It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
We used a commercial TCAD tool in order to simulate a cylindrical Textile Organic Field Effect Transistor (TOFET) and study the impact of different critical region sizes in its electrical characteristics. The simulation was based on models and parameters similar to those of previous simulations in Organic Thin Film Transistors. We have seen that it is potentially feasible to build transistors which can operate in low voltages by using typical materials. Even if some of the selected typical materials have to be replaced by others more suitable for practical use in the textile industry, the simulation is a good starting point for estimating the device typical operation and parameters. By optimizing critical region sizes of the device we conclude that the device should have an active layer thickness below 100 nm, channel length around 10μm and gate oxide thickness as small as possible (300 nm or less), in order to have optimum transistor performance.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Aristotle University of Thessaloniki, School of Physics, Department of Solid State Physics, University Campus, 54124, Thessaloniki, Greece; Piraeus University of Applied Sciences, School of Engineering, Department of Textile Engineering, 250 Thivon & P. Ralli Str., 12244, Egaleo, Greece
2 Aristotle University of Thessaloniki, School of Physics, Department of Solid State Physics, University Campus, 54124, Thessaloniki, Greece
3 Piraeus University of Applied Sciences, School of Engineering, Department of Textile Engineering, 250 Thivon & P. Ralli Str., 12244, Egaleo, Greece
4 Ghent University, Faculty of Engineering and Architecture, Department of Textiles, Technologiepark 907, 9052 Zwijnaarde (Gent), Belgium