3, so our results provide no evidence that occupational exposure has short-term effects. The half life of CC16 in serum is short (hours), however, so it is possible that our sampling at the end of the shift missed transient effects of exposure in the earlier part of the shifts. Additionally, there was no association with long-term exposure to respirable quartz or dust. Long-term exposure to chemical binders (furfuryl alcohol and formaldehyde) was, somewhat surprisingly, associated with increased levels of serum CC16. This may be because the binder exposure levels observed in this work did not affect airways strongly enough to cause club cell destruction. The increase in CC16 levels could be due to the chronic airway effects of chemical binder exposure, which may increase epithelial permeability and induce CC16 upregulation as an anti-inflammatory response to airway irritants. Our findings were supported by an additional exposure response analysis that revealed a non-significantly increased inflammatory response among highly exposed groups. To our knowledge, no data on the relationship between CC16 levels and foundry work or chemical binder exposure have been presented previously. However, as described above, increased CC16 levels due to acute and chronic exposure have been reported in other occupationally exposed groups [39, 40, 49].

CRP

CRP was analyzed as a marker of systemic inflammation to contrast our marker of local airway inflammation, CC16. We could not detect any exposure-response for CRP when respirable quartz, respirable dust and chemical binders was evaluated in the regression or mixed model analysis. This results were in line with findings in our previuos study on systemic inflammation in iron foundry workers [21]. However, a study in Finnish foundries analysed pulmonary inflammation using exhaled breath condensate, determining FENO and CRP (CC16 excluded). They found significant differences for NO and CRP levels when the high or low exposure groups of respirable quartz and dust were compared to controls, the CRP increased from 0.77 to 0.92 and 1.06 mg/L, respectively [19]. Our CRP mean concentration was 1.8 mg/L. The exposure-reponse in the Finnish study was based on cumulative exposures for respirable quartz and dust presented as unexposed, low (<2.5 mg/m3 years) and high (>2.5 mg/m3 years) exposure groups. The cumulative high exposure group in the Finnish study is twice as high as ours, which might explain the differences in CRP response between our studies. A Chinese occupational cohort of diesel exhaust exposed workers and an unexposed control group, presented decreased CC16 and increased CRP (CRP for exposed vs controls 0.91 vs 0.47 mg/L) [50]. FEV1 was also significantly increased in the control group. Furthermore, a Norwegian study on sewage plant and sewer net workers showed increased levels of CRP (ref 1.4, sew plant 1.9, sew net 3 mg/L) when compared to a control group [49]. In contrast, studies on exposure to grain dust [40] and tunnel construction workers [52] could not present any statistically significant effect on CRP.

Symptoms

Asthma.

The foundry environment and the use of furan binders in particular were listed as irritants causing asthma and/or COPD in a recent review [53]. While this statement was based solely on a case report, impaired lung function has also been reported for foundry workers using furan binders [17]. Our data suggest a non-significant exposure response-relationship for exposure to chemical binders, respirable quartz and diagnosed asthma. For asthma, very high odds ratios for the high exposure group was determined.

Chronic bronchitis.

In a Finnish study, iron foundry workers were separated into high (> 0.2 mg/m3), intermediate (0.1 mg/m3), and low (<0.1 mg/m3) exposure groups based on respirable quartz levels. In this population, 7% reported cough, 5% phlegm, and 2% chronic bronchitis. No exposure response was determined [11]. In a Taiwanese study of foundry workers, the incidences of chronic cough, chronic phlegm, and bronchitis ranged from 5 to 8%, 10 to 17%, and 2 to 10%, respectively, at average respirable dust concentrations of 1.9 to 2.8 mg/m3 for highly exposed workers [13]. No statistically significant differences were observed when comparing the exposed to a control group of administrative personnel. A Brazilian publication focusing predominantly on iron foundries reported an overall chronic bronchitis prevalence of 10% with a significant increase in incidence among workers with a job duration of 10–16 years; job years was used as a proxy for exposure. No exposure response was established [12]. A Canadian study on iron foundry workers (using railway workers as a control group) detected an elevated prevalence of cough, phlegm and chronic bronchitis, although none were statistically significant. The mean respirable dust exposure among the foundry workers was 1.26 mg/m3 [15]. A similar study from the Arabian Gulf States reported prevalences of cough and phlegm of 38 and 25%, respectively, at very high respirable dust concentrations: the average levels for the low, medium, and high exposure groups were 0.26, 5.31 and 21 mg/m3, respectively [9].

