It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
This paper describes the experimental study of surface pressure over a supercritical airfoil which was oscillated in pure pitching, pure plunging and combined pitch-plunge motions at the Reynolds number of 8.76*105. While the surface pressure distribution is of significant importance in stability and performance of an airfoil, not sufficient information is available on the pressure distribution in dynamic stall. The experiments were conducted in a closed-loop wind tunnel utilizing pressure transducers array. The motions were designed to maintain constant reduced frequency, Strouhal number and phase difference. Three different regions were assumed to represent the pressure distribution over the airfoil. The results showed that LEV formed on the upper surface manifested different behavior. In the attached flow region the LEV grew and shrunk over the upper surface but in the light stall region the LEV spilled on the airfoil while a small partial LEV remained at the leading edge. In the deep stall region the LEV spilled entirely and the flow was fully separated. The formation of Laminar Separation Bubbles and suction peaks were also reported in low angles of attack. Besides, the pitching moment Damping Factor was studied to determine the level of airfoil stall flutter stability. For lower amplitudes of pitching motion the airfoil seemed to be stable except where deep stall occurred. However for high amplitudes the airfoil had a tendency to enter the stall flutter. Nevertheless, forcing the airfoil to undergo a combined motion improved the stability condition in all cases.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer