Efficiency evaluation of commercial banks in Pakistan: A slacks-based measure Super-SBM approach with bad output (Non-performing loans)

Abstract

According to recent figures from the State Bank of Pakistan (SBP), since 2006, commercial banks’ non-performing loans (NPLs) have significantly risen. To this end, the primary objective of this research is to explore the impact of NPLs on the operational efficiency of commercial banks in Pakistan. NPLs were incorporated as bad output in the efficiency estimation of 24 CBs for the period 2006–2017. This study employs the data envelopment analysis (DEA) Super-SBM with the undesirable output for the efficiency evaluation of CBs. To test the robustness of our results, we used two different input-output bundles (model A and model B). The findings show a significant difference exists between the results estimated with and without undesirable output. Furthermore, the results of super-efficiency estimation rank the most efficient CB for the study period and distinguish it from other efficient DMUs. Models A and B show that foreign banks are always more efficient than domestic banks, while private CBs have higher efficiency scores than public CBs in domestic banking. In addition, the big five CBs show mixed findings, as in model A, they were more efficient than other domestic CBs, while in model B were less efficient. In the second stage of the empirical study, we use the system GMM to examine the impact of NPLs, bank size, and net interest margin on CBs efficiency. We discovered that NPLs have a negative and significant effect on banking efficiency, whereas bank size and net interest margin positively affect the efficiency of commercial banks in Pakistan.

Abstract

According to recent figures from the State Bank of Pakistan (SBP), since 2006, commercial banks’ non-performing loans (NPLs) have significantly risen. To this end, the primary objective of this research is to explore the impact of NPLs on the operational efficiency of commercial banks in Pakistan. NPLs were incorporated as bad output in the efficiency estimation of 24 CBs for the period 2006–2017. This study employs the data envelopment analysis (DEA) Super-SBM with the undesirable output for the efficiency evaluation of CBs. To test the robustness of our results, we used two different input-output bundles (model A and model B). The findings show a significant difference exists between the results estimated with and without undesirable output. Furthermore, the results of super-efficiency estimation rank the most efficient CB for the study period and distinguish it from other efficient DMUs. Models A and B show that foreign banks are always more efficient than domestic banks, while private CBs have higher efficiency scores than public CBs in domestic banking. In addition, the big five CBs show mixed findings, as in model A, they were more efficient than other domestic CBs, while in model B were less efficient. In the second stage of the empirical study, we use the system GMM to examine the impact of NPLs, bank size, and net interest margin on CBs efficiency. We discovered that NPLs have a negative and significant effect on banking efficiency, whereas bank size and net interest margin positively affect the efficiency of commercial banks in Pakistan.

Citation: Shah WUH, Hao G, Yan H, Yasmeen R (2022) Efficiency evaluation of commercial banks in Pakistan: A slacks-based measure Super-SBM approach with bad output (Non-performing loans). PLoS ONE 17(7): e0270406. https://doi.org/10.1371/journal.pone.0270406

Editor: Saeed El-Ashram, Foshan University, CHINA

Received: January 19, 2022; Accepted: June 10, 2022; Published: July 12, 2022

Copyright: © 2022 Shah et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Data Availability: https://www.sbp.org.pk/publications/Pub-Ann.htm.

Funding: This study is sponsored by the Talent person recruitment project of Zhejiang Shuren University (KXJ0121610). RGC (Research Grant Council) of the Hong Kong SAR Government (project #: 9042713). The funders had no role in study design, data collection, analysis, decision to publish, or manuscript preparation.

Competing interests: The authors have declared that no competing interests exist.

1. Introduction

Pakistan’s commercial banking industry witnessed a consistent increase in its Assets and profitability from the last two decades, as total assets of the banking sector grew from Rs 22,120.46 billion in 2019 to Rs 25,069.06 billion in 2020, showing an increase of 13.33 percent [1]. Amin (2007) [2] argues that government liberalization and privatization policy does not improve the financial health of CBs in Pakistan due to over-employment and debt burden. Commercial banks play a critical role in the financial sector by supplying funds to achieve economic development goals [3]. Schumpeter [4] recognized that commercial banks are essential sources of long-term financial investments. CBs are the backbone of the banking system because they are a major source of lending capital to the private sector [5]. The developed financial sector has massive potential to improve and sustain the economic growth of any country or region [6]. Indeed, these commercial banks contribute widely to financial capital mobilization in any economy. To maintain the banking system’s stability, operational efficiency is essential in keeping the CBs profitable and healthy, as Belke et al. (2016) [7] argue that more efficient CBs foster regional economic growth.

The performance of CBs is critical in proposing policy-making for decision-makers. There are numerous techniques used to measure the performance of CBs; two renowned methods for efficiency evaluation are parametric (stochastic frontier analysis) and non-parametric (data envelopment analysis). DEA is an extensively used technique in evaluating banks around the Globe [8]. Tone (2004) [9] introduced an (SBM) model in DEA, which could incorporate bad output to gauge more accurate efficiency results. Each particular industry has its undesirable outcomes in the production process; usually, CBs consider NPLs as bad output, affecting the efficiency of any specific DMU.

The study of Negera (2012) [10] explains that a low ratio of Non-performing loans (NPLs) provides solidity in any economy’s financial system, as NPLs can reduce the lending capacity of CBs, which causes a lack of financial support to many potential projects. Further, it influences bank profitability as loans are the primary source of revenue for any CB, and large NPLs can reduce the liquidity of bank funds. NPLs can affect the whole market economy [11, 12]; therefore, they are essential in commercial bank efficiency. Partovi & Matousek [13] demonstrated that, on average, CBs with a higher rate of NPLs are less efficient in the Turkish banking industry. Numerous research studies described the importance of NPLs in banks’ performance and proved that NPLs negatively impact the efficiency of CBs because they deteriorate asset quality [14, 15]. Few Studies used NPLs as a control variable in their performance analysis [16–18]. In comparison, most researchers used NPLs as bad output in their DEA models [19–23].

In the recent decade (2006–2017), NPLs of Pakistan’s commercial banking industry increased rapidly, as they grew to .582 billion in 2017 from .175 billion in 2006 (see Fig 1).

[Figure omitted. See PDF.]

