It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Measurement of the residual betatron coupling with skew quadrupole modulation is a new diagnostics technique. It was developed and tested at the Relativistic Heavy Ion Collider (RHIC) as a promising method for measuring coupling on the ramp. By modulating the strengths of skew quadrupole families, the two tunes' responses are precisely measured with the phase lock loop system. The projection ratio of the residual coupling coefficient onto the coupling modulation direction can be determined. In this article, the analytical solution to the skew quadrupole modulation is given. Dedicated beam studies were carried out in RHIC Run'04 and the results are presented. The ability to measure coupling on the ramp opens the possibility of continuously correcting coupling during acceleration.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer