It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
In this paper, an initial pressure adjustable explosion vessel was developed, and the effect of negative pressure, positive pressure (0.2–1.8 atm) different initial ambient pressure on the explosive shock wave generated by the explosion of explosives was studied. The relationships between the specific impulse, shock wave velocity, the amount of explosive gas products and the ambient pressure were analyzed for different initial pressure environments. It was found that: the overpressure of the blast shock wave decreases with the initial ambient pressure of the explosion, and there exists a negative pressure environment with a dramatic pressure decrease near 0.6 atm, defined as the super-sensitive negative pressure Pcr. The propagation velocity of an explosive wave increases with a decrease in the ambient pressure, and the propagation velocity at a pressure of 1.8 atm is four times less than the velocity at a pressure of 0.2 atm. The production of explosive gas products did not change. The greater the initial pressure of the environment where the explosive is located, the smaller the ratio of the gas generated by the explosion to the initial force gas in the explosion vessel is, and the greater the impact on the propagation of shock waves is. The maximum attenuation of the first specific impulse i1 is 72.97% and the maximum attenuation of the second specific impulse i2 is 72.39%. The experiments provide reference data for high-altitude military confrontation, high-altitude weapons and ammunition development, and deep-earth protection engineering.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Anhui University of Science & Technology, School of Chemical Engineering, Huainan, China (GRID:grid.440648.a) (ISNI:0000 0001 0477 188X)
2 Anhui University of Science & Technology, School of Chemical Engineering, Huainan, China (GRID:grid.440648.a) (ISNI:0000 0001 0477 188X); Engineering Laboratory of Explosive Materials and Technology of Anhui Province, Huainan, China (GRID:grid.440648.a)
3 BGRIMM Technology Group, Beijing, China (GRID:grid.464247.7) (ISNI:0000 0001 0176 2080)
4 Anhui University of Science & Technology, School of Civil Engineering and Architecture, Huainan, China (GRID:grid.440648.a) (ISNI:0000 0001 0477 188X)