Introduction
Electrical signals provide an active mechanism for the rapid delivery of information across noisy cells and tissues. Prominent examples of this phenomenon across kingdoms include excitable neuronal circuits (Aron and Yankner, 2016), plant defense signaling (Masatsugu, 2018), and metabolic coordination of biofilm growth (Prindle et al., 2015). These seemingly different forms of electrical signaling involve ion channels. Outward-rectifying potassium channels release potassium from the intracellular reservoir to the extracellular space, thereby allowing for potassium exchange between neighboring cells (Debanne et al., 1997). A rapid gating of ion channels at the subcellular level maintains the balance in the plasma membrane potential (PMP), which is central to cell electrophysiology (Naundorf et al., 2006).
The activity of potassium channels can be locally modulated by voltage-gating, mechanical or light stimulus, and external ligands. In the last decade, advances in optogenetics and chemical biology of ion channels have powered numerous medical applications through local regulation of electrical activity in living cells with the ultimate goal of treating major life-threatening diseases (Gradinaru et al., 2010; Häfner and Sandoz, 2022; Snyder, 2017; Montnach et al., 2022). Interestingly, recent studies indicate the spatial–temporal regulation of ion channel expression and membrane potential status is critical for landmarking pathological conditions such as cardiac arrhythmia, epilepsy, or various types of cancer (Rosati and McKinnon, 2004; Lastraioli et al., 2015; Zsiros et al., 2009; Niemeyer et al., 2001; Biasiotta et al., 2016). However, a major challenge is to achieve rational control of ion channels on extended spatial–temporal scales. Such a strategy would provide a basis foundation for advanced applications in treating epilepsy, chronic pain, irregular heartbeats, or potentially various types of cancer. Nevertheless, there is a lack of experimental models allowing a guided modulation of eukaryotic cell electrophysiology through modulation of ion channel expression.
To address this challenge, we build a synthetic gene regulatory mechanism that is capable of controlling ion channel expression in the cell populations of the model eukaryote
Results and discussion
Controlling macroscopic ion channel expression through plant hormones
Chemical messengers or light can selectively control local activity of ion channels on the plasma membrane (Gradinaru et al., 2010; Häfner and Sandoz, 2022; Snyder, 2017; Montnach et al., 2022). In contrast, we sought to implement an alternative system for ion channel modulation by chemically coordinating the ion channel expression at the macroscopic level. To test this concept, we used a model eukaryote yeast
Figure 1.
Control of ion channel expression through open-loop circuit.
(A) Schematic of open-loop system driving expression of constitutively open KcsA* bacterial potassium channel. Activator IacR and repressor MarR (tagged with ODC degron; Takeuchi et al., 2008) are induced by galactose and repressed by auxin and salicylate, respectively (Pérez-García et al., 2021). (B) KcsA* contains plasma membrane localization (PM loc, green) and c-terminus mouse ODC degron (degron, black) sequences. (C) Schematic of microfluidic device used in the study. Flow channels widths were 120 μm for in the mixer module and 500 μm in main channels. The approximate height of channels was 25 μm. Cell traps had 500 × 500 μm size and height of approximately 7 μm. Loading direction is marked with green arrows, while anticipated flow in the experiment with black arrows. Time traces (D) and heat map (E) of Thioflavin T (ThT) fluorescence in control yeast strain do not show any organized features under 3-hr periodic phytohormone stimuli. (F–I) ThT fluorescence changes in the open-loop circuit (A) under 3-hr periodic phytohormone stimuli show distinct fluctuations (F, G), yet broad period distribution (H) and low synchronicity of ~50% (I). Periods of peaks were measured for all measured trapping regions without averaging as shown in (H). (I) Synchrony index is measured for all
Figure 1—figure supplement 1.
The plasmids used for open-loop circuit.
Galactose-inducible activator (IacR) and repressor (MarR) constructs are shown. The potassium channel (KcsA*) plasmid contains a synthetic minimal promoter with IacR and MarR operator sites.
Figure 1—figure supplement 2.