Among the never smokers participating in our study, the prevalences of chronic cough, chronic phlegm, and bronchitis were 15%, 25%, and 22%, respectively. We found no exposure response between chronic bronchitis and exposure to quartz (based on a cumulative respirable quartz level of 1.0 mg/m3 years, corresponding to an exposure of 0.1 mg/m3 for 10 years). The other studies discussed above reported much higher respirable quartz and dust concentrations but did not report any exposure-response analysis. However, in our study we found increased odds ratios for most symptoms when high and low culumative exposure to chemical binders was analysed, suggesting respiratory symptoms related rather to chemical binder exposure than to respirabel dust and quartz.

Lung function, dust and quartz

In the Finnish study cited above [11], dust exposure itself did not affect FEV1 or FVC; if anything, both quantities were higher at high dust concentrations. Selective turnover of workers from dusty to less dusty jobs was proposed as an explanation for this observation. In the Taiwanese study, the FEV1 and FVC values for workers exposed to rather high average respirable dust concentrations ranging from 1.9 to 2.8 mg/m3 did not differ significantly from those for a control group [13].

A Brazilian study used duration of exposure as a proxy when evaluating FEV1 and VC by logistic regression analysis. No significant exposure response was detected; in this case, the duration of exposure for the high exposure group was > 16 years [12].

In the Canadian iron and steel foundry, exposed workers exhibited statistically significant changes when comparing to the control group. Using duration of exposure as a proxy, however, no exposure response was determined at mean respirable dust concentrations of 1.26 mg/m3 [15]. In the study on foundry workers in the Arabian Gulf states, a comparison of the exposed and control groups revealed significant changes for FEV1 but not for FVC. Job type significantly affected FVC but not FEV1, and multivariate analysis indicated an inversely significant exposure response, i.e., lung function improved (in terms of FVC) as exposure increased. However, there was no detectable exposure response in terms of FEV1 when participants were divided into dust exposure classes, even though the average respirable dust exposure of the high exposure group was 21 mg/m3 [9]. The only study presenting cross-shift changes of FEV1 and FVC showed decreased FEV1 (6.4%) and FVC (4.0%) cross-shift at very high respirable quartz air concentrations, on average 0.25 mg/m3 [9]. The smaller decreases in our study, 0.5 and 0.6% respectively, could be explained by lower respirable quartz levels, on average 0.038 mg/m3.

Our findings are consistent with those of studies examining participants exposed to much higher respirable dust and quartz levels than the workers at the studied foundries. Notably, this is even the case for the (non-significant) inverse exposure response for respirable quartz and dust that was detected in the analysis of the quantitative data. The absence of an effect on lung function among our high cumulative exposure groups (inclusion criteria: 1 mg /m3 year for respirable quartz, corresponding to 0.1 mg/m3 exposure over 10 years, and 10 mg/m3 year for respirable dust, corresponding to 1 mg/m3 exposure for 10 years) is reasonable given the observation of similar absences for groups exposed to much higher levels of respirable quartz and dust.

Furan binder(chemical years and chemical exposure)

Non-significant reductions in FEV1 (B = -0.21; p = 0.33) and FVC (B = -0.26; p = 0.22) were observed in relation to chemical years when analyzing the fixed effect of respirable quartz exposure, and a similar pattern was observed for respirable dust. This suggests an effect of furfuryl alcohol and formaldehyde for highly exposed workers (moulders, casters) that is stronger than that experienced by shake out and fettling workers. In a Swedish study [17], the TWA values for furfuryl alcohol ranged from 4 to 15 mg/m3, with short-term exposure levels reaching 100 mg/m3. In the same work, respirable dust concentrations ranged from 0.5 to 2 mg/m3, and respirable quartz from 0.01 to 0.11 mg/m3. The exposed group exhibited significant declines in FVC and FEV1 (i.e., a negative exposure response) over a full shift when compared to controls. However, analysis of morning spirometry data revealed no evidence of any effect of chronic exposure. In our study, both high and low exposure groups exhibited non-significant declines in both FEV1 and FVC relating to chemical exposure years (i.e., cumulative exposure to chemical binders and thus to furfuryl alcohol and formaldehyde).

