It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
The world has been alarmed with the global warming effects. Global warming has been a distress towards the environment, thus shorten the Earth’s lifespan. It is a challenging task to reduce the global warming effects in a short period, knowing that the human population is increasing along with the electricity and energy demand. In order to reduce the effects, renewable energy is presented as an alternative method to produce energy in a way that will not harm the environment. Oil palm is one of the agricultural crops that produces huge amount of biomass which can be processed and used as a renewable energy source. In 2016, Malaysia has reported over 5 million hectares of land were covered by oil palm plantations. Placing Malaysia as the second largest country of oil palm producer in the world has given it an advantage to produce renewable energy source. However, there is a need to monitor the sustainability of oil palm plantations in Malaysia via effective mapping approaches. This study utilised two different platforms (open source and commercial) using a machine learning algorithm namely Support Vector Machine (SVM) to perform oil palm mapping. An open source Python programming-based technique utilising Scikit-learn module was performed to map the oil palm distribution and the result produced had an overall accuracy of 91.39%. To support and validate the efficiency of the Python programming-based image classification, a commercial remote sensing software (ENVI) was used and compared by implementing the same SVM algorithm and the result showed an overall accuracy of 98.21%.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Department of Civil Engineering, Faculty of Engineering, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia; Department of Civil Engineering, Faculty of Engineering, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia
2 Department of Civil Engineering, Faculty of Engineering, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia; Department of Civil Engineering, Faculty of Engineering, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia; Geospatial Information Science Research Centre (GISRC), Faculty of Engineering, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia
3 Department of Chemical and Environmental Engineering/Sustainable Process Engineering Research Centre (SPERC), Faculty of Engineering, Universiti Putra Malaysia, 43400, UPM Serdang, Selangor, Malaysia; Department of Chemical and Environmental Engineering/Sustainable Process Engineering Research Centre (SPERC), Faculty of Engineering, Universiti Putra Malaysia, 43400, UPM Serdang, Selangor, Malaysia
4 Department of Chemical Engineering, University of Bath, Claverton Down, BA2 7AY, United Kingdom; Department of Chemical Engineering, University of Bath, Claverton Down, BA2 7AY, United Kingdom