Multicomponent Synthesis of Luminescent Iminoboronates

Abstract

A family of iminoboronates was prepared through a one-pot multicomponent reaction, starting from boronic acid, anthranilic acid, and different salicylaldehydes. Their synthesis was straightforward and the complexes were obtained in good to excellent yields. Their photophysical properties were assessed in a diluted solution, and the complexes proved to be faintly luminescent. These chelates demonstrated remarkable Aggregation-Induced Emission Enhancement, which was rationalized using crystal structures.

1. Introduction

Boron complexes based on N and O donor ligands have been widely studied due to their ease of preparation and versatility [1]. In terms of luminescent properties, boron complexes are dominated by boron dipyrromethenes (BODIPYs) [2], but recently, boron diketonates [3,4,5] and ketoiminates [6] have emerged as promising alternatives. Moreover, boranils appeared as more versatile [7], being very easily prepared from building blocks that can be modified to tune the properties of the final complex [8,9]. Boron complexes usually suffer a quenching of their emission upon aggregation, which limits their use in luminescent materials. However, they can present the opposite behavior, aggregation-induced emission enhancement (AIEE) [10], when adequately substituted with aromatic rotating groups [11,12,13,14,15]. In these cases, the emission intensity increases upon aggregation, due to the restriction of molecular motions and absence of excimer formations. In these complexes, the ligand is usually bidentate, and the boron bears two fluorine or aromatic substituents. The use of a tridentate ligand is less explored and mainly relies on the use of boronic acid or ester as precursor of the complex.

Boronic acids are widely used for the fluorescent sensing of carbohydrates [16], but rarely used for the synthesis of fluorescent dyes [17,18,19,20,21]. However, they have been used as building blocks in the synthesis of analogs of natural products [22], and advantage has been taken of their reversible bond formations in the complexes, allowing the synthesis to be performed through one-pot multicomponent reactions [23]. In these cases, the multicomponent reaction usually involves the formation of an imine between two building blocks also bearing hydroxy or carboxy groups, and the complexation of the boron into the formed tridentate ligand formed [24]. Here, we report the one-pot multicomponent synthesis of iminoboronates, starting from readily available building blocks, and the study of their photophysical properties.

2. Results and Discussion 2.1. Synthesis

The boron complexes 1a–g were readily obtained in one step (Scheme 1). The imine was formed in situ by the condensation of the appropriate substituted salicylaldehydes 2a–g with anthranilic acid 3 and underwent a double condensation with the phenylboronic acid 4 to form the boron complex in good to excellent yields. This strategy was largely inspired by previously reported procedures but avoids the use of highly toxic carbon tetrachloride as a solvent and uses conventional heating instead of microwave irradiation [25].

This simple and modular approach allowed the synthesis of a family of boron complexes (Figure 1) with various substituents. The substituents did not seem to influence the yield of the reaction, nor its selectivity, as both electron donating (hydroxyl, ether, amino) and electron withdrawing (nitro, bromo) groups were able to be introduced on the salicylaldehyde moieties. Moreover, hydroxy groups can be present and do not seem to disrupt the boron complexation, the lower yield obtained in the case of 1d being ascribed to its incomplete precipitation in methanol. Salicylaldehyde 2g, bearing a diazo substituent, was also used to increase the conjugation of the backbone and therefore modify the color of the product. All compounds were fully characterized by ¹H and ¹³C NMR, and MS (See Supplementary Materials). The complexes bore a chiral boron center and were obtained as a racemic mixture. The separation of the enantiomers was not attempted, even if it may be possible [20].

2.2. Photophysical Properties

Boron complexes often present interesting photophysical properties, such as high absorption coefficients and quantum yields, but iminoboronates have only been described as faintly luminescent in solution [25]. Therefore, the absorption and emission properties of the prepared boron complexes were studied in THF solutions. The absorption spectra present one or two bands (Figure 2, left), the main band being between 360 and 450 nm (Table 1). As expected, the complexes 1f,g, bearing a strong electron donating substituent or with an extended conjugation, presented a bathochromic shift of the main band. The effect of the other substituents is more difficult to assess.

All compounds were emissive in a dilute solution, with low quantum yields (Table 1). The emission profile is composed of two bands (Figure 2, right), and the relative intensity depends on the substituents. The intensity of the band at longer wavelengths seemed to decrease when substituents were introduced, but the trend was not obvious. This band almost disappeared when the dyes bore strong electron donating substituents (1e,f) and when the conjugation increased (1g). Overall, the dyes were only faintly emissive, with quantum yields ranging from 0.1% to 6.0%, which is in accordance with previously reported observations [20].