FENO

A Finnish study (earlier discussed regarding CRP levels) on pulmonary inflammation among foundry workers presented cumulative exposures to total dust and respirable dust and an exposure response analysis based on high and low dust exposure groups (>53 mg/m3 year and <53 mg/m3 year, respectively) and high and low cumulative quartz exposure groups (>2.5 mg/m3 year and < 2.5 mg/m3 year, respectively) [19]. No statistically significant exposure-response was determined, but a trend was noted when the high and low exposed were compared to the controls. The high or low exposed compared to the unexposed groups differed significantly in FeNO levels, however no exposure response could be determined [19]. These data are consistent with our observation of a non-significant positive response to respirable quartz and dust exposure for both FEV1 and FVC.

To summarize the published data on respiratory symptoms, lung function and respirable quartz and dust, several studies have reported differences between exposed and control groups, but many of the respiratory symptoms as well as changes in lung function could be due to much higher levels of respirable quartz and dust than the foundry employees studied in this work were exposed to. The cumulative respirable quartz exposure for the highly exposed group in our analysis was > 1 mg/m3 year, corresponding to 0.1 mg/m3 for 10 years, while the cumulative respirable dust exposure for this group was 10 mg/m3 year, corresponding to 1 mg/m3 for 10 years. Hence, there is a risk that our results indicate that the exposure levels and durations of exposure to quartz and respiratory dust among the studied foundry workers are too low to appreciably impair respiratory health.

Conclusions

We measured air exposure levels of respirable quartz and dust among workers at Swedish iron foundries and qualitatively assessed their exposure to chemical binders, i.e., furfuryl alcohol and formaldehyde. The adjusted average respirable quartz and dust concentrations were 0.038 and 0.66 mg/m3, respectively. Statistically significant increased levels of CC16 were detected for high cumulative exposures to chemical binders compared to low exposed. Non-significant exposure-responses were detected for asthma, breathlessness and FENO for several exposure measures. Our findings suggest that changes in early effect markers such as CC16 and FENO are associated more strongly with exposure to chemical binders than to respirable quartz and dust exposure.

Supporting information

[Figure omitted. See PDF.]

S1 Fig. Flow chart of the procedure of the study for each participant.

https://doi.org/10.1371/journal.pone.0224668.s001

(PDF)

S1 File. Questionnaire air pollution and health.

https://doi.org/10.1371/journal.pone.0224668.s002

(PDF)

S2 File. Questionnaire nitric oxide in exhaled air (FENO).

https://doi.org/10.1371/journal.pone.0224668.s003

(PDF)

S1 Appendix. Statistical analysis.

https://doi.org/10.1371/journal.pone.0224668.s004

(PDF)

Citation: Andersson L, Bryngelsson I-L, Hedbrant A, Persson A, Johansson A, Ericsson A, et al. (2019) Respiratory health and inflammatory markers - Exposure to respirable dust and quartz and chemical binders in Swedish iron foundries. PLoS ONE 14(11): e0224668. https://doi.org/10.1371/journal.pone.0224668

References

1. Rees D, Weiner R. Dust and pneumoconiosis in the South African foundry industry. S Afr Med J 1994; 84(12): 851–855. pmid:7570237

2. Rosenman KD, Reilly MJ, Rice C, V. Hertzberg V, Tseng CY, Anderson HA. Silicosis among foundry workers. Implication for the need to revise the OSHA standard. Am J Epidemiol 1996; 144(9): 890–900. pmid:8890667

3. Sherson D, Svane O, Lynge E. Cancer incidence among foundry workers in Denmark. Arch Environ Health 1991;46(2): 75–81. pmid:2006897

4. Andjelkovich DA., Mathew RM., Richardson RB., Levine RJ. Mortality of iron foundry workers: I. Overall findings. J Occup Med 1990; 32(6): 529–540. pmid:2166148