Thioflavin T (ThT) cationic dyes show linear response to external potassium applications and high stability compared to other plasma membrane potential (PMP) dyes.
Screenshots from microscopy imaging of yeast after 24 hr in different KCl concentrations, and quantification of mean ThT (A), DIBAC4(3) (B), and Dis-C3(3) (C) fluorescence (upper panels) for independent biological replicates (
Figure 1—figure supplement 3.
Autocorrelation and peak analysis of Thioflavin T (ThT) traces in control and open-loop system.
(A) Cumulative autocorrelation of ThT traces in control strain averaged across
Figure 1—video 1.
The absence of Thioflavin T (ThT) oscillations in the control strain.
Related to Figure 1D. Left panel, differential interference contrast (DIC), middle panel, ThT (cyan), and right panel, ThT color coded in heat map colors (blue [low signal], red [high signal]) of the sampled yeast colony grow in microfluidics device with 3-hr cycles of phytohormone stimuli.
Figure 1—video 2.
Weakly coupled Thioflavin T (ThT) oscillations in the strain integrating the open-loop synthetic circuit.
Related to Figure 1F. Left panel, differential interference contrast (DIC), middle panel, ThT (cyan), and right panel, ThT color coded in heat map colors (blue [low signal], red [high signal]) of the sampled yeast colony grow in microfluidics device with 3-hr cycles of phytohormone stimuli.
It is known that the overexpression of potassium channel TOK1 in yeast leads to PMP hyperpolarization (Sesti et al., 2001). Therefore, in theory, our strategy would allow a direct control of ion channel activity through coordinated modulation of gene expression levels, leading to global alterations of PMP. In our system changes in channel expression would cause associated changes in PMP primarily based on the temporal status of phytohormones in the environment (Figure 1A). Importantly, a voltage-gated channel opening, dependent on internal metabolic processes, could be attenuated by the use of constitutively open ion channel (Figure 1B). Thus, we used an open bacteria potassium channel KcsA* (Doyle et al., 1998; Cuello et al., 2010; Sun et al., 2020) as the output module of the synthetic circuit (Figure 1B, Figure 1—figure supplement 1). To create a dynamic environment, we employed controlled conditions on the microfluidic chip where yeast can grow under continuous media perfusion stimulated with antithetic pulses of SA and IAA with the regulable frequency (Figure 1C). To monitor PMP changes we have tested several commonly used dyes in yeast such as DIBAC4(3), DIS-C3(3), and cationic dye Thioflavin T (ThT) (Peña et al., 2020) and we found that a ThT outperforms other dyes in terms of stability, fluorescence level, low hydrophobicity (Peña et al., 2020), and near-linear response to potassium clamp experiments (Figure 1—figure supplement 2A–C). Finally, all these features of ThT were ideal for the long-term microfluidics experiments when stability, fluorescence, and low absorption in PDMS are critical.
Under coordinated changes of IAA and SA in the environment, the control strain that lacks the synthetic circuit (Figure 1A) does not show any regular changes in ThT fluorescence over time (Figure 1D, E and Figure 1—figure supplement 3A, Figure 1—video 1). Whereas the open-loop circuit driving KcsA channel in yeast (Figure 1A, B) showed noisy but recognizable fluctuations of ThT fluorescence with weak coupling between colonies detected by cumulative autocorrelation analysis (Figure 1F, G, Figure 1—figure supplement 3B, Figure 1—video 2). The period of ThT fluorescence showed a broad distribution around the phytohormone stimuli period (Figure 1H and Figure 1—figure supplement 3C). Also, there was a substantial variability in amplitudes (Figure 1—figure supplement 3E) but less of peak widths (Figure 1—figure supplement 3D). To complement autocorrelation analysis, we developed a quantitative metric of ‘synchrony index’ defined as 1
Encoding dual-feedback regulation increases speed and robustness of response in yeast collectives
To further improve the performance of our system we sought to design a closed-loop feedback circuit that could encode features such as fast responsiveness (due to feedback) and demonstrate noise filtering capability of excitable systems (Lindner et al., 2004). For that we coupled IacR and MarR through positive and negative feedback loops in the dual-feedback synthetic gene circuit (Figure 2A). To analyze the robustness and dynamics of the designed circuit we first performed computer model simulations of this IacR–MarR feedback system and identified regimes that demonstrate the prominence for the excitable dynamics (Figure 2B and Figure 2—figure supplement 1). Model predictions revealed minimal prerequisites for the transit between steady state (Figure 2—figure supplement 1A), excitability (Figure 2B, Figure 2—figure supplement 1B), and oscillations (Figure 2—figure supplement 1C). These conditions directly relate to the ratio of IacR–MarR deactivation which depends primarily on IAA and SA changes (Figure 2D, Figure 2—figure supplement 1A–C).
Figure 2.
A synthetic dual-feedback circuit coordinates ion channel expression in yeast communities.
(A) Schematic of dual-feedback circuit controlling downstream expression of bacterial potassium channel KcsA*. All components of the system are controlled by the same promoter to allow integration of both positive and negative feedbacks. (B) Computer model simulations of a synthetic dual-feedback circuit in the excitable regime. (C) Checking for a refractory period in dEGFP circuit reporter response under two long 12-hr pulses of auxin (green boxes). Time-lapse traces from microfluidic device are shown with the mean trend (black curve). Note inability of cell to respond to second pulse of IAA. (D) Computer model simulation of a circuit subjected to series of antithetic pulses of SA (black box inability) and IAA (green box). (E) Experimental time traces of dEGFP fluorescent marker under 2-hr antithetic pulses of SA and IAA. Note consistency of period between different yeast colonies and some level of variability in peak amplitudes. (F) Heat maps of time traces for
Figure 2—figure supplement 1.
Computer model simulations of IacR–MarR feedback circuit.
Computer simulations of a dual-feedback circuit model (upper panel) and corresponding phase portraits with nullclines (lower panel) for the different ratio of IacR–MarR receptor turnover (1:1 (A), 10:1 (B), and 10:2 (C)). Stable states are marked with black-filled circles and unsteady states with a green empty circle, respectively. Note that a higher turnover ratio produces the transition into an excitable regime around the unstable state (B).
Figure 2—figure supplement 2.
Plasmids used to construct dual-feedback circuit and engineered ion channels.
Activator (IacR), repressor (MarR), and destabilized reporter (dGFP) constructs are shown. All components are controlled from the same synthetic promoter containing IacR and MarR operator sites. The potassium channel (KcsA-EGFP) plasmid contains a synthetic minimal promoter with IacR and MarR operator sites driving c-terminal fusion of KcsA* with EGFP reporter. TOK1* channel was constructed by fusing degron to c-terminal of native
Figure 2—figure supplement 3.
Excitable control of circuit output with the pair of phytohormones.
A heat map of circuit response recorder with dEGFP reporter (upper panel) to chemical gradients (lower panel). Note a precise control of circuit output is possible by using a dual phytohormone strategy. Mean measurements from three biological replicates (
Figure 2—figure supplement 4.
Time-lapse synthetic circuit characterization using high-throughput fluorescence assays.
dEGFP fluorescence normalized to OD600 (upper panel) and OD600 absorbance (lower panel) for 24-hr measurements using graded changes of phytohormones was used to analyze the excitable potential of the synthetic circuit. Mean measurements with variation (shaded regions) from three biological replicates (
Figure 2—figure supplement 5.
The frequency of phytohormone stimuli determines the dynamics of the reporter gene under different environmental drivers.
(A–E) Left panel, dEGFP time evolutions from all traps recorded in the microfluidic device. Right panel, the heat map of dEGFP fluorescence for each of the recorded trapping regions corresponds to time traces (left panel). (A) Periodic 2-hr phytohormone wave of sine shape, 1-hr periodic waves of square (B) and sine (C) shapes. Thirty minutes periodic wave of square (D) and sine (E) shapes, respectively. Note that the frequency of dEGFP firings mirrors exactly that of the chemical microenvironment. Color coding is as in Figure 2. Each experiment has been repeated at least two times with similar results.
Figure 2—figure supplement 6.
Analysis of response characteristics under different environments.
(A) A distribution of dGFP periods for three different frequencies of stimuli, as marked with corresponding colors. (B) Violin plot of peak amplitude distribution in all recorded yeast communities for different stimuli periods. (C) Peak widths variation decreases with higher frequencies of stimuli. Violin plots represent medians (white dots), interquartile zones (gray bars) and 95% confidence levels (solid gray line).
Figure 2—figure supplement 7.
Tracking dynamics of KcsA* potassium channels under phytohormone rhythms.
(A) Time evolution of KcsA-EGFP reporter traces under indicated pulses of phytohormones (3-hr period). An average trace of
Figure 2—video 1.
Dual-feedback gene circuit shows coordinated oscillations of fluorescence marker.
Related to Figure 2E. Left panel, dfferential interference contrast (DIC), middle panel, dEGFP (cyan) and mCherry (cell marker), and right panel, dEGFP color coded in heat map colors (blue [low signal], red [high signal]) of the sampled yeast colony grow in microfluidics device with 2-hr cycles of phytohormone stimuli.
Figure 2—video 2.
Dynamics of KcsA-EGFP fluorescent reporter in the dual-feedback circuit show coherent oscillations under 3-hour cycles of phytohormone stimuli related to Figure 2—figure supplement 7.
Left panel, differential interference contrast (DIC), middle panel, dEGFP (cyan) and mCherry (cell marker), and right panel, dEGFP color coded in heat map colors (blue [low signal], red [high signal]).
To test initially our computer model, we implemented a synthetic feedback circuit composed of IacR tagged with herpes simplex virus trans-activation domain (VP64) (Hagmann et al., 1997), MarR tagged with repression Mig1 silencing domain (Ostling et al., 1996; Figure 2A, Figure 2—figure supplement 2), and unstable dEGFP fluorescent reporter (Dantuma et al., 2000). All three components of the circuit were placed under control of the same synthetic promoter carrying MarR and IacR operator sites (Pérez-García et al., 2021). We found that this dual-feedback circuit responds sharply to SA–IAA gradient and shows excitable-like dynamics characterized by transient response peak in the absence of periodic hormone stimulus (Figure 2—figure supplements 3 and 4). Furthermore, we confirmed that the long step-like stimulation with IAA in dynamic microfluidic setup resulted in refractory dynamics of dEGFP signal after IAA removal (Figure 2C), characterized by transient response peak similar to that observed in the static environment (Figure 2—figure supplement 4) and in our computer model simulations (Figure 2B).
Next, we impose cyclic applications of IAA and SA with defined periods to guide gene expression patterns across yeast colonies. Spatially coordinated pulses of dEGFP were observed under various phytohormone stimulations of 2 hr, 1 hr, and 30 min (Figure 2E, F, and Figure 2—figure supplement 5, Figure 2—video 1) which are in a good agreement with computer model simulations (Figure 2D). The coordinated gene expression was confirmed by the analysis of cumulative dEGFP signal autocorrelation (Figure 2G), period distribution (Figure 2H, Figure 2—figure supplement 6A), complemented by peak characteristic analysis (Figure 2—figure supplement 6B, C). Importantly, we quantified that ~95% of all communities show coordinated peaks of dEGFP fluorescence (Figure 2I). Finally, to confirm that phytohormone changes directly control ion channel dynamics, we tested whether observed dynamics of circuit actually control of the ion channel expression. For that we fused KcsA* potassium channel (Figure 1B) with EGFP to monitor directly the life span of the channel under control of a feedback circuit. Indeed, phytohormone stimuli lead to coordinated spikes of KcsA-EGFP fluorescence mimicking that of dEGFP fluorescent marker, indicating that our circuit specifically controls the amount of heterologous ion channels inside the cell under guidance of phytohormones (Figure 2—figure supplement 7, Figure 2—video 2).
In summary, this chemically excited circuit presents a plausible regulatory module for engineering macroscopically coordinated ion channel expression in yeast cell populations.
Coupling feedback circuit to PMP changes at the population level by engineered potassium channels
We have demonstrated that dual-feedback circuit shows characteristics of excitable system that robustly controls the ion channel expression in yeast cell collectives. Next, we tested how these changes in ion channel presence would reflect upon PMP changes by measuring ThT cationic dye fluorescence dynamics. In particular, we asked if the close-loop system (Figure 3A) would outperform our open-loop system (Figure 1A).
Figure 3.
Global modulation of ion channel expression and plasma membrane potential (PMP) in yeast communities through phytohormones.
(A) Representative time traces of Thioflavin T (ThT) fluorescence per community (
Figure 3—figure supplement 1.
Characterization of synchronicity of Thioflavin T (ThT) fluorescence in dynamically changing environment.
Time evolutions of ThT fluorescence across communities in 3 hr (A) and 1 hr (B) lasting phytohormone stimuli. Average traces are shown in black (C, D), kymographs related to (A) and (B) for
Figure 3—figure supplement 2.
Synchronicity analysis of TOK1*-based circuit controlling plasma membrane potential (PMP) in yeast communities.
(A) Cumulative autocorrelation analysis of cumulative trend across all measured communities for 2 hr (black line) shows coherent oscillations in Thioflavin T (ThT) fluorescence. Peak amplitudes (B), periods (C), and widths (D) recorded in yeast communities that integrate the TOK1*-based synthetic circuit. (E) Synchrony index recorded for yeasts engineered with TOK1*-containing circuit in total (
Figure 3—video 1.
Thioflavin T (ThT) oscillations controlled by phytohormone rhythms (2-hr stimuli) for yeast transformed with KcsA*-based circuit.
Related to Figure 3A. Left panel, differential interference contrast (DIC), middle panel, ThT (cyan), and right panel, ThT color coded in heat map colors (blue [low signal], red [high signal]) of the sampled yeast colony grow in microfluidics device with 2-hr cycles of phytohormone stimuli.
Figure 3—video 2.
Thioflavin T (ThT) oscillations controlled by phytohormone rhythms (3-hr stimuli) for yeast transformed with KcsA*-based circuit.
Related to Figure 3—figure supplement 1A. Left panel, differential interference contrast (DIC), middle panel, ThT (cyan), and right panel, ThT color coded in heat map colors (blue [low signal], red [high signal]) of the sampled yeast colony grow in microfluidics device with 3-hr cycles of phytohormone stimuli.
Figure 3—video 3.
Thioflavin T (ThT) oscillations controlled by phytohormone rhythms (1-hr stimuli) for yeast transformed with KcsA*-based circuit.
Related to Figure 3—figure supplement 1B. Left panel, differential interference contrast (DIC), middle panel, ThT (cyan), and right panel, ThT color coded in heat map colors (blue [low signal], red [high signal]) of the sampled yeast colony grow in microfluidics device with 1-hr cycles of phytohormone stimuli.
Figure 3—video 4.
Thioflavin T (ThT) oscillations controlled by phytohormone rhythms (2-hr stimuli) for yeast transformed with TOK1*-based circuit.
Related to Figure 3G. Left panel, differential interference contrast (DIC), middle panel, ThT (cyan), and right panel, ThT color coded in heat map colors (blue [low signal], red [high signal]) of the sampled yeast colony grow in microfluidics device with 2-hr cycles of phytohormone stimuli.
Next, we grew engineered yeasts carrying a dual-feedback circuit in the microfluidic device that was subjected to different frequencies of SA and IAA stimuli (3, 2, and 1 hr, respectively). We could observe cyclic bursts of ThT fluorescence that were remarkably consistent across cell populations in long-term experiments (Figure 3A, B, and Figure 3—videos 1–3). Cumulative autocorrelation and synchronicity analyses confirmed further the robustness of temporal response on the macroscopic scale (Figure 3C, D). The faster pace of environmental changes led to somehow less robust response possibly due to toxic effect of upregulation ion channels in short time periods (Figure 3D, Figure 3—figure supplement 1, Figure 3—video 3). Interestingly, while peak width and period were very consistent between different yeast colonies, we observed visible variation in amplitudes of ThT fluorescence (Figure 3E). These could be due to subtle differences in relative levels of KcsA* channels produced by each cell as observed in our experimental data (Figure 2—figure supplement 7) but also to inherent noise nature of gene expression. Nevertheless, our experiments indicate that dual-feedback integration in our original open-loop circuit significantly improves the robustness of ion channel control, resulting in coordinated modulation of ion channel expression and consequently organized changes of PMP across eukaryotic cell communities.
