It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Heat storage performance of an open thermochemical heat storage (TCHS) system using composite salt hydrates of Wakkanai siliceous shale (WSS) - 9.6 wt.% LiCl was investigated numerically. A two-dimensional model considering the combined heat and mass transfer was developed. The calculation results were validated by the experimental results obtained in our previous study. The inlet air temperature, inlet air relative humidity, humid air flow rate, the ratio of the thickness of air channel and the thickness of composite solid wall, and length of the TCHS unit were evaluated to evaluate the heat storage performance. When the ratio of the thickness of air channel and the thickness of composite solid wall is 5 and the length of the heat storage unit is 0.1 m, the volumetric heat storage density of the open TCHS system can reach 510 MJ/m3.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Department of Building Environment and Energy Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai 200093, China; Environmental System Research Laboratory, Faculty of Engineering, Hokkaido University, N13-W8, Sapporo 060-8628, Japan
2 Department of Building Environment and Energy Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai 200093, China
3 Environmental System Research Laboratory, Faculty of Engineering, Hokkaido University, N13-W8, Sapporo 060-8628, Japan