5. Xu Z, Brown LM, Pan GW, Liu TF, Gao GS, Stone BJ et al. Cancer risks among iron and steel workers in Anshan, China, Part II: Case-control studies of lung and stomach cancer. 1996; Am J Ind Med 30(1): 7–15. pmid:8837676

6. Koskela RS, Mutanen P,Sorsa JA, Klockars M. Factors predictive of ischemic heart disease mortality in foundry workers exposed to carbon monoxide. Am J Epidemiol 2000;152(7): 628–632. pmid:11032157

7. Fan C, Graff P, Vihlborg P., Bryngelsson IL, Andersson L. Silica exposure increases the risk of stroke but not myocardial infarction-a retrospective cohort study. PLoS ONE 2018;13(2)e0192840. pmid:29481578

8. Yoon JH, Ahn YE Cause specific mortality due to malignant and non-malignant disease in Korean foundry workers. 2014; PLoS ONE 9(2): e 8836413(2) https://doi.org/10.1371.

9. Gomes J, Lloyd OL, Norman NJ, Pahwa P. Dust exposure and impairment of lung function at a small iron foundry in a rapidly developing country Occup Environ Med. 2001; 58(10):656–62. pmid:11555687

10. Low I, Mitchell C. Respiratory disease in foundry workers Br J Ind Med 1985;42: 101–105. pmid:3970867

11. Kärävä R, Hernberg S, Koskela R-S, Luoma K.Prevalence of pneumoconiosis and chronic bronchitis in foundry workers. Scand J Work Environ Health 1976;2(1):64–72 pmid:968467

12. Mendonca E, Silva R, Bussacos M, Algranti E, Respiratory impairment in Brazilian foundry workers exposed to sand Am J Ind Med 2007; 50(2): 83–91. pmid:17238133

13. Kuo HC, Chang L, Liang W, Chung B. Respiratory abnormalities among male foundry workers in central Taiwan. Occup. Med. 1999; 49 (8), pp. 499–505.

14. Kayhan S,Tutar U, Cinarka H, Gumus A, Koksal N Prevalence of Occupational Asthma and Respiratory Symptoms in Foundry Workers Hindawi Publishing Corporation Pulmonary Medicine. 2013, Article ID 370138, 4 pages http://dx.doi.org/10.1155/2013/370138.

15. Johnson A, Chan–Yeung M, Maclean L, Atkins E, Dubuncio A, Cheng F, Enarson D. Respiratory abnormalities among workers in an iron and steel foundry British Journal of Industrial Medicine 1985;42(2):94–100.

16. Zarei F, Rezazadeh Azari M, Salehpour S, Khodakarim S, Omidi L, Tavakol E. Respiratory Effects of Simultaneous Exposure to Respirable Crystalline Silica Dust, Formaldehyde, and Triethylamine of a Group of Foundry Workers. J Res Health Sci. 2017; 17(1): e00371. pmid:28413169

17. Åhman M, Alexandersson R, Ekholm U, Bergström B, Dahlqvist M, Ulfvarsson U. Impeded lung function in mouolders and core makers handling furan resin sand Int Arch Environ Health. 1991; 63(3):175–80.

18. Malmberg LP, Turpeinen H, Rytilä P, Sarna S, Haahtela T. Determinants of increased exhaled nitric oxide in patients with suspected asthma. Allergy 2005;60:464–468. pmid:15727577

19. Koskela K, Oksa P, Sauni R, Linnainmaa M, Toivio P, Lehtimaki L, Moilanen E, Nieminen R, Luukkonen R, Uitti J. Pulmonary inflammation in foundry workers J Occup Environ Med. 2015 57(2)124–128. pmid:25654513

20. Ulvestad B,Grethe Randem BAndersson LEllingsen D, Barregard L. Clara cell protein as a biomarker for lung epithelial injury in asphalt workers. J Occup Environ Med 2007;49(10):1073–1078. pmid:18000412

21. Westberg H, Hedbrant A, Persson A, Bryngelsson I, Johansson A, Ericsson A, Sjögren B, Stockfelt L, Särndahl E, Andersson L. Inflammatory and coagulatory markers and exposure to different size fractions of particle mass, number and surface area concentrations in Swedish foundries, in particular respirable quartz Int Arch Environ Health 2019 s10.1007/s00420-019-01446-z.

