It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
CO2 minimum miscibility pressure (MMP) is an important parameter in CO2 enhanced oil recovery (CO2-EOR) process. The CO2 injection must be conducted at the pressure equal or greater than MMP. The aim of this study is to determine CO2 MMP by using one-dimensional CMG simulation model and CO2 MMP correlations on L reservoir. To make an accurate simulation model and to choose the most satisfying correlation, it is necessary to validate by comparing the obtained CO2 MMP with experiments in the laboratory on eight type oil from various fields. The result showed that Zhang’s correlation is the best correlation which have -13.9% average percentage of errors while using the CMG simulation model shows the average percentage errors approximately -6.5 %. Using Zhang’s correlation, CO2 MMP on L reservoir is about 3166 psia and from CMG simulation, CO2 MMP equals to 3219 psia.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Petroleum Engineering Department, Faculty of Earth Science and Energy, Universitas Trisakti, Indonesia