As the compounds 1a–g seemed luminescent in their powder or crystalline forms, when irradiated with a hand-held UV-lamp, we performed a classical AIEE test. The emission spectra of all compounds were recorded in THF-water mixed solvents at the same concentration and with different proportions of water (See Supplementary Materials). Boron complex 1a exhibits a classical AIEE behavior (Figure 3): when water is added, the compound precipitates and the intensity of the emission increases. When more water is added, the quantity of solid in the suspension increases, and so does the emission intensity up to 4 times the initial intensity. The emission wavelength does not change between solution and aggregates, ruling out the formation of excimers. Unfortunately, all the other complexes 1b–g displayed a different behavior: either they presented a quenching of their emission when they precipitated (1c,f,g), or a shift in their emission wavelength with no clear trend, probably due to the formation of excimers/exciplexes in the aggregate form.

2.3. Crystal Structures

Single crystals suitable for X-ray diffraction were successfully grown for compounds 1a,d,e, by the slow evaporation of saturated solutions in dichloromethane-methanol. The crystal structure of 1a has already been published [25], but was determined again for consistency.

As already mentioned, the complexes were obtained as racemic mixtures, and crystallized as such. They crystallized in centrosymmetric groups, and their asymmetric unit was composed of one enantiomer, the other being generated by symmetry (Figure 4 and Supplementary Materials). All bond lengths and angles are in normal range [27]. Complex 1d crystallized together with one molecule of methanol, accepting one hydrogen bond from a phenol hydroxy group and donating one hydrogen bond to the carboxylic oxygen linked to the boron center.