The PMP of yeast is regulated through voltage-gated potassium channels such as the outward-rectifier channel TOK1 (Martinac et al., 2008; Mackie and Brodsky, 2018). TOK1 is the main target for several toxins and volatile anesthetic agents (Ahmed et al., 1999), which cause uncontrolled opening and leakage of potassium ions to the extracellular space. Overexpression of TOK1 causes membrane hyperpolarization (more negative PMP) while
For that purpose, we constructed TOK1* channel by tagging degron domain at c-terminus of TOK1 to decrease half-life of the channel and thus increase its dynamics similar to that of KcsA* construction. Then we plugged our feedback circuit to control TOK1* expression levels on the macroscopic level (Figure 3F). We recorded ThT fluorescence changes over time under pulses of IAA and SA. Similarly, to KcsA* we observed consistent ThT pulses across number of independent yeast colonies (Figure 3G, H, Figure 3—video 4) as exemplified by persistence of pulsing period and synchronicity (Figure 3—figure supplement 2). Again, the autocorrelation analysis revealed a dominant pattern of ThT changes monitored across yeast colonies (Figure 3—figure supplement 2). These data indicate that our dual-feedback circuit can indeed control also the expression of native channels to modulate its activity by controlling the number of TOK1* transcripts available in the cell. Therefore, our findings highlight a generality of strategy that includes engineered dual-feedback system for controlling potassium channels and PMP through environmental rhythms.
Concluding remarks
In the last decade, many efforts have been invested into developing new methods for the local control of ion channel activity with light or chemical signals. In contrast, mechanisms controlling ion channel expression have received substantially less attention, despite their importance in cardiac, neurological disorders and various forms of cancer. Here, we demonstrate a synthetic biology model for the control of potassium channel expression on macroscopic scales in eukaryotic cell populations. As a proof-of-concept, we tested this chemically driven mechanism in yeast to access the general suitability of our strategy for tuning cell electrophysiology at the population level. We demonstrated that a synthetic gene circuit controls ion channel dosage in each individual cell that is dictated by environmental input with selective frequencies. Changes in ion channel expression correlate with changes of PMP as shown by cationic dye translocation to the cell interior with increased fluorescence. Both heterologous and native channels were used as effectors of dual-feedback system to control PMP in yeast cells. Whereas the lack of feedback causes a noisy control of PMP, highlighting strong benefits of using dual-feedback regulation for the robust PMP control.
This work opens new avenues in the field of synthetic biology and cellular engineering by enabling a transformation of clocked chemical cues into coordinated ion channel expression without need for apparent cell-to-cell coupling. Our work proposes that coherent changes of ion channel expression can adjust electrical activity in growing cell populations and on extended spatial–temporal scales. Furthermore, our circuit could be potentially plugged into native context where timed processes would control circuit components endogenously and connect circuit output to native ion channel dosage. Nevertheless, our initial, proof-of-concept study produces some variability in response amplitudes. Therefore, future studies are needed to establish systems with improved response robustness to timed inputs, potentially leading to the creation of powerful toolboxes for controlling macroscopic electrophysiology across the tree of life. Practically, controlling locally and globally ion channel expression holds a key to designing more effective therapies providing the control of electrical status of abnormal cells in a broad spectrum of diseases.
