It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Microencapsulation is a viable technique to protect and retain the properties of phase change materials (PCMs) that are used in thermal energy storage (TES) applications. In this study, an organic ester as a phase change material was microencapsulated using melamine–formaldehyde as the shell material. This microencapsulated PCM (MPCM) was examined with cyclic cryogenic treatment and combined cyclic cryogenic heat treatment processes. The surface morphology studies showed that the shell surfaces had no distortions or roughness after cryogenic treatment. The cryogenically conditioned microcapsules exhibited diffraction peak intensity shifts and crystal structure changes. The onset of melting for the nonconditioned and conditioned microcapsules were measured to be 8.56–9.56 °C, respectively. Furthermore, after undergoing the cryogenic and heat treatment processes, the PCM microcapsules had appreciable latent heat capacities of 39.8 kJ/kg and 60.7 kJ/kg, respectively. Additionally, the microcapsules were found to have good chemical stability after the cryogenic treatment. In addition, the cryogenically conditioned microcapsules were found to be thermally stable up to 128.9 °C, whereas the nonconditioned microcapsules were stable up to 101.9 °C. Based on the test results, it is obvious that the cryogenically conditioned microcapsules exhibited good thermal properties and are very desirable for cool thermal energy storage applications.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Birla Institute of Technology and Science-Pilani, Department of Mechanical Engineering, Hyderabad, India (GRID:grid.466497.e) (ISNI:0000 0004 1772 3598)