Full text

Turn on search term navigation

© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.

Abstract

Two aspects of various steels’ weldability are considered in this article. The theoretical part presents general concepts related to steel’s weldability and the application of the most important methods for its determination. In the experimental section, results of the hard-facing application to several samples are presented, and consist of hardness measurements in the different zones of the welded samples, with the evaluation of those zones’ microstructures. The tested materials included two carbon steels and two alloyed steels, with hard-facing layers deposited by various filler metals. Experimental results were compared to results obtained by calculations; using both, authors were able to conclude which combination of filler metal, welding procedure and, if necessary, heat treatment, would achieve the optimal improvement of weldability in welding/hard-facing of each of the tested base metals.

Details

Title
Weldability Assessment of Various Steels by Hard-Facing
Author
Arsić, Dušan 1   VIAFID ORCID Logo  ; Lazić, Vukić 1 ; Nikolić, Ružica R 2   VIAFID ORCID Logo  ; Sczygiol, Norbert 3 ; Krstić, Božidar 1 ; Ivković, Djordje 1   VIAFID ORCID Logo  ; Hadzima, Branislav 2   VIAFID ORCID Logo  ; Pastorek, Filip 2 ; Ulewicz, Robert 4   VIAFID ORCID Logo 

 Faculty of Engineering, University of Kragujevac, Sestre Janjić 6, 34000 Kragujevac, Serbia; [email protected] (D.A.); [email protected] (V.L.); [email protected] (B.K.); [email protected] (D.I.) 
 Research Centre, University of Žilina, Univerzitna 8215/1, 010 26 Žilina, Slovakia; [email protected] (B.H.); [email protected] (F.P.) 
 Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, 42201 Czestochowa, Poland; [email protected] 
 Department of Production Engineering and Safety, Czestochowa University of Technology, 42201 Czestochowa, Poland; [email protected] 
First page
3082
Publication year
2022
Publication date
2022
Publisher
MDPI AG
e-ISSN
19961944
Source type
Scholarly Journal
Language of publication
English
ProQuest document ID
2663054943
Copyright
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.