Abstract

Considering friction heat generation between rotating tool and workpiece and plastic deformation heat generation of material, a numerical simulation model of friction stir welding of 7075 aluminium alloy sheet was established. In this study, the temperature field of the welding process was analysed, and the effects of different stirring speeds and welding speeds on the temperature field were compared. The results show that the high temperature region is located below the shoulder and diffuses outward in a ring shape. After the welding is completed, the workpiece center temperature is high and the ambient temperature is low. The stirring speed of the tool has a large effect on the peak temperature during the welding process. The effect of the welding speed on the peak temperature is less than the stirring speed. The comparison shows that the welding temperature is about 478°C at a stirring speed of 800r/min and a welding speed of 120mm/min, which is a suitable welding parameter.

Details

Title
The Numerical Simulation of Temperature Field in Friction Stir Welding of 7075 Aluminium Alloy
Author
Ma, F J 1 ; Fu, D Y 1 ; Liu, Y 1 ; Yang, D P 1 ; Zhang, S F 1 ; Sha, Z H 1 

1  School of Mechanical Engineering, Dalian Jiaotong University, No. 794, Huanghe Road, Shahekou District, Dalian 116028, China 
Publication year
2020
Publication date
Jan 2020
Publisher
IOP Publishing
ISSN
17578981
e-ISSN
1757899X
Source type
Scholarly Journal
Language of publication
English
DOI
https://doi.org/10.1088/1757-899X/751/1/012081
ProQuest document ID
2562049996
Copyright
© 2020. This work is published under http://creativecommons.org/licenses/by/3.0/ (the “License”). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.