It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
High total cooling load (COLA) relatively during peak and mid-peak as compared to off-peak hour’s period requires more operating equipment of chiller plant (CHIP) to be operated during that period. The more operating equipment working, the more energy consumed is required to provide cooling thermal for COLA. High energy consumption of CHIP operation during peak and mid-peak hour lead high electricity cost due to higher energy charge charged by utility for every per kWh energy consumed by a CHIP operation. Therefore, this study aims to determine potential energy saving of CHIP operation by using optimal charging of ice thermal energy storage (ITES), then provide cooling thermal (COMA) for total COLA through discharging operation. Cooling thermal of ITES was charged based on maximum required COLA during peak and mid-peak hour. In this study, an optimization technique of linear programming was used to charge ITES optimally during off-peak hour. Analysis was conducted to compare the energy consumption of CHIP operation by using ITES discharging operation with the current practice of CHIP operator. This analysis showed that, the potential energy saving based on this strategy by using optimization technique is 27.89%.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Department of Electrical & Electronic Engineering, Faculty of Engineering, Universiti Putra Malaysia (UPM), Serdang, Selangor, Malaysia; Malaysia Nuclear Agency, Bangi, Selangor, Malaysia
2 Department of Electrical & Electronic Engineering, Faculty of Engineering, Universiti Putra Malaysia (UPM), Serdang, Selangor, Malaysia
3 Faculty of Electrical Engineering, Universiti Teknologi Mara (UiTM), Shah Alam, Selangor, Malaysia
4 Malaysia Nuclear Agency, Bangi, Selangor, Malaysia