Materials and methods
Strains and plasmid constructions
Constructs were cloned using isothermal Gibson assembly cloning. A middle-copy (~10–30 copies) episomal plasmid pGADT7 (Takara Bio Inc) was used to increase the concentration of proteins to buffer for the effects of intrinsic molecular noise and selected using different auxotrophic selection markers (Leucine, Uracil, and Histidine). Iacro/MarRo promoter and either standard CYC1 or ADH1 yeast terminators were cloned into activator or repressor plasmids (Figure 1—figure supplement 1). MarR, IacR, and KcsA* were codon optimized for yeast and synthesized using services delivered by Integrated DNA Technologies (IDT). The reporter plasmids include synthetic minimal promoters (synthesized with IDT) with previously identified MarR or IacR operator (Alekshun et al., 2001; Shu et al., 2015) sequences upstream TATA-box and minimal CYC1 promoter and fast-degradable UBG76V-EGFP (dEGFP) (Dantuma et al., 2000). KcsA bacterial potassium channel was engineered to include open configuration mutations as previously described (Cuello et al., 2010; Sun et al., 2020) and modified further to include plasma membrane localization signals and c-terminus mouse ODC degron signal (Takeuchi et al., 2008). KcsA* or TOK1* replaces the dEGFP gene on the reporter plasmid, respectively (Figure 1—figure supplement 1 and Figure 2—figure supplement 2). PCR reactions were performed using Q5 high fidelity polymerase (New England Biolabs). Correct PCR products were digested with DpnI (New England Biolabs) to remove the template and subsequently cleaned up with a DNA cleanup kit (Zymo Research) before Gibson assembly. Constructs were transformed in ultra-competent cells from
Multiwell plate and microscopy fluorescence measurements
Overnight culture of the yeast grown in 2% sucrose low fluorescence media (Formedium, UK) was diluted 100× and pipetted directly to a 96-well plate containing 2% sucrose and gradient of SA and IAA concentrations. Plates were incubated at 30° C overnight and well mixed by shaking before performing measurements. Measurements were done with the Thermo Scientific VarioskanTM LUX multimode microplate reader after 24 hr or were recorded every 10 min to generate a time-lapse profile of the dEGFP and OD600. OD600 was set at an absorbance of 600 nm wavelength, the fluorescence excitation and emission light at 488 and 517 nm wavelength for dEGFP. The PMP reporter activity was analyzed by measuring dye expression using potassium clamp experiments 24 hr after staining. Overnight cultures were diluted to a total OD600 of 0.1. KCl at different concentrations was added to the diluted cultures. Aliquotes of 200 µl were pipetted from these diluted cultures to a multi-well plate containing different KCl concentrations (0, 50, 100, 200, and 400 mM) and 10 µM Thioflavin T, 10 µM DIBAC4(3), and 10 µM DIS-C3(3) for a direct comparison. Plates were incubated at 30°C overnight. The next day, each well was imaged in two different channels: differential interference contrast (DIC) and GFP (
Time-lapse imaging, growth conditions, and data analysis
Live-cell imaging was performed on the Automated inverted Leica DMi8 fluorescence microscope equipped with Hamamatsu Orca Flash V3 camera that was controlled by Micro-Manager v.2.0 (https://micro-manager.org/). Images were captured with ×40 dry objective NA = 0.8 (Leica Inc). Traps containing cells were imaged every 10 min on three different channels (DIC, GFP Excitation: 488, Emission: 515, and mCherry Excitation: 583, Emission: 610) with CoolLed pE600 LED excitation source and standard Chroma epifluorescent filter set. Experiments were run for up to 72 hr under the continuous supply of nutrients in the microfluidic device. Acquired images were initially processed in Fiji 2.0 (https://imagej.net/Fiji) using custom scripting to extract positions with exponentially growing yeast cells. Constitutively expressed mCherry marker was used to identify exponentially growing cells and used to derive normalized dEGFP fluorescence: Dead or non-growing individuals were discarded by correcting dEGFP or KcsA-EGFP signal according to the formula
Mathematical model description
To derive a mathematical model of the excitable circuit (Figure 2B and Figure 2—figure supplement 1), we used a system of coupled ordinary differential equations adapted from previous theoretical studies (Lindner et al., 2004). Briefly, IacR and MarR protein concentrations change over time according to the following formulas:
(1)
(2)
where
