Corrigendum to “A Novel Approach for Fabricating LaMnO3 Thin Films Using Combined Microwave Combustion and Pulsed Electron Deposition Techniques”

This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

In the article titled “A Novel Approach for Fabricating LaMnO3 Thin Films Using Combined Microwave Combustion and Pulsed Electron Deposition Techniques” [1], concerns with Figure 3 were raised on PubPeer [2]. Specifically, Figures 3(a) and 3(b) [1] appear identical to Figures 3(a) and 3(b) in the authors’ previously published article [3]. The authors state that the images in Figures 3(a) and 3(b) [1] were mistakenly included due to an error in the article preparation. The correct images are included as follows. This change does not impact the conclusions of this article.

[figures omitted; refer to PDF]

References

[1] T. H. Tran, T. Tang, N. H. Pham, T. C. Bach, C. D. Sai, Q. H. Nguyen, V. V. Le, H. N. Nguyen, Q. K. Doan, T. T. Nguyen, V. B. Le, K. Ho, V. T. Nguyen, "A novel approach for fabricating LaMnO 3 thin films using combined microwave combustion and pulsed electron deposition techniques," Journal of Chemistry, vol. 2019,DOI: 10.1155/2019/3568185, 2019.

[2] H. flavolivaceus, "A novel approach for fabricating LaMnO 3 thin films using combined microwave combustion and pulsed electron deposition techniques," Pubpeer, 2020. https://pubpeer.com/publications/35AA6B416A5982053799B1872E128F

[3] T. H. Tran, T. C. Bach, N. H. Pham, Q. H. Nguyen, C. D. Sai, H. N. Nguyen, V. T. Nguyen, T. T. Nguyen, K. H. Ho, Q. K. Doan, "Phase transition of LaMnO 3 nanoparticles prepared by microwave assisted combustion method," Materials Science in Semiconductor Processing, vol. 89, pp. 121-125, DOI: 10.1016/j.mssp.2018.09.002, 2019.