The ligands adopted a non-planar geometry to accommodate the tetrahedral boron center. The dihedral angle N-B-C-C between the phenyl of the boronic acid and the ligand was the main difference between the complexes: −17.17° for 1a, −57.48° for 1d and −110.11° for 1e. In the crystal packing, 1a arranged into linear chains through C-H···O hydrogen bonds, and there were no close contacts between the chains, which restrained the molecular motions without introducing the formation of excimers, thus rationalizing the AIEE behavior observed. By contrast, both 1d and 1e arranged into tridimensional networks involving multiple close contacts, which probably favored the formation of excimers and exciplexes, resulting in a quenching of the emission in the solid state. 3. Materials and Methods General procedure for the synthesis of the complexes: the appropriate salicylaldehyde derivative (1 equiv, 1 mmol) was dissolved in MeOH (20 mL). Anthranilic acid (1 equiv, 1 mmol) was added, followed by phenylboronic acid (1 equiv, 1 mmol), and the reaction mixture was refluxed for 12 h. After cooling down to room temperature, the solid was collected by filtration, washed with MeOH, and dried in air. When necessary, the product was further purified by silica gel flash column chromatography. The boron complexes were obtained as colored solids in 40–95% yield. 3.1. 7-Phenyl-5H,7H-7λ⁴,14λ⁴-benzo[d]benzo[5,6][1,3,2]oxazaborinino[2,3-b][1,3,2]oxazaborinin-5-one 1a Salicylaldehyde (1 equiv, 1 mmol, 122 mg) was dissolved in MeOH (20 mL). Anthranilic acid (1 equiv, 1 mmol, 137 mg) was added, followed by phenylboronic acid (1 equiv, 1 mmol, 122 mg), and the reaction mixture was refluxed for 12 h. After cooling down to room temperature, the solid was collected by filtration, washed with MeOH, and dried in air. The product was obtained as a yellow solid (295 mg, 90% yield) without further purification. The compound gave single crystals suitable for X-ray diffraction by slow evaporation from a saturated solution in DCM/MeOH. m.p. 259–261 °C. ¹H NMR (300.13 MHz, CDCl₃, 25 °C): δ = 8.70 (s, 1H, CHN), 8.27 (dd, ³J_H-H 7.8, ⁴J_H-H 1.2 Hz, 1H, aromatic CH), 7.69–7.59 (m, 3H, aromatic CH), 7.54–7.49 (m, 2H, aromatic CH), 7.29–7.26 (m, 2H, aromatic CH), 7.14–7.08 (m, 4H, aromatic CH), 6.99 (ddd, ³J_H-H 8.1, ³J_H-H 8.1, ⁴J_H-H 1.2 Hz, 1H, aromatic CH). ¹³C NMR (75 MHz, CDCl₃, 25 °C): δ = 161.8 (C=O), 160.3 (C=N), 158.3 (2C, C-O, C-N), 140.7 (C-B), 139.8 (Cquat), 134.4 (C-H), 132.9 (C-H), 132.3 (C-H), 130.6 (C-H), 130.0 (C-H), 128.1 (C-H), 127.7 (C-H), 125.1 (C-H), 120.5 (C-H), 120.3 (C-H), 117.7 (C-H), 116.1 (Cquat). 3.2. 11-Nitro-7-phenyl-5H,7H-7λ⁴,14λ⁴-benzo[d]benzo[5,6][1,3,2]oxazaborinino[2,3-b][1,3,2]oxazaborinin-5-one 1b p-Nitrosalicylaldehyde (1 equiv, 1 mmol, 167 mg) was dissolved in MeOH (20 mL). Anthranilic acid (1 equiv, 1 mmol, 137 mg) was added, followed by phenylboronic acid (1 equiv, 1 mmol, 122 mg), and the reaction mixture was refluxed for 4 h. After cooling down to room temperature, the solid was collected by filtration, washed with MeOH, and dried in air. The product was obtained as a yellow solid (230 mg, 62% yield) without further purification. m.p. 353–355 °C. ¹H NMR (300.13 MHz, Acetone-d₆, 25 °C): d = 9.81 (s, 1H, CHN), 8.85 (d, ⁴J_H-H 3.0 Hz, 1H, aromatic CH), 8.53 (dd, ³J_H-H 9.0, ⁴J_H-H 3.0 Hz, 1H, aromatic CH), 8.17–8.14 (m, 2H, aromatic CH), 7.85 (ddd, ³J_H-H 5.7, ³J_H-H 8.1, ⁴J_H-H 1.5 Hz, 1H, aromatic CH), 7.65 (ddd, ³J_H-H 7.5, ³J_H-H 7.5, ⁴J_H-H 0.9 Hz, 1H, aromatic CH), 7.31–7.27 (m, 2H, aromatic CH), 7.22 (d, ³J_H-H 9.0 Hz, 1H, aromatic CH), 7.13–7.09 (m, 3H, aromatic CH). ¹³C NMR (75 MHz, Acetone-d₆, 25 °C): d = 162.2 (C=O), 161.5 (C=N), 157.4 (C-O), 153.1 (C-N), 140.6 (C-B), 135.4 (Cquat), 134.5 (C-H), 132.0 (C-H), 131.3 (C-H), 131.2 (2C, C-H), 131.0 (C-H), 128.8 (C-H), 128.4 (2C, C-H, Cquat), 125.9 (Cquat), 121.1 (C-H), 120.2 (C-H). ESI⁺-MS m/z = 373.1 [M + H]⁺, 395.1 [M + Na]⁺; HRMS-ESI⁺ m/z for [C₂₀H₁₃O₅N₂B + H]⁺ calcd 373.0996, found 373.0981; HRMS-ESI⁺ m/z for [C₂₀H₁₃O₅N₂B + Na]⁺ calcd 395.0815, found 395.0809. 3.3. 9,11-Dibromo-7-phenyl-5H,7H-7λ⁴,14λ⁴-benzo[d]benzo[5,6][1,3,2]oxazaborinino[2,3-b][1,3,2]oxazaborinin-5-one 1c 4,6-Dibromosalicylaldehyde (1 equiv, 0.25 mmol, 70 mg) was dissolved in MeOH (20 mL). Anthranilic acid (1 equiv, 0.25 mmol, 34 mg) was added, followed by phenylboronic acid (1 equiv, 0.25 mmol, 31 mg), and the reaction mixture was refluxed for 2 h. After cooling down to room temperature, the solid was collected by filtration, washed with MeOH, and dried in air. The product was obtained as a yellow solid (74 mg, 61% yield) without further purification. m.p. 353–355 °C. ¹H NMR (300.13 MHz, Acetone-d₆, 25 °C): d = 9.60 (s, 1H, CHN), 8.17–8.12 (m, 3H, aromatic CH), 8.05 (bs, 1H, aromatic CH), 7.85 (dd, ³J_H-H 7.7, ³J_H-H 7.7 Hz, 1H, aromatic CH), 7.66 (dd, ³J_H-H 7.4, ³J_H-H 7.4 Hz, 1H, aromatic CH), 7.25 (bs, 2H, aromatic CH), 7.10 (br s, 3H, aromatic CH). ¹³C NMR (75 MHz, Acetone-d₆, 25 °C): d = 161.4 (C=O), 161.3 (C=N), 155.9 (2C, C-O, C-N), 144.2 (C-H), 140.5 (C-B), 135.9 (C-H), 135.4 (C-H), 132.0 (C-H), 131.3 (C-H), 128.6 (2C, C-H, C-H), 128.3 (C-H), 125.8 (C-H), 120.1 (Cquat), 119.6 (Cquat), 114.6 (C-Br), 111.3 (C-Br). ESI⁺-MS m/z = 483.9, 485.9, 487.9 [M + H]⁺, 505.9, 507.9, 507.9 [M + Na]⁺; HRMS-ESI⁺ m/z for [C₂₀H₁₂O₃NBBr₂ + H]⁺ calcd 485.9335, found 485.9319. 3.4. 10,12-Dihydroxy-7-phenyl-5H,7H-7λ⁴,14λ⁴-benzo[d]benzo[5,6][1,3,2]oxazaborinino[2,3-b][1,3,2]oxazaborinin-5-one 1d 2,4,6-Trihydroxybenzaldehyde (1 equiv, 0.5 mmol, 77 mg) was dissolved in MeOH (20 mL). Anthranilic acid (1 equiv, 0.5 mmol, 69 mg) was added, followed by phenylboronic acid (1 equiv, 0.5 mmol, 61 mg), and the reaction mixture was refluxed for 2 h. After cooling down to room temperature, the solid is collected by filtration, washed with MeOH, and dried in air. After silica gel flash column chromatography (eluent: DCM/MeOH, 90/10), the product was obtained as a yellow solid (72 mg, 40% yield). The compound gave single crystals suitable for X-ray diffraction by slow evaporation from a saturated solution in MeOH. m.p. > 350 °C. ¹H NMR (300.13 MHz, Acetone-d₆, 25 °C): d = 9.10 (s, 1H, CHN), 8.02 (d, ³J_H-H 8.0 Hz, 1H, aromatic CH), 7.96 (d, ³J_H-H 8.0 Hz, 1H, aromatic CH), 7.71 (dd, ³J_H-H 7.8, ³J_H-H 7.8 Hz, 1H, aromatic CH), 7.42 (dd, ³J_H-H 7.2, ³J_H-H 7.2 Hz, 1H, aromatic CH), 7.16–7.06 (m, 5H, aromatic CH), 5.92 (d, ⁴J_H-H 1.8 Hz, 1H, aromatic CH), 5.80 (d, ⁴J_H-H 1.8 Hz, 1H, aromatic CH). ¹³C NMR (75 MHz, Acetone-d₆, 25 °C): d = 170.6 (C=O), 162.7 (C=N), 161.8 (C-O), 161.0 (C-O), 152.5 (C-O), 150.7 (C-N), 140.5 (C-B), 134.5 (C-H), 130.4 (C-H), 130.2 (C-H), 127.6 (C-H), 127.3 (C-H), 127.2 (C-H), 122.7 (C-H), 118.5 (Cquat), 101.8 (Cquat), 95.8 (C-H), 94.6 (C-H). ESI⁺-MS m/z = 360.1 [M + H]⁺, 382.1 [M + Na]⁺; HRMS-ESI⁺ m/z for [C₂₀H₁₄O₅NB + H]⁺ calcd 360.1043, found 360.1035. 3.5. 10,12-Dimethoxy-7-phenyl-5H,7H-7λ⁴,14λ⁴-benzo[d]benzo[5,6][1,3,2]oxazaborinino[2,3-b][1,3,2]oxazaborinin-5-one 1e 3,5-Dimethoxysalicylaldehyde (1 equiv, 1 mmol, 182 mg) was dissolved in MeOH (20 mL). Anthranilic acid (1 equiv, 1 mmol, 137 mg) was added, followed by phenylboronic acid (1 equiv, 1 mmol, 122 mg), and the reaction mixture was refluxed for 4 h. After cooling down to room temperature, the solid was collected by filtration, washed with MeOH, and dried in air. The product was obtained as a yellow solid (293 mg, 76% yield) without further purification. m.p. 251–253 °C. ¹H NMR (300.13 MHz, Acetone-d₆, 25 °C): δ = 9.24 (s, 1H, CHN), 8.07 (dd, ³J_H-H 7.8, ⁴J_H-H 1.5 Hz, 1H, aromatic CH), 8.04 (d, ³J_H-H 8.4 Hz, 1H, aromatic CH), 7.73 (ddd, ³J_H-H 7.2, ³J_H-H 8.1, ⁴J_H-H 1.5 Hz, 1H, aromatic CH), 7.47 (ddd, ³J_H-H 7.8, ³J_H-H 7.8, ⁴J_H-H 1.0 Hz, 1H, aromatic CH), 7.29–7.26 (m, 2H, aromatic CH), 7.10–7.07 (m, 3H, aromatic CH), 6.14 (s, 2H, aromatic CH), 3.94 (s, 3H, OCH₃), 4.00 (s, 3H, OCH₃). ¹³C NMR (75 MHz, Acetone-d₆, 25 °C): δ = 172.6 (C-OCH₃), 163.5 (C-OCH₃), 153.8 (C=N), 150.8 (C=O), 146.4 (C-O), 142.0 (C-N), 141.7 (C-B), 135.0 (C-H), 131.8 (C-H), 131.4 (C-H), 128.9 (C-H), 128.1 (C-H), 125.1 (C-H), 119.2 (C-H), 108.7 (Cquat), 103.7 (Cquat), 95.5 (C-H), 92.2 (C-H), 56.9 (OCH₃), 56.8 (OCH₃). ESI⁺-MS m/z = 388.1 [M + H]⁺, 410.1 [M + Na]⁺; HRMS-ESI⁺ m/z for [C₂₂H₁₈O₅NB + H]⁺ calcd 388.1356, found 388.1351. 3.6. 10-(Diethylamino)-7-phenyl-5H,7H-7λ⁴,14λ⁴-benzo[d]benzo[5,6][1,3,2]oxazaborinino[2,3-b][1,3,2]oxazaborinin-5-one 1f 4-Diethylaminosalicylaldehyde (1 equiv, 0.5 mmol, 96 mg) was dissolved in MeOH (10 mL). Anthranilic acid (1 equiv, 0.5 mmol, 69 mg) was added, followed by phenylboronic acid (1 equiv, 0.5 mmol, 61 mg), and the reaction mixture was refluxed for 1 h. After cooling down to room temperature, the solid was collected by filtration, washed with MeOH, and dried in air. The product was obtained as a yellow solid (190 mg, 95% yield) without further purification. m.p. 284–286 °C. ¹H NMR (300.13 MHz, Acetone-d₆, 25 °C): d = 8.98 (s, 1H, CHN), 8.04 (dd, ³J_H-H 7.8, ⁴J_H-H 1.2 Hz, 1H, aromatic CH), 7.90 (d, ³J_H-H 9.0 Hz, 1H, aromatic CH), 7.66 (ddd, ³J_H-H 7.2, ³J_H-H 8.1, ⁴J_H-H 1.5 Hz, 1H, aromatic CH), 7.49 (d, ³J_H-H 9.3 Hz, 1H, aromatic CH), 7.36 (ddd, ³J_H-H 7.8, ³J_H-H 7.8, ⁴J_H-H 1.0 Hz, 1H, aromatic CH), 7.29–7.26 (m, 2H, aromatic CH), 7.10–7.03 (m, 3H, aromatic CH), 6.54 (dd, ³J_H-H 9.3, ⁴J_H-H 2.4 Hz, 1H, aromatic CH), 