To calculate nullclines we set the left-hand side of Equations 1 and 2 to 0 and setting and to 0. One can derive the following terms for calculation of phase portraits MarR*(IacR) and MarR**(IacR) (Figure 2—figure supplement 1A–C):
(3)
(4)
Cell loading procedure
All tubing lines were sterilized with ethanol and plugged into syringes or introduced in falcon tubes under sterile conditions. Fresh yeast colony was grown in low fluorescence media composition (Formedium, UK) with 2% sucrose as a carbon source or 2% glucose (K1 toxin-producing strain). The next day, yeast cultures were diluted 10–20 times approximately to 0.2–0.4 OD600 to obtain highly concentrated cells that were transferred to a 50-ml falcon tube for loading. 60-ml media syringes were filled with 25 ml of inducing media (2% sucrose + 0.5% galactose) with or without compounds and 50-ml waste falcon tubes were filled with 10 ml of Distilled De-Ionized water. Before loading, devices were vacuumed for at least 20 min to remove all the air from the channels and traps. Syringes and falcon tubes were placed on the height control system and lines were connected as follows: media syringes were plugged first and kept above all other inputs to prevent media contamination. Adjusting the height of the cells containing falcon tube as well as media and waste aids in controlling the cell seeding in the traps. Although many cells pass through the chip directly toward the waste port, few cells got captured via microvalves and seeded the traps. Once 10–20 cells were captured in each trapping region, the flow from the cell loading port was reverted by decreasing the height to the same level as for the auxiliary waste.
Microfluidic mold fabrication
Molds for the production of microfluidic device (Pérez-García et al., 2021) were designed in Inkscape and printed on plastic sheets with the monochrome laser printer at 1200 dpi resolution as described in Pérez-García et al., 2021. A density of Ink deposition was used to control the feature height. Plastic wafers were cut and transferred to the thermal oven set to 160°C to shrink by one-third of the original size, then baked again for 10 min to smoothen and harden the ink. Finally, molds were cleaned with soap, rinsed with isopropanol and DDI water and dried using a nitrogen gun, and secured with Scotch tape before use. Each cell trap is 500 × 500 × 7 μm size, hosting ~10,000 haploid yeast cells.
Soft lithography
Molds were introduced in plastic 90-mm Petri dishes and fixed with double-sided tape. Dowsil Sylgard 184 Polydimethylsiloxane (PDMS) was properly mixed in a 10:1 (wt/wt) ratio of elastomer and curing agent and stirred until the uniform consistency was achieved. Approximately 27 ml of the homogeneous mixture was poured into each Petri dish and completely degassed using the 8 CFM 2-stage vacuum pump for approximately 20 min. Degassed PDMS was cured at 80°C for 2 hr. Cured PDMS was removed from the Petri dish, separated from the wafer, and cut to extract the individual chips. Fluid access ports were punched with a 0.7-mm diameter World Precision Instruments (WPI) biopsy puncher and flushed with ethanol to remove any remaining PDMS. Individual chips were cleaned with ethanol and DDI water and Scotch tape to remove any remaining dirt particles.
Microfluidic device bonding
At least 1 day before use, individual chips and coverslips were cleaned in the sonic bath and rinsed in ethanol, isopropanol, and water. Both surfaces were exposed to Corona SB plasma treater (ElectroTechnics Model BD-20AC Hand-Held Laboratory Corona Treater) between 45 s and 1 min, then surfaces were brought together and introduced at 80°C in an oven overnight to obtain the enhanced bond strength.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
© 2022, García-Navarrete, Avdovic, Pérez-Garcia et al. This work is published under https://creativecommons.org/licenses/by/4.0/ (the “License”). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.
Abstract
Cells convert electrical signals into chemical outputs to facilitate the active transport of information across larger distances. This electrical-to-chemical conversion requires a tightly regulated expression of ion channels. Alterations of ion channel expression provide landmarks of numerous pathological diseases, such as cardiac arrhythmia, epilepsy, or cancer. Although the activity of ion channels can be locally regulated by external light or chemical stimulus, it remains challenging to coordinate the expression of ion channels on extended spatial–temporal scales. Here, we engineered yeast
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer