It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Generation of noise by reciprocating internal combustion engines is the effect of operation performed by them. Modernization of fuel feeding the power unit makes it possible to limit the emitted sounds preserving the engine’s high operating parameters. The conducted studies concerned comparison of the noise emission generated by a combustion engine fed by diesel oil and a mixture of fatty acids methyl esters (bio component) and the diesel oil in proportions 10%, 30% and 50% of bio component additive, at standard settings of the fuel injection controller. The subject matter of the tests there was the combustion engine with self-ignition of the power of 80 kW with direct ignition common rail, assembled in a vehicle. Adaptation was performed in the selected means of transport making it possible to change quickly the feeding fuel. The test was conducted in the chassis bed. It results from the conducted tests, that the unit fed with the diesel fuel generates noise on the level of 123 dB. Increase of the bio component’s share in the diesel fuel results in the drop of noise emission by approx. 2%. It results from the conducted studies, that the use of the fatty acids methyl esters’ additives to the diesel oil does not decrease the performance of the power unit and contributes to limitation of noise’s emission emitted by that engine.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 UTP University of Science and Technology, Faculty of Mechanical Engineering, 7 Al. prof. S. Kaliskiego, 85-796 Bydgoszcz, Poland