6.13 (d, ⁴J_H-H 2.1 Hz, 1H, aromatic CH), 3.57 (q, ³J_H-H 7.2 Hz, 4H, NCH₂), 1.23 (t, ³J_H-H 7.2 Hz, 6H, CH₃). ¹³C NMR (75 MHz, Acetone-d₆, 25 °C): d = 162.9 (C=O), 162.8 (C-O), 158.2 (C-N), 154.8 (C=N), 142.3 (C-N), 141.7 (C-B), 136.2 (C-H), 134.7 (C-H), 131.8 (C-H), 131.4 (C-H), 128.0 (C-H), 127.8 (C-H), 127.5 (C-H), 124.6 (Cquat), 118.2 (C-H), 108.5 (Cquat), 107.8 (C-H), 98.4 (C-H), 45.7 (CH₂CH₃), 13.0 (CH₂CH₃). ESI⁺-MS m/z = 399.2 [M + H]⁺, 421.2 [M + Na]⁺; HRMS-ESI⁺ m/z for [C₂₄H₂₃O₃N₂B + H]⁺ calcd 399.1880, found 399.1869; HRMS-ESI⁺ m/z for [C₂₄H₂₃O₃N₂B + Na]⁺ calcd 421.1699, found 421.1689. 3.7. (E)-11-[(4-Methoxyphenyl)diazenyl]-7-phenyl-5H,7H-7λ⁴,14λ⁴-benzo[d]benzo[5,6][1,3,2]oxazaborinino[2,3-b][1,3,2]oxazaborinin-5-one 1g (E)-2-Hydroxy-5-[(4-methoxyphenyl)diazenyl]benzaldehyde (1 equiv, 0.25 mmol, 64 mg) was dissolved in MeOH (20 mL). Anthranilic acid (1 equiv, 0.25 mmol, 34 mg) was added, followed by phenylboronic acid (1 equiv, 0.25 mmol, 31 mg), and the reaction mixture was refluxed for 5 h. After cooling down to room temperature, the solid was collected by filtration, washed with MeOH, and dried in air. The product was obtained as a yellow solid (71 mg, 62% yield) without further purification. m.p. 282–284 °C. ¹H NMR (300.13 MHz, Acetone-d₆, 25 °C): δ = 9.74 (s, 1H, CHN), 8.39 (d, ⁴J_H-H 2.5 Hz, 1H, aromatic CH), 8.28 (dd, ³J_H-H 9.0, ⁴J_H-H 2.5 Hz, 1H, aromatic CH), 8.20–8.13 (m, 2H, aromatic CH), 7.92 (d, ³J_H-H 9.0 Hz, 2H, aromatic CH), 7.83 (ddd, ³J_H-H 8.2, ³J_H-H 7.4, ⁴J_H-H 1.6 Hz, 1H, aromatic CH), 7.62 (ddd, ³J_H-H 7.6, ³J_H-H 7.6, ⁴J_H-H 1.1 Hz, 1H, aromatic CH), 7.34–7.28 (m, 2H, aromatic CH), 7.19 (d, ³J_H-H 9.0 Hz, 1H, aromatic CH), 7.16–7.08 (m, 5H, aromatic CH), 3.92 (s, 3H, OCH₃). ¹³C NMR (75 MHz, Acetone-d₆, 25 °C): δ = 163.3 (C=O), 162.3 (C=N), 162.1 (C-O), 161.8 (C-O), 147.5 (C-N), 146.7 (C-N), 140.9 (C-B), 135.3 (C-N), 133.7 (C-H), 131.9 (C-H), 131.3 (C-H), 130.7 (C-H), 129.6 (C-H), 128.5 (C-H), 128.3 (C-H), 125.8 (Cquat), 125.4 (C-H), 123.7 (Cquat), 120.9 (C-H), 120.1 (C-H), 115.3 (C-H), 114.9 (C-H), 56.1 (OCH₃). ESI⁺-MS m/z = 462.2 [M + H]⁺, 484.1 [M + Na]⁺; HRMS-ESI⁺ m/z for [C₂₇H₂₀O₄N₃B + H]⁺ calcd 462.1625, found 462.1609; HRMS-ESI⁺ m/z for [C₂₇H₂₀O₄N₃B + Na]⁺ calcd 484.1445, found 484.1429. 4. Conclusions A straightforward one-pot multicomponent reaction was implemented, allowing the rapid preparation of boron complexes based on phenylboronic acid. This versatile methodology was compatible with a wide range of derivatives, and the complexes were decorated with electron donating or withdrawing substituents. They proved to be faintly luminescent in a dilute solution, but the quantum yield increased when a strongly electron donating substituent was adequately placed. The parent compound demonstrated aggregation-induced emission enhancement, but unfortunately, the emission intensity of the other complexes was quenched in the solid state, probably due to the formation of excimers. Overall, this study should open the way to the design and synthesis of other boron complexes, which may find applications as luminescent materials or probes.

Supplementary Materials

The following are available online: 1H and 13C NMR spectra, absorption, and emission spectra. Details of the crystal data collection, solution, and refinement of compounds 1a, 1d-MeOH, and 1e. Crystal structures in CIF format.

Author Contributions

Conceptualization, synthesis, single-crystal X-ray diffraction studies, S.G.; photophysical characterizations, writing-original draft preparation, S.G. and C.I.C.E.; writing-review and editing, S.G., J.R. and A.M.S.S.; funding acquisition, S.G., J.R. and A.M.S.S. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by Fundação para a Ciência e a Tecnologia (FCT) through research units UIDB/50006/2020, UID/CTM/50011/2019, UIDB/50011/2020 & UIDP/50011/2020, and by the European Union (FEDER program) through project CENTRO-01-0145-FEDER-000003.

Acknowledgments

Thanks are due to the University of Aveiro, FCT/MEC, Centro 2020 and Portugal2020, the COMPETE program, and the European Union (FEDER program) via the financial support to the LAQV-REQUIMTE (UIDB/50006/2020), to the CICECO-Aveiro Institute of Materials (UID/CTM/50011/2019, UIDB/50011/2020, and UIDP/50011/2020), financed by national funds through the FCT/MCTES, to the Portuguese NMR Network, and to the PAGE project "Protein aggregation across the lifespan" (CENTRO-01-0145-FEDER-000003). SG is supported by national funds (OE), through FCT, I.P., in the scope of the framework contract foreseen in the numbers 4, 5, and 6 of article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19.

Conflicts of Interest

The authors declare no conflict of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, or in the decision to publish the results.

References

1. Frath, D.; Massue, J.; Ulrich, G.; Ziessel, R. Luminescent materials: Locking p-conjugated and heterocyclic ligands with Boron(III). Angew. Chem. Int. Ed. 2014, 53, 2290-2310.

2. Loudet, A.; Burgess, K. BODIPY dyes and their derivatives: Syntheses and spectroscopic properties. Chem Rev. 2007, 107, 4891-4932.

3. Guieu, S.; Pinto, J.; Silva, V.L.M.; Rocha, J.; Silva, A.M.S. Synthesis, post-modification and fluorescence properties of boron-diketonate complexes. Eur. J. Org. Chem. 2015, 2015, 3423-3426.

4. Costa, L.D.; Guieu, S.; Rocha, J.; Silva, A.M.S.; Tomé, A.C. Porphyrin-boron diketonate dyads. New J. Chem. 2017, 41, 2186-2192.

5. Vaz, P.A.A.M.; Rocha, J.; Silva, A.M.S.; Guieu, S. Difluoroborate complexes based on 2'-hydroxyphenones as solid-state fluorophores. Dyes Pigments 2021, 184, 108720.

6. Yoshii, R.; Nagai, A.; Tanaka, K.; Chujo, Y. Highly emissive boron ketoiminate derivatives as a new class of Aggregation-Induced Emission fluorophores. Chem. Eur. J. 2013, 19, 4506-4512.

7. Frath, D.; Azizi, S.; Ulrich, G.; Retailleau, P.; Ziessel, R. Facile synthesis of highly fluorescent boranil complexes. Org. Lett. 2011, 13, 3414-3417.

8. Guieu, S.; Cardona, F.; Rocha, J.; Silva, A.M.S. Luminescent bi-metallic fluoroborate derivatives of bulky salen ligands. New J. Chem. 2014, 38, 5411-5414.

9. Cardona, F.; Rocha, J.; Silva, A.M.S.; Guieu, S. Δ1-Pyrroline based boranyls: Synthesis, crystal structures and luminescent properties. Dyes Pigments 2014, 111, 16-20.

10. Hong, Y.; Lam, J.W.Y.; Tang, B.Z. Aggregation-induced emission. Chem. Soc. Rev. 2011, 40, 5361-5388.

11. Vaz, P.A.A.M.; Rocha, J.; Silva, A.M.S.; Guieu, S. Aggregation-induced emission enhancement of chiral boranils. New J. Chem. 2018, 42, 18166-18171.

12. Duan, W.; Liu, Q.; Huo, Y.; Cui, J.; Gong, S.; Liu, Z. AIE-active boron complexes based on benzothiazole-hydrazone chelates. Org. Biomol. Chem. 2018, 16, 4977-4984.

13. Potopnyk, M.A.; Lytvyn, R.; Danyliv, Y.; Ceborska, M.; Bezvikonnyi, O.; Volyniuk, D.; Gražulevičius, J.V. N,O π-Conjugated 4-substituted 1,3-thiazole BF2 complexes: Synthesis and photophysical properties. J. Org. Chem. 2018, 83, 1095-1105.