Further elaborating the different commercial banking sectors, it was witnessed that 97.5% of total NPLs were borrowed from local banks in the year 2006, which increased to 99.5% in 2017, while the percentage of NPLs taken from foreign banks was only 0.5% in 2017. Local CBs comprise public and private CBs; statistics indicate that at the end of 2017 share of private CBs in NPLs of Local banks was 62.5%; Public CBs count for 31.2% while reaming 6.3% of NPLs were taken from specialized banks (see Fig 2). This phenomenon indicates the constant pressure of growing NPLs on Pakistan’s commercial banking, which could affect the operational efficiency of CBs. Literature advocates that although many studies (see Table 1) evaluate the efficiency and productivity of Pakistan’s commercial banking industry over different periods. None of the researchers incorporates the NPLs as bad output in their DEA input-output bundles and evaluates the impact of NPLs on the efficiency of CBs. Karou [24] explains that without considering undesirable output in the performance evaluation process could affect the efficiency scores of DMUs. Therefore, enormous growth in the NPLs of the Pakistan banking industry has great concern not only for central bank authorities but also for investors and stockholders of private CBs. Further bank size and net interest margin are also critical contextual variables that impact the banking efficiency of the financial sector in any economy.

[Figure omitted. See PDF.]

[Figure omitted. See PDF.]

To this end, our research contributes to the literature in several ways; firstly, it incorporates the NPLs in the efficiency estimation of CBs to gauge the impact of bad-output. Secondly, the super-efficiency model (SBM) will distinguish and rank the most efficient DMU in Pakistan’s commercial banking for 12 years (2006–2017). Thirdly this research explains whether changing the input-output bundles affect the super efficiency scores of evaluated DMUs. Fourthly, this research differentiates commercial banking sectors (public, private and foreign CBs), elaborates the most efficient sector, and further separates the efficiency of big 5 CBs from other domestic CBs. Finally, system GMM reveals the association of NPLs, bank size, and net interest margin with CBs efficiency. The rest of the paper is organized as section 2 explains the study’s brief, relevant literature; Section 3 describes the methodological part, data, and models selection. While results discussion and conclusion are presented in sections 4 and 5, respectively.

2. Literature review

The study by Charnes [25] introduced a non-parametric technique to measure the relative efficiency of different decision-making units (DMUs), known as data envelopment analysis (DEA). Their conventional model (CCR) with the constant return to scale assumption was further modified by Banker [26] with the variable return to scale known as (BCC). Numerous researchers used DEA for the performance evaluation of CBs in different parts of the world.

2.1 Banking efficiency

Sherman & Gold [27] were the first to use DEA in the US banking industry to measure the relative efficiency scores of different bank branches. Later on, researchers frequently used conventional (CCR, BCC) models to measure the efficiency in various banking industries around the Globe. Different input-output bundles were used to measure the technical efficiency of several CBs in the USA during (1983–1990) [28–34]. Miller & Noulas [35] applied DEA to evaluate the technical efficiency of 201 commercial banks in the USA between 1984 and 1990 and found that larger and profitable banks are more efficient. However, larger banks are more likely to operate under decreasing return to scale. Berger & Humphrey [15] provide a review of 130 financial institutions, including commercial banks. Following the model proposed by Anthanassopoulos [36], Grifell et al. [37], and Soteriou et al. [38] also studied the productivity and cost-efficiency of CBs. DEA was applied to measure the efficiency of 55 US CBs and revealed that big banks show better performance in terms of profitability while small banks show a better position concerning marketability [39]. A study by Drake [40] measured the efficiency and productivity growth of UK commercial banks and proved that large banks are more X-efficient than their small counterparts. Neal [41] evaluates the efficiency of the Australian banking industry for a specific period and argues that CBs exhibit higher allocative efficiency than technical efficiency. An intermediate approach of input-output selection to measure the efficacies of CBs in developing economies was adopted by [42–46]. Chang et al. [47] measure the efficiency of 20 Chinese state-owned commercial banks and found that their efficiency level is 81 percent; further, service quality positively impacts efficiency and customer satisfaction. Novickytė & Droždz [48] evaluated Lithuanian CBs using the DEA input-oriented model with VRS and CSR assumptions and found that CBs owned by Nordic groups are more efficient than local CBs. Different studies were also conducted for efficiencies estimation of CBs in growing economies of the European Union [49–56].

2.2 Non-performing loans and banking efficiency

In the production economies, it is usually assumed that a production unit producing good output will uncontrollably have some bad output [57]. Different DEA models had been proposed to handle the desirable and undesirable output in any production process of a particular industry or sector [58–60]. However, these models have some shortcomings as they transform the bad-output into good and perform the efficiency analysis or input-output oriented. Further radial models ignore the slacks while dealing with undesirable. Therefore, Tone [24] modified its non-oriented, non-radial SBM model Tone [61], extended it with undesirable output, and proposed the SBM-NS model, covering all efficiency measures. Bad outputs yields during the production process vary from industry to industry; usually, the renowned bad output is CO2 omission in industrial production. However, bad outputs in service-oriented sectors are different. Bad service quality and customer complaints are also considered bad output and controllable through better training, operational strategies, and improved performance [62]. Banks produced two types of loans, good and bad (non-performing). Commercial loans are considered non-performing if the borrower is 90 days past the due date. In the commercial banking industry, NPLs are regarded as undesirable output, which influences the efficiency and profitability of CBs. Numerous studies advocate that NPLs are negatively correlated with the stability and efficiency of CBs in different regions of the Globe [14, 15]. Further in the CBs performance evaluation, omitting NPLs from the input-output bundle of the DEA model provides biased efficiency scores [63, 64]. Park & Weber [65] argue that NPLs should be included as a bad-output in the production process to get more authentic and accurate efficiency results.

Considering the importance of NPLs in efficiency evaluations, many researchers incorporate NPLs in their input-output bundles and measure the efficiency of CBs in different countries of the world. Partovi & Matousek [13] used NPLs as undesirable output in their DEA analysis on 44 CBs of Turkey for the year (2002–2014) and explain that NPLs negatively impact bank efficiency and further differentiate the efficiency level ownership structure of the Turkish banking industry. Wang et al. [66] took NPLs as a bad output in their DEA network Model applied on 16 Chinese CBs (2003–2011) and revealed that the overall efficiency of Chinese CBs has improved after the reforms State-owned CBs are most efficient among all. Fukuyama & Weber [22] develop a dynamic network DEA model to measure the efficiency of Japanese CBs and incorporate NPLs as bad output in their proposed model to estimate the inefficiencies of CBs for a specific period. Hajialiakbari et al. [21] measured the effect of NPLs on the technical efficiency of Iranian government banks. They concluded that NPLs have a non-linear negative impact on the TE of state-owned CBs. Barros [67] evaluated the efficiency of Japanese CBs for the years (2002–2007) and included undesirable output in the estimation process, and revealed that NPLs (bad-output) are the burden on the performance of CBs in Japan. Many other studies also included NPLs as undesirable output in their efficiency evaluation of CBs [68, 69].

