It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
The polluted marine environment causes bioaccumulation of heavy metals particularly by fish, which is consumed by humans as sources of nutrients for humans, particularly as a source of protein. Thus, the investigation of the toxic heavy metals concentration levels in fish is essential. This study aimed to evaluate the heavy metals (Cd, Cr, As, Ni, Fe, Hg and Cu) contents in five different fish species, namely Rastelligar kanagurta, Selaroides leptolepis, Megalaspis cordyla, Decapterus ruselli and Euthynnus affinis. Each sample has been dried and grinds to 100 microns of powder form. The elemental composition of the heavy metals was determined using the rapid and versatile analytical technique, which is Scanning Electron Microscopy with Energy Dispersive X-ray analysis (SEM-EDX) and the results were expressed as an atomic percentage. The percentage concentrations of Cd, As, Cr and Ni were found to be higher in R. kanagurta which are 0.01%, 0.02%, 0.03% and 0.02%, while Cu was found to be higher in S. leptolepis which is 0.29%. For Hg element analysis, it was found that this element only exists in D. ruselli species with atomic percentage of 0.02%. The atomic percentage concentration of As in R. kanagurta and S. leptolepis are 0.02% and 0.01%. The element of Cr, Fe and Ni were detected in M. cordyla with atomic percentage of 0.01%, 0.02% and 0.02%. In E. affinis, Fe was the highest concentration of metals detected with 0.02%, while other elements such as Cr, Cu and Ni recorded similar the atomic percentages concentration at 0.01%. This study revealed that R. kanagurta species contributed most of the elements compared to other species. The accumulation of these toxic heavy metals from this fish species could contribute to the toxicity of heavy metals in the human body. However, since all heavy metal concentration measurements in this study are in atomic percentages level, hence it can be considered that the measurements are below the acceptable limit that suggested by WHO, FAO and UNSCEAR
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Faculty of Applied Science and Technology, Universiti Tun Hussein Onn Malaysia, Pagoh Education Hub, Panchor, Pagoh, 84600, Muar, Johor, Malaysia.
2 Faculty of Engineering Technology, Universiti Tun Hussein Onn Malaysia, Pagoh Education Hub, Panchor, Pagoh, 84600, Muar, Johor, Malaysia.
3 Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310 Skudai, Johor, Malaysia.
4 School of Animal Sciences, Faculty of Bioresources and Food Industry, Universiti Sultan Zainal Abidin, Besut Campus, 22200 Besut, Terengganu, Malaysia.