It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Microwave-assisted synthesis is known to accelerate the transesterification process and address the issues associated with the conventional thermal process, such as the processing time and the energy input requirement. Herein, the effect of microwave irradiation on the transesterification of palm oil methyl ester (PME) with trimethylolpropane (TMP) was evaluated. The reaction system was investigated through five process parameters, which were reaction temperature, catalyst, time, molar ratio of TMP to PME and vacuum pressure. The yield of TMP triester at 66.9 wt.% and undesirable fatty soap at 17.4% were obtained at 130 °C, 10 mbar, sodium methoxide solution at 0.6 wt.%, 10 min reaction time and molar ratio of TMP to PME at 1:4. The transesterification of palm oil-based methyl ester to trimethylolpropane ester was 3.1 folds faster in the presence of microwave irradiation. The total energy requirement was markedly reduced as compared to the conventional heating method. The findings indicate that microwave-assisted transesterification could probably be an answer to the quest for a cheaper biodegradable biolubricant.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Universiti Putra Malaysia, Department of Chemical and Environmental Engineering, Engineering Faculty, Serdang, Malaysia (GRID:grid.11142.37) (ISNI:0000 0001 2231 800X)
2 Universiti Putra Malaysia, Department of Chemical and Environmental Engineering, Engineering Faculty, Serdang, Malaysia (GRID:grid.11142.37) (ISNI:0000 0001 2231 800X); Universiti Putra Malaysia, Institute of Plantation Studies, Serdang, Malaysia (GRID:grid.11142.37) (ISNI:0000 0001 2231 800X)
3 Universiti Kuala Lumpur, Green Chemistry and Sustainable Engineering Technology Cluster, Centre for Research and Innovation, Alor Gajah, Malaysia (GRID:grid.440439.e) (ISNI:0000 0004 0444 6368)
4 Universiti Putra Malaysia, Institute of Advanced Technology, Serdang, Malaysia (GRID:grid.11142.37) (ISNI:0000 0001 2231 800X)
5 Universiti Putra Malaysia, Department of Physics, Faculty of Science, Serdang, Malaysia (GRID:grid.11142.37) (ISNI:0000 0001 2231 800X)