Conventional DEA models do not rank the efficient DMUs, while efficiency results often show more than one efficient DMUs. Andersen [70] proposed a DEA model to rank the efficient units (DMUs). Later, Tone [61] introduced a slack-based measure (SBM) and further modified slack base measure for super-efficiency [71]. Tone [24] presented a revised model for more precise efficiency estimation incorporating the undesirable outputs in the Super-SBM. Noura et al. [72] proposed a more effective DEA super-efficiency model and divided the inputs and outputs into desirable and undesirable. Zimková [73] estimates the technical and super efficiency of CBs in Slovakia using BCC, SBM, and Super SBM. Literature advocates that numerous research studies used Super-SBM to measure the efficiency of CBs in different parts of the world [74–76].

2.3 Banking efficiency in Pakistan

Pakistan’s commercial banking industry mainly consists of local and foreign banks. Local banks are further divided into public, private, and specialized banks. Banking statistics show that return on equity (ROE) increased from 13.27 percent in fiscal year 2019 to 16.99 percent in the fiscal year 2020, while return on assets (ROA) increased from 0.83 percent in the fiscal year 2019 to 1.07 percent in the fiscal year 2020. Many researchers have estimated efficiencies (cost, operational, technical, profit, and revenue) of CBs in Pakistan. SBP [1] explains the continued growth of NPLs in the commercial banking industry of Pakistan for the 12 years (2006–2017) (see Figs 1 & 2). However, the literature of efficiency estimation (see Table 1) indicates that none of the researchers incorporated the NPLs in their DEA models nor applied the super-SBM model to benchmark the efficient DMU in the banking industry. Further, although past studies proved that bank size is positively associated with banking efficiency, no research distinguishes the efficiency of big 5 Pakistani CBs from remaining domestic CBs.

2.4 Association of NPLs, bank size and net interest margin with banking efficiency

Kwan et al. [94] argued that none performing loans play an important role in banking inefficiency. Further, through empirical analysis, they proved that a significant negative relationship between the NPLs and cost efficiency of CBs exists. In addition, more researchers demonstrated that banks inefficiency is correlated with NPLs [95–97]. NPLs have a negative and significant impact on banking efficiency; a decrease in NPLs level improves the growth of cost efficiency of CBs in Malaysia and Singapore [98]. Stephen [99] used data of 16 CBs for years (2007–2015) and found that bank profitability is negatively associated with NPLs. Further studies emphasize that banking efficiency is positively associated with the scale of banks [100–102]. Similarly, Kovner et al. [103] concluded that bank sizes in the US positively impact cost efficiency. At the same time, many other studies proved that bank size positively and significantly influences the operational efficiency of banks and financial institutions [104–106]. Past studies advocate that bank size is usually measured through the total Assets of that particular bank. Samsonova [107] argues that net interest margin is the best financial indicator of firm performance and is significantly related to banks’ operational efficiency. Bandaranayake [108] took NIM as an efficiency indicator to determine the factor influencing bank efficiency in Sri Lankan banking; however, not much literature was found that measures the association of super efficiency of commercial banking with NPLs, bank size, and NIM.

3. Data and methodology

DEA is a popular efficiency estimation technique because it doesn’t make any assumptions about the shape of the frontier surface or how a DMU’s internal operations work. DEA is extensively used to gauge the operational efficiency of financial institutions, particularly banks.

3.1 Super-SBM with undesirable output

Unlike conventional CCR and BCC models, Tone [61] SBM model directly puts slacks into the objective function to counter the input-output slacks problem. SBM is a non-radial non-oriented model; it avoids the radial and oriented deviation and gauges the most authentic efficiency results. Efficiency estimation from the conventional DEA model reveals that usually, there are more than 1 DMUs that score unity; therefore, efficient units cannot be distinguished. To handle this issue, Tone [71] proposed a Super-SBM model, where the efficiency score of efficient DMUs could exceed one and rank them accordingly. Every production unit yields controllable and uncontrollable undesirable outcomes along with good outputs. In modern banking systems, NPLs are considered as bad output. This study uses the Super-SBM model with undesirable output based on research by [109], to check the effect of NPLs on the efficiency evaluation of 24 CBs in Pakistan.

. The matrices X, Y^g, Y^b are defined as follows

Assume that, X > 0, Y⁸ > 0, Y^b > 0. Then the production possibility set P is defined by P = {(x, y^g, y^b) | x ≥ xλ, y^g ≤ y^gλ, y^b ≥ y^bλ, λ ≥ 0}

A specific DMU is expressed as

The vectors and Present slacks in inputs, good outputs, and bad outputs, respectively. M, s₁ and s₂ show the number of factors for inputs, good outputs and bad outputs. "S⁻" Indicates that the actual input resource is more than frontier investment. "S^g" Shows that the good output produced in the actual operation is less than frontier desirable output. "S^b" means that the actual undesirable output level is greater than the leading edge of the undesirable output level. λ is the intensity vector. In the presence of bad output, DMU is only SBM-efficient if and only if there are no excessive input, no insufficient desirable output, and no surplus undesirable outputs, i.e.

We discuss the super-efficiency issues under the assumption that the DMU is SBM-efficient. The production possibility set P′is defined by excluding from (X, Y^g, Y^b), as follows:

The subset of P′ is defined as

The following expression shows how Super-SBM deals with undesirable output [61, 109].

(1)

Subject to(2)

This study uses Super-SBM DEA Model with undesirable output under constant return to scale (CSR) assumption.