14. Gao, H.; Xu, D.; Wang, Y.; Zhang, C.; Yang, Y.; Liu, X.; Han, A.; Wang, Y. Aggregation-induced emission and mechanofluorochromism of tetraphenylbutadiene modified β-ketoiminate boron complexes. Dyes Pigments 2018, 150, 165-173.

15. Zhao, N.; Ma, C.; Yang, W.; Yin, W.; Wei, J.; Li, N. Facile construction of boranil complexes with aggregation-induced emission characteristics and their specific lipid droplet imaging applications. Chem. Commun. 2019, 55, 8494-8497.

16. Fang, G.; Wang, H.; Bian, Z.; Sun, J.; Liu, A.; Fang, H.; Liu, B.; Yao, Q.; Wu, Z. Recent development of boronic acid-based fluorescent sensors. RSC Adv. 2018, 8, 29400-29427.

17. Zhang, H.; Huo, C.; Ye, K.; Zhang, P.; Tian, W.; Wang, Y. Synthesis, structures, and luminescent properties of phenol-pyridyl boron complexes. Inorg. Chem. 2006, 45, 2788-2794.

18. Alcaide, M.M.; Santos, F.M.F.; Pais, V.F.; Carvalho, J.I.; Collado, D.; Pérez-Inestrosa, E.; Arteaga, J.F.; Boscá, F.; Gois, P.M.P.; Pischel, U. Electronic and functional scope of boronic acid derived salicylidenehydrazone (BASHY) complexes as fluorescent dyes. J. Org. Chem. 2017, 82, 7151-7158.

19. Jiménez, V.G.; Santos, F.M.F.; Castro-Fernández, S.; Cuerva, J.M.; Gois, P.M.P.; Pischel, U.; Campaña, A.G. Circularly polarized luminescence of boronic acid-derived salicylidenehydrazone complexes containing chiral boron as stereogenic unit. J. Org. Chem. 2018, 83, 14057-14062.

20. Zhang, B.; Wang, S.; Tan, J.; Zhang, X. Unique fluorescence of boronic acid derived salicylidenehydrazone complexes with two perpendicular ICT: Solvent effect on PET process. Dyes Pigments 2018, 155, 186-193.

21. Christou, V.; Watkins, S.E.; McCann, R.; Redshaw, C.; Elsegood, M.R.J. Synthesis, structures and luminescent behaviour of tridentate salicylaldiminato-type borate complexes. Inorg. Chim. Acta 2010, 363, 1173-1178.

22. Montalbano, F.; Candeias, N.R.; Veiros, L.F.; André, V.; Duarte, M.T.; Bronze, M.R.; Moreira, R.; Gois, P.M.P. Four-component assembly of chiral N-B heterocycles with a natural product-like framework. Org. Lett. 2012, 14, 988-991.

23. Montalbano, F.; Cal, P.M.S.D.; Carvalho, M.A.B.R.; Gonçalves, L.M.; Lucas, S.D.; Guedes, R.C.; Veiros, L.F.; Moreira, R.; Gois, P.M.P. Discovery of new heterocycles with activity against human neutrophile elastase based on a boron promoted one-pot assembly reaction. Org. Biomol. Chem. 2013, 11, 4465-4472.

24. Adib, M.; Sheikhi, E.; Bijanzadeh, H.R.; Zhu, L.-G. Microwave-assisted reaction between 2-aminobenzoic acids, 2-hydroxybenzaldehydes, and arylboronic acids: A one-pot three-component synthesis of bridgehead bicyclo[4.4.0]boron heterocycles. Tetrahedron 2012, 68, 3377-3383.

25. Santos, F.M.F.; Rosa, J.N.; Candeias, N.R.; Parente Carvalho, C.; Matos, A.I.; Ventura, A.E.; Florindo, H.F.; Silva, L.C.; Pischel, U.; Gois, P.M.P. A three-component assembly promoted by boronic acids delivers a modular fluorophore platform (BASHY dyes). Chem. Eur. J. 2016, 22, 1631-1637.

26. Crosby, G.A.; Demas, J.N. Measurement of photoluminescence quantum yields. Review. J. Phys. Chem. 1971, 75, 991-1024.

27. Allen, F.H.; Kennard, O.; Watson, D.G.; Brammer, L.; Orpen, A.G.; Taylor, R. Tables of bond lengths determined by X-ray and neutron diffraction. Part 1. Bond lengths in organic compounds. J. Chem. Soc. Perkin Trans. 2 1987, 12, 1-19.