22. American Foundry Society and Casting Industry Suppliers Association. (2018) Form R-Reporting of binder chemicals used in foundries. American Foundry Society, Schaumburg Illinois 2018;60173 ISBN 10: 0-87433-403-0 2007; http://www.afsinc.org/files/Form%20R.pdf.

23. Health and Safety Executive (HSE 2000). MDHDS: General methods for sampling and gravimetric analysis of inhalable and respirable dust. Report no 14/3, February 2000, Suffolk UK (2000).

24. NIOSH (1994a) Manual of analytical methods, 4th edition. Silica, crystalline, by XRD: method 7500. Cincinnati: National Institute of Occupational Safety and Health, US department of health and human services.

25. Miller MR, Hankinson J, Brusasco V, Burgos F, Casaburi R, Coates A, et al. Standardisation of spirometry. Eur Respir J 2005; 26: 319–338. pmid:16055882

26. Hedenström H, Malmberg P, Agarwal K. Reference values for lung function tests in females. Regression equations with smoking variables. Bull Eur Physiopathol Respir. 1985;21:551–557. pmid:4074961

27. Hedenström H, Malmberg P, Fridriksson HV. Reference values for lung function tests in males. Regression equations with smoking variables. Ups J Med Sci 1986;.91(3) 299–310. pmid:3811032

28. ATS Workshop proceedings. Exhaled nitric oxide and nitric ocxide oxidative metabolism in exhaled nreath condensate. Proc Am Thorac Soc 2006(3) 131–145. ; www.atsjournals.org.

29. Westberg H, Andersson L, Bryngelsson IL, Ngo Y, Ohlson CG. Cancer morbidity and quartz exposure in Swedish iron foundries. Int Arch Occup Environ Health. 2013; 86(5):499–507. Epub 2012 May 22. pmid:22729566

30. Westberg H, Seldén A, Bellander T. Exposure to chemical agents in Swedish aluminum foundries and aluminum remelting plants-a ciomprehensive survey Appl Ocup Environ Hyg 2001;16(1):66–77.

31. Andersson L, Bryngelsson ILB, Ngo Y,Ohlson CGO, Westberg H. Exposure assessment and modeling of quartz in Swedish iron foundries for a nested case-control study on lung cancer. J Occup and Environ Hyg, 2012(9): 110–119.

32. Rudnicka et al 2007

33. British Occupational Hygiene Society, Nederlandse Vereiniging voor Arbeidshygiene. Testing compliance with occupational exposure limits for airborne substances September 2011 BOHS 2017. http://www.bohs.org/wp-content/uploads/Sampling-Strategy-Guidance-2011-1.pdf. Accessed July 6, 2017.

34. Andersson L, Bryngelsson IL, Ohlson CG, Nayström P, Lilja BG, Westberg H. Quartz and dust exposure in Swedish iron foundries. J Occup Environ Hyg. 2009; 6:9–18. pmid:18982534

35. Li C, Sung EA. Review of the healthy worker effect in occupational epidemiology Occup. Med. 1999;49(4) 225–229

36. McAuley D, Matthay M. Clara cell protein CC 16: A new lung epithel biomarker for acute lung injury Chest 2009;135(6):1408–1410 pmid:19497890

37. Broeckaert F, Clippe A, Knoops B, Hermans C, Bernard A. Clara Cell Secretory Protein (CC16): Features as a Peripheral Lung Biomarker. Annals of the New York Academy of Sciences. 2000;923:68–77 https://nyaspubs.onlinelibrary.wiley.com/doi/full/10.1111/j.1749-6632.2000.tb05520.x?sid=nlm%3Apubmed pmid:11193780

38. Lakind JS, Holgate ST, Ownby DR, Mansur AH, Helms PJ, Pyatt D, Hays SM. A critical review of the use of Clara cell secretory protein (CC16) as a biomarker of acute or chronic pulmonary effects. Biomarkers 2007 12(5), 445–467. pmid:17701745