3.2 Selection of inputs and outputs

The selection of inputs and outputs variable in DEA is a matter of great concern for researchers. Literature advocates that two approaches are mostly used to measure commercial bank efficiency, namely the production and intermediate approach. Banks are considered service providers in the production approach, where they emphasize operating costs and count deposits as output without considering interest expenses paid on deposit collection. On the contrary, the intermediation approach used deposits as an input variable to produce more bank assets, while all operating costs and interest expenses were used as input. Berger et al. [15] suggest that the production approach is more applicable in branch-level data, while intermediation approaches for bank-level data. Using the intermediation approach, we adopt two different input-output bundles from previous studies of [42, 110] and named them Model A, B in this research. Model A contains two inputs interest expenses, non-interest expenses, and two outputs, net interest income and non-interest income. In contrast, model B includes deposits and the number of employees as inputs, while net loans and non-interest income are output variables. In addition, NPLs were taken as an undesirable output in both Models (see Table 2).

[Figure omitted. See PDF.]

Non-radial and non-oriented Super-SBM model with the assumption of constant returns to scale was employed to estimate the super efficiency scores of 24 CBs, including four public, 18 private, and 2 foreign banks, Max DEA ultra (7.0) was used for data analysis. At the same time, all the data was taken from the financial analysis of Pakistan banking reports (SBP), and the unit was thousand Pakistani Rupees. Descriptive statistics of all the variables are given in Table 3.

[Figure omitted. See PDF.]

3.3 Econometric model

Given the importance of banking efficiency and non-performing loans, the following model is composed as:(3)Where (BE)) indicates the set of banking efficiency of both models. Bank size is denoted by Bank_Size, Net interest Margin is signified by NIM, and NPL is non-performing loans.

In Eq (3), the Generalized Method of Moments (GMM) with two-step is applied for the long-run impact of the concerned variables. The GMM is the best choice with a small-time span (T) and large cross-sections (N) [111]. Moreover, selecting a two-step GMM is more appropriate than the one-step system GMM due to heteroscedasticity and autocorrelation [112, 113]. Furthermore, the beauty of system GMM methods is the independent distribution of the error terms and serially uncorrelated. The lagged values of the variables can use as instruments based on the nature of the variables. The competence of the GMM model can be verified with two diagnostic tests. One is the joint validity of the lagged instrumental variables certified by running the Sargan/Hansen test. Second, the Arellano-Bond test is applied to check for serial correlation in the differenced equations.

4. Results and discussion

Section 4.1 presents the super efficiency scores estimated through two different input-output bundles. In contrast, section 4.2 presents an efficiency comparison of Big 5 CBs with other domestic CBs, while section 4.3 presents the econometric results of the model constructed to check the impact of NPLs, bank size, and net interest margin on the banking efficiency of Pakistan.

4.1 Efficiencies results of both model A and B

Table 4 present the results of model A, which indicate the mean efficiency score (considering NPLs) for 12 years (2006–17) is .597 while (without considering NPLs) is 0.510, which suggests that CBs are operating in Pakistan still needs to improve their efficiency level. Moreover, a considerable difference exists among mean efficiency scores calculated considering and without considering NPLs (undesirable output) in the efficiency estimation (see Fig 3). A sector-wise analysis shows us that efficiency scores estimated through incorporating NPLs in Input-Output bundle, foreign CBs perform better than domestic. At the same time, private CBs got better score than public sector CBs (Foreign CBs >Private CBs>Public CBs) = (1.26 >0.554 >0.454). Results indicate that ignoring the NPLs in the efficiency estimation process doesn’t change the mean efficiency level of different sectors of Pakistan CBs; however, mean efficiency scores changed (Foreign CBs >Private CBs>Public CBs) = (1.141 >0.459 > 0.424). Further, it was noticed that DB AG (a foreign CB) was the most efficient CB among all 24 CBs. BAH was ranked one among private, while NBP in public CBs. DB AG (foreign) and NBP (public) don’t change their position when we ignore undesirable output. However, BAH (private) didn’t sustain its position and jumped on to 16th position among all 24 CBs replacing MCB, ranked 1^st in private CBs.

[Figure omitted. See PDF.]

[Figure omitted. See PDF.]

Table 5 present the results measured through Model B, which indicate the mean efficiency score (considering NPLs) for 12 years (2006–17) is 0.602 while (without considering NPLs) is 0.452, which suggests that CBs operating in Pakistan still operate inefficiently and needs to improve their operational efficiency level. Further results indicate a considerable difference (15%) among mean efficiency scores calculated considering and without considering (bad output) NPLs (see Fig 4). Similar to model A, model B reveals that whether we ignore or consider NPLs in the efficiency estimation process, CBs’s sector-wise position doesn’t change much. As considering bad output (Foreign CBs >Private CBs >Public CBs) = (1.181 >0.581 > 0.405) while ignoring bad output (Foreign CBs >Private CBs >Public CBs) = (1.144 >0.411 > 0.29), clearly indicating that mean efficiency scores were changed while including the NPLs in outputs of Model B. Ranking the most efficient CB of each sector, it was noticed that considering NPLs as bad output, DB AG (foreign CB) was the most efficient among all 24 CBs. BAH and NBP were top for the private and public sectors. When NPLs were ignored, BAH changed its position to 22, and FBL was ranked 1^st among Private CBs; however, DB AG and NBP retained their positions.

[Figure omitted. See PDF.]

[Figure omitted. See PDF.]

Efficiency results estimated through two different input-output bundles demonstrated that changing the inputs-outputs bundles doesn’t change the position (rank) of different commercial banking sectors and oppose the research results by [42] in Pakistan banking setup. However, there is considerable variation in annual mean efficiency scores calculated from 2 different inputs-outputs bundles. In addition, the top-ranked CB of each sector doesn’t change its position except private CBs, which have a higher level of NPLs than foreign or public CBs (see Fig 2), showing the impact of bad output on efficiency level.

4.2 Efficiency comparison of Big 5 CBs with other domestic CBs

The top market share of the banking sector in Pakistan is controlled by five big banks (HBL, NBP, UBL, MCB, and ABL). These five banks account for 56% of the country’s deposits and 52% of the country’s banking industry’s advances. Table 6 shows the efficiency comparison of Big 5 CBs with 17 other domestic CBs. Results of super-efficiency estimated through model A shows that Mean efficiency scores (irrespective of undesirable output) of big 5 are higher than all other 17 CBs, (0.686 >0.492) (0.687 >0.382). However, Model B presents the converse results, where the mean efficiency of big 5 CBs is less than the other 17 domestic CBs (0.478<0.57) (0.372<0.394).

[Figure omitted. See PDF.]

4.3 Impact of NIM, Bank size and NPLs on the efficiency of Pakistan’s CBs

After efficiency analysis, we have applied the system GMM with two steps to make our study more comprehensive and conclusive, regrinding the concerned variables’ impacts. The standard diagnostic tests (AR (1), AR(2), Hansen tests) are also included to ensure that the applied method is suitable for the study. Further, the joint validity of the lagged instrumental variables is certified by the Hansen values. Second, the diagnostic tests reveal no significant evidence of serial correlation in the first-differenced errors at order 2. Typically, undesirable output has been ignored while estimating the banking efficiency. But, the present research incorporated the undesirable output in determining the banking efficiency and regressed the regression to confirm the robustness of the findings. The results extracted from Eq (3) are reported in Table 7. Banking efficiency has been measured in two ways using different measures as mentioned in section (2). Model (1) showed that bank size positively contributes to increasing Pakistan’s banking efficiency as the coefficient (0.327) is statistically positive and significant at a 1 percent level. The positivity of bank size to increase banking efficiency is consistent with [114, 115], who stated that bank size is essential for determining banking efficiency.

[Figure omitted. See PDF.]

Likewise, we found that the net interest margin significantly increases banking efficiency. The results implied that the net interest margin is the potential measure to uplift the level of efficiency of the Pakistani banking industry. [116] suggested that net interest margin is the utmost appropriate criterion for assessing the stability of banks’ operations.Net interest margin, which is the difference between banks’ lending and deposit rates, is the essential and primary indicator in the financial system [117, 118].

On the other hand, non-performing loans and banking efficiency are negatively linked in columns (1). It means that non-performing loans degrade the efficiency level of the Pakistani banking industry. Our results are validated by [119, 120], who stated that the non-performing loans probably induce the inefficiency of the banking industry. Further, [98, 121] made arguments that grating non-performing loans is the result of bad management that affects the banking efficiency level. Because of poor evaluation services, bankers do not perform their duties efficiently. They might not correctly evaluate the customers’ credit applications, leading to lower credit ratings for the approved loans and a high chance of defaulting in arrears to higher non-performing loans. We regressed the concerned explanatory variables on the other two banking efficiency variables for robustness. The results of model (2) are reported in Table 6, which validated that bank size and net interest margin are positive parameters to improve Pakistan’s banking efficiency. However, non-performing loans are found to be detrimental to banking efficiency in Model (2).

5. Conclusion and policy implication

This research aimed to treat NPLs as an undesirable output in the efficiency evaluation of commercial banks, gauge the change in result output, and further differentiate the efficiency level among three different banking sectors (public, private and foreign) of Pakistan. In addition, efficiency comparison of big 5 CBs with other domestic CBs included in the research to distinguish the efficiency level of big CBs from others reaming. To this end, we applied the DEA Super-SBM model incorporating NPLs as bad output, with two different input-output bundles, namely model A and B. 24 CBs of Pakistan were evaluated for 12 years, ranging from 2006-to 2017. To prove the creditability of our results, in the second stage of our analysis, we applied system GMM to regress banking efficiency on NPLs, bank size, and NIM. Results indicate that for both models, there is considerable change noticed in super efficiency scores estimated through incorporating NPLs in input-output bundles of CBs, compared to the efficiency scores measured without incorporating NPLs in input-output bundles. Model A and B indicate that foreign banks are always more efficient than Local Banks, while private banks have greater efficiency scores than public banks in domestic banking.

Moreover, five big CBs reveal mixed results, as in model A estimation, they were more efficient than other domestic CBs. In contrast, they were less efficient in model B than their counterparts. System GMM results proved that NPL is negatively and significantly associated with CBs efficiency in the second stage of empirical analysis. Bank size and net interest margin are positively associated with CBs efficiency. Because of poor evaluation services, bankers do not perform their duties efficiently. They might not properly evaluate the customers’ credit applications, leading to lower credit ratings for the approved loans and a high chance of defaulting in debts to higher non-performing loans. Therefore, it is advised to the managers and policymakers of CBs that after minimizing the NPLs ratio, they could make their banks more efficient and stable. Domestic CBs (public, private) are suggested to follow the operational strategies of foreign banks as they are most efficient among all. Although NPLs ratio of private banks is higher than public CBs, they are more efficient than public CBs, suggesting that public CBs need to improve their income level and reduce cost through improved operational strategies and better service quality. As bank size also improves Pakistan’s CBs’s banking efficiency, small CBs can expand their deposit scale to higher operational efficiency. Data availability and time constraint are limitations of our study; after efficiency estimation, more contextual variables could be regressed to explore the effect of those variables on banking efficiency.

Supporting information

S1 Table. List of CBs.

https://doi.org/10.1371/journal.pone.0270406.s001

(DOCX)

Citation: Shah WUH, Hao G, Yan H, Yasmeen R (2022) Efficiency evaluation of commercial banks in Pakistan: A slacks-based measure Super-SBM approach with bad output (Non-performing loans). PLoS ONE 17(7): e0270406. https://doi.org/10.1371/journal.pone.0270406

About the Authors:

Wasi Ul Hassan Shah

Roles: Methodology, Writing – original draft

Affiliation: School of Management, Zhejiang Shuren University, Hangzhou, China

Gang Hao

Roles: Conceptualization

Affiliation: Department of Management Sciences, City University of Hong Kong, Hong Kong, China

Hong Yan

Roles: Formal analysis, Visualization

Affiliation: School of Management, Zhejiang Shuren University, Hangzhou, China

Rizwana Yasmeen

Roles: Writing – review & editing

E-mail: [email protected]

Affiliation: School of Economics and Management, Panzhihua University, Panzhihua, Sichuan China

https://orcid.org/0000-0002-8590-7773

References

1. Bank S. Pakistan FINANCIAL STATEMENTS ANALYSIS OF FINANCIAL SECTOR 2016–2020. State bank of Pakistan 2020, 1, 25–30.

2. Amin, M.K. FINANCIAL LIBERALIZATION AND REFORMS IN PAKISTAN AND KOREA, KDI School, 2007, Vol. 3.

3. Fatema N.; Siddik A.B.; Ibrahim A.M. Efficiency and Productivity of Commercial Banks: Evidence from Bangladesh. North American Academic Research 2019, 2, 190–208,

4. Schumpeter, J.A. The Theory of Economic Development, Harvard University Press. Null 1934.

5. Bertuch-samuels, A. Financial Sector Development–The role of effective local banking structures. 2019.

6. Waheed, A.; Younus, N. Effects of financial sector’s development and financial sector’s efficiency on economic growth: Empirical evidence from developing and developed countries. International Journal of Economic Perspectives 2010.