39. Steiner D, Jeggli S, Tschopp A, Bernard A, Oppliger A, Hilfiker S, Hotz P Clara cell protein and surfactant protein B in garbage collectors and in wastewater workers exposed to bioaerosols Int Arch Occup Environ Health. 2005 Apr;78(3):189–97. Epub 2005 Mar 16. pmid:15772810

40. Straumfors A, Eduard W, K. Heldal K, Skogstad M, Barregård L, Ellingsen D(2018): Pneumoproteins and markers of inflammation and platelet activation in the blood of grain dust exposed workers, Biomarkers, pmid:29911898

41. Barregard L, Sallsten G, Andersson L, Almstrand AC, Gustafson P, et al. Experimental exposure to wood smoke: effects on airway inflammation and oxidative stress. J Occup Environ Med. 2008;65(5):319–24.

42. Stockfelt L, Sallsten G, Olin A-C, Almerud P, Samuelsson L, Johannesson S, Molnár P, Strandberg B, Almstrand A-C, Bergemalm-Rynell K, Barregard L. Effects on airways of short-term exposure to two kinds of wood smoke in a chamber study of healthy humans. Inhalation Toxicology 2012; 24(1), 47–59. pmid:22220980

43. Bernard A, Hermans C, van Houte G. Transient increase of Clar cell protein (CC16) after exposure to smoke Opccup Environ Med 1997; 54(1):63–65.

44. Blomberg A, Mudway I, Svensson M, Hagenbjörk-Gustafsson A, Thomasson L, Helleday R, Dumont X, Forsberg B, Nordberg G, Bernard AClara cell protein as a biomarker for ozone-induced lung injury in humans. Eur Respir J. 2003; 22(6):883–8. pmid:14680073

45. Broeckaert F, Bernard A. Clara cell secretory protein (CC16): characteristics and perspectives as lung peripheral biomarker. Clinical and Experimental Allergy 2000; 30(4): 469–475 https://onlinelibrary.wiley.com/doi/full/10.1046/j.1365-2222.2000.00760.x pmid:10718843

46. Bonetto G, Corradi M, Carraro S, Zanconato S, Alinovi R, Folesani G, Da Dalt L, Mutti A, Baraldi E. Longitudinal monitoring of lung injury in children after acute chlorine exposure in a swimming pool. Am J Respir Crit Care Med. 2006;174(5):545–9. Epub 2006 Jun 8. pmid:16763216

47. Provost EB, Chaumont A, Kicinski M, Cox B, Fierens F, et al. Serum levels of club cell secretory protein (Clara) and short- and long-term exposure to particulate air pollution in adolescents. Environment International. 2014;68:66–70. pmid:24709782

48. Freberg BI, Olsen R, Thorud S, Daae HL, Hersson M, et al. Pulmonary function and serum pneumoproteins in professional ski waxers. Inhal Toxicol. 2016;28(1):7–13. pmid:26792362

49. Heldal KK, Barregard L, Larsson P, Ellingsen DG. Pneumoproteins in sewage workers exposed to sewage dust.Int Arch Occup Environ Health. 2013; 86(1):65–70. Epub 2012 Feb 17. pmid:22350277

50. Wang H, Duan H, Meng T, Yang M, Cui L, et al. Local and systemic inflammation may mediate diesel engine exhaust-induced lung function impairment in Chinese occupational cohort. ToxSci 2018; 162(2) 372–382. pmid:29186624

51. Kirkhus NE, Ulvestad B, Barregard L, Skare Ø, Olsen R, Thomassen Y, Ellingsen DG. Pneumoproteins in Offshore Drill Floor Workers. Int J Environ Res Public Health. 2019 Jan 23;16(3).

52. Ellingsen DG, Ulvestad B, Bakke B, Seljeflot I, Barregard L, Thomassen Y. Serum pneumoproteins in tunnel construction workers. Int Arch Occup Environ Health 2015; 88:943–951. pmid:25632885

53. Baur X, Bakehe P, Vellguth H Bronchial asthma and COPD due to irritants in the workplace—an evidence-based approach J Occup Med Tox 2012 7(1):19. pmid:23013890