7. Belke A.; Haskamp U.; Setzer R. Regional bank efficiency and its effect on regional growth in "normal" and "bad" times. Economic Modelling 2016,

8. Emrouznejad A.; liang G Yang. A survey and analysis of the first 40 years of scholarly literature in DEA: 1978–2016. Socio-Economic Planning Sciences 2018, 61, 4–8,

9. Tone, K. Dealing with undesirable outputs in DEA: a Slacks-Based Measure (SBM) approach. 2019.

10. Negera, W. Determinants of Non Performing Loans The case of Ethiopian Banks. Research Report 2012.

11. ROSENGREN, J.P.A.E.S. Unnatural Selection: Perverse Incentives and the Misallocation of Credit in Japan.

12. Watanabe W. Prudential regulation and the "credit crunch": Evidence from Japan. Journal of Money, Credit and Banking 2007,

13. Partovi E.; Matousek R. Bank efficiency and non-performing loans: Evidence from Turkey. Research in International Business and Finance 2019,

14. Mester L.J. A study of bank efficiency taking into account risk-preferences. Journal of Banking and Finance 1996,

15. Berger A.N.; Humphrey D.B. Efficiency of financial institutions: International survey and directions for future research. European Journal of Operational Research 1997,

16. Mester L.J. Measuring efficiency at U.S. banks: Accounting for heterogeneity is important. European Journal of Operational Research 1997,

17. Berger A.N.; DeYoung R. Problem loans and cost efficiency in commercial banks. Journal of Banking and Finance 1997,

18. Podpiera J.; Weill L. Bad luck or bad management? Emerging banking market experience. Journal of Financial Stability 2008,

19. Park K.H.; Weber W.L. A note on efficiency and productivity growth in the Korean Banking Industry, 1992–2002. Journal of Banking and Finance 2006, 30, 2371–2386,

20. Fukuyama H.; Weber W.L. Japanese banking inefficiency and shadow pricing. Mathematical and Computer Modelling 2008,

21. Hajialiakbari F.; Gholami M.H.; Roshandel J.; Hatami-Shirkouhi L. Assessment of the effect on technical efficiency of bad loans in banking industry: A principal component analysis and neuro-fuzzy system. Neural Computing and Applications 2013,

22. Fukuyama H.; Weber W.L. Measuring Japanese bank performance: a dynamic network DEA approach. Journal of Productivity Analysis 2015, 44, 249–264,

23. Fukuyama H.; Matousek R. Modelling bank performance: A network DEA approach. European Journal of Operational Research 2017.

24. Tone, K. Dealing with undesirable outputs in DEA: A slacks-based measure (SBM) approach. GRIPS Research Report Series 2003.

25. Charnes A.; Cooper W.W.; Rhodes E. Measuring the efficiency of decision making units. European Journal of Operational Research 1978, 2, 429–444,

26. Banker R.D.; Charnes A.; Cooper W.W. SOME MODELS FOR ESTIMATING TECHNICAL AND SCALE INEFFICIENCIES IN DATA ENVELOPMENT ANALYSIS. Management Science 1984,

27. Sherman H.D.; Gold F. Bank branch operating efficiency. Evaluation with Data Envelopment Analysis. Journal of Banking and Finance 1985,

28. Rangan N.; Grabowski R.; Aly H.Y.; Pasurka C. The technical efficiency of US banks. Economics Letters 1988,

29. Aly H.Y.; Grabowski R.; Pasurka C.; Rangan N. Technical, scale, and allocative efficiencies in US banking: an empirical investigation. Review of Economics & Statistics 1990,

30. Elyasiani E.; Mehdian S.M. A non-parametric approach to measurement of efficiency and technological change: The case of large U.S. commercial banks. Journal of Financial Services Research 1990,

31. Ferrier G.D.; Lovell C.A.K. Measuring cost efficiency in banking. Econometric and linear programming evidence. Journal of Econometrics 1990,

32. Yue P. Data Envelopment Analysis and Commercial Bank Performance: A Primer with Applications to Missouri Banks. Review 1992,

33. Grabowski R.; Rangan N.; Rezvanian R. The effect of deregulation on the efficiency of U.S. banking firms. Journal of Economics and Business 1994,

34. Sherman H.D.; Ladino G. Managing Bank Productivity Using Data Envelopment Analysis (DEA). Interfaces 1995,

35. Miller S.M.; Noulas A.G. The technical efficiency of large bank production. Journal of Banking and Finance 1996,

36. Anthanassopoulos A.D. Nonparametric Frontier Models for Assessing the Market and Cost Efficiency of Large-Scale Bank Branch Networks. Journal of Money, Credit and Banking 1998,

37. Grifell-Tatjé E.; Lovell C.A.K. Profits and productivity. Management Science 1999,

38. Soteriou A.; Zenios S.A. Operations, quality, and profitability in the provision of banking services. Management Science 1999,

39. Seiford L.M.; Zhu J. Profitability and marketability of the top 55 U.S. commercial banks. Management Science 1999,

40. Drake L. Efficiency and productivity change in UK banking. Applied Financial Economics 2001,

41. Neal P. X-Efficiency and Productivity Change in Australian Banking. Australian Economic Papers 2004,

42. Sathye M. Efficiency of banks in a developing economy: The case of India. European Journal of Operational Research 2003, 148, 662–671,

43. Paxton J.A. Technical Efficiency in the Rural Financial Sector: Evidence from Mexico. The Journal of Developing Areas 2006,

44. Das A.; Ghosh S. Financial deregulation and efficiency: An empirical analysis of Indian banks during the post reform period. Review of Financial Economics 2006,

45. Thoraneenitiyan N.; Avkiran N.K. Measuring the impact of restructuring and country-specific factors on the efficiency of post-crisis East Asian banking systems: Integrating DEA with SFA. Socio-Economic Planning Sciences 2009,

46. Matthews K.; Zhang N.X. Bank productivity in China 1997–2007: Measurement and convergence. China Economic Review 2010,

47. Chang M.; Jang H.B.; Li Y.M.; Kim D. The relationship between the efficiency, service quality and customer satisfaction for state-owned commercial Banks in China. Sustainability (Switzerland) 2017,

48. Novickytė L.; Droždz J. Measuring the Efficiency in the Lithuanian Banking Sector: The DEA Application. International Journal of Financial Studies 2018,

49. Cook W.D.; Seiford L.M.; Zhu J. Models for performance benchmarking: Measuring the effect of e-business activities on banking performance. Omega 2004,

50. Diallo B. Bank efficiency and industry growth during financial crises. Economic Modelling 2018,

51. Cevik, N.K.; Dibooglu, S.; Kutan, A.M. Real and financial sector studies in central and Eastern Europe: A review. Finance a Uver—Czech Journal of Economics and Finance 2016.

52. Ferreira C. Bank Efficiency, Market Concentration and Economic Growth in the European Union. SSRN Electronic Journal 2012,

53. Roghanian P.; Rasli A.; Gheysari H. Productivity Through Effectiveness and Efficiency in the Banking Industry. Procedia—Social and Behavioral Sciences 2012,

54. Fung M.K.; Cheng A.C.S. Convergence of total factor productivity among banks: Hong Kong’s experience. Global Finance Journal 2010,

55. Koutsomanoli-Filippaki A.; Margaritis D.; Staikouras C. Efficiency and productivity growth in the banking industry of Central and Eastern Europe. Journal of Banking and Finance 2009,

56. Řepková I. Efficiency of the Czech Banking Sector Employing the DEA Window Analysis Approach. Procedia Economics and Finance 2014,

57. Pathomsiri S.; Haghani A.; Dresner M.; Windle R.J. Impact of undesirable outputs on the productivity of US airports. Transportation Research Part E: Logistics and Transportation Review 2008,

58. Färe R.; Grosskopf S.; Lovell C.A.K.; Pasurka C. "Multilateral productivity comparisons when some outputs are undesirable: A non-parametric approach." Review of Economics and Statistics 1989,

59. Scheel H. Undesirable outputs in efficiency valuations. European Journal of Operational Research 2001,

60. Seiford L.M.; Zhu J. Modeling undesirable factors in efficiency evaluation. European Journal of Operational Research 2002,

61. Tone K. Slacks-based measure of efficiency in data envelopment analysis. European Journal of Operational Research 2001,

62. Assaf A.G.; Tsionas M.G.; Gillen D. Measuring firm performance: Differentiating between uncontrollable and controllable bad outputs. Tourism Management 2020,

63. George Assaf A.; Matousek R.; Tsionas E.G. Turkish bank efficiency: Bayesian estimation with undesirable outputs. Journal of Banking and Finance 2013.

64. Fujii H.; Managi S.; Matousek R. Indian bank efficiency and productivity changes with undesirable outputs: A disaggregated approach. Journal of Banking and Finance 2014,

65. Park K.H.; Weber W.L. Profitability of Korean banks: Test of market structure versus efficient structure. Journal of Economics and Business 2006,

66. Wang K.; Huang W.; Wu J.; Liu Y.N. Efficiency measures of the Chinese commercial banking system using an additive two-stage DEA. Omega (United Kingdom) 2014,

67. Barros C.P.; Managi S.; Matousek R. The technical efficiency of the Japanese banks: Non-radial directional performance measurement with undesirable output. Omega 2012,

68. Fukuyama H.; Weber W.L. A slacks-based inefficiency measure for a two-stage system with bad outputs. Omega 2010,

69. Fukuyama H.; Matousek R. Efficiency of Turkish banking: Two-stage network system. Variable returns to scale model. Journal of International Financial Markets, Institutions and Money 2011,

70. Andersen P.; Petersen N.C. A Procedure for Ranking Efficient Units in Data Envelopment Analysis. Management Science 1993,

71. Tone K. A slacks-based measure of super-efficiency in data envelopment analysis. European Journal of Operational Research 2002,

72. Noura A.A.; Hosseinzadeh Lotfi F.; Jahanshahloo G.R.; Fanati Rashidi S. Super-efficiency in DEA by effectiveness of each unit in society. Applied Mathematics Letters 2011,

73. Zimková E. Technical Efficiency and Super-efficiency of the Banking Sector in Slovakia. Procedia Economics and Finance 2014,

74. Hsiao B.; Chern C.C.; Chiu Y.H.; Chiu C.R. Using fuzzy super-efficiency slack-based measure data envelopment analysis to evaluate Taiwan’s commercial bank efficiency. Expert Systems with Applications 2011,

75. Khodabakhshi M.; Asgharian M.; Gregoriou G.N. An input-oriented super-efficiency measure in stochastic data envelopment analysis: Evaluating chief executive officers of US public banks and thrifts. Expert Systems with Applications 2010, 37, 2092–2097,

76. Avkiran N.K. Association of DEA super-efficiency estimates with financial ratios: Investigating the case for Chinese banks. Omega 2011,

77. Ali Rizvi S.F. Post-liberalisation efficiency and productivity of the banking sector in Pakistan. Pakistan Development Review 2001.

78. Iimi A. Efficiency in the Pakistani banking industry: Empirical evidence after the structural reform in the late 1990s. Pakistan Development Review 2003

79. Akhtar M.H. X-efficiency analysis of commercial banks in Pakistan: A preliminary investigation. Pakistan Development Review 2002

80. Ataullah A.; Cockerill T.; Le H. Financial liberalization and bank efficiency: A comparative analysis of India and Pakistan. Applied Economics 2004,

81. Kiani A. A Comparison of Domestic Vs Foreign Banks Using Stochastic Frontier Approach. THE LAHORE JOURNAL OF ECONOMICS 2005,

82. Qayyum, A.; Khan, S. X-efficiency, scale economies, technological progress and competition: A case of banking sector in Pakistan. PIDE Working Papers 2007.

83. Akmal M.; Saleem M. Technical efficiency of the banking sector in Pakistan. SBP Research Bulletin 2008, 4, 61–80.

84. Ahmed U.; Farooq S.; Jalil H.H. Efficiency dynamics and financial reforms: Case study of Pakistani banks. International Research Journal of Finance and Economics 2009, 1, 172–182.

85. Akhtar M.H. X-efficiency analysis of commercial banks in Pakistan: A preliminary investigation. International Management Review 2010, 6, 12–24.

86. ur Rehman, R.; Raoof, A. Efficiencies of Pakistani banking sector: A comparative study. International Research Journal of Finance and Economics 2010.

87. Nazir, M.S.; Alam, A. The Impact of Financial Restructuring on the Performance of Pakistani Banks: A DEA Approach. The IUP Journal of Applied Finance 2010.

88. Ahmad, U. Financial reforms and banking efficiency: Case of Pakistan. MPRA 2011.

89. Haque A.; Tariq A. Efficiency of Banks in Pakistan: A Non Parametric Approach. Business and Economic Research 2012,

90. Qayyum A.; Riaz K. Technical Efficiency of Pakistani Banks: An Application of Bootstrapped Data Envelopment Analysis Approach. World Applied Sciences Journal 2012.

91. Mustafa S.; Mehmood B. Efficiency Change in Pakistan Commercial Banking Sector: A Pre and Post Digital-Restructuring Analysis. Journal of Emerging Economies and Islamic Research 2015, 3, 1–10.

92. Zhu N.; Shah W.U.H. A Cross-Country Comparison of Operational Efficiency between Chinese and Pakistani Commercial Banking Industries An overview of the Chinese and Pakistani banking industries. International Journal of Operational Research/Nepal—IJORN 2019, 8, 1–11.

93. Zhu, N.; Ul, W.; Shah, H.; Abdul, M.; Yasmeen, R. Efficiency and productivity analysis of Pakistan’ s banking industry: A DEA approach. 2020.

94. Kwan S.; Eisenbeis R.; Kwan S.; Eisenbeis R. An analysis of inefficiencies in banking: a stochastic cost frontier approach. Economic Review-Federal Reserve Bank of San Francisco 1996.

95. Altunbas Y.; Liu M.H.; Molyneux P.; Seth R. Efficiency and risk in Japanese banking. Journal of Banking and Finance 2000,

96. Fan L.; Shaffer S. Efficiency versus risk in large domestic US banks. Managerial Finance 2004,

97. Girardone C.; Molyneux P.; Gardener E.P.M. Analysing the determinants of bank efficiency: The case of Italian banks. Applied Economics 2004,

98. Karim M.Z.A.; Chan S.G.; Hassan S. Bank efficiency and non-performing loans: Evidence from malaysia and Singapore. Prague Economic Papers 2010,

99. Stephen Kingu P.; Macha D.S.; Gwahula D.R. Impact of Non-Performing Loans on Bank’s Profitability: Empirical Evidence from Commercial Banks in Tanzania. International Journal of Scientific Research and Management 2018,

100. Hughes J.P.; Mester L.J. Who said large banks don’t experience scale economies? Evidence from a risk-return-driven cost function. Journal of Financial Intermediation 2013,

101. Wheelock D.C.; Wilson P.W. Do Large Banks Have Lower Costs? New Estimates of Returns to Scale for U.S. Banks. Journal of Money, Credit and Banking 2012,

102. Feng G.; Serletis A. Efficiency, technical change, and returns to scale in large US banks: Panel data evidence from an output distance function satisfying theoretical regularity. Journal of Banking and Finance 2010,

103. Kovner A.; Vickery J.; Zhou L. Do big banks have lower operating costs? Journal of Financial Perspectives 2015.

104. Khalil R., & Khalil M. A. (2017). Does Bank Size and Operational Efficiency Matters? An I mpact of Financial Gearing and Asset Management on Islamic Bank’s Performance in Pakistan. Journal of Accounting and Finance in Emerging Economies. https://doi.org/10.26710/jafee.v3i1.160

105. Khan M.K.; Ammar Zahid R.M.; Saleem A.; Sági J. Board composition and social & environmental accountability: A dynamic model analysis of chinese firms. Sustainability (Switzerland) 2021,

106. Zahid R.M.A.; Simga-Mugan C. An Analysis of IFRS and SME-IFRS Adoption Determinants: A Worldwide Study. Emerging Markets Finance and Trade 2019,

107. Saksonova, S. Net Interest Margin As an Indicator of Bank Asset and Liability Management. In Proceedings of the 8Th International Days of Statistics and Economics; 2014; pp. 1314–1325.

108. Bandaranayake, S.; Jayasinghe, P. Factors Influencing the Efficiency of Commercial Banks in Sri Lanka. Research Gate 2013.

109. Tone K. Dealing with undesirable outputs in DEA: a Slacks-Based Measure (SBM) approach. Oper. Res. Soc. Jpn 2004, 44–45.

110. Avkiran N.K. The evidence on efficiency gains: The role of mergers and the benefits to the public. Journal of Banking and Finance 1999, 23, 991–1013,

111. Manuel Arellano and Stephen Bond Some Tests of Specification for Panel Data: Monte Carlo Evidence and an Application to Employment Equations. Review of Economic Studies 1991.

112. Bond, S.; Hoeffler, A. GMM Estimation of Empirical Growth Models. CEPR Discussion Papers / Centre for Economic Policy Research Discussion Papers 2001.

113. Blundell R.; Bond S. Initial conditions and moment restrictions in dynamic panel data models. Journal of Econometrics 1998,

114. Bautista Mesa R.; Molina Sánchez H.; Ramírez Sobrino J.N. Main determinants of efficiency and implications on banking concentration in the European Union. Revista de Contabilidad-Spanish Accounting Review 2014,

115. Andries A.M. The determinants of bank efficiency and productivity growth in the central and eastern european banking systems. Eastern European Economics 2011,

116. Saksonova S. The Role of Net Interest Margin in Improving Banks’ Asset Structure and Assessing the Stability and Efficiency of their Operations. Procedia—Social and Behavioral Sciences 2014,

117. Birchwood A.; Brei M.; Noel D.M. Interest margins and bank regulation in Central America and the Caribbean. Journal of Banking and Finance 2017,

118. Sathye Liu; Bank Interest Rate Margin, Portfolio Composition and Institutional Constraints. Journal of Risk and Financial Management 2019,

119. Ramli, N.A.; Mohammed, N.I.; Hussin, S.A.S.; Khairi, S.S.M. Investigating the effect of non-performing loans on technical efficiency in Malaysian banking sector. In Proceedings of the AIP Conference Proceedings; 2018.

120. Garza-García J.G. Determinants of bank efficiency in Mexico: A two-stage analysis. Applied Economics Letters 2012,

121. DeYoung R. Management Quality and X-Inefficiency in National Banks. Journal of Financial Services Research 1998,